Pasar al contenido principal

INGENIERIA MOLECULAR DE MATERIALES BIDIMENSIONALES Y DE CARBONO POROSO PARA ALMACENAMIENTO ELECTROQUIMICO DE ENERGIA BASADO EN ZINC

PID2021-125246OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NbSe2 Nanosheets/Nanorolls Obtained via Fast and Direct Aqueous Electrochemical Exfoliation for High-Capacity Lithium Storage

  • Fernández Carrasco, Daniel
  • García Dalí, Sergio
  • Villar Rodil, Silvia
  • Munuera Fernández, José María
  • Raymundo-Piñero, Encarnación
  • Paredes Nachón, Juan Ignacio
Layered transition-metal dichalcogenides (LTMDs) in two-dimensional (2D) form are attractive for electrochemical energy storage, but research efforts in this realm have so far largely focused on the best-known members of such a family of materials, mainly MoS2, MoSe2, and WS2. To exploit the potential of further, currently less-studied 2D LTMDs, targeted methods for their production, preferably by cost-effective and sustainable means, as well as control over their nanomorphology, are highly desirable. Here, we report a quick and straightforward route for the preparation of 2D NbSe2 and other metallic 2D LTMDs that relies on delaminating their bulk parent solid under aqueous cathodic conditions. Unlike typical electrochemical exfoliation methods for 2D materials, which generally require an additional processing step (e.g., sonication) to complete delamination, the present electrolytic strategy yielded directly exfoliated nano-objects in a very short time (1-2 min) and with significant yields (∼16 wt %). Moreover, the dominant morphology of the exfoliated 2D NbSe2 products could be tuned between rolled-up nanosheets (nanorolls) and unfolded nanosheets, depending on the solvent where the nano-objects were dispersed (water or isopropanol). This rather unusual delamination behavior of NbSe2 was explored and concluded to occur via a redox mechanism that involves some degree of hydrolytic oxidation of the material triggered by the cathodic treatment. The delamination strategy could be extended to other metallic LTMDs, such as NbS2 and VSe2. When tested toward electrochemical lithium storage, electrodes based on the exfoliated NbSe2 products delivered very high capacity values, up to 750-800 mA h g-1 at 0.5 A g-1, where the positive effect of the nanoroll morphology, associated to increased accessibility of the lithium storage sites, was made apparent. Overall, these results are expected to expand the availability of fit-for-purpose 2D LTMDs by resorting to simple and expeditious production strategies of low environmental impact., D.F.C., S.G.-D., S.V.R., J.M.M., and J.I.P. gratefully acknowledge funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00, and by Plan de Ciencia, Tecnología e Innovación (PCTI) 2018–2022 del Principado de Asturias and the ERDF through grant IDI/2021/000037. S.G.-D. is grateful to the Spanish MINECO for his predoctoral contract [BES/2016 077830]. E.R.-P. thanks the Région Centre val de Loire in France [Project APR-IR SCAP-3D, convention n°2017-00117284] for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-dimensional transition metal dichalcogenides beyond MoS2 for the catalytic reduction of nitroarenes: MoSe2 exhibits enhanced performance

  • Martínez-Jodar, Alberto
  • Villar Rodil, Silvia
  • Salvadó, M. A.
  • Fernández Carrasco, Daniel
  • Pertierra, P.
  • Recio, J. M.
  • Paredes Nachón, Juan Ignacio
Two-dimensional (2D) MoSe2 nanosheets were investigated as a catalyst for nitroarene reduction in the context of water treatment and demonstrated to exhibit a higher activity than their more studied MoS2 counterpart. Density functional theory (DFT) calculations disclosed a feasible nitroarene reduction pathway on 2D MoSe2, which involved passivation of the active site by oxygen from the nitro group and its reactivation by a reducing hydride. DFT analysis also provided an explanation for the isomer selectivity displayed by the 2D MoSe2 catalyst (towards, e.g., 2-, 3- and 4-nitroaniline). To facilitate their practical implementation, the bare MoSe2 nanosheets were coated with colloidal stabilizers, and were also immobilized on polymer foam, where they could be re-used for several consecutive catalytic cycles with no significant loss of activity. Overall, the present results open the prospect of 2D transition metal dichalcogenides beyond MoS2 as competitive nanocatalysts for the reduction of nitroarenes and other organic compounds., A. M.-J., S. V.-R., D. F. C., J. I. P. gratefully acknowledge funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00, and by Plan de Ciencia, Tecnología e Innovación (PCTI) 2018-2022 del Principado de Asturias and the ERDF through grant IDI/2021/000037. A. M.-J. is grateful to the Spanish MINECO for his pre-doctoral contract (PRE2019-087583). The characterization of the graphene dispersions by DLS was performed at the ICTS NANBIOSIS by the Nanostructured Liquids Unit (U12) of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN), located at the IQAC−CSIC. M. A. S, P. P. and J. M. R. gratefully acknowledge funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-122585NB-C21, and by the Principado de Asturias and the ERDF through grant AYUD/2021/51036. We are very grateful to Dr. Alaa Adawy from the Laboratory of High-Resolution Transmission Electron Microscopy and to Dr. Pablo Manrique García from the Mass Spectrometry Laboratory (Scientific and Technical Services, University of Oviedo) for their expert assistance with the HR-TEM and SAED measurements, and the UHPLC/HR-MS analyses, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increasing the efficiency and cycle life of Na-O2 batteries based on graphene cathodes with heteroatom doping

  • Enterría González, Marina
  • Mysyk, R.
  • Medinilla, L.
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Rincón, I.
  • Fernández-Carretero, F. J.
  • Gómez, K.
  • del Amo, J. M.López
  • Ortiz-Vitoriano, N.
To overcome the challenges of Na-O2 batteries with respect to efficiency, capacity, and cycle life as well as to develop cheap, metal-free, and abundant electrocatalysts, we explored boron and nitrogen-functionalized graphene aerogels prepared by the hydrothermal self-assembly of graphene oxide with subsequent thermal reduction. The results showed an improve of both the cycling overpotential and the coulombic efficiency for the functionalized graphene aerogels. However, the nitrogen-containing cathode presented a shortened cycle life and decreased charging stability. The postmortem analysis of the full discharge, and the full discharge and charge cathodes demonstrated that nitrogen functionalization triggered the formation of solid parasitic products that passivate the cathode surface, thus resulting in a poorer electrochemical performance. By contrast, functionalization with boron-containing groups demonstrated to be a more promising strategy due to minimized parasitic products, leading to lower oxygen reduction and evolution overpotentials with a concomitantly enhanced cell efficiency vs. the undoped cathodes. This resulted in a cycle life of 70 cycles at a relatively high current density of 0.1 mA cm−2 with a capacity cut-off of 0.5 mAh cm−2. Our study underscores that functionalization with heteroatoms simultaneously alters multiple characteristics of graphene-based materials, including their chemistry, texture and morphology, which in turn presents a critical impact on the electrochemical response of the resultant Na-O2 cells., This work was funded by the European Union (Graphene Flagship-Core 3, Grant number 881603) and the Basque Country Government (CIC energiGUNE’20 of the ELKARTEK program, N° Exp. KK-2020/0078). J.I.P. and S.V.-R. acknowledge funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00, and by Plan de Ciencia, Tecnología e Innovación (PCTI) 2018-2022 del Principado de Asturias and the ERDF through grant IDI/2021/000037. N. Ortiz-Vitoriano thanks Ramon y Cajal grant (RYC-2020-030104-I) funded by MCIN/AEI/10.13039/501100011033 and by FSE invest in your future., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomimetic nucleotide-graphene hybrids for electrocatalytic oxygen conversion: Quantifying biomolecule mass loading

  • Letona-Elizburu, A.
  • Enterría González, Marina
  • Aziz, A.
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Carrasco Rodríguez, Javier
  • Ortiz-Vitoriano, N.
Metal-free electrocatalysts for the electrochemical conversion of gases constitute an important asset for a sustainable energy transition. Nucleotides act as redox mediators in the electron transport chain to reduce oxygen in cellular respiration. The biomimicry of such an efficient natural mechanism could be utilized to address the challenges associated with electrochemical gas conversion technologies, such as sluggish kinetics and high overpotentials. Multiple descriptors are generally reported to benchmark the activity of electrocatalysts where the turnover frequency (TOF) is claimed to be the most accurate criterion. Here, a library of graphene nanosheets-nucleotide hybrid materials was prepared, and the electrocatalytic performance towards ORR/OER reactions of a graphene-flavin mononucleotide hybrid was evaluated by rotating disc electrode experiments and TOF estimation. The determination of catalyst loading and dispersion is especially relevant when assessing the intrinsic activity of a catalyst and, therefore, the amount of nucleotide electrocatalyst loaded into the graphene support was thoroughly quantified by a combination of characterization techniques. Density functional theory calculations supported the observed experimental trends, both on the adsorption rate of a given nucleotide on graphene and the catalytic activity of a specific hybrid material. This work constitutes an avenue to predict nature-mimicking electrocatalysts for efficient energy storage., This work was funded by the R&D&I project PID2020–117626RA-I00, funded by MCIN/AEI/10.13039/ 501100011033. N. Ortiz-Vitoriano thanks Ramon y Cajal grant (RYC- 2020-030104-I) funded by MCIN/AEI/10.13039/501100011033 and by FSE invest in your future. The authors also thank SGI/IZO-SGIker UPV/EHU for providing supercomputing resources. Partial funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00, and by Plan de Ciencia, Tecnología e Innovación (PCTI)2018-2022 del Principado de Asturias and the ERDF through grant IDI/2021/000037 is also gratefully acknowledged. The authors also gratefully acknowledge Dr. Zhang for AFM images, Dr. Cid for the graphene XPS and Ms. Medinilla for the SEM-EDX measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-Dimensional MoS2 Nanosheets Derived from Cathodic Exfoliation for Lithium Storage Applications

  • Martínez-Jodar, Alberto
  • Villar Rodil, Silvia
  • Munuera Fernández, José María
  • Castro Muñiz, Alberto
  • Coleman, Jonathan N.
  • Raymundo-Piñero, Encarnación
  • Paredes Nachón, Juan Ignacio
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., The preparation of 2H-phase MoS2 thin nanosheets by electrochemical delamination remains a challenge, despite numerous efforts in this direction. In this work, by choosing appropriate intercalating cations for cathodic delamination, the insertion process was facilitated, leading to a higher degree of exfoliation while maintaining the original 2H-phase of the starting bulk MoS2 material. Specifically, trimethylalkylammonium cations were tested as electrolytes, outperforming their bulkier tetraalkylammonium counterparts, which have been the focus of past studies. The performance of novel electrochemically derived 2H-phase MoS2 nanosheets as electrode material for electrochemical energy storage in lithium-ion batteries was investigated. The lower thickness and thus higher flexibility of cathodically exfoliated MoS2 promoted better electrochemical performance compared to liquid-phase and ultrasonically assisted exfoliated MoS2, both in terms of capacity (447 vs. 371 mA·h·g−1 at 0.2 A·g−1) and rate capability (30% vs. 8% capacity retained when the current density was increased from 0.2 A·g−1 to 5 A·g−1), as well as cycle life (44% vs. 17% capacity retention at 0.2 A·g−1 after 580 cycles). Overall, the present work provides a convenient route for obtaining MoS2 thin nanosheets for their advantageous use as anode material for lithium storage., A.M.-J., S.V.-R. and J.I.P. gratefully acknowledge funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033), as well as the European Regional Development Fund (ERDF, A Way of Making Europe) through grant PID2021-125246OB-I00 and by Plan de Ciencia, Tecnología e Innovación (PCTI) 2018-2022 del Principado de Asturias and the ERDF through grant IDI/2021/000037. A.M.-J. is grateful to the Spanish MCIN for his pre-doctoral contract (PRE2019-087583). J.M.M. acknowledges funding from a Margarita Salas Fellowship from the Spanish Ministry of Universities (ref. MU-21-UP2021-03071726050)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring Zinc-Doped Manganese Hexacyanoferrate as Cathode for Aqueous Zinc-Ion Batteries

  • Beitia, Julen
  • Ahedo, Isabel
  • Paredes Nachón, Juan Ignacio
  • Goikolea, Eider
  • Ruiz de Larramendi, Idoia
Aqueous zinc-ion batteries (AZiBs) have emerged as a promising alternative to lithium-ion batteries as energy storage systems from renewable sources. Manganese hexacyanoferrate (MnHCF) is a Prussian Blue analogue that exhibits the ability to insert divalent ions such as Zn<sup>2+</sup>. However, in an aqueous environment, MnHCF presents weak structural stability and suffers from manganese dissolution. In this work, zinc doping is explored as a strategy to provide the structure with higher stability. Thus, through a simple and easy-to-implement approach, it has been possible to improve the stability and capacity retention of the cathode, although at the expense of reducing the specific capacity of the system. By correctly balancing the amount of zinc introduced into the MnHCF it is possible to reach a compromise in which the loss of capacity is not critical, while better cycling stability is obtained., This research was funded by Gobierno Vasco/Eusko Jaurlaritza, project IT1546-22 and by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR, projects TED2021-131517B-C21 and TED2021-131517B-C22, as well as by MICINN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF, A way of making Europe) through project PID2021-125246OB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorisation of microalga Chlorella sp. into furans in the presence of Nb2O5 catalysts

  • Lima, Serena
  • García-López, Elisa I.
  • Krivtsov, Igor
  • Ilkaeva, Marina
  • Bornes, Carlos
  • Mafra, Luís
  • Liotta, Leonarda F.
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Marcì, Giuseppe
  • Scargiali, Francesca
Despite the interest in niobia-based catalysts and the importance of biomass valorisation, studies on these catalysts typically utilize model substrates like simple sugars. In this study, a series of niobium oxide-based catalysts was prepared for the application in aqueous phase catalytic conversion of sugars extracted from Chlorella sp. microalga into value-added furans. The solid catalysts were firstly characterized by various techniques including X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Raman and X-ray photoelectron (XPS) spectroscopy as well as low-temperature N2 physisorption. Moreover, the acidity of the catalysts was assessed by using the temperature-programmed NH3 desorption (NH3-TPD), by titration of water suspended catalyst with NaOH solution, and by P-bearing molecular probes loaded catalysts through 31P and 1H solid-state nuclear magnetic resonance (NMR) techniques. Herein, we focused on the catalytic transformation of Chlorella sp. and glucose solution as model molecule into furans. The best Nb2O5 catalysts for valorizing Chlorella sp. into furans exhibited a larger number of Brønsted acid sites, achieving conversion yields to 5-HMF and furfural of ca. 20–22 % with respect to the extracted sugars from algae. The results showed a discernible dependence of the conversion yields to 5-HMF and furfural on catalyst acidity, specific surface area, and the presence of the Brønsted acid sites. Conversely, when using the glucose solution as substrate is concerning, the highest yield to 5-HMF was reached by using a catalyst that showed also the presence of Lewis acid sites. A systematic investigation of the structure–activity relationships in niobium oxide application for aqueous phase dehydration using real biomass substrates to obtain furanic derivatives has not been documented thus far. Therefore, the current research is significant as it demonstrates the feasibility of transforming the carbohydrate content in microalgal biomass into furans by identifying the best catalyst to use., IK acknowledges support by Spanish MCINN (PID2020-113558RB-C41) and Gobierno del Principado de Asturias (IDI-2021-000048). SV-R and JIP gratefully acknowledge funding by Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00, and by Plan de Ciencia, Tecnología e Innovación (PCTI) 2018-2022 del Principado de Asturias and by ERDF through grant IDI/2021/000037. This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020, and LA/P/0006/2020, financed by national funds through the FCT/MEC (PIDDAC). We also acknowledge funding from project PTDC/QUI-QFI/28747/2017 (GAS2MAT-DNPSENS-POCI-01-0145-FEDER-028), financed through FCT/MEC and cofinanced by FEDER under the PT2020 Partnership Agreement. The NMR spectrometers are part of the National NMR Network (PTNMR) and are partially supported by Infrastructure Project 022161 (cofinanced by FEDER through COMPETE 2020, POCI and PORL, and FCT through PIDDAC). SL acknowledges support by European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement 865974) and with the co-funding of European Union, European Social Fund – REACT EU, PON Ricerca e Innovazione 2014- 2020, Azione IV.4 “Dottorati e contratti di ricerca su tematiche dell’innovazione” and Azione IV.6 “Contratti di ricerca su tematiche Green” (DM 1062/2021). MI acknowledges FCT for Researcher Position (CEECIND/00546/2018) and Beatriz Galindo Scholarship (MU-23-BG22/00145)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically tuning graphene via anodic exfoliation for enhanced performance in aqueous zinc-based electrochemical energy storage applications

  • Fernández Carrasco, Daniel
  • Álvarez Rubiera, Enrique
  • Villar Rodil, Silvia
  • Martínez Jódar, Alberto
  • Díez Tascón, Juan Manuel
  • Suárez García, Fabián
  • Paredes Nachón, Juan Ignacio
Graphene materials are attractive for use in novel aqueous electrochemical energy storage devices, including aqueous zinc-ion batteries (AZIBs) and hybrid capacitors (AZICs). Ideally, such materials should be readily accessible by eco-friendly routes and possess physicochemical features beneficial for the intended application. Here, we propose an anodic exfoliation strategy, using a proper combination of common salts/bases as the aqueous electrolyte, for the preparation of highly oxidized graphenes with some control over the populations of their oxygen groups and retention of electrical conductivity (∼102–103 S m−1). As an active cathode material for AZIC cells, the hydrophilic, carboxyl-enriched anodic graphene processed into a compact film outperformed reduced graphene oxides derived from common routes (e.g., Hummers' method), in terms of capacity and rate capability. Furthermore, the performance of this new anodic graphene was enhanced by combining it with a multifunctional biomolecule (flavin mononucleotide), which promoted the cathode wettability and provided extra capacity due to its redox-active center, particularly at higher currents. The carboxyl-enriched graphene was also shown to act as an effective coating layer for the protection of the zinc metal electrode in AZICs/AZIBs, extending its cycle life for longer than is usually attained with carbon-based protective coatings., Funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00, by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR through grant TED2021-131517B–C22, as well as by Plan de Ciencia, Tecnología e Innovación (PCTI) 2018–2022 del Principado de Asturias and the ERDF through grant IDI/2021/000037. E.A-R. and A.M-J. are grateful to the Spanish MCIN for their pre-doctoral contracts (PRE2022-104458 and PRE2019-087583, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical functionalization of graphene nanosheets with iodoacetic acid towards supercapacitor electrodes

  • García Dalí, Sergio
  • Fernández Carrasco, Daniel
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Díez Tascón, Juan Manuel
Graphene nanosheets show great potential as electrode materials for supercapacitors due to their high surface area and excellent electrical conductivity. However, the low hydrophilicity of graphene nanosheets limits their electrochemical performance in aqueous supercapacitor applications. To enhance their electrochemical performance, we investigate the use of iodoacetic acid as an electrolytic functionalization agent for graphene nanosheets. Here, we demonstrate the successful electrolytic functionalization of graphene nanosheets under cathodic conditions in aqueous medium. The resulting material exhibits a high structural quality and carboxyl groups on the surface, which increases the hydrophilicity and wettability of the material. The applied voltage and the concentration of iodoacetic acid have been found to be key factors to optimize the process in order to get the maximum functionalization degree. The electrochemical performance demonstrates that iodoacetic acid functionalized graphene nanosheets exhibit significantly improved specific capacitance (220F/g at 0.5 A/g) and cycling stability of the symmetric cell compared to pristine graphene nanosheets, highlighting the potential of electrochemical functionalization to improve the performance of graphene-based materials in energy storage applications., S.G.-D. is grateful to MINECO for his pre-doctoral contract (BES/2016 077830). D. F._C., S. V.-R., J. I. P. gratefully acknowledge funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluating the influence of physicochemical characteristics of porous carbons on their cathode performance in aqueous zinc-ion hybrid capacitors

  • González Martínez, Sara
  • Castro Muñiz, Alberto
  • Villar Rodil, Silvia
  • Álvarez Centeno, Teresa
  • Suárez García, Fabián
  • Paredes Nachón, Juan Ignacio
Owing to their high surface area, tunable pore size/hydrophilicity and good electrical conductivity, porous carbons are intensively investigated as a cathode material for aqueous zinc-ion hybrid capacitors (AZICs). Still, the correlation between these features and cathode performance has remained relatively underexplored. Here, we investigate a set of porous carbons with different characteristics as AZIC cathodes, and reveal how their properties impact some of their key performance metrics, such as capacity and rate capability. The minimum pore width that took part in AZIC charge storage was estimated to be ∼0.65 nm by a methodology that is generally applicable to other types of capacitors and electrolytes. The effect of pore width on rate capability was also explored. Specifically, supermicropores (0.7–2 nm wide) contributed to rate capability only up to moderately high current densities (<5 A g−1), the presence of small mesopores being required to provide significant capacity retention at higher currents. Further, the hydrophilicity of the porous carbons was quantitatively evaluated in the form of an areal density of hydrophilic sites from the analysis of water adsorption isotherms. However, this parameter did not have any noticeable impact on their performance as AZIC cathodes, at least in the areal density range investigated here., Funding by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) as well as the European Regional Development Fund (ERDF, A way of making Europe) through grant PID2021-125246OB-I00 is gratefully acknowledged. S. G.-M. is grateful to European Union NextGenerationEU and Principado de Asturias “Programa Investigo, Mecanismo de recuperación y Resiliencia” for her “Yo investigo” pre-doctoral contract. We are also grateful to Cabot Corp. for the Vulcan XC72R carbon black, and Kuraray Europe GmbH for the FR-20 and YP-50F activated carbons., Peer reviewed