Pasar al contenido principal

DESCARBONIZACION DE SECTORES INTENSIVOS EN ENERGIA. CAPTURA DE CO2 EN MOTORES DE GAS PARA LA CIRCULARIZACION DE COMBUSTIBLES SOSTENIBLES Y ALMACENAMIENTO VIABLE DE EMISIONES

PID2021-125137OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of the impurities O2 or NO present in non-purified flue gas from oxy-fuel combustion processes for carbon capture and storage technology

  • Melendo, Ana Pilar
  • Berbés, Roberto
  • Blanco, Sofía T.
  • Fernández, Javier
CO2/impurities cocapture in CCS technology allows reducing the purification costs and avoiding the emission of pollutants into the atmosphere. The viability of the transport by pipeline and the geological storage of the non-purified flue gas from oxy-fuel combustion of biomass and other processes, keeping the impurities O2 or NO in the stream along with CO2, is assessed considering thermodynamic and hydraulic aspects. For this, we experimentally determined, under CCS conditions, the density, vapor-liquid equilibrium, and speed of sound of three CO2 + O2 and CO2 + NO mixtures as binary models of the gas, and we calculated their Joule-Thomson coefficients from the experimental data. Additionally, we compared the values calculated for the determined properties using the equations of state EOS-CG, GERG-2008 and PC-SAFT to our results of CO2 + O2, validating all three equations for this system. For the CO2 + NO mixtures, only PC-SAFT could be applied, which was also validated using the parameters obtained in this work. Finally, we calculated several selected CCS parameters from our data and concluded that both O2 and NO have negative effects on the transport and storage steps of this technology, which are negligible in the case of NO with the investigated concentrations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CO2 capture feasibility by Temperature Swing Adsorption in heavy-duty engines from an energy perspective

  • García-Mariaca, Alexander
  • Llera-Sastresa, Eva
  • Moreno, Francisco
This study made an energy performance analysis and an estimate of the volume and weight of an innovative carbon capture and storage (CCS) system by temperature swing adsorption (TSA) hybridised with an organic Rankine cycle (ORC) working with the waste heat contained in the exhaust gases of a natural gas engine. To achieve this, two varying-sized engines are simulated across the entire rpm range and under partial engine loads. Subsequently, energy simulations are conducted at two CO2 capture rates (CCR) and employing three sorbents (MOF-74-Mg, PPN-6-CH2-DETA and activated carbon) to compare the CCS-ORC performance. Results demonstrate the viability of installing CCS-ORC systems in heavy-duty vehicles since they require less than 6 % of the total volume of the studied vehicles. The engine power penalty induced by the CCS-ORC system varies from 1.9 % with MOF-74-Mg to 23.5 % with activated carbon at 100 % of CCR, leading to a maximum 6.14 % rise in engine fuel consumption. Finally, the maximum CO2 capture process energy consumption is 631 kJ/kgCO2, 9.9 % lower than the literature reported for TSA. Based on these promising results, applying the hybridised system presented in this paper for CO2 capture in sectors that use heavy-duty engines is a strategy to implement.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Techno-economic assessment for the practicability of on-board CO2 capture in ICE vehicles

  • García-Mariaca, Alexander
  • Llera-Sastresa, Eva
The transport sector is a major energy-intensive and significant contributor to CO2 emissions. With heavy-duty internal combustion engine vehicles (HD-ICEVs) set to remain a primary mode of transport for goods and passengers, the European Union plans to implement CO2 emission rights starting in 2027 to address this issue. To mitigate CO2 emissions, on-board carbon capture technologies can be an innovative solution, but a comprehensive analysis from several perspectives must be carried out. To tackle the existing knowledge gap on this subject, this paper presents the techno-economic assessment of a CO2 capture and storage system hybridised with an organic Rankine cycle (CCS-ORC) integrated into an HD-ICEV whose technical ability has been previously demonstrated. In this paper, the capture installation based on temperature swing adsorption is designed for two engines with different displacement volumes, at varying carbon capture rates (CCR), and using three different sorbents. The size of the thermal devices is estimated as the determinant factor for the required space and the installation costs. The results show that the heat exchangers can achieve a minimum area density of 100 m2/m3, while the most significant temperature swing adsorption device obtained is scarcely 0.26 m3. The carbon abatement cost (CAC) obtained for the CCS-ORC system is less than 35 €/tCO2 at 100 % of CCR, and with an engine size greater than 18 and 21 L, the CAC of the CCS-ORC system is zero at 100 and 70 % of CCR, respectively. Furthermore, with a CO2 emissions right price above 71 €/tCO2, the projected payback of the initial investment of the CCS-ORC system is achieved in the lifespan of the HD-ICEV for all sorbents evaluated at 100 % of CCR.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Techno-economic analysis of integrating an on-board CCS system and a PtG technology in a heavy vehicle fleet

  • García Mariaca, Alexander
  • Perpiñán, Jorge
  • Carreño Sayago, Uriel Fernando
Decarbonising the heavy-duty transport sector requires switching internal combustion engine (ICE) fuel from fossil to synthetic fuels. In this context, on-board carbon capture and storage (OCCS) in ICEs could provide the CO2 needed by Power-to-gas (PtG) technologies to produce synthetic natural gas (SNG), which is then consumed again by the vehicle fleet, closing in this way the carbon loop. This study presents a techno-economic analysis of a heavy-duty vehicle fleet integrating an OCCS system with a PtG plant. The OCCS system operates by temperature swing adsorption where two sorbents, PPN-6-CH2-DETA and zeolite 13X, are evaluated at carbon capture rates (CCR) of 70 % and 100 %. A fifth scenario examined the effect of varying the H2:CO2 ratio in the methanation plant at 100 % CCR using PPN-6-CH2-DETA. Both systems were simulated using Aspen Plus and AVL Boost softwares. Moreover, a sensitivity analysis was conducted considering three key performance indicators: the CO2 tax, natural gas (NG), and electricity prices. The results indicate that the carbon abatement cost reaches a break-even point at 150 €/tCO₂ for a fleet size of 400 vehicles. However, the capital expenditures do not achieve payback within 20 years due to the high operational expenditures and low incomes in the evaluated scenarios. The sensitivity analyses show that the CO2 tax and the NG price must be higher than 400 €/tCO₂ and 160 €/MWh, respectively, to compensate for the current electricity price and allow the proposed systems to be techno-economic feasible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Viability of the Cocapture of CO2 and Impurities from Oxy-Fuel Combustion and Other Processes in Carbon Capture and Storage Technology

  • Almazán, Héctor
  • Fernández, Javier
  • Blanco, Sofía T.
The feasibility of cocapturing CO2 with SO2, CO, and (O2 or NO) from unpurified flue gas produced by oxy-fuel combustion and other processes was assessed by determining the influence of the simultaneous presence of these impurities on selected carbon capture and storage (CCS) operational parameters. These parameters were calculated based on experimental results obtained under CCS conditions. The density, vapor–liquid equilibrium, and speed of sound of [CO2 + 3.0038 mol % O2 + 0.09035 mol % SO2 + 0.17032 mol % CO] and [CO2 + 0.1410 mol % NO + 0.09100 mol % SO2 + 0.17002 mol % CO] mixtures were experimentally determined at temperatures between 263 and 373 K and pressures of up to 30 MPa for density and 190 MPa for speed of sound. Joule–Thomson coefficients and isentropic compressibilities of the mixtures were calculated from our experimental results. Using experimental and calculated data, we assessed the predictive capability of the EOS-CG, GERG-2008, and PC-SAFT equations of state. The simultaneous presence of the investigated impurities at the studied concentrations adversely affects the transport and storage steps in CCS; however, the behavior of the NO-containing mixture is very similar to that of pure CO2. The implications of the chemical effects of the impurities were overlooked.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental evaluation of zeolite 13X and activated carbon as adsorbents in a carbon capture system for ICE exhaust gases

  • García Mariaca, Alexander
  • Llera Sastresa, Eva
  • Moreno, Francisco
  • Carreno Sayago, Uriel Fernando
Given the urgent need to mitigate climate change, reducing CO2 emissions produced by internal combustion engines (ICEs) remains a critical challenge in the transport sector. Onboard carbon capture (CC) systems have emerged as a promising alternative, attracting growing research interest in recent years. However, most studies are limited to simulations, with experimental evidence still scarce. Based on the above, this study experimentally evaluates zeolite 13X (Z13) and activated carbon (AC) as adsorbents for CO2 capture in ICEs. For this purpose, an adsorption-based CC system was integrated into the exhaust duct of an ICE operating under partial loads and at two engine speeds. The experimental data were subsequently employed to develop a simulation case study aimed at performing an energy assessment of a carbon capture and storage (CCS) system based on temperature swing adsorption. The results show that the adsorbent Z13 demonstrated a 13 % higher CO2 adsorption capacity and a 33 % longer capture duration than AC, though average carbon capture rates (CCR) remained moderate (25 % for Z13 and 16 % for AC). The case study results showed that the carbon capture and storage (CCS) system with Z13 achieves a maximum CCR of up to 37 %, an energy penalty of approximately 30 % of the engine’s power output and an average energy consumption for CO2 capture of 3900 kJ/kgCO2. Conversely, the CCS system with AC did not provide suitable CCR or energy performance under any scenario. The case study also demonstrates that the CCS system has a better performance when the engine is operated at medium or higher loads.