Pasar al contenido principal

ALTERNATIVAS PARA EL DESARROLLO DE CEMENTOS LC3 A PARTIR DE RESIDUOS GENERADOS EN ESPAÑA

PID2021-125890OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of accelerators on cement mortars using fluid catalytic cracking catalyst residue (FCC): enhanced mechanical properties at early curing ages

  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Gimenez-Carbo, Ester|||0000-0002-2856-4081
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Supplementary cementitious materials (SCMs) have been used in the construction industry to mainly reduce the greenhouse gas emissions associated with Portland cement. Of SCMs, the petrochemical industry waste known as fluid catalytic cracking catalyst residue (FCC) is recognized for its high reactivity. Nevertheless, the binders produced using SCMs usually present low mechanical strength at early curing ages. This study aims to assess the effect of different accelerating additives (KOH, sodium silicate SIL, commercial additive SKR) on the mechanical strength of mortars containing FCC. The results show that after only 8 curing hours, the compressive strength gain of the FCC mortars containing SKR was over 100% compared to the FCC mortar with no additive (26.0 vs. 12.8 MPa). Comparing the compressive strength of FCC mortar containing SKR to the control mortar, the enhancement is spetacular (6.85 vs. 26.03 MPa). The effectiveness of the tested accelerators at 8¿24 curing hours was KOH ¿ SIL < SKR, whereas it was KOH < SIL < SKR for 48 h¿28 days. The thermogravimetric data confirmed the good compatibility of FCC and the commercial accelerator., This research work forms part of a project supported by Agencia Estatal de Investigación of the Government of Spain -PID2021-125890OB-I00. M.M. Tashima wishes to thank the Spanish Ministry of Universities and the Universitat Politècnica de València for the grant María Zambrano for attraction of international talent , funded by the European Union Next Generation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grinding method and sulfate content influence on LC3 cement production using waste as spent fluid catalytic cracking catalyst (FCC) and marble dust

  • Vargas-Samboni, Paola
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Tobon, J. I.
[EN] This article examines the effects of two grinding methods to producing Limestone Calcined Clay Cement (LC3), using two types of waste materials: fluid catalytic cracking residue (FCC) and marble cutting residue (MR). In the production of LC3 cement, the grinding process plays a crucial role in determining the quality of the final product. To ensure the proper reactivity of this new LC3 formulation, the sulfate content is carefully regulated by the addition of gypsum. The optimum sulfate content was investigated through several studies, and the reactivity of the cement pastes was examined using diverse techniques. The compressive strength of the mortars was assessed at various curing periods. The microcalorimetric studies determined that the optimum sulfate content for the mixtures was consistent across both grinding methods. However, the compressive strength tests revealed that the optimum sulfate content varied between 3.1% and 4.0%, depending on both the grinding method used and the curing age analyzed., This study has been funded by the Spanish Ministry of Science and Innovation, "Proyectos de Generacion de Conocimiento" of the "Plan Estatal de Ciencia, Tecnologia e Innovacion 2021-2023, PID2021-125890OB-100", and also by funding grant PRE2022-101340 for Paola Vargas Samboni.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimisation of using low-grade kaolinitic clays in limestone calcined clay cement production (LC3)

  • Vargas-Samboni, Paola
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Macián-Benajas, Ana María|||0000-0001-6580-7831
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Tobón, Jorge Iván
  • Martirena, Fernando
[EN] LC3 (limestone calcined clay cement) is poised to become the construction industry¿s future as a so-called low-carbon-footprint cement. Research into this subject has determined the minimum kaolinite content in calcined clays to guarantee good mechanical performance. This study examines the use of clay from the Valencian Community (Spain), which has a lower kaolinite content than the recommended amount (around 30%) for use in LC3 and how its performance can be enhanced by replacing part of that clay with metakaolin. This study begins with a physico-chemical characterisation of the starting materials. This is followed by a microstructural analysis of cement pastes, which includes isothermal calorimetry, thermogravimetry, and X-ray diffraction tests at different curing ages. Finally, this study analyses the mechanical performance of standard mortars under compression to observe the evolution of the control mortars and the mortars with calcined clay and metakaolin over time. The results show that the LC3 mortars exhibited higher compressive strength in the mixtures with higher calcined kaolinite contents, achieved by adding metakaolin. Adding 6% metakaolin increased the compressive strength after 90 days, while 10% additions surpassed the control mortar¿s compressive strength after 28 days. Mortars with 15% metakaolin exceeded the control mortar¿s compressive strength after just 7 curing days. The hydration kinetics showed an acceleration of LC3 hydration with metakaolin additions due to the nucleation effect and the formation of monocarboaluminate and hemicarboaluminate (both AFm phases). The results suggest the potential for combining less reactive materials blended with highly reactive materials., This study has been funded by the Spanish Ministry of Science and Innovation, 'Proyectos de Generacion de Conocimiento' of the Plan Estatal de Ciencia, Tecnologia e Innovacion 2021-2023, PID2021-125890OB-100, and also by funding grant PRE2022-101340 for Paola Vargas Samboni. The authors thank the company KAOSA S.A. for supplying natural clay and also the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of spent fluid catalytic cracking catalyst (FCC) in Limestone Calcined Clay Cement (LC3) systems: Studies in pastes and mortars

  • Vargas-Samboni, Paola
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • J.I.Tobon
[EN] This study evaluates the substitution of calcined clay for a waste from the petrochemical industry, spent fluid catalytic cracking catalyst (FCC), as a source of reactive aluminosilicates in Limestone Calcined Clay Cements (LC3) systems. Three carbonate types were used to make cement-type LC3: a high-purity calcium carbonate, waste from the marble industry, and another from a dolomite soil source. LC3 blends were prepared by mixing 50 wt% OPC, 5 wt% calcium sulfate dihydrate, 30 wt% FCC and 15 wt% from each carbonate source. A mixture than substituting the carbonate source for a siliceous source was prepared to analyse the influence of carbonate phases in LC3 systems. The hydration process of the LC3 blends was studied by X-ray diffraction, thermogravimetric analyses, isothermal calorimetry and FESEM. Mechanical properties were studied by measuring compressive strength at 7, 28 and 90 days. The obtained results corroborated that the mortars prepared with LC3 cements using the FCC obtained higher compressive strength than the control mortar prepared with ordinary Portland cement (OPC) at 28 and 90 curing days. It has been demonstrated that FCC is a by-product that can substitute calcined clay, and the different sources of carbonates such as high purity, waste or contaminated with magnesium do not interfere with the performance of this type of cement., The authors wish to thank the cement chemistry laboratory of the Department of Materials and Minerals, Universidad Nacional de Colombia-Medellin, which performed the calorimetry test reported in this paper. The Spanish Ministry of Science and Innovation financed this study with "Projects for the Generation of Knowledge" of the 2021-2023State Plan for Scientific, Technical, and Innovation Research, with identification code: PID2021-125890OB-100. In addition, together The Ministry with FSE + also finances the scholarship PRE2022-101340 in favour of Paola Vargas Samboni. Finally, M.M. Tashima wishes to thank the Spanish Ministry of Universities and the Universitat Politecnica de Valencia for the grant "Maria Zambrano for attraction of international talent" funded by European Union-Next Generation. Thanks also go to the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spent fluid catalytic cracking catalyst (FCC) as a viable substitute for enhancing low-grade kaolinite clays in LC3 systems

  • Vargas-Samboni, Paola
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Tobon, J. I.
  • Martirena, F.
[EN] Limestone Calcined Clay Cement (LC3) is a promising alternative to Ordinary Portland Cement (OPC) for reducing CO2 emissions. However, the widespread availability of high-quality kaolinitic clays required for its production is limited. This study investigates the enhancement of LC3 mixtures using a low-grade calcined kaolinitic clay (L-CC), with the employment of a waste derived from the petrochemical industry. In this context, this waste is a silicoaluminous material denominated spent fluid catalytic cracking catalyst (FCC). The L-CC was partially replaced (doped process) with FCC at 6%, 10%, and 15% by weight. The pozzolanic reactivity, hydration kinetics, phase evolution, and mechanical properties of the mixtures doped with FCC were evaluated and compared against control LC3 mixture made with a high-grade calcined kaolinitic clay (H-CC). Here, the R3 test was used to characterise the reactivity of both calcined clays and FCC. Thermogravimetric analysis (TGA) and X-ray diffraction (XRD) confirmed that FCC addition enhanced pozzolanic activity, leading to a greater portlandite consumption and the formation of additional C-(A)-S-H and AFm phases. Consequently, compressive strength improved with increasing FCC content. After 28 curing days, the mortar containing 6% FCC achieved a 21.2% improvement in compressive strength compared to the non-doped LC3 system. At the same curing ages, the improvements in the mortars with 10% and 15% of FCC were 33.7% and 58.3% respectively. These values confirmed the potential of waste FCC to improve mixtures with low-grade calcined kaolinitic clays., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study has been funded by the Spanish Ministry of Science and Innovation, Proyectos de Generación de Conocimiento of the Plan Estatal de Ciencia, Tecnología e Innovación 2021 2023, PID2021-125890OB-100 , and also by funding grant PRE2022-101340 for Paola Vargas Samboni.