Pasar al contenido principal

TECNOLOGIAS FISICAS AVANZADAS DE PROCESADO DE ALIMENTOS PARA LA MEJORA DE LA FABRICACION ADITIVA DE PRODUCTOS AMILACEOS

PID2021-123516OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Physicochemical properties and 3D printability of pregelatinized corn starch were modulated through pulsed electric fields and ultrasonic treatments

  • Gulzar, Saqib
  • Farràs Moragues, Núria
  • Elez Martínez, Pedro
  • Martín Belloso, Olga
  • Soliva-Fortuny, Robert
While US and PEF treatments have been studied for native corn starch, their effects on the 3D printing behavior of pregelatinizedcorn starch (PGCS) remain largely unexplored. This study is among the first to link these non-thermal treatments to enhancedfunctionality and printability of PGCS. Therefore, this study focused on the impact of US and PEF treatments on thephysicochemical properties and 3D printability of PGCS, which is significant for the development of customized food productsand innovative applications in the food industry. PGCS was subjected to US at amplitudes of 60%–90% for 30 min in 0.5 s on andoff cycles and PEF at an electric field of 9.4 kV/cm, 20 µs pulse width at a frequency of 20 Hz for 100–400 pulses. Both treatmentsdisrupted native granular architecture and induced changes in structural organization. US promoted amylose leaching, resultingin higher amylose contents (up to 36.18%) and improved water and oil absorption capacities (up to 3.86 and 5.37 g/g, respectively).PEF had minimal effect on composition but improved pasting viscosities and gel texture. X-ray diffraction (XRD) and differentialscanning calorimetry (DSC) results revealed reduced crystallinity and elevated gelatinization temperatures for modified PGCS.PEF-treated PGCS hydrogels exhibited improved gel hardness and rheological parameters correlated to high-fidelity, superior 3Dprinted constructs compared to weak US counterparts. Overall, modifications from both techniques enhanced functionalities,with PEF conferring rheological attributes preferable for 3D bioprinting PGCS-based foods. The findings highlight the potentialfor rationally manipulating the physicochemical and processing behavior of starch through non-thermal technologies., The authors are grateful to the Spanish Ministry of Science and Innovationfor the funding of the project PID2021-123516OB-I00. This project hasreceived funding from the European Union’s Horizon 2020 researchand innovation programme under the Marie Skłodowska-Curie grantagreement No. 101034288.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Ultrasound and freeze-thaw modifications of cassava starch: microstructure, functionality, and 3D printing potential

  • Tagrida, Mohamed
  • Gulzar, Saqib
  • Martín Belloso, Olga
  • Elez Martínez, Pedro
  • Soliva-Fortuny, Robert
Starch, used in various applications; offers restricted utilities due to the limited functionalities in its native form. Several methods have been explored to enhance its functionality. Among these, non-thermal processes such as ultrasound (US) and freeze-thaw (FT) cycles impact starch properties, making them promising processes for emerging applications. In this study, starch (50%, w/v in distilled water) was processed (either individually or combined) using US at different amplitudes (70, 80, and 90%) for 30 min at room temperature, and multiple FT (1, 3, and 5) at −40 °C for 3 h per cycle. Amylose content (AC), water holding capacity (WHC), scanning electron microscopy (SEM), and X-ray diffraction (XRD) were measured. The suitability of modified starches for 3D printing was also evaluated. The treatments resulted in modified starches with a decrease in AC varying from 19.5% to 17.1%, and an increase in WHC ranging from 53.7% to 66.1% (p < 0.05). The modified starches exhibited enhanced pasting properties, indicating improved thermal stability and gelation ability. SEM showed increased surface deformation in modified starch granules compared to the smooth surfaces of those unmodified. XRD patterns showed typical A-type peaks; however, starches subjected to combined treatments exhibited a reduction in relative crystallinity. The use of the starches for 3D printing showed that the modified starches had a more defined surface compared to native starch. Therefore, the combined US and FT treatments can be applied to enhance functionality and 3D printability of cassava starch, opening new avenues for its use as a functional material for food development., The authors are grateful to the Spanish Ministry of Science and Innovation for funding of Project No. PID2021-123516OB-I00. Also, this project has received funding from the European Union\u2019s Horizon 2020 research and innovation program under the Marie Sk\u0142odowska-Curie grant agreement No 101034288.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Recent developments in the application of novel technologies for the modification of starch in light of 3D food printing

  • Gulzar, Saqib
  • Oñate Narciso, Joan
  • Elez Martínez, Pedro
  • Martín Belloso, Olga
  • Soliva-Fortuny, Robert
This review summarizes recent research on the use of novel food processing techniques to modify starch for additive manufacturing or 3D food printing applications. It provides an overview of the current state of knowledge on the effects of these techniques on the properties of starch-based materials and their suitability for 3D printing. The findings suggest that physical techniques, including high-pressure processing, pulsed electric field, ultrasonication, and microwave heating, can significantly improve the rheological and mechanical properties of starch-based materials for 3D printing. Moreover, cold plasma, ozone, and enzymatic treatments can also be used to modify starches to have suitable properties for 3D printing, including good flow behavior, high resolution, and adequate strength. Nevertheless, there is a sizable research gap in this area, and much more work has to be done., The authors are grateful to the Spanish Ministry of Science and Innovation for the funding of the project PID2021-123516OB-I00. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101034288.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recent developments in the application of novel technologies for the modification of starch in light of 3D food printing

  • Gulzar, Saqib
  • Oñate Narciso, Joan
  • Elez Martínez, Pedro
  • Martín Belloso, Olga
  • Soliva-Fortuny, Robert
This review summarizes recent research on the use of novel food processing techniques to modify starch for additive manufacturing or 3D food printing applications. It provides an overview of the current state of knowledge on the effects of these techniques on the properties of starch-based materials and their suitability for 3D printing. The findings suggest that physical techniques, including high-pressure processing, pulsed electric field, ultrasonication, and microwave heating, can significantly improve the rheological and mechanical properties of starch-based materials for 3D printing. Moreover, cold plasma, ozone, and enzymatic treatments can also be used to modify starches to have suitable properties for 3D printing, including good flow behavior, high resolution, and adequate strength. Nevertheless, there is a sizable research gap in this area, and much more work has to be done., The authors are grateful to the Spanish Ministry of Science and Innovation for the funding of the project PID2021-123516OB-I00. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101034288.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ultrasound and freeze-thaw modifications of cassava starch: microstructure, functionality, and 3D printing potential

  • Tagrida, Mohamed
  • Gulzar, Saqib
  • Martín Belloso, Olga
  • Elez Martínez, Pedro
  • Soliva-Fortuny, Robert
Starch, used in various applications; offers restricted utilities due to the limited functionalities in its native form. Several methods have been explored to enhance its functionality. Among these, non-thermal processes such as ultrasound (US) and freeze-thaw (FT) cycles impact starch properties, making them promising processes for emerging applications. In this study, starch (50%, w/v in distilled water) was processed (either individually or combined) using US at different amplitudes (70, 80, and 90%) for 30 min at room temperature, and multiple FT (1, 3, and 5) at −40 °C for 3 h per cycle. Amylose content (AC), water holding capacity (WHC), scanning electron microscopy (SEM), and X-ray diffraction (XRD) were measured. The suitability of modified starches for 3D printing was also evaluated. The treatments resulted in modified starches with a decrease in AC varying from 19.5% to 17.1%, and an increase in WHC ranging from 53.7% to 66.1% (p < 0.05). The modified starches exhibited enhanced pasting properties, indicating improved thermal stability and gelation ability. SEM showed increased surface deformation in modified starch granules compared to the smooth surfaces of those unmodified. XRD patterns showed typical A-type peaks; however, starches subjected to combined treatments exhibited a reduction in relative crystallinity. The use of the starches for 3D printing showed that the modified starches had a more defined surface compared to native starch. Therefore, the combined US and FT treatments can be applied to enhance functionality and 3D printability of cassava starch, opening new avenues for its use as a functional material for food development., The authors are grateful to the Spanish Ministry of Science and Innovation for funding of Project No. PID2021-123516OB-I00. Also, this project has received funding from the European Union\u2019s Horizon 2020 research and innovation program under the Marie Sk\u0142odowska-Curie grant agreement No 101034288.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Physicochemical properties and 3D printability of pregelatinized corn starch were modulated through pulsed electric fields and ultrasonic treatments

  • Gulzar, Saqib
  • Farràs Moragues, Núria
  • Elez Martínez, Pedro
  • Martín Belloso, Olga
  • Soliva-Fortuny, Robert
While US and PEF treatments have been studied for native corn starch, their effects on the 3D printing behavior of pregelatinizedcorn starch (PGCS) remain largely unexplored. This study is among the first to link these non-thermal treatments to enhancedfunctionality and printability of PGCS. Therefore, this study focused on the impact of US and PEF treatments on thephysicochemical properties and 3D printability of PGCS, which is significant for the development of customized food productsand innovative applications in the food industry. PGCS was subjected to US at amplitudes of 60%–90% for 30 min in 0.5 s on andoff cycles and PEF at an electric field of 9.4 kV/cm, 20 µs pulse width at a frequency of 20 Hz for 100–400 pulses. Both treatmentsdisrupted native granular architecture and induced changes in structural organization. US promoted amylose leaching, resultingin higher amylose contents (up to 36.18%) and improved water and oil absorption capacities (up to 3.86 and 5.37 g/g, respectively).PEF had minimal effect on composition but improved pasting viscosities and gel texture. X-ray diffraction (XRD) and differentialscanning calorimetry (DSC) results revealed reduced crystallinity and elevated gelatinization temperatures for modified PGCS.PEF-treated PGCS hydrogels exhibited improved gel hardness and rheological parameters correlated to high-fidelity, superior 3Dprinted constructs compared to weak US counterparts. Overall, modifications from both techniques enhanced functionalities,with PEF conferring rheological attributes preferable for 3D bioprinting PGCS-based foods. The findings highlight the potentialfor rationally manipulating the physicochemical and processing behavior of starch through non-thermal technologies., The authors are grateful to the Spanish Ministry of Science and Innovationfor the funding of the project PID2021-123516OB-I00. This project hasreceived funding from the European Union’s Horizon 2020 researchand innovation programme under the Marie Skłodowska-Curie grantagreement No. 101034288.