Pasar al contenido principal

EVOLUCION DE LA RED DE ACCESO RADIO HACIA 6G PARA SERVICIOS MASIVOS Y DE BAJA LATENCIA

PID2021-123168NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Assessment of Trigger-Based MU-OFDMA for Deterministic Wi-Fi 6 Operation on COTS Devices

  • Orozco-Santos, Federico
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
[EN] Wireless networks are increasingly considered for industrial and time-critical applications, where flexible deployment must be reconciled with predictable communication behaviour. IEEE 802.11ax introduces mechanisms such as Orthogonal Frequency Division Multiple Access (OFDMA), Trigger-based Uplink Access (TUA), and Target Wake Time (TWT) as part of ongoing efforts to support bounded latency and deterministic transmissions in Wi-Fi networks. However, the practical behaviour of these mechanisms depends not only on the standard, but also on what commercial devices expose, how access points implement scheduling decisions, and how trigger-based access, RU assignment, and timing control can be configured in real deployments. This paper therefore focuses on the practical implementation and experimental assessment of OFDMA-based deterministic operation using Wi-Fi 6 commercial off-the-shelf (COTS) hardware. The proposed configuration combines driver-level enabling of high-efficiency mechanisms with controlled testbed measurements and complementary simulations, allowing OFDMA operation to be compared against conventional single-user OFDM under realistic traffic and interference conditions. The results show that coordinated OFDMA operation on COTS devices improves temporal stability, reducing jitter by up to 23% and latency by approximately 44% with respect to single-user OFDM operation. The experiments also reveal practical effects that are central to deterministic-oriented Wi-Fi: simultaneous RU-based transmissions reduce contention-driven variability, TWT-based activity windows improve temporal alignment, and RU subdivision introduces a throughput trade-off that must be considered when dimensioning industrial traffic. Overall, the study provides empirical evidence that Wi-Fi 6 can support deterministic-oriented industrial communication when OFDMA, trigger-based access, and timing mechanisms are jointly configured, while also highlighting the implementation constraints that remain when moving from standard capabilities to COTS device behaviour., This work has been supported by the DITEC project "Ecosistema de Gemelos Digitales: Impulsando la Fabrica Autonoma" funded by Ministerio de Ciencia, Innovacion y Universidades of Spain MCIN/AEI/10.13039/501100011033, and FEDER UE, under Grant no. PLEC2024-011104, and by Evolution of the radio access network towards 6G for massive and low-latency services funded by ERDF A way of making Europe and Ministerio de Ciencia, Innovacion y Universidades of Spain MCIN/AEI/10.13039/501100011033 under Grant no. PID2021-123168NB-I00, and includes participations as part of the non-economic activity plan funded for the 2025 annuity by IVACE+i.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of combined network slicing and MEC towards mobile robot applications in 5G networks

  • Meseguer Valenzuela, Andrés
  • Vera-Pérez, Jose
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] Wireless communications have been used widely for monitoring purposes in different applications such as smart metering, environmental sensing, industrial asset tracking or healthcare monitoring. However, the enhancement of wireless technologies such as Wi-Fi and 5G NR provides new opportunities for innovative applications. Especially in robotics, improvements in terms of throughput, latency, and reliability are enabling new use cases that vary from remote teleoperation of mobile robots to edge processing of multi-robot fleet systems. These scenarios target the increase of energy efficiency, productivity and security of automated processes for industry. Verticals such as manufacturing are demanding due to the co-existence of humans and machines. These shared locations are sensitive to productivity issues such as deadlocks and bottlenecks for mobile robots, and security matters such as labor accidents. In this sense, mobile robots require the processing of sensor data to detect humans on time to avoid accidents. This application is limited by the computational costs to process data in robots using intelligent algorithms. Therefore, it is necessary to offload data from mobile robots to high-performance servers located in the network at lowest latency. From a communications perspective, this application provides a challenge to ensure that safety information, intended to avoid accidents, is transmitted properly while many elements are connected to the wireless network. Hence, the integration of slicing and edge processing capabilities remain essential to prioritize the offloading of robot sensor data. Following this scope, this work provides an evaluation of a current Network Slicing solution to support multiple stream for mobile robot applications, prioritizing an application of obstacle avoidance for human safety to showcase the relevance of slicing and edge process offloading capabilities in these scenarios., This work was supported in part by the ERDF A way of making Europe and the Ministerio de Ciencia, Innovación y Universidades of Spain (MCIN/ AEI/10.13039/501100011033) under Grant PID2021- 123168NB-I00 and in part by the Non-Economic Activity Plan funded for the 2025 Annuity by IVACE+i. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Environmentally Adaptive CRO-SL Algorithm Based on Dynamic Agents for the Channel Assignment Problem in Wireless Networks

  • Romero-Barrera, Antonio J.
  • de la Cruz-Piris, Luis
  • Marino Tejedor-Romero
  • Ivan Marsa-Maestre
  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
[EN] In recent decades, metaheuristic algorithms have emerged as indispensable tools for addressing complex optimization challenges, particularly in several engineering fields, where NP-hard problems are prevalent. A common NP-hard problem in communication engineering is the Channel Assignment Problem (CAP) for wireless access points (APs), with a determined number of stations (STAs) connected to them. The performance of the complete network depends on the interference and noise among the different clusters of devices and the obstacles or elements placed in the physical transmission space. To address the CAP, a new environmentally adaptive approach is proposed for the Coral Reefs Optimization with Substrate Layers (CRO-SL) algorithm, introducing new environmental agents: algae (representing tabu positions) and ocean water acidification (lowering fitness thresholds). The Environmentally Adaptive CRO-SL (EnvAdapt-CRO-SL) implementation aims to improve solution exploration, enhancing computational efficacy in generating new candidate solutions within the coral reef population. An exhaustive comparative analysis of four configurations of the proposed EnvAdapt-CRO-SL variant assesses the impact of each environmental agent on the algorithm's performance. Additionally, external benchmarks against four different metaheuristics, along with an analysis of the influence of pseudorandom number generators on initialization and search operators, and a robust optimization case study, provide deeper insights. The results show that incorporating the new environmental agents into the EnvAdapt-CRO-SL workflow significantly boosts throughput while reducing the computational time required to obtain optimal solutions., This work was supported in part by the MCIN/AEI/10.13039/501100011033 and the European Union ''NextGenerationEU''/PRTR under Project TED2021-131387B-I00; in part by the MCIN/ AEI/10.13039/501100011033/FEDER, UE under Project PID2021-123168NB-I00. In addition, this work has been partially funded by the projects SBPLY/23/180225/000160, which is funded by the EU through FEDER and by the JCCM through INNOCAM and WiDAI (CM/JIN/2021-004) of the Community of Madrid and University of Alcala.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Provenance Verification of Smart Contracts: Analysing the Cost of Ensuring Authenticity over the Logic Hosted in Blockchain Networks

  • Garcia-Valls, Marisol|||0000-0003-2383-5310
  • Chirivella-Ciruelos, Alejandro M.
[EN] The lack of sufficient guarantee about the authenticity of running smart contracts is a major entry barrier to blockchain networks. By authenticity,we refer to the smart contract ownership or provenance; this implies perfect matching between a published source-code and the corresponding running version of a given smart contract. Block verifiers are services that check the provenance authenticity of the logic contained in blockchain networks. Nevertheless, as a block verifier is an external verification service, it consumes time to use it; and the derived overhead may not comply with temporal requirements of time-sensitive domains like cyber-physical systems. Such systems require that the temporal cost of using external services is assessed prior to the final system deployment. To the best of our knowledge, there are no previous contributions on the determination of the temporal cost of the smart-contract provenance verification process. This paper presents the design and implementation of a middleware that assesses the temporal overhead of accessing the verification services; the middleware is hosted in the global ledger and runs the verification services over large sets of smart contracts. Our contribution is validated by providing an implementation on a real blockchain network, employing actual smart contract verifier logic, and analysing the temporal behavior of the overall system operations to comply with the time-sensitive requirements of cyber-physical systems., This research was funded by the following projects: Design of services for resilient and realtime execution of social dispersed computing applications in cyber-physical domains funded by Generalitat Valenciana (Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital), Spain, under grant No. AICO/2021/138. The APC was funded by AICO/2021/138 (Subvenciones para grupos de investigación consolidados). Also, this work has been supported by Grant PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe; and by project Green Networks: Towards environmental-friendly 6G Networks under grant TED2021-131387B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/RTRP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CoTwin: Collaborative improvement of digital twins enabled by blockchain

  • Garcia-Valls, Marisol|||0000-0003-2383-5310
  • Chirivella-Ciruelos, Alejandro Miguel
[EN] Integrating digital twin technology in Cyber-Physical Systems and Internet of Things can boost their intelligence. Given the current maturity of digital twin technology (yet in progress), improving the models that these systems use is typically achieved off-line, requiring the system to stop and reconfigure to run each new model version. In fact, most works use cloud back-ends to run heavy machine learning algorithms, imposing strict requirements on the data exchange between the physical system and the cloud. We address the online improvement of digital twin models in cyber-physical systems by supporting model refinement without disrupting nor stopping the normal operation of the system. This improves the dynamicity of the system that may turn into a major competitive advantage in a number of industrial scenarios. Precisely, we exploit the collaborative expectation of next generation cyber-physical systems based on highly-connected cells enabled by 5G and 6G networking; and on top of these, we design a shared space properly managed to deliver the needed temporal behaviour required by cyber-physical systems. For this, we present the design of CoTwin framework as a middleware that allows cells to collectively improve digital twin models seamlessly. CoTwin manages the interaction of cells with a blockchain-based collaborative space offering a built-in trusted storage model. We integrate neural network algorithms as they provide fast execution that meet the time-sensitivity requirements of cyber-physical systems. Our contribution is validated by means of its implementation and deployment on an actual blockchain network, and an exhaustive set of experiments to analyse the resulting overhead and temporal behaviour. Results show that CoTwin achieves stable execution times across all its functional pieces; and it exhibits stable service time for large sets of cells., This research was funded by project Design of services for resilient and real-time execution of social dispersed computing applications in cyber physical domains funded by Generalitat Valenciana (Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital), Spain, under grant No. AICO/2021/138; and by project Evolution of the radio access network towards 6G for massive and low-latency services funded by ERDF A way of making Europe and Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/501100011033) of Spain, under grant No. PID2021-123168NB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unsupervised Learning for Lateral-Movement-Based Threat Mitigation in Active Directory Attack Graphs

  • Herranz-Oliveros, David
  • Tejedor-Romero, Marino
  • de la Cruz-Piris, Luis
  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
[EN] Cybersecurity threats, particularly those involving lateral movement within networks, pose significant risks to critical infrastructures such as Microsoft Active Directory. This study addresses the need for effective defense mechanisms that minimize network disruption while preventing attackers from reaching key assets. Modeling Active Directory networks as a graph in which the nodes represent the network components and the edges represent the logical interactions between them, we use centrality metrics to derive the impact of hardening nodes in terms of constraining the progression of attacks. We propose using Unsupervised Learning techniques, specifically density-based clustering algorithms, to identify those nodes given the information provided by their metrics. Our approach includes simulating attack paths using a snowball model, enabling us to analytically evaluate the impact of hardening on delaying Domain Administration compromise. We tested our methodology on both real and synthetic Active Directory graphs, demonstrating that it can significantly slow down the propagation of threats from reaching the Domain Administration across the studied scenarios. Additionally, we explore the potential of these techniques to enable flexible selection of the number of nodes to secure. Our findings suggest that the proposed methods significantly enhance the resilience of Active Directory environments against targeted cyber-attacks., This publication is part of project TED2021-131387B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR and of project PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Finally, this work is a part of the research project SBPLY/23/180225/000160, which is funded by the EU through FEDER, Spain, and by the JCCM through INNOCAM. David Herranz is also funded by both an FPU grant and a Mobility Grant for Research Staff in Training from the University of Alcala.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Channel Selection in Uncoordinated IEEE 802.11 Networks Using Graph Coloring

  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
  • Marsá-Maestre, Iván
  • de la Hoz, Enrique
  • Orden, David
  • Herranz-Oliveros, David
[EN] One of the big challenges in decentralized Wi-Fi networks is how to select channels for the different access points (APs) and their associated stations (STAs) in order to minimize interference and hence maximize throughput. Interestingly enough, de facto standards in terms of uncoordinated channel selection are quite simple, and in many cases result in fairly suboptimal channel allocations. Here, we explore how graph coloring can be used to evaluate and inform decisions on Wi-Fi channel selection in uncoordinated settings. Graph coloring, in its most basic form, is a classic mathematical problem where colors have to be assigned to nodes in a graph while avoiding assigning the same color to adjacent nodes. In this paper, we modeled Wi-Fi uncoordinated channel selection as a graph coloring problem and evaluated the performance of different uncoordinated channel selection techniques in a set of representative scenarios of residential buildings. The results confirm some of the widely accepted consensus regarding uncoordinated channel selection but also provide some new insights. For instance, in some settings, it would be better to delegate the decision on which channel to use to transmit the STAs, rather than having the AP make the decision on its own, which is the usual way., This publication is part of Project TED2021-131387B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR and of Project PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Ivan Marsa-Maestre and David Orden are partially funded by Project SB-PLY/19/180501/000171 of the Junta de Comunidades de Castilla-La Mancha and FEDER and by Project WiDAI (CM/JIN/2021-004) of the Comunidad de Madrid and University of Alcala. Jose Manuel Gimenez-Guzman, Ivan Marsa-Maestre, and David Herranz-Oliveros are also funded by Project PID2019-104855RB-I00/AEI/10.13039/501100011033 of the Spanish Ministry of Science and Innovation. David Orden is also partially supported by Project PID2019-104129GB-I00/AEI/10.13039/501100011033 of the Spanish Ministry of Science and Innovation. The APC was funded by Project TED2021-131387B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Semantic V2X Communications for Image Transmission in 6G Systems

  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
  • Leyva-Mayorga, Israel
  • Popovski, Petar
[EN] The success of future Intelligent Transportation Systems (ITS) heavily relies on the availability of wireless communications technologies that are able to fulfil the strict requirements imposed by applications such as autonomous driving. However, due to the scarce spectrum allocated to ITS, current vehicle-to-everything (V2X) networks experience a severe capacity bottleneck. In this paper, we consider a typical ITS application where images are periodically captured and transmitted by the vehicles. Using an open dataset of real video frames captured by vehicles, we show that the current bandwidth allocated to ITS is insufficient, requiring the vehicles to transmit the video at only a small portion of the frame rate at which it can be captured by the sensors. Furthermore, we show that semantic communications (SemCom) using semantic segmentation are essential to solve this problem, since the receivers are not interested in receiving high definition images but a semantic interpretation that assesses the importance of the elements in it. Our results show that, although the benefits of SemCom in terms of energy consumption are limited to algorithms with a low computational complexity, SemCom are able to greatly improve the performance in terms of maximum supported load and latency, making SemCom essential to make future ITS over 6G viable., This work was supported in part by MICIU/AEI/10.13039/501100011033 under Project TED2021-131387B-I00; in part by the European Union "NextGenerationEU"/PRTR; in part by MICIU/AEI/10.13039/501100011033/FEDER, UE, under Project PID2021-123168NB-I00; in part by the SNS JU Project 6G-GOALS through the EU's Horizon Program under Grant 101139232; and in part by the Villum Investigator Grant "WATER" from the Velux Foundation, Denmark. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Are European initiatives related to local spectrum allocation for private 5G networks ready for use in industrial cases?

  • Bartolín-Arnau, Luis M.
  • Vera-Pérez, Jose
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
[EN] The introduction of the Factory of the Future has revolutionised the manufacturing sector through the integration of various technologies such as Automated Guided Vehicles (AGVs), Artificial Intelligence (AI), the Industrial Internet of Things (IIoT), cloud computing and cyber-physical control systems (CPCS). These advances have created the need to develop novel communication systems to support new industrial requirements. Therefore, the fifth generation of mobile networks (5G) has become one of the most relevant alternatives in this field. However, the current regulations in Europe and the spectrum reserved for private 5G may not be sufficient to meet the requirements of some of the industrial applications for which it was conceived. Therefore, it is necessary to analyse the private 5G network to identify the performance thresholds according to the requirements set by the 3rd Generation Partnership Project (3GPP) for the selected industrial scenarios. This work proposes a comprehensive analysis of the feasibility of private 5G infrastructures to meet the industrial requirements studied for different use cases proposed by 3GPP. For this purpose, laboratory tests have been carried out to analyse the performance of a 5G physical network infrastructure and the results were compared with those obtained after modelling different scenarios using Simu5G, a 5G simulator based on the OMNeT++ framework. The conclusions drawn from this work have shown that, although 5G technology is a key enabler for the industrial sector, there are European private spectrum reservation initiatives that do not have sufficient performance to meet the more restrictive requirements for different uses defined by 3GPP, and therefore need to be adapted to drive the adoption of new spectrum reservations for this type of private infrastructure in industry., This work was supported in part by MCIN/AEI/10.13039/501100011033 under Grant PID2021-123168NB-I00, in part by ERDF A way of making Europe, and in part by the Generalitat Valenciana through the Instituto Valenciano de Competitividad Empresarial IVACE and FEDER under Grant IMDEEA/2023/53.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flexible IoT Agriculture Systems for Irrigation Control Based on Software Services

  • Palomar-Cosín, Eva
  • Garcia-Valls, Marisol|||0000-0003-2383-5310
[EN] IoT technology applied to agriculture has produced a number of contributions in the recent years. Such solutions are, most of the time, fully tailored to a particular functional target and focus extensively on sensor-hardware development and customization. As a result, software-centered solutions for IoT system development are infrequent. This is not suitable, as the software is the bottleneck in modern computer systems, being the main source of performance loss, errors, and even cyber attacks. This paper takes a software-centric perspective to model and design IoT systems in a flexible manner. We contribute a software framework that supports the design of the IoT systems' software based on software services in a client-server model with REST interactions; and it is exemplified on the domain of efficient irrigation in agriculture. We decompose the services' design into the set of constituent functions and operations both at client and server sides. As a result, we provide a simple and novel view on the design of IoT systems in agriculture from a sofware perspective: we contribute simple design structure based on the identification of the front-end software services, their internal software functions and operations, and their interconnections as software services. We have implemented the software framework on an IoT irrigation use case that monitors the conditions of the field and processes the sampled data, detecting alarms when needed. We demonstrate that the temporal overhead of our solution is bounded and suitable for the target domain, reaching a response time of roughly 11 s for bursts of 3000 requests., This research was funded by the following projects: "Design of services for resilient and realtime execution of social dispersed computing applications in cyber-physical domains" funded by Generalitat Valenciana (Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital), Spain, under grant No. AICO/2021/138. The APC was funded by AICO/2021/138 (Subvenciones para grupos de investigacion consolidados). Also, this work has been supported by Grant PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe; and by project Green Networks: Towards environmental-friendly 6G Networks under grant TED2021-131387B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/RTRP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of information update generation on the radio access network of cellular Internet of Things

  • Flores Vázquez, Marcelo E.
  • Tello-Oquendo, Luis
  • Aranda, Juan
  • Guamo Morocho, Andrea K.
  • Pla, Vicent|||0000-0002-0894-9494
  • Capella Hernández, Juan Vicente|||0000-0003-3879-9826
[EN] Cellular Internet of Things (CIoT) is considered a suitable technology to provide connectivity to IoT devices and support machine-type communication (MTC). CIoT relies on cellular networks, such as 5 G, to handle the increased demand for data and avoid overload. However, the limited capacity of the Random Access Channel (RACH) in 5 G Radio Access Networks (RANs) represents a challenge for implementing real-time IoT applications. Information update generation and the Random Access (RA) protocol play a crucial role in ensuring timely updates. This paper presents a performance analysis of the impact of information update generation patterns on the RAN in CIoT when the number of IoT devices and information update frequency increase. An extensive simulation study was conducted, considering MTC and H2H (human-to-human) traffic with varying access request intensities. We determine the maximum information update frequency to provide a highly successful access probability over the RAN., The authors would like to acknowledge all the institutions that supported this work: (i) Grupo de Investigacion en Cloud Computing Smart Cities & High Performance Computing (GIHP4C) and the Universidad Politenica Salesiana (Project: Sistema de telemonitoreo automatico del nivel de cloro presente en el agua potabilizada en plantas de tratamiento pertenecientes a pequenas comunidades rurales ubicadas en el territorio ecuatoriano); (ii) Grant PID2021-123168NB-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union A way of making Europe/ERDF, and Grant TED2021-131387B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/RTRP; and (iii) CAPSAB-Facultad de Ingenieria, Universidad de La Sabana (Project ID: ING-310-2023).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Evaluation Process for IoT Platforms in Time-Sensitive Domains

  • Garcia-Valls, Marisol|||0000-0003-2383-5310
  • Palomar-Cosín, Eva
[EN] Determining the temporal behavior of an IoT platform is of utmost importance as IoT systems are time-sensitive. IoT platforms play a central role in the operation of an IoT system, impacting the overall performance. As a result, initiating an IoT project without the exhaustive knowledge of such a core software piece may lead to a failed project if the finished systems do not meet the needed temporal response and scalability levels. Despite this fact, existing works on IoT software systems focus on the design and implementation of a particular system, providing a final evaluation as the validation. This is a risky approach as an incorrect decision on the core IoT platform may involve great monetary loss if the final evaluation proves that the system does not meet the expected validation criteria. To overcome this, we provide an evaluation process to determine the temporal behavior of IoT platforms to support early design decisions with respect to the appropriateness of the particular platform in its application as an IoT project. The process defines the steps towards the early evaluation of IoT platforms, ranging from the identification of the potential software items and the determination of the validation criteria to running the experiments and obtaining results. The process is exemplified on an exhaustive evaluation of a particular mainstream IoT platform for the case of a medical system for patient monitoring. In this time-sensitive scenario, results report the temporal behavior of the platform regarding the validation parameters expressed at the initial steps., This research was funded by the following projects: "Design of services for resilient and real-time execution of social dispersed computing applications in cyber-physical domains" funded by Generalitat Valenciana (Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital), Spain, under grant No. AICO/2021/138. The APC was funded by AICO/2021/138 (Subvenciones para grupos de investigacion consolidados). Also, this work has been supported by Grant PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe; and by project Green Networks: Towards environmental-friendly 6G Networks under grant TED2021-131387B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/RTRP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

VelogCPS: A safe blockchain network for cyber-physical systems leveraging block verifiers

  • Garcia-Valls, Marisol|||0000-0003-2383-5310
  • Chirivella-Ciruelos, Alejandro M.
[EN] Non-functional requirements related to safety, security, and timeliness have made cyber-physical systems (CPS) initially reluctant to their integration with blockchain technology. Despite the multiple advantages of blockchain like improved data security and traceability, the main reasons that have slowed down its adoption in CPS still remain. Examples of these are the inherent overhead of accessing the distributed ledger and the security incidents that a number of blockchain networks have suffered since its inception. This paper presents VelogCPS, a novel middleware that guarantees that logic and data managed by blockchain networks of cyber- physical systems are verified and generated by legitimate sources. Thus, VelogCPS avoids a kind of security incidents that impact the authenticity and integrity of the logic and data managed in blockchain networks. By authenticity we refer to provenance authenticity of the involved smart contracts, i.e., the perfect matching between the advertised source -code and the version deployed to the network. Our framework provides a safe blockchain network as it ensures that the entities that participate to a CPS use solely authentic logic. We do this by leveraging block verifier services and enforcing them through the operation workflow. As a result, the middleware guarantees that the participating entities use and share authentic logic. The proposed framework is validated through its implementation on a real blockchain network, employing actual smart contract verifier logic, and through the exhaustive analysis of the temporal behaviour and overhead of the major operations; the obtained results ensure its utility for time -sensitive sytems like CPS and IoT., This research was funded by project " Design of services for resilient and real-time execution of social dispersed computing applications in cy-ber-physical domains "funded by Generalitat Valenciana (Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) , Spain, under Grant No. AICO/2021/138; and by project " Evolution of the radio access network towards 6G for massive and low-latency services "funded by ERDF A way of making Europe and Ministerio de Ciencia, Innovación y Universidades of Spain MCIN/AEI/10.13039/501100011033 under Grant no. PID2021-123168NB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal channel assignment on dense Wi-Fi networks using Thermodynamic Threshold Accepting

  • Tejedor-Romero, Marino
  • Cruz-Piris, Luis
  • Herranz-Oliveros, David
  • Marsa-Maestre, Iván
  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
[EN] Channel assignment in Wi-Fi 6 dense networks is a challenging problem which critically impacts the performance of WLAN communications. Although there have been many proposals in the area of IEEE 802.11 channel assignment, LCCS has emerged as the de facto standard for distributed channel selection. Notwithstanding, centralized optimizers overcome the performance of distributed channel assignment algorithms, so their study is of utmost importance. One of the most successful optimization proposals in the state-of-the-art for Wi-Fi 4 is based on simulated annealing (SA). However, SA presents a significant limitation: its parameters must be adjusted manually for each scenario, otherwise yielding suboptimal solutions. In this paper, we propose a new technique for channel assignment optimization of Wi-Fi dense networks, called Thermodynamic Threshold Accepting (TTA), including modifications inspired by Threshold Accepting (TA) and Thermodynamic Simulated Annealing (TSA). With respect to SA, TTA avoids manual tuning, being able to adapt to the specific setting automatically. We evaluate TTA in a dense Wi-Fi model and, compared to SA, we show that our approach reaches optimal results without requiring any prior fine-tuning. We also show that TTA is even able to slightly overcome the performance of an accurately calibrated SA optimizer for the same number of iterations., This publication is part of project TED2021-131387B-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR and of project PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. The work has also been funded by Project SB- PLY/19/180501/000171 of the Junta de Comunidades de Castilla-La Mancha and FEDER, Spain, by Project WiDAI (CM/JIN/2021 004) of the Comunidad de Madrid and University of Alcalá, and by Projects PID2019-104855RB-I00 and PID2019-104129GB-I00/AEI / 10.13039/501100011033 of the Spanish Ministry of Science and Innovation. Finally, this work is part of the research project SBPLY/23/180225/000160, which is funded b
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

IEEE 802.11 graph models

  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
  • Marsa-Maestre, Ivan
  • Cruz-Piris, Luis
  • Orden, David
  • Tejedor-Romero, Marino
[EN] There are several recent research lines addressing Wi-Fi network planning and optimiza-tion, both in terms of channel assignment and access point deployment. The problem with these works is that evaluation is usually performed with specific and closed models regarding signal prop-agation, throughput computation, and utility definition. Also, many of the models in the literature make assumptions about the role of wireless stations, or the co-channel interference, which-while being valid in the context of a single research work-makes very difficult to compare different approaches, to re-use concepts from previous mechanisms to create new ones, or to generalize mechanisms to other scenarios. This makes the different research lines in Wi-Fi network planning and optimization progress in an isolated manner.This paper aims to address such a recurring problem by proposing a graph-based generic model for Wi-Fi utility computation in network planning scenarios, as well as providing a collection of scenario graphs which may be used to benchmark different planning and optimization approaches. Experiments are conducted to show the validity of the model and the significance of its features, along with its extensibility to other scenarios., This work has been partially funded by Projects PID2019-10 4855RB-I00/AEI/10.13039/501100011033 and PID2019-10412 9GB-I00/AEI/10.13039/501100011033, by Project SBPLY/19/180501/000171 of the Junta de Comunidades de Castilla-La Mancha and FEDER, by Projects UCeNet (CM/JIN/2019-031) and WiDAI (CM/JIN/2021-004) of the Comunidad de Madrid and University of Alcala, and by H2020-MSCA-RISE project 734922 - CONNECT. The publication is also part of project TED2021-131387B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR and of project PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/50110001103 3/FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding Inter- and Intra-Cluster Concurrent Transmissions for IoT Uplink Traffic in MIMO-NOMA Networks: A DTMC Analysis

  • Kumar, Abhishek
  • Li, Frank Y.
  • Florea, Carmen
  • Dobre, Octavia A.
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
[EN] To enable concurrent transmissions for Internet of things (IoT) traffic in multi-antenna beyond fifth generation networks, non-orthogonal multiple access (NOMA) mechanisms appear as a promising approach. For NOMA-enabled transmissions, IoT devices are grouped into clusters in order to exploit the benefit of concurrent transmissions. However, how to facilitate transmissions from both intra- and inter-cluster is not an easy task and the performance of such concurrent transmissions is so far not well understood from a mathematical point of view, especially when error-prone channel conditions are considered. In this paper, we propose two random access schemes which enable intra- and inter-cluster concurrent transmissions for uplink IoT traffic with and without access control. To assess the performance of such systems, we develop two analytical models based on discrete-time Markov chains (DTMCs) that mimic the behavior of such transmissions. Our models deal with cluster-level performance considering dynamic packet arrivals and the transmissions from devices belonging to the same or different clusters. Through extensive simulations, we validate the accuracy of the analytical models and evaluate the system- and cluster-level performance in terms of throughput and delay under various traffic load conditions and network configurations., This work was supported by the European Economic Area (EEA) Norway (NO) through the A Massive MIMO Enabled IoT Platform with Networking Slicing for Beyond 5G IoV/V2X and Maritime Services (SOLID-B5G) under Grant 2014-2021, Project 42/2021, and Project RO-NO2019-0499. The work of Jorge Martinez-Bauset was supported in part by the MCIN/AEI, Spain/10.13039/501100011033 under Grant PGC2018-094151BI00, Grant PID2021-123168NB-I00; in part by the European Union A Way of Making Europe/ERDF under Grant TED2021-131387B-I00; and in part by the European Union NextGenerationEU/RTRP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive Beacon Period Configurator for Scalable LoRaWAN Downlink Applications

  • Todoli Ferrandis, David
  • Santonja Climent, Salvador
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] Low-power wide-area networks (LPWAN) are commonly used because they meet the require ments of Internet-of-Things (IoT) networks with a large number of end devices, such as high network scalability, wide area coverage, low data rates, and delay tolerance while consuming very little energy. The LoRa wide-area network (LoRaWAN) is one of the most popular solutions, supporting three types of medium access control (MAC) options to handle distinct application demands. Class B shortens downlink frame transmission latency while maintaining low energy consumption in the end device. This article analyzes the operation of gateways with class B devices to determine the events that influence scalability and performance, presents an analytical model to describe these systems, and proposes an optimization mechanism called Adaptive Beacon Period Configurator (ABPC). ABPC changes the time-related parameters configuration to improve the usability of these networks in dynamic scenarios. The proposed solution is then simulated and tested against the analytical model. The tradeoff between the waiting time between messages, the probability of reception, and the energy consumption of an end device is shown in the results, describing how traffic density increases impacts in these Key Performance Indicators (KPI) and how to try to guarantee these requirements in a network deployment., This work was supported in part by the Horizon Europe Framework Program of the European Commission AI Powered Human-Centred Robot Interactions for Smart Manufacturing (AI-PRISM) under Grant 101058589 and in part by the Ministerio de Ciencia e Innovación [Ministry of Science and Innovation (MCIN)]/Agencia Estatal de Investigación [State Research Agency (AEI)]/10.13039/501100011033 and European Regional Development Fund (ERDF) A way of making Europe under Grant PID2021-123168NB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polling Mechanisms for Industrial IoT Applications in Long-Range Wide-Area Networks

  • Todoli Ferrandis, David
  • Santonja Climent, Salvador
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
[EN] LoRaWAN is a low-power wide-area network (LPWAN) technology that is well suited for industrial IoT (IIoT) applications. One of the challenges of using LoRaWAN for IIoT is the need to collect data from a large number of devices. Polling is a common way to collect data from devices, but it can be inefficient for LoRaWANs, which are designed for low data rates and long battery life. LoRaWAN devices operating in two specific modes can receive messages from a gateway even when they are not sending data themselves. This allows the gateway to send commands to devices at any time, without having to wait for them to check for messages. This paper proposes various polling mechanisms for industrial IoT applications in LoRaWANs and presents specific considerations for designing efficient polling mechanisms in the context of industrial IoT applications leveraging LoRaWAN technology., The research leading to these results was funded by grant nos. PID2021-123168NB-I00 MCIN/AEI/10.13039/501100011033 by ERDF A way of making Europe and by the Horizon Europe Framework Programme of the European Commission under grant agreement no. 101058589 AI Powered human-centred Robot Interactions for Smart Manufacturing (AI-PRISM) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy-Based Cell Association in Nonuniform Renewable Energy-Powered Cellular Networks: Analysis and Optimization of Carbon Efficiency

  • Zhao, Yuxi
  • Humar, Iztok
  • Zhong, Yi
  • Ge, Xiaohu
  • Casares-Giner, Vicente|||0000-0002-6947-8470
  • Pla, Vicent|||0000-0002-0894-9494
  • Guijarro, Luis|||0000-0001-9774-9728
[EN] The increasing global push for carbon reduction highlights the importance of integrating renewable energy into the supply chain of cellular networks. However, due to the stochastic nature of renewable energy generation and the uneven load distribution across base stations, the utilization rate of renewable energy remains low. To address these challenges, this paper investigates the trade-off between carbon emissions and downlink throughput in cellular networks, offering insights into optimizing both network performance and sustainability. The renewable energy state of base station batteries and the number of occupied channels are modeled as a quasi-birth-death process. We construct models for the probability of channel blocking, average successful transmission probability for users, downlink throughput, carbon emissions, and carbon efficiency based on stochastic geometry. Based on these analyses, an energy-based cell association scheme is proposed to optimize the carbon efficiency of cellular networks. The results show that, compared to the closest cell association scheme, the energy-based cell association scheme is capable of reducing the carbon emissions of the network by 13.0% and improving the carbon efficiency by 11.3%., This work was supported in part by the National Key R&D Program of China under Grant 2024YFE0200504, in part by the Ministry of Science and Technology (MOST) of China through project no. 110000206520238034, in part by Grant PID2021-123168NB-I00, MCIN/AEI, Spain/10.13039/50 1100011033 and the European Union A way of making Europe/ERDF, and Grant TED2021-131387B-I00, in part by MCIN/AEI, Spain/10.13039/501100011033 and the European Union NextGenerationEU/RTRP. The work of Iztok Humar was supported by the Slovenian Research and Innovation Agency program P2-0425.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Policy Gradient Algorithms for Age-of-Information Cost Minimization

  • Vidal Catalá, José Ramón|||0000-0002-7137-1349
  • Pla, Vicent|||0000-0002-0894-9494
  • Guijarro, Luis|||0000-0001-9774-9728
  • Leyva-Mayorga, Israel
[EN] Recent developments in cyber-physical systems have increased the importance of maximizing the freshness of the information about the physical environment. However, optimizing the access policies of Internet of Things devices to maximize the data freshness, measured as a function of the Age-of-Information (AoI) metric, is a challenging task. This work introduces two algorithms to optimize the information update process in cyber-physical systems operating under the generate-at-will model, by finding an online policy without knowing the characteristics of the transmission delay or the age cost function. The optimization seeks to minimize the time-average cost, which integrates the AoI at the receiver and the data transmission cost, making the approach suitable for a broad range of scenarios. Both algorithms employ policy gradient methods within the framework of model-free reinforcement learning (RL) and are specifically designed to handle continuous state and action spaces. Each algorithm minimizes the cost using a distinct strategy for deciding when to send an information update. Moreover, we demonstrate that it is feasible to apply the two strategies simultaneously, leading to an additional reduction in cost. The results demonstrate that the proposed algorithms exhibit good convergence properties and achieve a time-average cost within 3% of the optimal value, when the latter is computable. A comparison with other state-of-the-art methods shows that the proposed algorithms outperform them in one or more of the following aspects: being applicable to a broader range of scenarios, achieving a lower time-average cost, and requiring a computational cost at least one order of magnitude lower., This work was supported through Grant PID2021- 123168NB-I00, funded by MCIN/AEI/10.13039/50 1100011033 and the European Union A way of making Europe/ERDF, and Grant TED2021-131387B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/RTRP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Semi-Contention-Free Access in IoT NOMA Networks: A Reinforcement Learning Framework

  • Kumar, Abhishek
  • Li, Frank Y.
  • Vidal Catalá, José Ramón|||0000-0002-7137-1349
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
[EN] The unprecedented surge of massive Internet of things (mIoT) traffic in beyond fifth generation (B5G) communication systems calls for transformative approaches for multiple access and data transmission. While classical model-based tools have been proven to be powerful and precise, an imminent trend for resource management in B5G networks is promoting solutions towards data-driven design. Considering an IoT network with devices spread in clusters covered by a base station, we present in this paper a novel model-free multiple access and data transmission framework empowered by reinforcement learning, designed for power-domain non-orthogonal multiple access networks to facilitate uplink traffic of small data packets. The framework supports two access modes referred to as contention-based and semi-contention-free, with its core component being a policy gradient algorithm executed at the base station. The base station performs access control and optimal radio resource allocation by periodically broadcasting two control parameters to each cluster of devices that considerably reduce data detection failures with a minimum computation requirement on devices. Numerical results, in terms of system and cluster throughput, throughput fairness, access delay, and energy consumption, demonstrate the efficiency and scalability of the framework as network size and traffic load vary., The research leading to these results has received funding from the European Economic Area (EEA) Norway (NO) Grants 2014-2021, under Project contract no. 42/2021, RO-NO-2019-0499 A Massive MIMO Enabled IoT Platform with Networking Slicing for Beyond 5G IoV/V2X and Maritime Services (SOLID-B5G). The work of Jose-Ramon Vidal and Jorge Martinez- ¿ Bauset was also supported by Grant PID2021-123168NB-I00, funded by MCIN/AEI, Spain/10.13039/501100011033 and the European Union A way of making Europe/ERDF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surgical immunization strategies against lateral movement in Active Directory environments

  • Herranz-Oliveros, David
  • Marsa-Maestre, Ivan
  • Tejedor-Romero, Marino
  • de la Hoz, Enrique
  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
[EN] Lateral movement, in which a cyber attacker progresses through an enterprise network in order to compromise its most valuable assets, is a key stage of any intrusion nowadays. Therefore, being able to mitigate lateral movement, be it by slowing down attacker progress or by limiting its reach, is a top priority for enterprise cyber-defence. Due to the inherent complexity of enterprise networks, it is also a paramount challenge. This challenge becomes even more prominent if we take into account the high impact of deploying security countermeasures on the performance or functionality of the network. In this paper we model lateral movement as an infection process and propose a methodology to prioritize which network elements to protect for a more effective and efficient mitigation. To do this we rely on a graph model and graph theoretic metrics taken from epidemiology research, and apply them to the trust relationships in Microsoft Active Directory infrastructures. We propose selective immunization techniques which act as ``surgical¿¿ countermeasures, by impacting a very reduced ratio of the nodes in the network. Experiments show that the selective immunization strategies we propose effectively mitigate infection spread in these settings while keeping the amount of immunized nodes at a minimum., This work has been partially funded by the project PID2019-104855RB-I00/AEI/10.13039/501100011033 from the Ministry of Science and Innovation of Spain, the project SBPLY/19/180501/000171 from the Government of Castilla-La Mancha (Spain), and the projects UCeNet (CM/JIN/2019-031) and WiDAI (CM/JIN/2021-004) from the Community of Madrid and the University of Alcalá. David Herranz is also funded by an FPU grant from the University of Alcalá. This publication is also part of the TED2021-131387B-I00 project funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU /PRTR, and the project PID2021-123168NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy Consumption Modeling for Heterogeneous Internet of Things Wireless Sensor Network Devices: Entire Modes and Operation Cycles Considerations

  • Portillo-Jimenez, Canek
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Pla, Vicent|||0000-0002-0894-9494
  • Casares-Giner, Vicente|||0000-0002-6947-8470
[EN] Wireless sensor networks (WSNs) and sensing devices are considered to be core components of the Internet of Things (IoT). The performance modeling of IoT-WSN is of key importance to better understand, deploy, and manage this technology. As sensor nodes are battery-constrained, a fundamental issue in WSN is energy consumption. Additional issues also arise in heterogeneous scenarios due to the coexistence of sensor nodes with different features. In these scenarios, the modeling process becomes more challenging as an efficient orchestration of the sensor nodes must be achieved to guarantee a successful operation in terms of medium access, synchronization, and energy conservation. We propose a novel methodology to determine the energy consumed by sensor nodes deploying a recently proposed synchronous duty-cycled MAC protocol named Priority Sink Access MAC (PSA-MAC). We model the operation of a WSN with two classes of sensor devices by a pair of two-dimensional Discrete-Time Markov Chains (2D-DTMC), determine their stationary probability distribution, and propose new expressions to compute the energy consumption based solely on the obtained stationary probability distribution. This new approach is more systematic and accurate than previously proposed ones. The new methodology to determine energy consumption takes into account different specific features of the PSA-MAC protocol as: (i) the synchronization among sensor nodes; (ii) the normal and awake operation cycles to ensure synchronization among sensor nodes and energy conservation; (iii) the two periods that compose a full operation cycle: the data and sleep periods; (iv) two transmission schemes, SPT (single packet transmission) and APT (aggregated packet transmission) (v) the support of multiple sensor node classes; and (vi) the support of different priority assignments per class of sensor nodes. The accuracy of the proposed methodology has been validated by an independent discrete-event-based simulation model, showing that very precise results are obtained., This work was supported through Grant PID2021-123168NB-I00, funded by MCIN/AEI, Spain/10.13039/501100011033 and the European Union A way of making Europe/ERDF, and Grant TED2021-131387B-I00, funded by MCIN/AEI, Spain/10.13039/501100011033 and the European Union NextGenerationEU/ RTRP. Canek Portillo was supported in part by Grant 2014-0870/001-001 (EuroinkaNet) and by Grant DSA/103.5/15/6629 (SEP-SES).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Goal-Oriented Source Coding and Filtering for Vehicular Communications

  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
  • Leyva-Mayorga, Israel
  • Popovski, Petar
[EN] Vehicle-to-everything (V2X) networks will constitute a prominent application in future generations of cellular networks, definitely transforming our conception of transportation systems. A major challenge in V2X networks is the vast amount of data generated by the large number of sensors in the vehicles, which saturates the wireless links. As it is not possible to meet the throughput, timing, and reliability requirements for the total bulk of generated data, one needs to filter out data based on the actual communication goal. In this article, we present an architecture and diverse options to implement filtering and source coding for goal-oriented (GO) vehicular communications. We illustrate how filtering and source coding contribute to meeting the strict delay requirements while maintaining energy-efficient operation. Our results show that GO communications, performed as the combination of Bloom filtering and GO source coding, can greatly contribute not only to reduce the energy consumption by up to 30% but also to decrease delay, which in turn increases the supported amount of delay-sensitive traffic by up to 819.2%., This work was supported in part by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR under Project TED2021-131387B-I00; in part by the MCIN/AEI/10.13039/501100011033/FEDER, UE under Project PID2021123168NB-I00; in part by the Spanish Ministry of Science and Innovation under Project PID2019-104855RB-I00/AEI/10.13039/501100011033; in part by the SNS JU Project 6G-GOALS through the EU's Horizon Program under Grant 101139232; and in part by the Villum Investigator Grant "WATER" from the Velux Foundation, Denmark. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A user subscription model in mobile radio access networks with network slicing

  • Vidal Catalá, José Ramón|||0000-0002-7137-1349
  • Guijarro, Luis|||0000-0001-9774-9728
  • Pla, Vicent|||0000-0002-0894-9494
[EN] Network slicing is an architectural enabling technology that logically decouples the current cellular networks into infrastructure providers (InPs) and Network Slice Tenants (NSTs). The network resources (e.g., radio access resources at each cell) are owned by the InP, and are shared by the NSTs to provide a service to their mobile users. In this context, we proposed a business model that includes resource allocation and user subscription to NSTs in a competitive setting, and provides, among other things, closed-form expressions for the subscription indicators in equilibrium of each NST at each cell. This model relies on the widely adopted logit model to characterize user subscriptions. However, as a consequence of user mobility and radio propagation, some of the underlying assumptions in the logit model do not hold. Therefore, further research is needed to assess the accuracy of the results provided by the logit model in a mobile radio scenario. We carry out a thorough evaluation of the validity of the model by comparing its results against those obtained through computer simulation. Our simulation model includes complete and realistic characterizations of user mobility and radio propagation. From the results, we conclude that in most cases the logit model provides valid results in a mobile radio scenario., This work was supported through Grants PGC2018-094151B-I00 and PID2021-123168NB-I00, funded by MCIN/AEI, Spain/10.13039/501100011033 and the European Union A way of making Europe/ERDF, and Grant TED2021-131387B-I00, funded by MCIN/AEI, Spain/10.13039/501100011033 and the European Union NextGenerationEU/RTRP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the Potential of Wi-Fi in Industrial Environments: A Comparative Performance Analysis of IEEE 802.11 Standards

  • Bartolín-Arnau, Luis M.
  • Orozco-Santos, Federico
  • Sempere Paya, Víctor Miguel|||0000-0001-9271-2010
  • Silvestre-Blanes, Javier|||0000-0001-7091-0040
  • Albero-Albero, Teresa|||0000-0002-5162-6092
[EN] The advent of Industry 4.0 brought about digitalisation and the integration of advanced technologies into industrial processes, with wireless networks emerging as a key enabler in the interconnection of smart devices, cyber-physical systems, and data analytics platforms. With the development of Industry 5.0 and its emphasis on human-machine collaboration, Wi-Fi has positioned itself as a viable alternative for industrial wireless connectivity, supporting seamless communication between robots, automation systems, and human operators. However, its adoption in critical applications remains limited due to persistent concerns over latency, reliability, and interference in shared-spectrum environments. This study evaluates the practical performance of Wi-Fi standards from 802.11n (Wi-Fi 4) to 802.11be (Wi-Fi 7) across three representative environments: residential, laboratory, and industrial. Six configurations were tested under consistent conditions, covering various frequency bands, channel widths, and traffic types. Results prove that Wi-Fi 6/6E delivers the best overall performance, particularly in low-interference 6 GHz scenarios. Wi-Fi 5 performs well in medium-range settings but is more sensitive to congestion, while Wi-Fi 4 consistently underperforms. Early Wi-Fi 7 hardware does not yet surpass Wi-Fi 6/6E consistently, reflecting its ongoing development. Despite these variations, the progression observed across generations clearly demonstrates incremental gains in throughput stability and latency control. While these improvements already provide tangible benefits for many industrial communication scenarios, the most significant leap in industrial applicability is expected to come from the effective implementation of high-efficiency mechanisms. These include OFDMA, TWT, scheduled uplink access, and enhanced QoS features. These capabilities, already embedded in the Wi-Fi 6 and 7 standards, represent the necessary foundation to move beyond conventional best-effort connectivity and toward supporting critical, latency-sensitive industrial applications., The research leading to these results has been funded by the Horizon Europe Framework Programme of the European Commission under Grant Agreement No. 101058589 "AI Powered human-centred Robot Interactions for Smart Manufacturing (AI-PRISM), and by Evolution of the radio access network towards 6G for massive and low-latency services" funded by ERDF A way of making Europe and Ministerio de Ciencia, Innovacion y Universidades of Spain MCINAEI10.13039/501100011033 under Grant no. PID2021-123168NB-I00, and includes participations as part of the non-economic activity plan funded for the 2025 annuity by IVACE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Economic Alternatives for the Provision of URLLC and eMBB Services Over a 5G Network

  • Moreno-Cardenas, Edison
  • Sacoto-Cabrera, Erwin J.
  • Guijarro, Luis|||0000-0001-9774-9728
[EN] This research work analyzes economic alternatives for the provision of ultra-reliable low latency communication (URLLC) and enhanced mobile broadband (eMBB) services by mobile network operators over the same fifth-generation (5G) network. Two business models are proposed to provide the two services to end users. Concretely, a monopoly is a single operator who offers both services, and a duopoly is two different operators that share network resources and offer one service each. In addition, two types of network scenarios for resource sharing are studied. Specifically, a shared network (SN) is a type of network scenario allowing resources to be shared between the two services without priority. A differentiated network (DN) is a type of network scenario that allows resources to be shared between the two services with a priority to URLLC service using network slicing (NS). Regarding the economic aspects, the incentive is modeled through the user's utility and the operator's benefit. At the same time, game theory is used to model the strategic interaction between users and operators, and queuing theory is used to model the interaction between the two services. We conclude that the monopoly social welfare (SW) is closer to the SW of the social optimum than the duopoly SW. In addition, the DN scenario to offer the services through NS is more suitable than the SN scenario since the point of view of service prices, user utilities, and operator benefit., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported through Grants PGC2018-094151B-I00 and PID2021-123168NB-I00, funded by MCIN/AEI, Spain/10.13039/501100011033 and the European Union A way of making Europe/ERDF, and Grant TED2021-131387B-I00, funded by MCIN/AEI, Spain /10.13039/501100011033 and the European Union NextGenerationEU/RTRP and partially fnanced by the Government of Peru through the Bicentennial Generation Scholarship granted to the frst author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Market and Sharing Alternatives for the Provision of Massive Machine-Type and Ultra-Reliable Low-Latency Communications Services over a 5G Network

  • Moreno-Cardenas, Edison
  • Guijarro, Luis|||0000-0001-9774-9728
[EN] The objective of this paper is to analyze economic alternatives for the provision of ultra-reliable low-latency communication (URLLC) and massive machine-type communication (mMTC) services over a fifth-generation (5G) network. Two business models, a monopoly and a duopoly, are studied and two 5G network scenarios are analyzed: a 5G network where the network resources are shared between the two services without service priority, and a 5G network with network slicing that allows for URLLC traffic to have a higher priority. Microeconomics is used to model the behavior of users and operators, and game theory is used to model the strategic interaction between users and operators. The results show that a monopoly over a 5G network with network slicing is the most efficient way to provide both URLLC and mMTC services., This work received support from various sources, including Grant PID2021-123168NB-I00 funded by MCIN/AEI, Spain/10.13039/501100011033; the European Union s A way of making Europe/ERDF, Grant TED2021-131387B-I00 funded by MCIN/AEI, Spain/10.13039/501100011033; the European Union s NextGenerationEU/RTRP; and Grant AICO/2021/138 funded by the Generalitat Valenciana, Spain. This work was also partially financed by the Government of Peru through the Bicentennial Generation Scholarship granted to the first author
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy-Autonomous Roadside Nodes in V2I Using RF Energy Harvesting

  • Gimenez-Guzman, Jose Manuel|||0000-0002-1645-8476
  • Leyva-Mayorga, Israel
  • Azarbahram, Amirhossein
  • López, Onel Alcaraz
  • Popovski, Petar
[EN] Future intelligent transportation systems will require complex networking infrastructures with communication among a huge number of vehicles and roadside nodes to support services such as autonomous driving. However, the deployment and operation of such a large number of roadside nodes is expensive due to either the cost of battery replacement or the maintenance of a continuous energy supply in long highways or rural areas. In this work, we evaluate the feasibility of a roadside unit harvesting energy from radio frequency (RF) signals transmitted by a nearby moving vehicle, with the incentive of using a part of the harvested energy to transmit small amounts of data to the vehicle. We consider a realistic model with the timing elements related to the movement of the vehicle, beam tracking errors, a non-linear model for energy harvesting, and potential line-of-sight obstructions in multi-vehicle scenarios. Results show that, with typical off-the-shelf components, it is feasible to use the RF harvested energy to transmit between a few hundred and several thousand bytes, depending on the speed of vehicles and the frequency of operation for energy harvesting, among other parameters., This work was supported in part by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR underProject TED2021-131387B-I00; in part by the MCIN/AEI/10.13039/501100011033/FEDER, UE under Project PID2021-123168NB-I00; in part by the Villum Investigator Grant "WATER" from the Velux Foundation, Denmark; in part by the Finnish Foundation for Technology Promotion; and in part by the Research Council of Finland (former Academy of Finland) under Grant 348515 and Grant 346208 (6G Flagship Programme).
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Unsupervised Learning for Lateral-Movement-Based Threat Mitigation in Active Directory Attack Graphs

  • Herranz Oliveros, David|||0009-0009-0926-3986
  • Tejedor Romero, Marino|||0000-0002-1679-0161
  • Giménez Guzmán, José Manuel|||0000-0002-1645-8476
  • Cruz Piris, Luis de la|||0000-0002-9570-2851
Cybersecurity threats, particularly those involving lateral movement within networks, pose significant risks to critical infrastructures such as Microsoft Active Directory. This study addresses the need for effective defense mechanisms that minimize network disruption while preventing attackers from reaching key assets. Modeling Active Directory networks as a graph in which the nodes represent the network components and the edges represent the logical interactions between them, we use centrality metrics to derive the impact of hardening nodes in terms of constraining the progression of attacks. We propose using Unsupervised Learning techniques, specifically density-based clustering algorithms, to identify those nodes given the information provided by their metrics. Our approach includes simulating attack paths using a snowball model, enabling us to analytically evaluate the impact of hardening on delaying Domain Administration compromise. We tested our methodology on both real and synthetic Active Directory graphs, demonstrating that it can significantly slow down the propagation of threats from reaching the Domain Administration across the studied scenarios. Additionally, we explore the potential of these techniques to enable flexible selection of the number of nodes to secure. Our findings suggest that the proposed methods significantly enhance the resilience of Active Directory environments against targeted cyber-attacks., Ministerio de Ciencia, Innovación y Universidades, Junta de Comunidades de Castilla-La Mancha, Comunidad de Madrid, Fondo Europeo de Desarrollo Regional, European Union
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

An Environmentally Adaptive CRO-SL Algorithm Based on Dynamic Agents for the Channel Assignment Problem in Wireless Networks

  • Romero Barrera, Antonio José|||0000-0001-5496-1331
  • Cruz Piris, Luis de la|||0000-0002-9570-2851
  • Tejedor Romero, Marino|||0000-0002-1679-0161
  • Giménez Guzmán, José Manuel|||0000-0002-1645-8476
  • Marsá Maestre, Iván|||0000-0002-5529-2851
In recent decades, metaheuristic algorithms have emerged as indispensable tools for addressing complex optimization challenges, particularly in several engineering fields, where NP-hard problems are prevalent. A common NP-hard problem in communication engineering is the Channel Assignment Problem (CAP) for wireless access points (APs), with a determined number of stations (STAs) connected to them. The performance of the complete network depends on the interference and noise among the different clusters of devices and the obstacles or elements placed in the physical transmission space. To address the CAP, a new environmentally adaptive approach is proposed for the Coral Reefs Optimization with Substrate Layers (CRO-SL) algorithm, introducing new environmental agents: algae (representing tabu positions) and ocean water acidification (lowering fitness thresholds). The Environmentally Adaptive CRO-SL (EnvAdapt-CRO-SL) implementation aims to improve solution exploration, enhancing computational efficacy in generating new candidate solutions within the coral reef population. An exhaustive comparative analysis of four configurations of the proposed EnvAdapt-CRO-SL variant assesses the impact of each environmental agent on the algorithm's performance. Additionally, external benchmarks against four different metaheuristics, along with an analysis of the influence of pseudorandom number generators on initialization and search operators, and a robust optimization case study, provide deeper insights. The results show that incorporating the new environmental agents into the EnvAdapt-CRO-SL workflow significantly boosts throughput while reducing the computational time required to obtain optimal solutions., Ministerio de Ciencia, Innovación y Universidades, Fondo Europeo de Desarrollo Regional, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Optimal channel assignment on dense Wi-Fi networks using Thermodynamic Threshold Accepting

  • Tejedor Romero, Marino|||0000-0002-1679-0161
  • Giménez Guzmán, José Manuel|||0000-0002-1645-8476
  • Cruz Piris, Luis de la|||0000-0002-9570-2851
  • Herranz Oliveros, David|||0009-0009-0926-3986
  • Marsá Maestre, Iván|||0000-0002-5529-2851
Channel assignment in Wi-Fi 6 dense networks is a challenging problem which critically impacts the performance of WLAN communications. Although there have been many proposals in the area of IEEE 802.11 channel assignment, LCCS has emerged as the de facto standard for distributed channel selection. Notwithstanding, centralized optimizers overcome the performance of distributed channel assignment algorithms, so their study is of utmost importance. One of the most successful optimization proposals in the state-of-the-art for Wi-Fi 4 is based on simulated annealing (SA). However, SA presents a significant limitation: its parameters must be adjusted manually for each scenario, otherwise yielding suboptimal solutions. In this paper, we propose a new technique for channel assignment optimization of Wi-Fi dense networks, called Thermodynamic Threshold Accepting (TTA), including modifications inspired by Threshold Accepting (TA) and Thermodynamic Simulated Annealing (TSA). With respect to SA, TTA avoids manual tuning, being able to adapt to the specific setting automatically. We evaluate TTA in a dense Wi-Fi model and, compared to SA, we show that our approach reaches optimal results without requiring any prior fine-tuning. We also show that TTA is even able to slightly overcome the performance of an accurately calibrated SA optimizer for the same number of iterations., Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Surgical immunization strategies against lateral movement in Active Directory environments

  • Herranz Oliveros, David|||0009-0009-0926-3986
  • Marsá Maestre, Iván|||0000-0002-5529-2851
  • Giménez Guzmán, José Manuel|||0000-0002-1645-8476
  • Tejedor Romero, Marino|||0000-0002-1679-0161
  • Hoz de la Hoz, Enrique de la|||0000-0003-4837-3837
Lateral movement, in which a cyber attacker progresses through an enterprise network in order to compromise its most valuable assets, is a key stage of any intrusion nowadays. Therefore, being able to mitigate lateral movement, be it by slowing down attacker progress or by limiting its reach, is a top priority for enterprise cyber-defence. Due to the inherent complexity of enterprise networks, it is also a paramount challenge. This challenge becomes even more prominent if we take into account the high impact of deploying security countermeasures on the performance or functionality of the network. In this paper we model lateral movement as an infection process and propose a methodology to prioritize which network elements to protect for a more effective and efficient mitigation. To do this we rely on a graph model and graph theoretic metrics taken from epidemiology research, and apply them to the trust relationships in Microsoft Active Directory infrastructures. We propose selective immunization techniques which act as ?surgical? countermeasures, by impacting a very reduced ratio of the nodes in the network. Experiments show that the selective immunization strategies we propose effectively mitigate infection spread in these settings while keeping the amount of immunized nodes at a minimum., Ministerio de Ciencia e Innovación, Junta de Comunidades de Castilla-La Mancha, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

IEEE 802.11 graph models

  • Giménez Guzmán, José Manuel|||0000-0002-1645-8476
  • Marsá Maestre, Iván|||0000-0002-5529-2851
  • Cruz Piris, Luis De La|||0000-0002-9570-2851
  • Orden Martín, David|||0000-0001-5403-8467
  • Tejedor Romero, Marino|||0000-0002-1679-0161
There are several recent research lines addressing Wi-Fi network planning and optimization, both in terms of channel assignment and access point deployment. The problem with these works is that evaluation is usually performed with specific and closed models regarding signal propagation, throughput computation, and utility definition. Also, many of the models in the literature make assumptions about the role of wireless stations, or the co-channel interference, which -while being valid in the context of a single research work- makes very difficult to compare different approaches, to re-use concepts from previous mechanisms to create new ones, or to generalize mechanisms to other scenarios. This makes the different research lines in Wi-Fi network planning and optimization progress in an isolated manner. This paper aims to address such a recurring problem by proposing a graph-based generic model for Wi-Fi utility computation in network planning scenarios, as well as providing a collection of scenario graphs which may be used to benchmark different planning and optimization approaches. Experiments are conducted to show the validity of the model and the significance of its features, along with its extensibility to other scenarios., Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha, Universidad de Alcalá, European Commission