Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

riUAL. Repositorio Institucional de la Universidad de Almería
Publicación Artículo científico (JournalArticle)

A multi-objective approach to identify parameters of compartmental epidemiological models—Application to Ebola Virus Disease epidemics

  • Ruiz Ferrández, Miriam
  • Ivorra, Benjamín
  • López Redondo, Juana
  • Ramos del Olmo, Ángel Manuel
  • Martínez Ortigosa, Pilar
In this work, we propose a novel methodology to identify parameters of compartmental epidemiological models. It is based on solving a multi-objective optimization problem that consists in fitting some of the model outputs to real observations. First, according to the available data of the considered epidemic, we define a multi-objective optimization problem where the model parameters are the optimization variables. Then, this problem is solved by considering a particular optimization algorithm called ParWASF-GA (Parallel Weighting Achievement Scalarizing Function Genetic Algorithm). Finally, the decision maker chooses, within the set of possible solutions, the values of parameters that better suit his/her preferences. In order to illustrate the benefit of using our approach, it is applied to estimate the parameters of a deterministic epidemiological model, called Be-CoDiS (Between-Countries Disease Spread), used to forecast the possible spread of human diseases within and between countries. We consider data from different Ebola outbreaks from 2014 up to 2019. In all cases, the proposed methodology helps to obtain reasonable predictions of the epidemic magnitudes with the considered model.
riUAL. Repositorio Institucional de la Universidad de Almería
Publicación Artículo científico (JournalArticle)

Improving drug discovery through parallelism

  • Sánchez García, Jeronimo
  • Puertas Martín, Savíns
  • López Redondo, Juana
  • Moreno Riado, Juan José
  • Martínez Ortigosa, Pilar
Compound identification in ligand-based virtual screening is limited by two key issues: the quality and the time needed to obtain predictions. In this sense, we designed OptiPharm, an algorithm that obtained excellent results in improving the sequential methods in the literature. In this work, we go a step further and propose its parallelization. Specifically, we propose a two-layer parallelization. Firstly, an automation of the molecule distribution process between the available nodes in a cluster, and secondly, a parallelization of the internal methods (initialization, reproduction, selection and optimization). This new software, called pOptiPharm, aims to improve the quality of predictions and reduce experimentation time. As the results show, the performance of the proposed methods is good. It can find better solutions than the sequential OptiPharm, all while reducing its computation time almost proportionally to the number of processing units considered.
riUAL. Repositorio Institucional de la Universidad de Almería
Publicación Artículo científico (JournalArticle)

Black-box and surrogate optimization for tuning spiking neural models of striatum plasticity

  • Calvo Cruz, Nicolás
  • González Redondo, A.
  • Garrido, J.A.
  • Martínez Ortigosa, Eva
  • Martínez Ortigosa, Pilar
  • López Redondo, Juana
The basal ganglia (BG) is a brain structure that has long been proposed to play an essential role in action selection, and theoretical models of spiking neurons have tried to explain how the BG solves this problem. A recently proposed functional and biologically inspired network model of the striatum (an important nucleus of the BG) is based on spike-timing-dependent eligibility (STDE) and captured important experimental features of this nucleus. The model can recognize complex input patterns and consistently choose rewarded actions to respond to such sensory inputs. However, model tuning is challenging due to two main reasons. The first is the expert knowledge required, resulting in tedious and potentially biased trial-and-error procedures. The second is the computational cost of assessing model configurations (approximately 1.78 h per evaluation). This study addresses the model tuning problem through numerical optimization. Considering the cost of assessing solutions, the selected methods stand out due to their low requirements for solution evaluations and compatibility with high-performance computing. They are the SurrogateOpt solver of Matlab and the RBFOpt library, both based on radial basis function approximations, and DIRECT-GL, an enhanced version of the widespread black-box optimizer DIRECT. Besides, a parallel random search serves as a baseline reference of the outcome of opting for sophisticated methods. SurrogateOpt turns out to be the best option for tuning this kind of model. It outperforms, on average, the quality of the configuration found by an expert and works significantly faster and autonomously. RBFOpt and the random search share the second position, but their average results are below the option found by hand. Finally, DIRECT-GL follows this line becoming the worst-performing method.
riUAL. Repositorio Institucional de la Universidad de Almería
Publicación Artículo científico (JournalArticle)

An Effective Solution for Drug Discovery Based on the Tangram Meta-Heuristic and Compound Filtering

  • Calvo Cruz, Nicolás
  • Puertas Martín, Savíns
  • López Redondo, Juana
  • Martínez Ortigosa, Pilar
Ligand-Based Virtual Screening accelerates and cheapens the design of new drugs. However, it needs efficient optimizers because of the size of compound databases. This work proposes a new method called Tangram CW. The proposal also encloses a knowledge-based filter of compounds. Tangram CW achieves comparable results to the state-of-the-art tools OptiPharm and 2L-GO-Pharm using about a tenth of their computational budget without filtering. Activating it discards more than two thirds of the database while keeping the desired compounds. Thus, it is possible to consider molecular flexibility despite increasing the options. The implemented software package is public.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical flow driven interpolation for isotropic FIB-SEM reconstructions

  • González-Ruiz, Vicente
  • García-Ortiz, Juan Pablo
  • Fernández-Fernández, María Rosario
  • Fernández, José Jesús
[Background and Objective]: Focused Ion Beam - Scanning Electron Microscopy (FIB-SEM) allows three-dimensional ultrastructural analysis of cells and tissues at the nanoscale. The technique iteratively removes a section of the sample with a FIB and takes an SEM image from the exposed surface. The section thickness is usually higher than the image pixel size to reduce acquisition time, thus resulting in anisotropic resolution. In this work, we explore novel interpolation methods along the sectioning direction to produce isotropic resolution and facilitate proper interpretation of the FIB-SEM 3D volumes., [Methods]: Classical interpolation methods are usually applied in this context under the assumption that the changes through successive images are relatively smooth. However, the actual 3D arrangement of the structures in the sample may cause significant changes in the biological features between consecutive images of the FIB-SEM stacks. We have developed a novel interpolation strategy that accounts for this variation by using the Optical Flow (OF) to estimate it. As an intermediate stage, OF-compensated images are produced by aligning the spatial regions of the biological structures. Interpolated images are then generated from these OF-compensated images. The final isotropic stack is assembled by interleaving the interpolated images with the original images of the anisotropic stack., [Results]: OF-driven and classical interpolation methods were compared using an objective assessment based on Pearson Correlation Coefficient (PCC) and a qualitative evaluation based on visual results, using public datasets and representative anisotropy conditions. The objective assessment demonstrated that the OF-driven interpolation always yields higher PCC values, with interpolated images closer to the ground truth. The qualitative evaluation corroborated those results and confirmed that classical interpolation may blur areas with substantial changes between consecutive images whereas OF-driven interpolation provides sharpness., [Conclusions]: We have developed an OF-driven interpolation approach to generating FIB-SEM stacks with isotropic resolution from experimental anisotropic data. It adapts to the rapid variation of the biological structures observed through the images of the FIB-SEM stack. Our approach outperforms classical interpolation and manages to produce sharp interpolated views in cases where there are significant changes between consecutive experimental images., This work has been partially supported by the Spanish Ministry of Science and Innovation/AEI (grants SAF2017-84565-R, RTI2018-095993-B-I00, PID2021-123278OB-I00, PID2021-123424OB-I00, TED2021-132020B-I00), by the Spanish National Research Council (CSIC, grant 2020AEP029), by the European initiative Corbel (project id 2301), by the Junta de Andalucía (grants UAL18-TIC-A020020-B and P18-RT-1193) and by FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

HPC enables efficient 3D membrane segmentation in electron tomography

  • Moreno, J. J.
  • Garzón, E. M.
  • Fernández, José Jesús
  • Martínez-Sánchez, Antonio
Electron Tomography (ET) is a powerful three-dimensional (3D) imaging technique used in structural biology and biomedicine to allow the visualization of the interior of cells at close-to-molecular resolution. Interpretation of the 3D volumes in ET is usually challenging due to the complexity of the cellular environment, noise conditions and other factors. Automated segmentation methods focused on membranes of the cells and organelles greatly facilitate visualization and interpretation of the 3D volumes. However, they are typically computationally expensive and spend significant processing time on standard computers. In this work, we introduce efficient implementations of one of the methods most commonly used in the ET field for membrane segmentation. They were developed by using High Performance Computing (HPC) techniques to make the most of modern CPU-based and GPU-based computing platforms. A thorough evaluation of the performance on state-of-the-art machines was carried out. The HPC implementations succeed in achieving remarkable speedups, which are around 100× on GPUs, and making it possible to process large 3D volumes in the order of seconds or a few minutes., This work has been supported by the projects and contracts: RTI2018-095993-B-I00, SAF2017-84565-R, PID2021-123278OB, PID2021-123424OB, TED2021-132020B (funded by MCIN/AEI/10.13039/501100011033/FEDER “A way to make Europe”); UAL18-TIC-A020020-B and P18-RT-1193 (both funded by Junta de Andalucía and FEDER); PAPI-21-GR-2011-0048 (funded by the University of Oviedo) and FUO-200-21 (funded by Thermo Fisher Scientific); and a FPU fellowship (FPU16/05946 funded by MCIN/AEI/10.13039/501100011033/ “El FSE invierte en tu futuro”) awarded to J.J. Moreno., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FlowDenoising: Structure-preserving denoising in 3D electron microscopy (3DEM)

  • González-Ruiz, Vicente
  • Fernández, José Jesús
FlowDenoising is a software tool that implements an adaptive Gaussian denoising filter that preserves visually appreciable structures in volumes of 3D electron microscopy (3DEM). It proceeds by nonrigidly aligning the 2D slices in each dimension, using an optical flow estimator, prior to applying a standard separable (1D) Gaussian filter. FlowDenoising has been developed in Python leveraging well-known public domain libraries, such as OpenCV and NumPy. Furthermore, the software tool exploits data-level parallelism to significantly reduce processing times. Its abilities to denoise huge volumes in just minutes on standard multicore computers makes it a useful tool in 3DEM to explore the interior of cells and tissues at the nanoscale., Work supported by MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR ” through grants PID2021-123278OB-I00 and TED2021-132020B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure-preserving Gaussian denoising of FIB-SEM volumes

  • González-Ruiz, Vicente
  • Fernández-Fernández, María Rosario
  • Fernández, José Jesús
FIB-SEM (Focused Ion Beam-Scanning Electron Microscopy) is an imaging technique that allows 3D ultrastructural analysis of cells and tissues at the nanoscale. The acquired FIB-SEM data are highly noisy, which makes denoising an essential step prior to volume interpretation. Gaussian filtering is a standard method in the field because it is fast and straightforward. However, it tends to blur the biological features due to its linear nature that ignores the rapid changes of the structures throughout the volume. To address this issue, we have developed a new approach to structure-preserving noise reduction for FIB-SEM. It has abilities to locally adapt the filtering to the biological structures while taking advantage of the simplicity of Gaussian filtering. It uses the Optical Flow (OF) to estimate the variations of the structural features across the volume, so that they are compensated before the subsequent filtering with a Gaussian function. As demonstrated qualitatively and objectively with datasets from different samples and acquired under different conditions, our denoising approach outperforms the standard Gaussian filtering and is competitive with state-of-the-art methods in terms of noise reduction and preservation of the sharpness of the structures., This work has been partially supported by the Spanish Ministry of Science and Innovation/AEI (grants SAF2017-84565-R, RTI2018-095993-B-I00, PID2021-123278OB-I00, TED2021-132020B-I00), by the Spanish National Research Council (CSIC, grant 2020AEP029), by the Junta de Andalucía, Spain (grants UAL18-TIC-A020020-B and P18-RT-1193) and by FEDER, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acceleration of 3D feature-enhancing noise filtering in hybrid CPU/GPU systems

  • González-Ruiz, Vicente
  • Moreno, J. J.
  • Fernández, José Jesús
FlowDenoising is a new approach to noise reduction in biological volumes obtained with three-dimensional electron microscopy (3DEM). Its abilities to enhance the structural features stem from the fact that an anisotropic Gaussian filtering is steered according to the local structures. To this end, the Optical Flow (OF) among consecutive slices is estimated, which is the most computationally expensive step in this approach. In this article, a hybrid CPU/GPU implementation of FlowDenoising is introduced and evaluated. It exploits parallel computing by distributing the workload among multiple cores and takes advantage of the massive processing in GPUs to accelerate the OF estimation. The hybrid implementation provides remarkable speed-up factors and an important reduction of the processing time, which is particularly relevant for the denoising of huge volumes typically found in 3DEM., This work was supported by Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR” through grants PID2021-123278OB-I00, TED2021-132020B-I00, PID2022-139071NB-I00 and PDC2022-133370-I00., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Domination in cylindrical graphs

O2, repositorio institucional de la UOC
Publicación Contribución de congreso (ConferenceOutput)

Development of a shellcode generator for cybersecurity education and training

  • Orts Gómez, Francisco José
  • Ortega, Gloria
  • Serra-Ruiz, Jordi
As the importance of cybersecurity education continues to grow in our increasingly digital world, mastering its intricacies can often prove daunting, especially for beginners. The so-called shellcodes, malicious codes that are inserted into the memory of other programs and take control of them, are one of the least known dangers for the educational community, partly because understanding them requires mastering, among other subjects, how computer memory works, as well as possessing assembly-level programming skills. This work presents an innovative software application designed specifically to simplify the process of shellcode generation, a fundamental task in the field of computer security. Our tool stands out for its educational approach, providing access to students of all levels, even those with no prior experience in assembly language. Compatible with a wide range of architectures, this application removes the barrier of having to write assembly or machine code, offering instead an intuitive and user-friendly interface. One of the key features of our application is its use of Linux system calls as the basis for code generation. This choice not only ensures greater portability across different platforms and architectures but also allows students to understand the fundamentals of operating systems and their role in executing low-level programs. In addition to providing a practical solution for shellcode generation, our work aims to enhance technical understanding of computer security more broadly. By simplifying the shellcode generation process, we hope to encourage active participation from students, especially those who may feel intimidated by the complexity of low-level programming. By making shellcode generation more accessible, we believe our application can open new doors in the learning of computer security and foster greater engagement in this constantly evolving field.