Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differences on carboxylic acids bioproduction from soluble carbohydrates or proteins in a sequencing batch reactor, Deciphering the influence of the volumetric and specific organic loading rate

  • Vázquez-Fernández, Ana|||0000-0002-9690-229X
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Carrera, Julian|||0000-0002-2599-2312
Acidogenic fermentation (AF) has been extensively explored. However, the impact of operational parameters on AF has led to inconsistent results. In this work, AF experiments were performed in a sequencing batch reactor (SBR) using simulated wastewaters solely containing soluble carbohydrates or proteins as carbon sources to independently assess the impact of the volumetric organic loading rate (OLRv) and of the specific organic loading rate (OLRs). When only carbohydrates were used, the main effluent components were acetic and butyric acids at OLRv of 6.0 g COD L-1 d-1, while changing OLRv over 11.0 g COD L-1 d-1 gave acetic acid and ethanol as main components. Conversely, if the carbon source consisted solely of proteins, increasing the OLRv or the OLRs had minimal impact on the AF performance and on the effluent composition. Also, in the case of carbohydrate experiments, increasing the OLRs from 2.3 to 3.8 g COD g-1 VSS d-1 promoted chain elongation reactions, as caproic acid formation was also observed. Besides, at the highest OLRv tested in this work for protein experiments (18.5 g COD L-1 d-1), it was obtained the maximum isocaproic acid concentration using mixed microbial cultures and without adding any external electron donor. The SBR configuration proved to be an adequate system, especially when proteins were used as carbon source, since it makes possible to keep low the OLRs and to reduce the hydrolysis limitations. Finally, the bacterial genera detected in the reactors notably changed between both substrates. Future work must be focused on identifying carboxylic acid producing-genera from proteins.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploring the effects of substrate composition on acidogenic fermentation of carbohydrate-protein mixtures

  • Vazquez Fernandez, Ana|||0000-0002-9690-229X
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Carrera, Julian|||0000-0002-2599-2312
The organic composition of the substrate is a pivotal factor that significantly influences the performance of acidogenic fermentation processes. Despite its importance, the impact of this parameter on acidification yields, effluent composition, and bacterial communities remains inadequately understood. This study presents a comprehensive and systematic analysis of acidogenic fermentation experiments, where the sole variable was the substrate's organic composition. Utilizing a sequencing batch reactor under consistent conditions (volumetric and specific organic loading rates, pH, and temperature), simulated wastewater substrates with varying proportions of soluble carbohydrates (C) and proteins (P): 100%P, 75%P/25%C, 50%P/50%C, 25%P/75%C, and 100%C was investigated. The results reveal that substrates comprising mixtures of carbohydrates and proteins achieve higher degrees of acidification, carboxylic acid production yields, and organic matter in the form of acids in the effluent compared to substrates solely composed of carbohydrates or proteins. Notably, an increased protein proportion in the influent correlates with reduced selectivity towards specific acids. It was possible to obtain linear correlations between the protein content in the substrate and the effluent composition of butyric, isobutyric, and isovaleric acids. Furthermore, the presence of different bacterial genera in the reactor were successfully linked to the effluent components corresponding to the various substrate compositions tested. This work sheds light about the critical role of substrate organic composition in acidogenic fermentation performance, providing valuable insights for optimizing acidogenic fermentation under controlled operational parameters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sustainable valorization of slaughterhouse solid waste, A review of characterization, conditioning, hydrolysis and biotransformation strategies

  • Jiménez-Urpi, Montserrat
  • Carbonell Chacón, Sergi
  • Jubany, Irene|||0000-0001-6112-4558
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Baquerizo, Guillermo|||0000-0001-7404-4995
The meat processing industry generates significant quantities of waste, including solid animal by-products (ABPs) and slaughterhouse wastewater (SWW). For instance, based on global meat production in 2020 (approximately 250 million tons), slaughterhouse activities can generate up to 2250 million m³ of SWW and around 375 million tons of ABPs annually. While SWW is typically treated on-site using conventional technologies, ABPs are managed in external facilities employing traditional methods such as incineration, landfilling or rendering. These practices not only intensify environmental and health issues but also hinder the potential of valorization of ABPs into high-value products. Recent advancements in biological processes have explored the transformation of ABPs into valuable products, such as biogas through anaerobic digestion (AD), predominantly at lab-scale. However, the hydrolysis of ABPs remains a critical bottleneck due to their complex composition and high organic content, requiring extended processing times and large reactor volumes, which limit industrial-scale applications. This review evaluates current and emerging practices for the treatment and valorization of slaughterhouse waste, with a focus on transforming these residues into high-value products, promoting sustainability in the meat industry. This study identifies and characterizes ABP fractions suitable for biological processes and emphasizes the role of waste conditioning and hydrolytic strategies aimed at enhancing the efficiency of biological based processes. Key factors influencing hydrolysis performance are discussed alongside the integration of pretreated waste in industrial AD process. The review provides a critical analysis of existing methods, highlighting their gaps, and identifies opportunities to optimize biological waste conversion for sustainable and high value bioproduct generation.
Dipòsit Digital de Documents de la UAB
Otro producto de investigación Plan de Gestión de Datos (DataManagementPlan)

ORganic matter and nItroGEN valorisation on sidestream of an urban WWTP (ORIGEN)

  • Carrera, Julian|||0000-0002-2599-2312
  • Pérez Cañestro, Julio|||0000-0002-0119-5570
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Isern Cazorla, Laura|||0000-0003-3141-3978
  • Vázquez Fernández, Ana
  • Olmo i Cerdà, Lluc|||0000-0001-6001-4832
  • Ospina Mora, Diana Carolina|||0000-0002-3635-0307
En esta base de datos se presentan los datos experimentales obtenidos en el proyecto ORIGEN, clasificados según el objetivo específico del proyecto y el tipo de experimento realizado. Los datos con acceso abierto de esta base son aquellos ligados a una publicación científica en una revista de revisión por pares en open access. Los datos experimentales que aún no se han publicado todavía no son accesibles. La base de datos se irá actualizando y ampliando a medida que los datos experimentales se publiquen en open access en revistas de revisión por pares. Los datos accesibles se encuentran en dos formatos: 1. Hojas de cálculo con formato .xlsx, 2. Archivos de lectura .pdf.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polyhydroxyalkanoates production by an advanced food-on-demand strategy, The effect of operational conditions

  • Mineo, Antonio|||0000-0002-5346-1041
  • Isern-Cazorla, Laura|||0000-0003-3141-3978
  • Rizzo, Carla|||0000-0002-5157-1773
  • Piccionello, Antonio Palumbo
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Mannina, Giorgio|||0000-0002-5405-7147
Despite the increasing number of studies related to the polyhydroxyalkanoate (PHA) production from sewage sludge of wastewater treatment plants, there is still a gap in the correlation between the operational conditions, such as the organic loading rate (OLR), and the intracellular polyhydroxyalkanoate (PHA) content, productivity and final recovery of the polymer. Therefore, this work aims to provide experimental data on PHA productivity and purity in view of scaling up the process to an industrial level taking into account process parameters. In view of that, three OLR were applied during the selection of PHA-accumulating bacteria in sewage sludge. Then, the biomass was harvested and subjected to batch accumulation experiments at two organic loads per dosage by employing a tailor-made software to adopt an automated feed-on-demand strategy, which allowed for 30-56 h of accumulation tests in stand-alone mode. Finally, an improved protocol for PHA extraction has been applied. Experimental results show that the maximum PHA content (60% w/w) was achieved using the highest organic load per dosage during the accumulation test with the biomass selected at the highest OLR (1.8 g COD L d). Also, the extraction protocol efficiency was proven with four samples with different PHA content, achieving recovery yield as high as 78 ± 3 % with a purity of 89 ± 2 %, thus demonstrating that the adopted strategy might be beneficial for industrial use.