Pasar al contenido principal

MEMBRANAS DE SALES FUNDIDAS PARA SEPARACION DE CO2 BASADAS EN EUTECTICOS DE OXIDOS: MECANISMOS Y TECNOLOGIA DE FABRICACION

PID2021-124863OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eutectic ceramics of the CeO2 – ZrO2 – MgO system produced by laser-assisted directional solidification

  • Orera, Alodia
  • Oliete, Patricia B.
  • Merino, R. I.
  • Sanjuán, M. L.
Oxide eutectics have great potentiality as structural or functional materials, owing to the outstanding properties derived from the eutectic microstructure. Among them, the eutectic of the ZrO2 – MgO system is particularly noteworthy because of the unusual combination of thermomechanical, optical and electrical properties. In a recent application, Zr1-δMgδO2-δ – MgO eutectic oxides have been used to produce porous supports for molten-carbonate based CO2 separation membranes. Here we explore composite ceramic oxides of the CexZr1-xO2 – MgO (x ​≤ ​0.5) system with eutectic microstructure, with the motivation that incorporating cerium may enhance the CO2 permeation properties. Eutectic composites with different cerium content are produced by a laser-assisted directional solidification technique at variable solidification rate, v. In all cases the composite bicrystal consists of two phases, MgO and a fluorite-like (CexZr1-x)1-yMgyO2-y phase. A purely fibrilar microstructure is found for x ​≥ ​0.3 ​at v ​= ​25 ​mm/h, with MgO fibres embedded within the fluorite-like matrix. The MgO mol% in the eutectic composites decreases from ∼53% for x ​= ​0 to ∼48% for x ​= ​0.5. X-ray and Raman results evidence long-range ordering in a quasi-tetragonal monoclinic symmetry for x ​= ​0.5. Impedance spectroscopy results are consistent with a change from ionic to mainly electronic conductivity when the atmosphere is changed from air or Ar to 5%H2–Ar., The authors acknowledge financial support from the Spanish Ministerio de Ciencia e Innovación and Feder Funds from the European Comission under projects PID2019-107106RB-C32 and PID2021-124863OB-I00 funded by MCIN/AEI/10.13039/501100011033. The Departamento de Ciencia, Universidad y Sociedad del Conocimiento is acknowledged for the financial support to the research group T02_20R. A. O. also acknowledges financial support from the Ramón y Cajal program (RYC2018-025553-I) funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ceramics with eutectic microstructure in the ZrO2–PrOx system

  • Grima, Lorena
  • Peña, J. I.
  • Sanjuán, M. L.
Praseodymium oxides present redox properties analogous to those of Ce-based systems and have been proposed for catalytic applications in combination with CeO2, ZrO2, or both. However, uncertainties remain concerning the nature and redox behavior of Pr-rich mixtures, especially with ZrO2. Here we study the eutectic composites of the ZrO2–PrOx system, focusing on the sensitivity of their microstructure, phase symmetry, and composition to variations of the processing atmosphere from oxidizing to reducing. Mixed oxides have been produced by a laser-assisted directional solidification technique in O2, air, N2, or 5%H2(Ar) environment, and the resulting materials have been analyzed by scanning electron microscopy/energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, and magnetic susceptibility. In air, N2, or 5%H2(Ar) atmosphere, a lamellar, eutectic-like microstructure forms, the major phase being the one with less Pr content. Both the Pr concentration in each phase as the PrOx molar percentage of the eutectic composites decrease as the atmosphere becomes more reducing. Both eutectic phases are fluorite-like when processing in air, whereas in N2 or 5%H2(Ar), the phase with high Pr content is of the A-R2O3 type, and the phase with low Pr content can be described as a fluorite phase containing C-R2O3-like short-range-ordered regions. The results obtained for samples processed in O2 suggest that for high enough pO2 no eutectic forms, in analogy with the ZrO2–CeO2 system. The evolution of the phase composition and symmetry is discussed in terms of the limited stability of the phases found in the ZrO2–Pr2O3 system, namely, A- or C-R2O3-like, beyond a certain Pr oxidation degree and oxygen content., Spanish Government, Grant/AwardNumbers: PID2019-107106RB-C32,PID2021-124863OB-I00, BES-2017-079683;European Union; The financial supportfrom Gobierno de Aragón, Grant/AwardNumber: T02-20R group., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

  • Wang, Shunheng
  • Peña, J. I.
  • Lun, Zhengyan
  • Liu, Juncheng
Directionally solidified Al2O3/Y3Al5O12 (YAG), Al2O3/YAG/ZrO2, Al2O3/GdAlO3 (GAP), Al2O3/GAP/ZrO2 and Al2O3/ZrO2 eutectic/non eutectic ceramics were prepared with laser zone melting. Their microstructure, phase component and shape were investigated. The results indicated that the molar ratio of Zr4+ to rare earth ions (Y3+, Gd3+) in the ZrO2 phase of the ternary eutectic was closed to 2:1. The free energy of chemical reaction was the key to determine the precipitation order of phase. The growth of the firstly-precipitated phase could be divided into the formation of ordered Bravais lattice composed by the oxygen ions, the diffusion of metal cations in this lattice and the change of phase morphology. The unfilled cation gap might be a fast channel for the ion transport. On the same growth plane, the nucleation of the later-precipitated phase began only after the firstly-precipitated phase was fully formed. The triangular was the main ion arrangement way for the stable nucleation and growth of phases. The effects of the precipitation temperature, the phase size, the eutectic type and the growth rate on the microstructure were discussed. This improved theory provided a more reasonable explanation for the formation of rod-shaped, layered, triangular, Chinese script (CS) and cellular microstructures, which might be of significance to regulate the morphology of microstructures., This research was funded by MCIN/AEI/10.13039/501100011033 through the project PID2021-124863OB-I00 and by “ERDF A way of making Europe”; S.W. wants to acknowledge the support of the China Scholarship Council during his sabbatical stay in Zaragoza and the National Natural Science Foundation of China [Grant Nos. 51172161 and 52372066]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic insight into the structural and microstructural properties of La2Ce2O7 ceramics, Visión espectroscópica de las propiedades estructurales y microestructurales de la cerámica La2Ce2O7

  • Sanjuán, M. L.
  • Merino, R. I.
  • Lakshya, Annu Kumar
  • Chowdhury, Anirban
[EN] Ceria-based compounds with trivalent dopant ions are currently being investigated as electrolytes for solid oxide fuel cells operating at low to intermediate temperatures. In these materials, the dependence of the ionic conductivity on the dopant content, the relative cation size and the dopant/vacancy or vacancy/vacancy interactions are the subject of intense research, but there is scarce information about a possible correlation between these properties and microstructural ones, such as texture. Here, we address this question in the heavily doped fluorite-like La2Ce2O7 oxide, using a combination of X-ray diffraction, electron microscopy, optical absorption, Raman scattering and impedance spectroscopy. In all cases, materials with varying degree of 〈1 1 1〉 texture are compared with untextured samples. In this context, the most relevant Raman signatures are the fluorite-like mode at ∼448 cm−1 and a vacancy-related band at ∼578 cm−1. Although remarkable changes were observed upon varying the sintering temperature or the excitation wavelength, both textured and untextured materials displayed similar evolution. A selective enhancement of the vacancy-related band was observed upon decreasing the excitation wavelength from 647 to 488 nm, which is attributed to a resonance phenomenon involving vacancy-related electronic transitions. An indication of incipient vacancy ordering was given by the observation of an intense band at ∼346 cm−1, denoting C-R2O3-like short-range order; its enhancement with the annealing temperature is attributed to the growth of the C-like regions. Conductivity was measured in textured and untextured, fully dense pellets, in the former along and across the texture direction. Impedance plots suggest that the conductivity is dominated by oxide ions and do not allow to separate a grain boundary contribution in these materials with grain size around 1–2 μm. The conductivity amounts to around 10−5 S/cm at 650 K, with activation energy of 1.08–1.16 eV in the temperature range from around 470 to 870 K. Results were similar in textured and untextured materials. We conclude that there is no significant correlation between texture and vacancy concentration or vacancy ordering. A similar conclusion – no influence of texture – is reached concerning the electrical properties., [ES] Los compuestos a base de ceria dopada con iones trivalentes se están investigando como electrolitos para pilas de combustible de óxido sólido que funcionen a temperaturas bajas o intermedias. En estos materiales se ha estudiado profusamente la dependencia de la conductividad iónica con el contenido de dopante, el tamaño relativo de los cationes y las interacciones dopante/vacante o vacante/vacante, pero hay escasa información sobre la posible correlación entre estos factores y propiedades microestructurales como la textura. En este trabajo abordamos esta cuestión en la fluorita defectiva La2Ce2O7, utilizando para su caracterización difracción de rayos X, microscopía electrónica, absorción óptica, dispersión Raman y espectroscopia de impedancia. En cada caso se comparan materiales con distinto grado de textura a lo largo de las direcciones <111> y muestras sin textura. En este contexto, los indicadores más relevantes del espectro Raman son el modo de tipo fluorita en ∼448 cm-1 y una banda relacionada con las vacantes en ∼578 cm-1. Aunque se observaron cambios notables al variar la longitud de onda de excitación o la temperatura de sinterización, la evolución fue similar en materiales texturados y no texturados. La banda relacionada con las vacantes se intensifica al disminuir la longitud de onda de excitación de 647 a 488 nm, lo que se atribuye a un fenómeno de resonancia entre la energía de excitación y transiciones electrónicas asociadas a las vacantes. Por otra parte, la presencia de una banda en torno a 346 cm-1, típica de fases C-R2O3, sugiere que existe un cierto grado de ordenamiento de vacantes a corto alcance. El aumento de la banda con la temperatura de sinterización se atribuye al crecimiento de las regiones de tipo C. Se midió la conductividad eléctrica en cerámicas densas texturadas y no texturadas, en el primer caso paralela y perpendicularmente a la dirección de la textura. Los gráficos de impedancia sugieren que la conductividad se debe principalmente a iones de oxígeno y no permiten separar una contribución de las fronteras de grano en estos materiales con un tamaño de grano de alrededor de 1 a 2 μm. La conductividad es ∼10-5 S/cm a 650 K, con una energía de activación de 1,08 a 1,16 eV en el intervalo de temperaturas de ∼470 a 870 K. Se obtuvieron resultados similares en materiales texturados y no texturados. Se concluye que no existe una correlación significativa entre la textura y la concentración de vacantes o el ordenamiento de las mismas. Se llega a una conclusión similar en lo que se refiere a las propiedades eléctricas., MLS and RIM acknowledge funds for the research through grant PID2021-124863OB-I00 funded by MCIN/AEI/10.13039/501100011033 and through the financial support to the Research Group T02_23R by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento del Gobierno de Aragón. AKL is indebted to the financial support provided by IIT Patna., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase segregation of aged MgCSZ–MgO directionally solidified eutectic composites

  • Oliete, Patricia B.
  • Merino, R. I.
  • Peña, J. I.
  • Sanjuán, M. L.
The improvement of the thermomechanical properties of Mg-partially stabilized zirconia after appropriate thermal treatments is well known. Most studies in this subject have been conducted in polycrystalline materials produced by solid-state reaction. In this work, we analyze the segregation behavior and mechanical properties of solidified eutectic composites of the ZrO2–MgO system, where MgO lamellae or fibers are embedded into a cubic Mg-stabilized zirconia (MgCSZ) containing ∼18 mol% MgO. The eutectics have been aged at 1240 or 1225°C for periods varying between 2 and 24 h. This treatment results in the progressive phase separation of the MgCSZ matrix into different mixtures of tetragonal (t), monoclinic (m), δ (Mg2Zr5O12), and MgO phases. Two types of segregation are observed, according to whether the Mg-rich phase is the metastable δ phase (type I) or MgO (type II). Both types may coexist in the same sample but type I predominates at 1240°C and type II at 1225°C. Type I is mainly of the t + δ type, although for long ageing time the t precipitates transform to monoclinic symmetry, resulting in a final m + δ segregation scheme. In type II segregation, the monoclinic phase is the main Mg-poor product. Hardness and toughness have been studied by the Vickers indentation method. The indentation fracture toughness KIC increases progressively with ageing time and for 24 h treatment is more than doubled with respect to the as-processed eutectic, while the hardness decreases slightly., The authors acknowledge financial support through grant PID2021-124863OB-I00 funded by MCIN/AEI/10.13039/501100011033; CEX2023-001286-S funded by MICIU/AEI/10.13039/ 501100011033 and DGA funds to T02_23R research group., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset supporting the publication “Spectroscopic insight into the structural and microstructural properties of La2Ce2O7 ceramics"

  • Sanjuán, M. L.
  • Merino, R. I.
[Description of methods used for collection/generation of data] This collection of data have been collected by the methods listed below on ceramic pellet samples prepared as indicated in the publication “Is texture related to vacancy amount or ordering in La2Ce2O7?” by M. L. Sanjuán, R. I. Merino, A. K. Lakshya, and A. Chowdhury. (add doi and final reference). As a summary, the composition of the ceramics are 50 mol% La2O3 + 50 mol% CeO2 (referred to as LC50 in the following). Two different kind of powders were used: a nanopower prepared in MAPS (Materials’ Process - Structure Correlations) Laboratory, Metallurgical and Materials Engineering, Indian Institute of Technology Patna, Bihta, Bihar 801106, India (as in K. Singh, R. Kumar, A. Chowdhury, Synergistic effects ofultrasonication and ethanol washing in controlling the stoichiometry, phase-purity and morphology of rare-earthdoped ceria nanoparticles, Ultrason. Sonochem. 36 (2017)182–190, http://dx.doi.org/10.1016/j.ultsonch.2016.11.030.) that generated textured ceramic pellets (to be referred to in the following as TLC50_S####, where #### indicates the sintering temperature in ºC); and a commercial powder (from Trixotech Advanced Materials Pvt. Ltd., India) of the same composition that gave rise upon sintering to untextured pellets, (to be referred to in the following as ULC50_S####, where #### indicates the sintering temperature in ºC). They were prepared by shaping the powder into pellets using a uniaxial pressure of approximately ~750 MPa in a hardened stainless-steel die with a 12 mm diameter. Subsequently, the were pressureless sintering up to 1400 °C for a duration of 2 hours with a heating rate of 4 °C per minute. - Raman spectra: Raman spectra were recorded in a DILOR XY spectrometer equipped with a liquid nitrogen cooled CCD detector, using as excitation lines an Oxxius laser at 532 nm (model LCX-532S) and the 647, 568 and 488 nm lines of a mixed Kr+/Ar+ laser (model Melles Griot 643-RYP-A02). - Impedance spectra: A SI1260 Impedance Gain-Phase Analyzer (Solartron Instruments, Farnborough Hampshire UK) was used to measure the impedance in the frequency range from 0.1 to 107 Hz. Ag-paste electrodes (RS 186-3600, RS Components, UK) were painted on pellets of samples TLC50_S1400 and ULC50_S1400 in the temperature range from 200 to 400 °C. Two different electrode arrangements were used to measure the conductivity. ACROSS: Ag-paste electrodes were brush-painted on opposite faces of the pellet with around 0.25 cm2 area and 0.05 cm thick. This configuration was used for conductivity measurements across the pellets. ALONG: Another piece of sample TLC50_S1400 was used to get an estimate of the conductivity of the sample in the direction parallel to the pellet large surface. Two Ag-paste electrodes separated approximately 2 mm were painted on one side. The reported data were measured in an air atmosphere, starting from the higher temperature spectra. Relevant dimensions of samples and electrode positioning are given in the corresponding datafiles. - Optical transmittance and reflectance data: The UV-VIS-NIR hemispherical reflectance of the textured (TLC50) and untextured (ULC50) ceramic pellets sintered a 1000 °C, 1300 °C and 1400 °C was measured using a Cary5000 UV-VIS-NIR spectrophotometer (Agilent Technologies) equipped with the internal diffuse reflectance accessory. The reflectance was measured with reference with a Spectralon® large plate, on pellets around 0.5 mm thick. In-line transmission measurements were also performed on the same UV-VIS-NIR spectrophotometer., [Methods for processing the data] - Raman spectra: Spectra were scaled to the same intensity of the main mode (fluorite-like mode). - Conductivity: The conductivity reported in the conductivity tables is calculated from sample Resistance data extracted from the Impedance Spectra (excluding electrode contribution), using the relationship between conductivity and resistance and the measured geometrical factor. Sample dimensions were measured with a digital caliper. The temperature was measured with a K-type thermocouple. - Optical transmittance and reflectance data are given as measured., - PID2021-124863OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 - Financial support to the Research Group T02_23R by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento del Gobierno de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Binary and ternary eutectic composites of the CaO – ZrO2 – MgO system for porous ceramic supports

  • Oliete, Patricia B.
  • Merino, R. I.
  • Peña, J. I.
  • Sanjuán, M. L.
We recently reported on the use of c-ZrO2-MgO eutectic composites produced by directional solidification as supports for CO2-selective membranes based on molten carbonates. Here, we explore other compositions, particularly within the CaO – ZrO2 – MgO system, with the ultimate goal of improving the membrane permeation by either increasing the support’s ionic conductivity or reducing its tortuosity. The three eutectic-like composites studied display MgO fibres embedded in single-phase or two-phase matrices. The composite with 8.5CaO/48.5ZrO2/43MgO mol% composition consists of MgO fibres in an oxide-ion conducting c-ZrO2 matrix containing both Ca and Mg. A binary CaZrO3 – MgO eutectic-like composite forms at ∼33CaO/35ZrO2/32MgO mol% with MgO fibres in a Ca-poor, Mg-doped CaZrO3 matrix displaying mixed oxide-ion and hole conductivity. For 22CaO/45ZrO2/33MgO mol% composition, a ternary eutectic forms with MgO fibres at the interfaces of CaZrO3 and c-ZrO2 phases. Acid etching tests were conducted to verify the feasibility of fabricating a porous support., The authors acknowledge financial support through grant PID2021–124863OB-I00 funded by MCIN/AEI/10.13039/501100011033; CEX2023–001286-S funded by MICIU/AEI/10.13039/ 501100011033 and DGA funds to the T02_23R research group., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reactivity of Mg-stabilised zirconia porous support towards molten alkaline carbonates [Dataset]

  • Merino, R. I.
  • Sanjuán, M. L.
  • Oliete, Patricia B.
  • Peña, J. I.
  • Safarzadeh Khosrowshahi, Mobin
The present dataset compiles the source data generated for the investigation of the evolution of microstructure and phases of MgO stabilized zirconia with aligned micron sized pores, produced by directional solidification followed by acid etching, after being contacted to Li-Na-K molten eutectic carbonate mixture at temperatures from 600 to 800 °C in CO2-lean gas streams (room air), in order to elucidate failure origins. This research is relevant as the ceramic has been previously identified as a candidate support for dual ceramic - molten carbonate CO2 separation membranes. The analysis of the present dataset and additional data is part of a research work intended for publication elsewhere., - PID2021-124863OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 - CEX2023-001286-S funded by MCIN/AEI/ 10.13039/501100011033 - PRE2022-102008 funded by MCIN/AEI/ 10.13039/501100011033 and FSE+ - Financial support to the Research Group T02_23R by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento del Gobierno de Aragón., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No