Pasar al contenido principal

PHOTONIC INTEGRATED CIRCUITS FOR GAS SENSING, RANGING, AND QUANTUM RANDOM NUMBER GENERATION- SP2

PID2021-123459OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CANTABRIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measurement of the temperature dependence of polarization switching in gain-switched VCSELs for quantum random number generation

  • Rivero, Iván
  • Lázaro del Pozo, Alfonso
  • Valle-Miñón, Marcos
  • Quirce, Ana
  • Valle, Ángel
This article belongs to the Special Issue Advancements in Semiconductor Lasers., We report an experimental study of the effect of the temperature of the VCSEL on the probability of excitation of a linearly polarized mode when gain-switching the device. We consider different modulation frequencies and amplitudes. We show that the probability of excitation of a linearly polarized mode significantly changes with the value of the temperature of the device. We also show that for low values of the temperature the probability of excitation saturates to a constant value as the amplitude of the modulation increases. This extends our previous results obtained at larger temperatures for which that saturation was not observed. We identify situations in which the distributions of the linearly polarized signals at a sampling time are approximately uniform. For these cases we evaluate the quality of the random numbers by using statistical test., This research was funded by Ministerio de Ciencia e Innovación, Spain, under grant PID2021-123459OB-C22 MICN/AEI/10.13039/501100011033/FEDER, UE. A. Quirce acknowledges financial support from Beatriz Galindo program, Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Divergence of the Variance of the Optical phase in gain-switched semiconductor lasers described by stochastic rate equations

  • Valle, Ángel
We report a theoretical study of the phase diffusion in a gain-switched single-mode semiconductor laser. We use stochastic rate equations for the electric field to analyze the phase statistics of the gain-switched laser. Their use avoids the instabilities obtained with rate equations for the photon number and optical phase when the photon number is small. However, we show that a new problem appears when the field equations are integrated: the variance of the optical phase becomes divergent. This divergence cannot be observed with the numerical integration of the commonly used equations for the photon number and optical phase because of the previous instabilities. The divergence of the phase variance means that this quantity does not reach a fixed value as the integration time step is decreased. We find that the phase variance increases as the integration time step decreases, with no sign of saturation behavior even for tiny steps. We explain the divergence by making the analogy of our problem with two-dimensional Brownian motion. The fact that the divergence appears is not surprising because in 1940 Paul Lèvy demonstrated that the variance of the polar angle in two-dimensional Brownian motion is a divergent quantity. Our results show that stochastic rate equations for the photon number and phase are not appropriate for describing the phase statistics when the photon number is small. Simulation of the stochastic rate equations for the electric field are consistent with Lèvy’s results but gives unphysical results since an infinite value is obtained for a quantity that can be measured., The author acknowledges financial support from the Ministerio de Ciencia e Innovación (MCIN), Spain (Grant No. PID2021-123459OB-C22, MCIN/AEI/10.13039/ 501100011033/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum random number generator based on polarization switching in gain-switched VCSELs

  • Valle-Miñón, Marcos
  • Quirce, Ana
  • Valle, Ángel
  • Gutiérrez, Jaime
Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement., We experimentally study a quantum random number generator based on the random excitation of the linearly polarized modes of a gain-switched vertical-cavity surface-emitting laser (VCSEL). Our device is characterized by having polarization switching under continuous wave operation. By measuring the linear polarization mode that is excited in each pulse we collect a sufficient number of bits to evaluate if a standard statistical test suite is passed. We consider linear and Von Neumann post-processing methods in order to reduce the bias with different levels of bits rejection. The post-processed bit strings pass all tests in the standard test suite for random number generators provided by the National Institute of Standards and Technology (NIST). We finally compare the results obtained with different post-processing functions, including several [n, k, d] linear BCH codes. We show that large values of n and k are the best choice to obtain simultaneously improved throughput and randomness., Ministerio de Ciencia e Innovación (PID2019-110633GB-I00MCIN/AEI/10.13039/501100011033, PID2021- 123459OB-C22 MCIN/AEI/FEDER, UE). A. Quirce acknowledges financial support from Beatriz Galindo program, Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the nonlinear dynamics of VCSEL-based frequency combs induced by optical injection

  • Plaza-Vas, Daniel
  • Valle, Ángel
  • Vermeulen, Nathalie
  • Quirce, Ana
Optical injection (OI) into VCSELs is a powerful tool to control VCSEL behavior and light emission. Previous studies by Doumbia et al. 2021 have shown that OI of a 3-line optical frequency comb (OFC) into a VCSEL allows tailoring the properties of the OFCs emitted in the VCSEL output light. Our efforts extend beyond the previous findings, as for the first time, we study the polarization-resolved nonlinear dynamics maps found in a VCSEL subject to two different types of orthogonal OI, namely continuous-wave (CW) injection and the injection of a 3-line gain-switched (GS) OFC. Our results reveal that, within a significant parameter region (encompassing frequency detuning and injected power), the VCSEL’s nonlinear behaviors induced by the OI of a GS-OFC are mainly determined by two factors: (1) the frequencies of the nonlinear dynamics of the VCSEL under CW OI, and (2) the polarization switching curves obtained under both types of OI. Therefore, (1) and (2) provide guidelines to understand the OFCs obtained at the output of the VCSEL. When injecting a 3-line OFC with 2 GHz frequency comb spacing, we demonstrate OFCs with approximately 50 GHz width at the output of the VCSEL, similar to the experimental results of Doumbia et al. 2021. We also identify the nonlinear dynamics that underpin these results., This research was supported by Fonds Wetenschappelijk Onderzoek (FWO), Belgium and by the Ministerio de Ciencia e Innovación (Spain), (PID2021-123459OB-C22MCIN/AEI/10.13039/501100011033/FEDER, UE.). D. Plaza-Vas and N. Vermeulen acknowledge financial support from FWO, Belgium under Grant G005420N and from VUB-OZR, Belgium. A. Quirce acknowledges financial support from Beatriz Galindo program, Ministerio de Ciencia, Innovación y Universidades (Spain) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

InP-based integrated optical frequency shifter for heterodyne detection applications

  • López-Querol, Pablo
  • Soria-Gómez, Alicia
  • Quirce, Ana
  • Tijero, Jose Manuel G.
  • Esquivias, Ignacio
  • Pérez-Serrano, Antonio
We present the design and characterization of an integrated optical frequency shifter based on an IQ modulator featuring standard building blocks from a generic photonic integration Indium Phosphide (InP) foundry. The device is conceived to be used in applications with low bandwidth requirements such as dual-comb spectroscopy or integrated low-cost LiDARs. An initial analytical study of the system was carried out and subsequently validated by simulations. Then, we obtained experimentally the most relevant parameters of the system and evaluated its performance under frequency shifter operation. Good performance up to 250 MHz is achieved, thus proving its suitability for the intended applications., This work was supported by the grants TED2021-131957B-100 and PID2021-1234590B-C21 funded by Ministerio de Ciencia e Innovación (Spain), MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and ERDF “A way of making Europe”. A.Q. acknowledges the grant PID2021-123459OB-C22 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. and the financial support from Beatriz Galindo program, Ministerio de Ciencia, Innovación Universidades (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing the quality of random number generators through neural networks

  • Crespo, José Luis
  • González-Villa, Javier
  • Gutiérrez, Jaime
  • Valle, Ángel
In this paper we address the use of Neural Networks (NNs) for the assessment of the quality and hence safety of several Random Number Generators (RNGs), focusing both on the vulnerability of classical Pseudo Random Number Generators (PRNGs), such as Linear Congruential Generators (LCGs) and the RC4 algorithm, and extending our analysis to non-conventional data sources, such as Quantum Random Number Generators (QRNGs) based on Vertical-Cavity Surface-Emitting Laser (VCSEL). Among the results found, we have classified the generators based on the capability of the NN to distinguish between the RNG and a Golden Standard RNG (GSRNG). We show that sequences from simple PRNGs like LCGs and RC4 can be distinguished from the GSRNG. We also show that sequences from LCG on elliptic curves and VCSEL-based QRNG can not be distinguished from the GSRNG even with the biggest long-short term memory or convolutional neural networks (CNNs) that we have considered. We underline the fundamental role of design decisions in enhancing the safety of RNGs. The influence of network architecture design and associated hyper-parameters variations was also explored. We show that longer sequence lengths and CNNs are more effective for discriminating RNGs against the GSRNG. Moreover, in the prediction domain, the proposed model is able to deftly distinguish between the raw data of our QRNG and data from the GSRNG exhibiting a cross-entropy error of 0.52 on the test data-set used. All these findings reveal the potential of NNs to enhance the security of RNGs, while highlighting the robustness of certain QRNGs, in particular the VCSEL-based variants, for high-quality random number generation applications., This work was supported by Ministerio de Ciencia e Innovación. PID2021-12345OB-C22 MCIN /AEI /10.13039/ 501100011033/FEDER,UE. J G is partially supported by Grant PID2019-110633GB-I00 funded by MCIN/AEI/10.13039/ 501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical injection locking of longitudinal modes in a discrete mode laser: Application in gain-switched optical frequency combs

  • Quirce, Ana
  • Kelleher, Bryan
  • Valle, Ángel
A detailed experimental study of the effect of external optical injection (OI) on a single-mode discrete mode laser (DML) when the wavelength of the OI is far from that of the solitary DML is presented. We show that the situation observed in Fabry Pérot lasers by Jain et al. extends to single-mode DMLs since injection locking of many longitudinal modes of the device is obtained, giving rise to a wavelength tunability larger than 37 nm. We show that the injection locking range is minimum when injecting close to the longitudinal mode that appears in the free-running DML (q=0). We present the observed nonlinear dynamics of the laser when subject to OI with a wavelength close to a longitudinal mode with q≠0 and in particular, we show that OI induces dynamics simultaneously in several longitudinal modes. Different nonlinear dynamics are observed for positive and negative frequency detunings with respect to the injected mode. We also investigate the effect of OI in optical frequency combs (OFCs) generated by gain-switching the DML in a very wide range of wavelengths of the OI. We show that wavelength tunable injection-locked OFCs are obtained with quasi-continuous wavelength tunability larger than 37 nm., The work of Ana Quirce supported by Beatriz Galindo Program, Ministerio de Ciencia, Innovación y Universidades (Spain). This work was supported by the Ministerio de Ciencia e Innovación, Spain, under Grant PID2021-123459OB-C22 MCIN/AEI/10.13039/ 501100011033/FEDER,UE. (Corresponding author: Angel Valle.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical and experimental analysis of phase noise in semiconductor lasers biased below threshold

  • Pascual de Zulueta, Iker
  • Valle, Ángel
We report a theoretical and experimental study of phase noise in semiconductor lasers when the bias current is below the threshold value. The theoretical study is performed by using two types of rate equations, with additive and multiplicative noise terms. We find the conditions for which the evolution in those rate equations can be described by 1-dimensional and two dimensional Brownian motions, respectively. The main statistical differences between the additive and multiplicative noise models are then illustrated by using the simplified Brownian motion models. Additive and multiplicative noise models predictions are compared with measurements of the phase noise with a coherent receiver using a 90∘ optical hybrid. We develop a novel method to extract the phase noise directly from our measurements, that in contrast to the usual direct method is not based on the analysis of the phase noise difference. The method permits a direct visualization of the phase noise trajectories and a calculation of the averages and the distribution that is valid in the short-time limit. Our results are in very good agreement with the results obtained with the method based on the phase noise difference. Our experimental results show that the variance of the phase noise grows linearly in time and has Gaussian statistics, supporting the modelization of the phase noise statistics with the additive noise model., This work was supported by Ministerio de Ciencia e Innovación. PID2021-12345OB-C22 MCIN/AEI/10.13039/ 501100011033/FEDER,UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental and theoretical study of optical frequency combs in gain-switched Discrete Mode Lasers under optical injection into suppressed longitudinal modes

  • Plaza-Vas, Daniel
  • Duque-Gijón, María
  • Masoller, Cristina
  • Tiana-Alsina, Jordi
  • Valle, Ángel
  • Vermeulen, Nathalie
  • Quirce, Ana
Data will be made available upon reasonable request., In this work, we investigate how low-power continuous-wave (CW) optical injection into suppressed longitudinal modes far from the free-running mode (q = 0) of a single-mode discrete-mode laser (DML) influences the optical frequency combs (OFCs) generated in the DML under gain-switching (GS). In the absence of optical injection, the gain-switched DML emits an OFC at q = 0. Optical injection on a distant suppressed mode (q ≠ 0) produces a second OFC at the injected mode and can also enhance the spectral quality of the q = 0 comb. The effects of optical injection depend on injection power and modulation frequency, and different injected modes lead to OFCs with distinct spectral characteristics. The system is frequency tunable over more than 4 THz. These findings demonstrate a novel, robust, and simple approach for generating single- or dual-comb outputs from a GS-DML, offering potential benefits in multiwavelength communications, broadband spectroscopy, and metrology., Ministerio de Ciencia, Innovación y Universidades (PID2021-123459OB-C22MCIN/AEI/FEDER, UE, CNS2023-143986MICIU/AEI/NextGenerationEU/PRTR); Fonds Wetenschappelijk Onderzoek (G005420N); Vrije Universiteit Brussel-OZR; Agència de Gestió d’Ajuts Universitaris i de Recerca (2021 SGR 00606, FI scholarship); Institució Catalana de Recerca i Estudis Avançats. D. Plaza-Vas and N. Vermeulen acknowledge financial support from FWO, Belgium under Grant G005420N and from VUB-OZR, Belgium. M. Duque, J. Tiana, C. Masoller acknowledge financial support from AGAUR (2021 SGR 00606 and FI scholarship), ICREA Academia., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated saturable-absorber-enhanced power booster for feedback sensitive on-chip pulsed lasers

  • Plaza-Vas, Daniel
  • Quirce, Ana
  • Bente, Erwin
  • Vermeulen, Nathalie
The data that support the findings of this study are available from the corresponding author upon reasonable request., The lack of optical isolators in photonic integrated circuits is a limiting factor for on-chip laser pulse amplification with a Semiconductor Optical Amplifier (SOA) power booster. Indeed, in the absence of optical isolation between an on-chip pulsed laser and the SOA power booster, amplified feedback signals can enter the laser cavity and destabilize the laser output. In this study, we propose an easy-to-implement and effective solution: a fully integrated Saturable Absorber (SA)-enhanced power booster that efficiently amplifies on-chip modelocked laser pulses while isolating the laser cavity from amplified feedback. Our booster design consists of an InP SOA preceded by a short (20–40 μm) InP SA. We demonstrate both experimentally and numerically that the presence of the short SA between the laser cavity and the SOA indeed prevents feedback-induced laser destabilization while still allowing efficient power amplification. The SA is found to induce a small power penalty of the order of 1 dB but, at the same time, allows using higher booster currents while maintaining stable laser operation. As such, our novel SA-enhanced booster design enables the on-chip generation of high-power stable laser pulses for a wide range of application domains., The authors acknowledge financial support from Fonds Wetenschappelijk Onderzoek (Grant Nos. G005420N and G092424N); Vrije Universiteit Brussel-OZR; Ministerio de Ciencia, Innovación y Universidades (Spain) (Grant Nos. PID2021-123459OB-C22MCIN/AEI/FEDER, UE, and CNS2023-143986 MICIU/AEI/NextGenerationEU/PRTR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measurement of the optical phase statistics of single-mode semiconductor lasers biased around the threshold current

  • Valle, Ángel
  • Rosado, Alejandro
  • Soldevila, Urmila
  • Esquivias, Ignacio
The data that support the plots within this study and other findings of this study are available from the corresponding author upon reasonable request., We report on the experimental analysis of the statistics of the optical phase of the light emitted by a distributed-feedback (DFB) laser. We measure the dependence of the phase diffusion coefficient on the applied bias current in the region around the threshold current. We measure the phase noise statistics using three different methods based on i) averages of the noise phase trajectories over different temporal windows, ii) the variance of the phase noise difference, and iii) the frequency noise spectral density. The comparison between the results obtained with these methods is succesful. We obtain that the phase diffusion coefficient monotonously decreases with the bias current in the region around threshold. We finally compare our experimental results with simple analytical expressions for the below and above threshold cases based on Schawlow–Townes laws., Ministerio de Ciencia, Innovación y Universidades (PID2021-123459OB-C21MCIN/AEI/10.13039/501100011033, PID2021-123459OB-C22,MCIN/AEI/FEDER,UE, TED2021-131957B-100MCIN/AEI/10.13039/501100011033)., Peer reviewed