Pasar al contenido principal

MODELOS BASADOS EN DATOS Y ACTUALIZACION DE MODELOS PARA GEMELOS DIGITALES

PID2021-123654OB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Similarity-based decomposition algorithm for two-stage stochastic scheduling

  • Montes, Daniel A.
  • de Prada, César
  • Pitarch, José Luis|||0000-0001-5356-6321
[EN] This paper presents a novel decomposition method for two-stage stochastic mixed-integer optimization problems. The algorithm builds upon the idea of similarity between finite sample sets to measure how similar the first-stage decisions are among the uncertainty realization scenarios. Using such a Similarity Index, the non-anticipative constraints are removed from the problem formulation so that the original problem becomes block-separable on a scenario basis. Then, a term for maximizing the Similarity Index is included in all the sub-problems objective functions. Such sub-problems are solved iteratively in parallel so that their solutions are used to update the weighting parameter for maximizing the Similarity Index. The algorithm obtains a feasible solution when full similarity among scenario first stages is reached, that is, when the incumbent solution is non-anticipative. The proposal is tested in four instances of different sizes of an industrial-like scheduling problem. Comparison results show that the Similarity Index Decomposition provides significant speed-ups compared with the monolithic problem formulation, and provides simpler tuning and improved convergence over the Progressive Hedging Algorithm., This research is funded by the Spanish MCIN/AEI through research projects a-CIDiT (PID2021-123654OB-C31, PID2021-123654OB-C32) and LOCPU (PID2020-116585GB-I00) . The first author has received financial support from the 2020 call of the pre-doctoral contracts of the University of Valladolid, Spain, co-financed by Banco Santander.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extending the SI Decomposition to Continuous-Time Two-Stage Scheduling Problems

  • Montes, Daniel
  • de Prada, César
  • Pitarch, José Luis|||0000-0001-5356-6321
[EN] Scheduling often involves making decisions in presence of uncertainty, which governs the pricing of raw materials, energy, resource availability, demands, etc. A common approach to incorporate uncertainty in the decision-making process is using two-stage stochastic formulations. Unfortunately, the mathematical complexity of the resulting problems grows exponentially with the number of uncertainty scenarios, which is further complicated by the presence of binary variables The authors have recently proposed a method using the so-called Similarity Index for discrete-time two-stage scheduling problems that enable scenario-based decomposition. This paper extends this method for scheduling problems formulated on a continuous-time basis. The fundamental idea is to use the Similarity Index to meet non-anticipation in the binary variables and Progressive Hedging on the continuous ones. The proposal is tested on a literature case study that consists of a multiproduct plant with a single processing unit. The combined SI-PH decomposition managed to solve the problem much faster than its monolithic counterpart., These results are funded by the Spanish MCIN/AEI as part of the a-CIDiT (PID2021-123654OB-C31, PID2021-123654OB-C32) and LOCPU (PID2020-116585GB-I00) research projects. The first author has received financial support from the 2020 call for pre-doctoral contracts of the University of Valladolid and Banco Santander.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two-Stage Stochastic Scheduling of a Multiproduct Pipeline System using Similarity Index Decomposition

  • Montes, Daniel A.
  • de Prada, César
  • Pitarch, José Luis|||0000-0001-5356-6321
[EN] Multiproduct pipelines are crucial for delivering substantial quantities of refined oil products from major supply centers to clients within a nearby geographical area. Despite the significant infrastructure investment, the associated transportation costs are markedly lower than those incurred with traditional delivery trucks. However, the scheduling of these systems presents a formidable challenge, requiring meticulous planning of pumping runs well in advance to meet the anticipated demands of clients. In this work, we enhance an existing literature model of a multiproduct pipeline system by introducing uncertainty in the customer demand. The problem is then addressed via a two-stage stochastic formulation. The typical drawback with stochastic formulations is the high computational burden required. To address this challenge, we adapt the so-called Similarity Index decomposition, resulting in a 28-fold improvement in CPU time while achieving equivalent solutions compared to solving the full-space problem., These results are funded by the Spanish MCIN/AEI/10.13039 /501100011033/, as part of the a-CIDiT (PID2021- 123654OB-C31) and LOCPU (PID2020-116585GB-I00) research projects. The first author has received financial support from the 2020 call of pre-doctoral contracts of the University of Valladolid and Banco Santander.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrating Continuous and Batch Processes with Shared Resources in Closed-Loop Scheduling: A Case Study on Tuna Cannery

  • Palacín, Carlos G.
  • Vilas, Carlos
  • de Prada, César
  • Pitarch, José Luis|||0000-0001-5356-6321
[EN] Scheduling tasks in production facilities are usually hybrid optimization problems of a large combinatorial nature. They involve solving, in near-real time, the integration of the operation of several batch units of continuous dynamics with the discrete manufacture of items in processing lines. Moreover, one has to deal with uncertainty (process delays, unexpected stops) and the management of shared resources (energy, water, etc.) including decisions made by plant operators: still, some tasks in the scheduling layers are done manually. Manufacturing Execution Systems (MESs) are intended to support plant personnel at this level. However, there is still much work to do in terms of performing automatic scheduling, computed in real time, that guides managers to achieve an optimal operation of such complex cyber-physical systems. This work proposes a closed-loop approach to handle the uncertainty arising when facing the online scheduling of supply lines and parallel batch units. These units often share some resources, so effects due to concurrent resource consumption on the system dynamics are explicitly considered in the presented formulation. The proposed decision support system is tested onsite in a tuna cannery, to handle short-term online scheduling of sterilization processes that deal with limited steam, carts, and operators as shared resources., These results are part of project a-CIDiT, grants PID2021-123654OB-C31 and PID2021-123654OB-C32 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. The authors express their gratitude and dedicate this contribution to Prof. Antonio A. Alonso, who unfortunately passed away in 2020. We thank him for his endless support and continuous guidance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Modelado para optimización dinámica de una planta de esterilización de alimentos, Modelling for dynamic optimization of a food sterilization plant

  • Novoa, Miguel
  • Pitarch, José Luis
  • Antelo, L. T.
  • Vilas Fernández, Carlos
6 pages, 6 figures, 1 table.-- III CEA symposium of the Groups: Control Engineering – Modelling, Simulation and Optimization. 10-12 April, 2024, Vigo, Spain, [EN] In this work, we propose a new mathematical model for the description of the sterilization process of packaged food in steam retorts. The main advantage of such a model with respect to those existing in the literature is that it has been developed to be used in the framework of nolinear model predictive control (NMPC), which requires solving on-line dynamic optimization problems (periods shorter than 5 seconds). In addition, the proposed model describes a number of physical phenomena that had not been taken into account in previous models. In particular, it considers the possibility that: (i) air enters through the purge; (ii) gases exit through the drain; (iii) liquid water and steam in the autoclave are not in equilibrium. The main contribution is the use of the Fischer-Burmeister equation to model the discrete state changes derived from (iii) in an efficient way, [ES] En este trabajo proponemos un nuevo modelo matemático para la descripción del proceso de esterilización de alimentos envasados en autoclaves de vapor. La principal ventaja de dicho modelo con respecto a los existentes en la literatura es que ha sido desarrollado para ser usado en el marco del control predictivo no lineal basado en modelos (NMPC, por sus siglas en inglés), lo que requiere resolver problemas de optimización dinámica en línea (periodos inferiores a 5 segundos). Además, el modelo propuesto describe una serie de fenómenos físicos que no se habían tenido en cuenta en modelos anteriores. En particular, se considera la posibilidad de que: (i) el agua y el vapor en el autoclave no estén en equilibrio; (ii) haya entrada de aire por la purga; (iii) haya salida de gases por el drenaje. La principal contribución es la utilización de la ecuación de Fischer-Burmeister para modelar los cambios de estado discretos derivados de (i) de forma eficiente, Esta investigación forma parte de los proyectos LOCPU (PID2020-116585GB-I00) y a-CIDiT (PID2021-123654OBC32) financiados por MCIN/AEI/10.13039/501100011033, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Desarrollo y calibración de un modelo matemático para control predictivo del proceso de esterilización térmica de alimentos sólidos, Development and calibration of a mathematical model for the predictive control of the solid food esterilization process

  • Novoa, Miguel
  • Pitarch, J. L.
  • Antelo, L. T.
  • Vilas Fernández, Carlos
6 pages, 2 tables, 3 figures.-- XLV Jornadas de Automática,Málaga, 4-6 de septiembre de 2024.-- Poster, [EN] Sterilization of packaged foods is one of the most widely used processes to increase the shelf life of products in the food industry. However, it is an energy- and time-consuming process that, if not carried out properly, can result in unsafe or low-quality products. Mathematical modeling and process optimization are useful tools to avoid these problems. In this work, we propose a new mathematical model for the description of the sterilization process in steam retorts. Regarding the existing models in the literature, our alternative has two clear advantages. On the one hand, it is capable of describing the following physical phenomena: (i) discrete changes in the states derived from steam-water non-equilibrium conditions using the Fischer-Burmeister equation; (ii) air entry through the purge; and (iii) gas exit through the drain. On the other hand, the simulation of the model is efficient so that it can be used in the framework of model-based nonlinear predictive control, which requires solving on-line dynamic optimization problems with periods of less than 5 seconds. In addition, we estimate the model unknown parameters from experimental data, [ES] La esterilización de alimentos envasados es uno de los procesos más utilizados para incrementar la vida útil de productos de la industria alimentaria. Sin embargo, es un proceso que consume energía y tiempo y que, si no se lleva a cabo de forma adecuada, puede resultar en productos inseguros o de baja calidad. El modelado matemático y la optimización de procesos son herramientas útiles para evitar estos problemas. En este trabajo proponemos un nuevo modelo matemático para la descripción del proceso de esterilización de alimentos envasados en autoclaves de vapor. Respecto a los modelos existentes en la literatura nuestra alternativa presenta dos claras ventajas. Por una parte, es capaz de describir los siguientes fenómenos físicos: (i) cambios de estado discretos derivados de condiciones de no equilibrio entre agua y vapor mediante la ecuación de Fischer-Burmeister; (ii) entrada de aire por la purga; y (iii) salida de gases (vapor y aire) por el drenaje. Por otra parte, la simulación del modelo es eficiente lo que permite que pueda ser usado en un esquema de control predictivo no lineal basado en modelos, lo que requiere resolver problemas de optimización dinámica en línea, con periodos inferiores a 5 segundos. Además, estimamos los parámetros desconocidos del modelo a partir de datos experimentales, Esta investigación forma parte de los proyectos LOCPU (PID2020-116585GB-I00) y a-CIDiT (PID2021-123654OB-C32) financiados por MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Modelado multiescala de un esterilizador mediante co-simulación

  • Merino, Alejandro
  • Vilas Fernández, Carlos
  • García-Álvarez, D.
  • Galán-Casado, Santos
  • Ruiz-González, R.
5 pages, 8 figures.-- I Simposio Conjunto de los Grupos Temáticos de CEA de Ingeniería de Control, de Modelado, Simulación y Optimización, y de Educación en Automática, Sevilla, 22-24 Enero 2025, [EN] This article presents a proof of concept for the use of co-simulation to integrate models developed with different tools and types of models through the FMI (Functional Mock-up Interface) standard. The study focuses on modeling a sterilizer composed of three subsystems. At the macroscopic level, the autoclave, its auxiliary equipment, and control systems were modeled using first principles and an object-oriented approach. Meanwhile, the cans inside the autoclave are represented by two models: the liquid, modeled using a Machine Learning Model, and the solid, described by partial differential equations simplified through Proper Orthogonal Decomposition (POD). The article details the subsystem models and their integration via a master algorithm that manages communication and synchronization. The analysis of the main variables of the process shows an adequate behavior of these, which allows validating the proposed scheme, [ES] Este artículo presenta una prueba de concepto sobre el uso de la co-simulación para integrar modelos desarrollados con distintas herramientas y tipos de modelos mediante el estándar FMI (Functional Mock-up Interface). El estudio se aplica al modelado de un esterilizador compuesto por tres subsistemas. A nivel macroscópico, el autoclave, sus equipos auxiliares y sistemas de control se han modelado usando primeros principios y un enfoque orientado a objetos. Por su parte, las latas en el interior del autoclave incluyen dos modelos: el líquido, representado con un modelo de Aprendizaje Automático, y el sólido, modelado con ecuaciones diferenciales parciales simplificadas mediante Proper Orthogonal Decomposition (POD). El artículo detalla los modelos de los subsistemas y su conexión a través de un algoritmo maestro que gestiona la comunicación y sincronización. El análisis de las principales variables del proceso, muestra un comportamiento adecuado de las mismas, lo que permite validar el esquema propuesto, El artículo forma parte de los proyectos: ‘Gestión óptima en tiempo real bajo incertidumbre para gemelos digitales (OptiDit)’, PID2021-123654OB-C33, ‘Modelos basados en datos y actualización de modelos para gemelos digitales’, PID2021-123654OB-C32, y ‘Aprendizaje Avanzado para la Mejora de la Productividad en Factorías Inteligentes’, PID2021-126659OBI00, financiados por el MCIN y por la Unión Europea ‘FEDER’, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimización dinámica y control sobre los flujos de inyección de desinfectante de un proceso de lavado de productos agrícolas en tanques en canal, Dynamic optimization and control over disinfectant injection flows of a fresh produce washing process in flume tanks

  • Moreno-Razo, Ari S.
  • Vilas Fernández, Carlos
  • García, Miriam R.
Comunicaciones presentadas en las XLVI Jornadas de Automática, celebradas en Cartagena, del 3 al 5 de septiembre de 2025, [EN] Washing efficiency is essential to ensure the quality and safety of harvested fresh produces. At the industrial scale, this process is commonly carried out in channel-type washing tanks, where the produce is introduced and transported by a continuous water flow to which a disinfectant is added. Spatio-temporal variations in the incoming product flow pose a challenge to the effective implementation of the process. This study addresses the dynamic optimization of the injection flow to minimize the disinfectant dosage, ensuring that the concentration of bacteria in the washing water remains within the ranges considered safe, even when dealing with fluctuations in the amount of incoming product, [ES] La eficiencia del lavado es esencial para garantizar la calidad y seguridad alimentaria de productos de cosecha, especialmente en aquellos que se consumen frescos (productos de cuarta gama). A nivel industrial, esta práctica se lleva a cabo en tanques en forma de canal, donde los productos cosechados son introducidos y transportados mediante un flujo de agua corriente al que se a˜nade un desinfectante. Las variaciones espacio-temporales en el flujo de entrada de producto representan un desafío para una implementación eficiente del proceso. Este estudio se centra en la optimización dinámica del flujo de inyección para minimizar las dosis de desinfectante, garantizando que la concentración de bacterias en el agua de lavado se mantenga dentro de los rangos considerados seguros, incluso ante fluctuaciones en la cantidad de producto entrante, Agradecemos la financiación recibida de los proyectos PID2022-136817OB-I00 y PID2021-123654OB-C32, financiadas por MCIN/AEI/10.13039/501100011033/FEDER, y la ayuda IN607B 2023/04 de la Xunta de Galicia, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Digital twin for fresh produce washing in flume tanks: Reducing water and sanitiser use while ensuring food safety

  • Moreno-Razo, Ari S.
  • Vilas Fernández, Carlos
  • Vázquez, José Antonio
  • Allende, Ana
  • García, Miriam R.
10 pages, 6 figures, 1 table, Washing fresh produce is essential to remove soil and to inactivate microorganisms that may pose risks in products commonly consumed raw. However, operating continuous flume-tank systems is challenging because of variable produce loads and the spatiotemporal interplay between water quality and sanitiser chemistry. This research addresses this challenge by developing a digital twin that optimally controls water and sanitiser additions during continuous flume tank operation. Its main component is a mechanistic model describing water quality dynamics, sanitiser decay, and microbial inactivation along the tank. This model is used offline to solve a multi-objective optimisation problem that balances water replenishment and sanitiser dosing while enforcing hygiene limits defined as a maximum allowable bacterial concentration at the tank outlet. The resulting Pareto front highlights how optimal solutions shift depending on whether water savings or sanitiser reductions are prioritised, and reveals the impractical volumes of water required when relying solely on water replenishment. For online use, the digital twins adjust the optimal solutions based on real-time measurements of incoming produce mass, ensuring the hygiene requirement under fluctuating loads. This work demonstrates how digital twins can enhance both resource efficiency and microbiological safety in industrial produce washing, We thank the grants PID2021-123654OB-C32, PID2022-136817OB-I00, PID2022-1417080B-I00, and PID2024-157718OB-C32, funded by MCIN/AEI/10.13039/501100011033/FEDER. Additionally, the authors are thankful for the financial support from AGROALNEXT program (MCIN and NextGenerationEU funds, PRTR–C17.I1) and Xunta de Galicia (IN607B 2023/04), Peer reviewed