Pasar al contenido principal

DESARROLLO DE MATERIALES CEMENTICIOS ECOEFICIENTES, CON BAJO IMPACTO Y ALTA DURABILIDAD

PID2021-125810OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical and experimental evaluation of the passive pre-chamber concept for future CNG SI engines

  • Payri, Raul|||0000-0001-7428-5510
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Bori-Fabra, Óscar|||0000-0002-7850-3973
  • Barbery-Avila, Ibrahim Ignacio
[EN] The third decade of the 21st century is set to be one of the most relevant in terms of the transition of methods and forms of using different energy sources, with short and medium-term developments on the road to decarbonization. One of the most widely accepted measures on this path is the reduction of CO2 emissions from internal combustion engines, which is why different concepts are being studied in order to optimize combustion. Furthermore, this research focuses on developing a suitable Spark-Ignition (SI) engine configuration integrating the passive pre-chamber ignition concept (TJI), together with a high compression ratio and the use of the Miller cycle, in order to exploit the benefits of using Compressed Natural Gas (CNG) as fuel. Thus, the novelty of this investigation is the detailed evaluation of the aforementioned SI engine architecture by state-of-the-art CFD simulations and a broad experimental campaign, to understand the advantages of the combined technologies against a conventional SI engine operating with gasoline. The pre-chamber technology is able to overcome the issues associated with the lower laminar flame speeds of CNG, and the reduction of turbulence caused by prematurely closing the intake valve with the Miller cycle. The experimental results showed that the new engine definition achieved higher levels of indicated efficiency compared to the baseline engine (around a 3% increase at high load/speed conditions). Moreover, the addition of EGR allows to further improve the engine performance, extending the load limit in the low-end torque region of the engine map. Finally, a full dynamic 1D model of a current passenger car vehicle was developed to perform transient driving cycle simulations, showing a reduction of 15% in fuel consumption and 25% in CO2 emissions for the new engine definition compared to the baseline engine., The authors want to express their gratitude to CONVERGENT SCI-ENCE Inc. and Convergent Science GmbH for their kind support for the 0D, 1D and CFD calculations with the CONVERGE software. The work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion through grant number PID2021-12581OB-C21.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Eco-toxicity assessment of industrial by-product-based alkali-activated binders using the sea urchin embryogenesis bioassay

  • Santos, Jorge
  • Chimenos, Josep Maria
  • Maldonado Alameda, A.
  • Rodríguez Romero, Araceli
  • Cifrian, Eva
  • Andres, Ana
New cement-based materials such as alkali-activated binders (AABs) or geopolymers allow the incorporation of waste or industrial by-products in their formulation, resulting an interesting valorization technique. Therefore, it is essential to inquire about the potential environmental and health impacts throughout their life cycle. In the European context, a minimum aquatic toxicity tests battery has been recommended for construction products, but their potential biological effects on marine ecosystems have not been considered. In this study, three industrial by-products, PAVAL® (PV) aluminum oxide, weathered bottom ash (WBA) resulting from incinerator bottom ash and glass cullet recycling waste (CSP), were evaluated as precursors in the AAB formulation from an environmental point of view. To determine the potential effects on marine environment caused by the leaching of contaminants from these materials into seawater, the leaching test EN-12457-2 and an ecotoxicity test using the model organism sea urchin Paracentrotus lividus were conducted. The percentage of abnormal larval development was selected as endpoint of the toxicity test. Based on the results obtained from the toxicity tests, AABs have less damaging impact (EC50 values: 49.2%–51.9%) on the marine environment in general than raw materials. The results highlight the need to stablish a specific battery of toxicity tests for the environmental assessment of construction products on marine ecosystem, 11 páginas
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development of alternative porous magnesium potassium phosphate cements as thermal insulating materials

  • Giró Paloma, Jessica
  • Mañosa Bover, Jofre
  • Maldonado Alameda, Alex|||0000-0002-6816-6774
  • Alfocea Roig, Anna
  • Huete Hernández, Sergio|||0000-0002-8439-702X
  • Chimenos Ribera, Josep Maria
  • Formosa Mitjans, Joan
Magnesium potassium phosphate cement (MKPC), a type of chemically bonded phosphate ceramic (CBPC), presents a promising alternative to ordinary Portland cement (OPC). This study focuses on developing sustainable MKPC (sust-MKPC) as a thermally passive material for building applications. A low-grade magnesium oxide (LG-MgO) industrial by-product was utilized to formulate sust-MKPC, with hydrogen peroxide employed as an air-entraining agent (AEA) to induce high porosity and enhance thermal insulation while supporting sustainability goals by reducing energy consumption in climate control systems. Seven formulations incorporating varying hydrogen peroxide contents (0, 1, 2, 3, 5, 7.5, and 10 wt.%) were prepared to evaluate the impact of AEA on the thermal and physicomechanical properties. Comprehensive characterization, including porosity and thermal conductivity measurements, revealed that increasing the AEA content significantly improved thermal inertia and lowered thermal conductivity due to porosity. However, this enhancement was accompanied by a marked reduction in mechanical strength and density, highlighting the trade-off between thermal performance and structural integrity in porous sust-MKPC formulations., The authors of the Universitat de Barcelona would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2021 SGR 00708). DIOPMA is a certified agent of TECNIO in the category of technology developers from the Government of Catalonia. The authors acknowledge the support of CYTED Network ECoEICo-Circular Economy as a Strategy for a More Sustainable Construction Industry and the COST Action CircularBImplementation of a Circular Economy in the Built Environment. This research was supported by the Spanish Government with the Grant PID2021-125810OBC21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and with the grant CNS2022-135800 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. The authors would like to thank the Catalan Government for the quality accreditation and funding given to their research group DIOPMA (2021 SGR 00708). This work is also partially supported by Magnesitas Navarras, S.A. (FBG312160)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of alternative porous magnesium potassium phosphate cements as thermal insulating materials

  • Giró Paloma, Jessica
  • Mañosa Bover, Jofre
  • Maldonado Alameda, Alex
  • Alfocea Roig, Anna
  • Huete Hernández, Sergio
  • Chimenos Ribera, Josep Maria
  • Formosa Mitjans, Joan
Magnesium potassium phosphate cement (MKPC), a type of chemically bonded phosphate ceramic (CBPC), presents a promising alternative to ordinary Portland cement (OPC). This study focuses on developing sustainable MKPC (sust-MKPC) as a thermally passive material for building applications. A low-grade magnesium oxide (LG-MgO) industrial by-product was utilized to formulate sust-MKPC, with hydrogen peroxide employed as an air-entraining agent (AEA) to induce high porosity and enhance thermal insulation while supporting sustainability goals by reducing energy consumption in climate control systems. Seven formulations incorporating varying hydrogen peroxide contents (0, 1, 2, 3, 5, 7.5, and 10 wt.%) were prepared to evaluate the impact of AEA on the thermal and physicomechanical properties. Comprehensive characterization, including porosity and thermal conductivity measurements, revealed that increasing the AEA content significantly improved thermal inertia and lowered thermal conductivity due to porosity. However, this enhancement was accompanied by a marked reduction in mechanical strength and density, highlighting the trade-off between thermal performance and structural integrity in porous sust-MKPC formulations., The authors of the Universitat de Barcelona would like to thank the Catalan Government for the quality accreditation given to their research group DIOPMA (2021 SGR 00708). DIOPMA is a certified agent of TECNIO in the category of technology developers from the Government of Catalonia. The authors acknowledge the support of CYTED Network ECoEICo-Circular Economy as a Strategy for a More Sustainable Construction Industry and the COST Action CircularBImplementation of a Circular Economy in the Built Environment. This research was supported by the Spanish Government with the Grant PID2021-125810OBC21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and with the grant CNS2022-135800 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. The authors would like to thank the Catalan Government for the quality accreditation and funding given to their research group DIOPMA (2021 SGR 00708). This work is also partially supported by Magnesitas Navarras, S.A. (FBG312160)., Peer Reviewed, Postprint (published version)