Pasar al contenido principal

FUNDAMENTOS Y OPTIMIZACION DE LA PRODUCCION DE BIOPRODUCTOS A PARTIR DE CIANOBACTERIAS TRATANDO EFLUENTES RESIDUALES

PID2021-126564OB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phycobiliprotein recovery coupled to the tertiary treatment of wastewater in semi-continuous photobioreactors. Tracking contaminants of emerging concern

  • Bellver, Marta
  • Díez-Montero, Rubén
  • Escolà Casas, Mònica
  • Matamoros, Víctor
  • Ferrer, Ivet
This study evaluated a tertiary wastewater treatment technology using cyanobacteria to recover value-added phycobiliproteins. The presence of contaminants of emerging concern (CECs) in wastewater, cyanobacterial biomass and pigments recovered were also analyzed. For this, a wastewater-borne cyanobacterium (Synechocystis sp. R2020) was used to treat secondary effluent from a municipal wastewater treatment plant, with and without nutrients supplementation. Then, the stability of phycobiliprotein production was assessed by operating the photobioreactor in semi-continuous mode. Results showed similar biomass productivity with and without nutrients supplementation (153.5 and 146.7 mg L-1 d-1, respectively). Upon semi-continuous operation, the phycobiliprotein content was stable and reached up to 74.7 mg gDW-1. The phycocyanin purity ratio ranged from 0.5 to 0.8, corresponding to food grade (>0.7). Out of 22 CECs detected in secondary effluent, only 3 were present in the phycobiliprotein extracts. In order to identify applications, prospective research should focus on CECs removal during pigment purification., This research was funded by the R + D + I projects AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32), funded by MCIN/AEI/ 10.13039/501100011033 and “ERDF A way of making Europe’’. Marta Bellver acknowledges her grant PRE2019-091552 funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”. Rubén Díez-Montero acknowledges his grant IJC2019-042069-I funded by MCIN/AEI/ 10.13039/501100011033. Mònica Escolà is grateful to the Beatriu de Pinós 2018 grant-programme (MSCA grant agreement number 801370)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Phycobiliprotein production from cyanobacteria treating wastewater: applications and key challenges

  • Bellver Catalá, Marta
  • Bürck, Monize
  • Cavalcante Braga, Anna Rafaela
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • Morais, Etiele Greque de|||0000-0003-2993-8572
Phycobiliproteins are high value natural pigments derived from cyanobacteria, with a wide range of biotechnological applications thanks to their color and bioactivity. Large-scale production in synthetic growth medium is associated with high costs and resource demand, including nutrient inputs, strict contamination control requirements, and energy consumption. Cultivating microalgae in wastewater offers a sustainable alternative by reducing freshwater and synthetic media consumption, while promoting resource recovery. This review aims to: (i) summarize current evidence on phycobiliprotein production in different wastewater sources, (ii) evaluate contaminant-related barriers that limit their potential use in food, cosmetic and pharmaceutical markets, and (iii) propose safe, high-value applications and valorization pathways. Indeed, despite the promising phycocyanin yield obtained in nutrient-rich wastewater (237 mg g-1 dry weight (DW)), the presence of contaminants (e.g., contaminants of emerging concern) may hinder some potential applications for these compounds. Therefore, potential uses should be based on the final product composition rather than the source of growth medium. Regulations should support this statement so as to promote the circular bioeconomy and clearly define safe uses for each product based on its composition. There are some industrial sectors where wastewater-derived pigments can add value (e.g., bio-paints, coatings, sustainable textiles), which may be integrated with cascade valorization of pigment-extracted biomass into other value-added products and bioenergy., This research was conducted in the framework of the R + D + I projects Cyan2Bio (PID2021-126564OB-C32) and Photobio+ (PID2024-156976OB-C21), funded by MCIU/AEI/10.13039/501100011033/FEDER, UE. Marta Bellver acknowledges her grant PRE2019-091552 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Etiele Morais would like to thank the Spanish Ministry of Industry and Economy for her research grant (RYC2022-038380-I). Anna Rafaela Cavalcante Braga acknowledges her grant 2023/00857-0 funded by Fundação de Amparo à Pesquisa do Estado de São Paulo., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Microalgae harvesting for wastewater treatment and resources recovery: a review

  • Morais, Etiele Greque de|||0000-0003-2993-8572
  • Carvalho Fontes Sampaio, Igor
  • González Flo, Eva|||0000-0001-6560-9018
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • Uggetti, Enrica|||0000-0001-6919-485X
  • García Serrano, Joan|||0000-0003-1258-8174
Microalgae-based wastewater treatment has been conceived to obtain reclaimed water and produce microalgal biomass for bio-based products and biofuels generation. However, microalgal biomass harvesting is challenging and expensive, hence one of the main bottlenecks for full-scale implementation. Finding an integrated approach that covers concepts of engineering, green chemistry and the application of microbial anabolism driven towards the harvesting processes, is mandatory for the widespread establishment of full-scale microalgae wastewater treatment plants. By using nature-based substances and applying concepts of chemical functionalization in already established harvesting methods, the costs of harvesting processes could be reduced while preventing microalgae biomass contamination. Moreover, microalgae produced during wastewater treatment have unique culture characteristics, such as the consortia, which are primarily composed of microalgae and bacteria, that should be accounted for prior to downstream processing. The aim of this review is to examine recent advances in microalgal biomass harvesting and recovery in wastewater treatment systems, considering the impact of consortia variability. The costs of available harvesting technologies, such as coagulation/flocculation, coupled to sedimentation and differential air flotation, are provided. Additionally, promising technologies are discussed, including autoflocculation, bioflocculation, new filtration materials, nanotechnology, microfluidic and magnetic methods., The authors would like to thank the support provided by two distinct projects: Cyan2Bio (funded by the Spanish Ministry of Science and Innovation (MCIN), the Research National Agency (AEI), and the European Regional Development Fund (FEDER) under the grant agreement PID2021-126564OB-C32) and PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733). The knowledge derived from these projects has been instrumental in enriching the depth of this article. Enrica Uggetti is grateful to the Spanish Ministry of Industry and Economy for her research grant (RYC2018-025514-I). Igor C.F. Sampaio is grateful to the Brazilian National Council for Scientific and Technological Development (CNPq) for the financial support and his postdoctoral scholarship (Call 26/2021). Eva Gonzalez-Flo is grateful to the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. Joan Garcia acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessment of polyhydroxybutyrate production by cyanobacteria Sstrains Isolated from environmental water sources using a secondary effluent

  • Lage Julia, Artai|||0009-0003-8994-8841
  • Berrendero Gómez, Ester
  • García Abad, Laura
  • Martínez Gutiérrez, Cristina
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
Growing concern over plastic pollution has intensified research on biodegradable alternatives, such as polyhydroxybutyrate (PHB), a biopolymer produced by cyanobacteria. Despite their sustainability advantages, photoautotrophic PHB production remains limited, and cultivation strategies need optimization. In this study, five cyanobacterial strains were isolated from environmental microbiome cultures to evaluate their PHB production potential. The goal was to identify the most productive strains and optimal conditions for polymer synthesis. Cultures were grown in modified BG11 media (without nitrogen, phosphorus, or inorganic carbon) and in a secondary effluent from treated urban wastewater, both supplemented with acetate (0, 0.6, or 4 g/L) and incubated for 7 days in darkness. The biomass remained stable in most strains but declined to 0.28 g/L in the secondary effluent, except for one Leptolyngbya sp. strain that increased the biomass with acetate. The highest PHB yield per acetate consumed was achieved by Synechocystis sp. from an agricultural pond, reaching 3.1% dry cell weight in modified BG11 with 0.6 g/L acetate. In the secondary effluent, the maximum PHB content reached 2.9% in another Leptolyngbya sp. strain with 4 g/L acetate. These findings highlight strain-specific responses and the potential of wastewater-based cultivation for sustainable bioplastic production., Authors acknowledge the CYAN2BIO project (subprojects PID2021-126564OB-C32 and PID2021-126564OB-C33), funded by the Spanish Programa Estatal de I+D+i, Ministerio de Ciencia, Innovación y Universidades (MICIU/AEI/ 10.13039/501100011033) and by ERDF/EU. A.L. thanks the Agency for Management of University and Research (AGAUR) for his grant [FIAGAUR_2021]. E.G.F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Recovery of bio-based products and bioenergy from microalgae in the framework of a circular bioeconomy

  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • Bellver Catalá, Marta
  • Ruales Dávila, Evelyn
  • Passos, Fabiana Lopes del Rei|||0000-0001-7501-988X
  • Garfi, Marianna|||0000-0001-9234-5580
This presentation will provide an overview on role of anaerobic digestion in microalgae biorefineries intended to recover value-added bio-based products and bioenergy from waste streams. Firstly, the results of several research studies conducted at bench and pilot-scale microalgae biorefineries treating industrial and urban wastewater will be summarised. Then, the sustainability of these processes according to environmental and social life cycle assessments will be presented. As will be seen, value-added products as natural pigments (phycobiliproteins and carotenoids) could be recovered along with biogas from extracted biomass, providing economic and environmental benefits. However, there are still social barriers to be tackled by means of education and regulation to enhance social acceptance and steer the implementation of a circular bioeconomy., This research has received funding from MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe’’ under the projects AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32). M. Bellver acknowledges her grant PRE2019-091552 funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future”. E. Ruales acknowledges her grant 2020 FISDUR 00592 funded by AGAUR (Generalitat de Catalunya).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Carotenoids and biogas recovery from microalgae treating wastewater

  • Ruales Dávila, Evelyn
  • Bellver Catalá, Marta
  • Álvarez González, Ana
  • Carvalho Fontes Sampaio, Igor
  • Garfi, Marianna|||0000-0001-9234-5580
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
This study evaluated the potential of microalgal biomass grown in wastewater for carotenoid and biogas recovery in a biorefinery approach. Microalgal biomass was harvested from two pilot high rate algal ponds treating urban wastewater with hydraulic retention times (HRTs) of 8 and 6 days. The maximum carotenoid content in harvested biomass was 4 mg·g total suspended solids (TSS)-1 with a HRT of 8 days, while it reached around 1.5–2 mg·gTSS-1 with a HRT of 6 days. Biochemical methane potential tests showed no significant differences between the methane yield of raw (159 NmLCH4·gVS-1) and carotenoid-extracted biomass (136 NmLCH4·gVS-1). Moreover, co-digestion of raw and carotenoid-extracted biomass with primary sludge increased the methane yield by 58 % and 86 %, respectively (75:25 ratio), and by 28 % and 44 %, respectively (50:50 ratio). These results demonstrate that wastewater-grown microalgae biorefineries enable the simultaneous recovery of value-added carotenoids and bioenergy, in the framework of a circular bioeconomy., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integrated microalgal biorefinery for carotenoids and bioenergy recovery

  • Ruales Dávila, Evelyn
  • Bellver Catalá, Marta
  • Álvarez González, Ana
  • Garfi, Marianna|||0000-0001-9234-5580
  • Sampaio, Igor
  • Passos, Fabiana Lopes del Rei|||0000-0001-7501-988X
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
This study aimed to evaluate the potential of microalgae grown in wastewater to recover carotenoids and biogas in a biorefinery approach. To this end, two pilot raceway ponds treating real wastewater were operated with a hydraulic retention time (HRT) of 8 and 6 days. The maximum total carotenoid content in harvested biomass was 4.3 mg·gDW-1 with a HRT of 8 days, while it stabilized at 1.5–2.2 mg·gDW-1 with a HRT of 6 days. Biochemical methane potential tests were then run to quantify the biogas production from carotenoid-extracted biomass (136.3 mLCH4·gVS-1), which corresponded to 86% of the methane yield achievable from raw microalgal biomass. Co-digestion with primary sludge increased the methane yield production both for raw and carotenoid-extracted biomass by 58 and 86%, respectively, when a 75:25 ratio was employed and by 28 and 44%, respectively, when a 50:50 ratio (VS basis) was used. This approach is promising for recovering resources (bio-based products and bioenergy) in the framework of a circular bioeconomy., This research has received funding from MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe’’ under the projects AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32). E. Ruales acknowledges her grant 2020 FISDUR 00592 funded by AGAUR (Generalitat de Catalunya). M. Bellver acknowledges her grant PRE2019-091552 funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future”.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Microalgae cell wall hydrolysis using snailase and mechanical sand milling

  • Carvalho Fontes Sampaio, Igor
  • Chahud Maestrello, Chadia
  • Lopes de Moura, Isabela Viana
  • Estevam, Renata
  • Morais, Etiele Greque de|||0000-0003-2993-8572
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • Pinto de Oliveira, Jairo
  • Alves Cassini, Servio Tulio
The extraction of intracellular constituents from recalcitrant microalgae strains stands as a significant challenge and a crucial bottleneck in microalgae processing. This study presents a novel enzymatic approach coupling mechanical lysis through sand milling without commercial glass or zirconium beads, with subsequent snailase treatment, resulting in improved cell wall breakdown and increased release of valuable constituents. The selected microalga was Chlorella sp. L06, renowned for its sturdy cell wall structure. Initial experiments involving sand milling unveiled substantial release of proteins (1.19 mg/mL) and chlorophyll (1.80 of absorbance at 680 nm), underscoring effective cell disruption. Remarkably, the application of snailase after sand milling produced noteworthy outcomes, fostering enhanced cell wall degradation and liberating a spectrum of constituents, encompassing soluble reducing sugars (1.13 mg/mL), proteins (2.28 mg/mL), and chlorophyll (2.83 of absorbance at 680 nm). The process was optimized by applying the Box-Behnken design, which revealed distinct operational parameters that significantly improved the release of soluble sugars and proteins by 46 % and 12.7 %, respectively. Moreover, the presence of snailase also showcased a protective antioxidant effect on chlorophyll during the hydrolysis, shedding light on its multifaceted role in the hydrolysis process. This study introduces an advantageous strategy for efficiently valorizing microalgae biomass using the synergistic potential of mechanical lysis and enzymatic treatment. Furthermore, the developed method contributes achieving promising, sustainable microalgae-based biorefineries., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Resource recovery and contaminants of emerging concern mitigation by microalgae treating wastewater

  • Ruales Dávila, Evelyn
  • Gómez, Cintia
  • Morillas España, Ainoa
  • González López, Cynthia Victoria
  • Escolà Casas, Mònica
  • Matamoros, Victor
  • Garfi, Marianna|||0000-0001-9234-5580
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
This study aimed to investigate the recovery of agricultural biostimulants and biogas from microalgae treating wastewater, in the framework of a circular bioeconomy. To this end, municipal wastewater was treated in demonstrative raceway ponds, and microalgal biomass (Scenedesmus sp.) was then harvested and downstream processed to recover biostimulants and biogas in a biorefinery approach. The effect of microalgal biostimulants on plants was evaluated by means of bioassays, while the biogas produced was quantified in biochemical methane potential (BMP) tests. Furthermore, the fate of contaminants of emerging concern (CECs) over the process was also assessed. Bioassays confirmed the biostimulant effect of microalgae, which showed gibberellin-, auxin- and cytokinin-like activity in watercress seed germination, mung bean rooting, and wheat leaf chlorophyll retention. In addition, the downstream process applied to raw biomass acted as a pre-treatment to enhance anaerobic digestion performance. After biostimulant extraction, the residual biomass represented 91% of the methane yield from the raw biomass (276 mLCH4·g-1VS). The kinetic profile of the residual biomass was 43% higher than that of the unprocessed biomass. Co-digestion with primary sludge further increased biogas production by 24%. Finally, the concentration of CECs in wastewater was reduced by more than 80%, and only 6 out of 22 CECs analyzed were present in the biostimulant obtained. Most importantly, the concentration of those contaminants was lower than in biosolids that are commonly used in agriculture, ensuring environmental safety., This research was funded by the AL4BIO project “RTI2018-099495-B-C21 and RTI2018-099495-A-C22”, and Cyan2Bio project “PID2021-126564OB-C31 and PID2021-126564OB-C32” (MCIU/AEI/FEDER, EU). E. Ruales acknowledges her PhD scholarship from AGAUR – Generalitat de Catalunya (FI SDUR-2020-00592)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Putative functional redundancy in cyanobacterial microbiomes allows stable bioplastic production despite shifts in dominant populations

  • Lage Julia, Artai|||0009-0003-8994-8841
  • Heintze, Quim
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
This study investigates whether a single initial cyanobacterial microbiome, originating from a mixed community, retains its capacity for polyhydroxybutyrate (PHB) production under non-sterile long-term operation when subjected to cultivation conditions that promote different dominant cyanobacterial populations. Distinct selective pressures were applied in two photobioreactors: one subjected to high pH (>10) and nutrient limitation, which favored the dominance of Synechococcus sp., and one operating under controlled pH (8.0–8.25) and sufficient nutrient supplementation, which promoted the enrichment of Synechocystis sp. Despite these shifts in cyanobacterial population dominance, the microbiome retained the capacity to accumulate PHB over 31days, indicating functional stability and potential functional redundancy within mixed cyanobacterial consortia. Differences in productivity between photobioreactors, with the Synechocystis sp.-dominated culture achieving a maximum PHB content of 36%dcw compared to 17%dcw in the Synechococcus sp.-dominated culture, were more likely associated with the distinct operational conditions imposed rather than with the dominant cyanobacterial population, though the contribution of population composition cannot be fully excluded. Daily acetate addition (100mg·L-1) proved to be an effective supplementation strategy for sustaining PHB accumulation in both systems. These findings suggest that bioplastic production can be maintained despite changes in cyanobacterial population dominance within a shared microbiome, consistent with putative functional redundancy, and that operational parameters may be more decisive than species dominance in determining PHB productivity., This research has received funding from the Spanish Programa Estatal de I+D+I Ministerio de Ciencia, Innovaci´on y Universidades under grant agreements No. PID2021-126564OB547-C32 and EUR2024-153544. A.L.J. thanks the Agency for Management of University and Research (AGAUR) for his grant [FIAGAUR_2021]. J.G. knowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Challenges, progress, and future perspectives for cyanobacterial polyhydroxyalkanoate production

  • Rueda Hernández, Estel|||0000-0001-8681-3915
  • González Flo, Eva|||0000-0001-6560-9018
  • Mondal, Soumila
  • Forchhammer, Karl
  • Arias Lizárraga, Dulce María
  • Ludwig, Katharina
  • Drosg, Bernhard
  • Fritz, Ines
  • Gonzalez Esquer, Cesar Raul
  • Pacheco, Sara
  • García Serrano, Joan|||0000-0003-1258-8174
Polyhydroxyalkanoates (PHA) are a promising bio-based alternative to traditional plastics derived from petroleum. Cyanobacteria are photosynthetic organisms that produce PHA from CO<jats:sub>2</jats:sub> and sunlight, which can potentially reduce production costs and environmental footprint in comparison to heterotrophic bacteria cultures because (1) they utilize inorganic carbon sources for growth and (2) they do not require intensive aeration for oxygenation. Moreover, supplementing precursors such as propionate, acetate, valerate, etc., can be used to obtain various copolymers with plastic customizable properties in comparison to the classical homopolymers, such as polyhydroxybutyrate, PHB. This critical review covers the latest advances in PHA production, including recent discoveries in the metabolism interplay between PHA and glycogen production, and new insights into cultivation strategies that enhance PHA accumulation, and purification processes. This review also addresses the challenges and suggests potential solutions for a viable industrial PHAs production process., The authors would like to acknowledge PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733), AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32), the last two funded by the Spanish "Ministerio de Ciencia e Innovación", the Spanish "Agencia Estatal de Investigación", and “ERDF A way of making Europe”. The knowledge derived from these projects has been instrumental in enriching the depth of this article. Estel Rueda wants to thank the Spanish Ministry of Education, Culture, and Sport [FPU18/04941]. Eva Gonzalez-Flo would like to thank the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS12]. Karl Forchhammer wants to acknowledge the Deutsche Forschungsgemeinschaft grant [DFG Fo195/23-1] and Korea Evaluation Institute of Industrial Technology (KEIT) grant funded by the Korean government (MOTIE) [No. RS-2022-00155902]. J. García acknowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling challenges to unlock the power of phototrophic systems for wastewater valorization

  • Casagli, Francesca
  • Turolla, Andrea
  • Batstone, D.J.
  • Capson Tojo, Gabriel
  • Ficara, Elena
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
  • Laurent, Julien
  • Lorenz, Tatjana
  • Pierrelée, Michaël
  • Plósz, Benedek Gy.
  • Ribero da Silva, Gustavo Henrique
  • Robles, Angel
  • Rossi, Simone
  • Rueda Hernández, Estel|||0000-0001-8681-3915
  • Stegemüller, Lars
  • Steyer, Jean Phillipe
  • Bernard, Olivier
  • Valverde Pérez, Borja
Phototrophic microorganisms are gaining prominence for their dual role in wastewater treatment and resource recovery, converting wastewater into valuable bioproducts. However, their effective deployment needs robust modelling frameworks capable of predicting performance across complex, real-world scenarios. Despite significant advances, key challenges hinder the development and application of such models: ¿ Biological complexity: phototrophic systems involve intricate processes (e.g., photosynthesis, nutrient uptake, microbial interactions, and predation) that are difficult to represent accurately due to their dynamic interdependencies. ¿ Environmental variability: permanent fluctuations in light, temperature, pH, and toxic compounds in outdoor reactors require high-resolution dynamic data for reliable model calibration and prediction. ¿ Data limitations: lack of comprehensive, high-quality datasets (e.g., biological, environmental, and operational conditions) constrains model development, particularly for data-driven approaches. ¿ Multi-scale integration: bridging molecular, cellular, and ecosystem-level processes into a unified modelling framework, including physics, remains a significant hurdle. ¿ Parameter and uncertainty management: models often suffer from non-identifiable parameters, sensitivity to approximations, and insufficient validation against long-term experimental data. ¿ Balancing complexity and applicability: selecting the appropriate level of ecological and mathematical details, tailored to specific applications (e.g., biomass production and nutrient removal) and data availability is critical yet challenging. ¿ Computational and interdisciplinary barriers: high computational costs, especially for hybrid and data-driven models, alongside the need for cross-disciplinary collaboration, further complicate model development. ¿ To overcome these barriers, this work argues for standardized protocols in model design, calibration and validation, alongside enhanced data collection and reconciliation efforts. Integrating innovative approaches, such as metabolic modelling, machine learning and hybrid modelling into digital twins, will be essential to unlock the full potential of phototrophic systems, bridging the gap between theoretical models and industrial implementation., Concerning the contribution of Universitat Politécnica de Catalunya ⋅ BarcelonaTech, this publication is part of the R&D&I project PID2021- 126564OB-C32 (Cyan2Bio), funded by MICIU/AEI/10.13039/ 501100011033 and by ERDF/EU. JG would like to acknowledge the support provided by the ICREA Academia program. GR would like to acknowledge the Brasilian National Council for Scientific and Technological Development (CNPq process 308663/2021-7). EGF would like to thank the European Union-NextGenerationEU, Spanish Ministry of Science, Innovation and Universities, and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. FC and OB are grateful to the support of the ANR Barrier project (ANR-22-CE34-0021). BVP acknowledges the financial support provided by the Danish Research Council for Independent Research under the Sapere Aude DFF Starting Grant 10.46540/2067–00029B., Peer Reviewed, Article signat per xx autors/es: Francesca Casagli a, Andrea Turolla b,*, Damien J. Batstone c, Gabriel Capson-Tojo d, Elena Ficara b, Joan García e, Eva Gonzalez-Flo f, Julien Laurent g, Tatjana Lorenz h, Michaël Pierrelée i, Benedek Gy. Plósz j,n, Gustavo Henrique Ribero Da Silva k, Ángel Robles l, Simone Rossi b,o, Estel Rueda e, Lars Stegemüller m, Jean-Philippe Steyer d, Olivier Bernard a, Borja Valverde-Pérez i a Centre INRIA d’Universit´e Cˆote d’Azur, GreenOwl team, Sophia-Antipolis 06902, France b Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy c Australian Centre for Water and Environmental Biotechnology, The University of Queensland, Brisbane 4072, QLD, Australia d INRAE, Univ Montpellier, LBE, 102 Avenue des ´Etangs, Narbonne 11100, France e GEMMA - Group of Environmental Engineering and Microbiology, Department of Civil and Environmental Engineering, Universitat Polit`ecnica de Catalunya BarcelonaTech, c/ Jordi Girona 1-3, Building D1, E-08034 Barcelona, Spain f GEMMA - Group of Environmental Engineering and Microbiology, Department of Civil and Environmental Engineering, Escola d’Enginyeria de Barcelona Est (EEBE), Universitat Polit`ecnica de Catalunya⋅BarcelonaTech, Av. Eduard Maristany 16, Building C5.1, E-08019 Barcelona, Spain g Universit´e de Strasbourg, ENGEES, CNRS, ICube UMR 7357, F-67000 Strasbourg, France h Department of Architecture and Civil Engineering, ZEuUS - Competence Centre for Sustainable Engineering and Environmental Systems, THM - University of Applied Sciences, Wiesenstr. 14, 35390 Giessen, Germany i Department of Environmental and Resource Engineering, Technical University of Denmark, Bygningstorvet, Bygning 115, 2800 Kgs, Lyngby, Denmark j Department of Chemical Engineering, University of Bath, Claverton Down, Bath BA2 7AY, UK k Department of Civil and Environmental Engineering, School of Engineering, S˜ao Paulo State University (UNESP), Bauru, SP, Brazil l Departament d’Enginyeria Química, ETSE-UV, Universitat de Val`encia, Avinguda de la Universitat s/n, Valencia, Burjassot 46100, Spain m Department of Chemical Engineering, Technical University of Denmark, DTU, Søltofts Plads 228A, Lyngby 2800, Denmark n SWING – Department of Built Environment, Oslo Metropolitan University, Postboks 4 St Olavs Plass, 0130 Oslo, Norway o Energy Technologies and Processes Research Group, Generation Technologies and Materials Department, Ricerca sul Sistema Energetico - RSE S.p.A., v. Rubattino 54, 20134 Milano, Italy, 6 - Aigua Neta i Sanejament
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Application of selenium-enriched biomass from a microalgal consortium cultivated in domestic wastewater as a biofertilizer: effect of selenium supplementation

  • Murillo, Ana M.
  • Kotamraju, Amulya
  • Lens, Piet N. L.
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • Uggetti, Enrica|||0000-0001-6919-485X
  • Morais, Etiele Greque de|||0000-0003-2993-8572
Microalgae offer a sustainable and versatile solution for addressing both environmental pollution and micronutrient deficiencies, such as selenium (Se) scarcity. By coupling wastewater treatment with microalgae cultivation, it is possible to recover resources with minimal energy input while producing selenium-enriched biomass suitable for high-value applications in agriculture and animal nutrition. The objective of this study was to use microalgae derived from remediating Se laden wastewaters as a potential Se-rich resource to enrich crops with Se to secure its adequate supply in Se deficient regions. The microalgae were grown on urban wastewater enriched with 500 µg/L Se (IV) and showed Se accumulation of 42.4 mg/kg biomass and an average Se(IV) removal efficiency of 48 %. The Se enriched microalgae were tested at different concentrations (0–100 mg/L) on soil for the cultivation of the Asiatic leaf vegetable pak choi. Plant growth parameters like the leaf number, root length and shoot height, fresh and dry weight were evaluated. Se-enriched biomass increased pak choi shoot and root lengths to 20 cm and 30 cm, respectively. This suggests that microalgae cultivated in the presence of wastewater containing Se can serve as a biofertilizer to enhance the growth and Se content of a plant, thus offering dual benefits of Se rich wastewater remediation and use of microalgae enriched with Se as biofertilizer for biofortification of food crops in regions that are deficient in Se., This publication has emanated from research supported by Science Foundation Ireland (SFI) through the SFI Research Professorship Programme entitled Innovative Energy Technologies for Biofuels, Bioenergy and a Sustainable Irish Bioeconomy (IETSBIO3; grant number 15/RP/ 2763), the Research Infrastructure research grant Platform for Biofuel Analysis (Grant Number 16/RI/3401), the Department of Foreign Affairs (DFA) under the SDG challenge project Floating Treatment Wetland, supporting teams to develop solutions addressing challenges under UN SDG3: Good Health and Well-being (grant No SFI/21/FIP/SDG/9933), the Spanish Ministry of Industry and Economy (research grant RYC2022-038380-I), and the Spanish Ministry of Science, Innovation and Universities through the Cyan2Bio project (PID2021-126564OB- C32), funded by MICIU/AEI/ 10.13039/501100011033 and “ERDF A way of making Europe’’., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-throughput screening of cyanobacterial PHB production using fluorescence-based detection

  • Lage Julia, Artai|||0009-0003-8994-8841
  • Altamira Algarra, Beatriz
  • García Serrano, Joan|||0000-0003-1258-8174
  • González Flo, Eva|||0000-0001-6560-9018
Three different cultures of cyanobacteria: Synechocystis sp., Leptolyngbya sp., and a co- culture of both Synechocystis sp. and Synechococcus sp. were tested for their polyhydroxybutyrate (PHB) production potential under diverse conditions. High- throughput screening in a multi- well plate, using Nile blue fluorescence to estimate PHB accumulation, enabled simultaneous testing of multiple parameters without complex setups and faster PHB estimation compared to conventional gas chromatography. Fluorescence results indicated that the best conditions for PHB accumulation were nitrogen depletion under darkness at 30°C with acetate supplementation after 4 days of glycogen accumulation. Finally, these optimal conditions were validated in single- batch proof- of- concept photobioreactors (1 L working volume). The scale- up proved successful, yielding 7% PHB dry cell weight (dcw) for Synechocystis sp. and a promising 13% PHB dcw for Leptolyngbya sp. In addition, scale- up experiments in 1- L photobi - oreactors demonstrated that a dedicated glycogen pre- accumulation step is unnecessary, as PHB can be efficiently synthesized directly from acetate, This research has received funding from the Spanish Programa Estatal de I+D+i. Ministerio de Ciencia, Innovación y Universidades under grant agreements No. PID2021-126564OB- C32 and EUR2024-153544. A.L.J. thanks the Agency for Management of University and Research (AGAUR) for his grant [FIAGAUR_2021]. E.G.-F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS- 12]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Scalable two-stage recovery of C-phycocyanin from Synechocystis salina via tangential ultrafiltration for sustainable textile dyeing

  • Bermejo Román, Ruperto
  • Hurtado, María del Carmen
  • Garrido Romero, Javier
  • Gómez Serrano, Cintia
  • González López, Cynthia Victoria
  • Acién Fernández, Francisco Gabriel
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
C-phycocyanin (C-PC) is a high-value phycobiliprotein extensively used as a natural blue colourant, whose commercial deployment is primarily constrained by downstream purity, stability, and scalability. In this work, a simple, robust, and scalable two-stage process is developed for the recovery of C-PC from Synechocystis salina, combining mild clarification by osmotic shock with tangential-flow ultrafiltration. Phosphate-buffer extraction (0.1 M, pH 7.0) enabled the recovery of 85% of the intracellular C-PC, albeit with low initial purity (A615/A280 < 0.38). Subsequent ultrafiltration using membranes with molecular weight cut-offs (MWCO) of 10, 50, and 100 kDa allowed simultaneous concentration and purification. The 100 kDa membrane showed the best overall performance, achieving a purity ratio of 1.09, C-PC recovery of 92%, a global yield of 78.1%, and a final concentration of 1.01 mg·mL-1 (14-fold concentration), while maintaining stable permeate flux and low filtration resistance, indicative of favourable scale-up potential. To overcome the intrinsic instability of C-PC, the effect of food-grade stabilizing additives (2.5 mM) was assessed, extending shelf life at 25 °C from 77 days (no additive) to 127 and 208 days with benzoic and citric acid, respectively. Finally, the purified and stabilized C-PC extracts were successfully applied as natural dyes on different textile materials (cotton, cotton/viscose-rayon/polyester, and cotton/polyester) using conventional mordants, yielding homogeneous colouration with acceptable colour stability. Overall, this integrated clarification–ultrafiltration and stabilization strategy provides an industrially viable route for producing commercial-grade C-PC with enhanced shelf life, enabling its use in food formulations and sustainable textile dyeing., This research was performed within ALGAHUB (TED2021-131555B- C21) project funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and the European Union Next GenerationEU/PRTR; Cyan2Bio (PID2021-126564OB-C31, PID2021- 126564OB-C32); Photobio+(PID2024-156976OB-C21, PID2024- 156976OB-C22) and SOLARFOODS (PID2022136292OB-I00) projects funded by MICIU/AEI /10.13039/501100011033 and by FED-ER, EU. The study was supported by the Circular Bio-based Europe Joint dertaking and its member, and co-funded by the EU (Grant No. 101214199)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Carotenoids and biogas recovery from microalgae treating wastewater

  • Ruales Dávila, Evelyn
  • Bellver Catalá, Marta
  • Álvarez González, Ana
  • Carvalho Fontes Sampaio, Igor
  • Garfi, Marianna
  • Ferrer Martí, Ivet
This study evaluated the potential of microalgal biomass grown in wastewater for carotenoid and biogas recovery in a biorefinery approach. Microalgal biomass was harvested from two pilot high rate algal ponds treating urban wastewater with hydraulic retention times (HRTs) of 8 and 6 days. The maximum carotenoid content in harvested biomass was 4 mg·g total suspended solids (TSS)-1 with a HRT of 8 days, while it reached around 1.5–2 mg·gTSS-1 with a HRT of 6 days. Biochemical methane potential tests showed no significant differences between the methane yield of raw (159 NmLCH4·gVS-1) and carotenoid-extracted biomass (136 NmLCH4·gVS-1). Moreover, co-digestion of raw and carotenoid-extracted biomass with primary sludge increased the methane yield by 58 % and 86 %, respectively (75:25 ratio), and by 28 % and 44 %, respectively (50:50 ratio). These results demonstrate that wastewater-grown microalgae biorefineries enable the simultaneous recovery of value-added carotenoids and bioenergy, in the framework of a circular bioeconomy., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Challenges, progress, and future perspectives for cyanobacterial polyhydroxyalkanoate production

  • Rueda Hernández, Estel
  • González Flo, Eva
  • Mondal, Soumila
  • Forchhammer, Karl
  • Arias Lizárraga, Dulce María
  • Ludwig, Katharina
  • Drosg, Bernhard
  • Fritz, Ines
  • Gonzalez Esquer, Cesar Raul
  • Pacheco, Sara
  • García Serrano, Joan
Polyhydroxyalkanoates (PHA) are a promising bio-based alternative to traditional plastics derived from petroleum. Cyanobacteria are photosynthetic organisms that produce PHA from CO<jats:sub>2</jats:sub> and sunlight, which can potentially reduce production costs and environmental footprint in comparison to heterotrophic bacteria cultures because (1) they utilize inorganic carbon sources for growth and (2) they do not require intensive aeration for oxygenation. Moreover, supplementing precursors such as propionate, acetate, valerate, etc., can be used to obtain various copolymers with plastic customizable properties in comparison to the classical homopolymers, such as polyhydroxybutyrate, PHB. This critical review covers the latest advances in PHA production, including recent discoveries in the metabolism interplay between PHA and glycogen production, and new insights into cultivation strategies that enhance PHA accumulation, and purification processes. This review also addresses the challenges and suggests potential solutions for a viable industrial PHAs production process., The authors would like to acknowledge PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733), AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32), the last two funded by the Spanish "Ministerio de Ciencia e Innovación", the Spanish "Agencia Estatal de Investigación", and “ERDF A way of making Europe”. The knowledge derived from these projects has been instrumental in enriching the depth of this article. Estel Rueda wants to thank the Spanish Ministry of Education, Culture, and Sport [FPU18/04941]. Eva Gonzalez-Flo would like to thank the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS12]. Karl Forchhammer wants to acknowledge the Deutsche Forschungsgemeinschaft grant [DFG Fo195/23-1] and Korea Evaluation Institute of Industrial Technology (KEIT) grant funded by the Korean government (MOTIE) [No. RS-2022-00155902]. J. García acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Phycobiliprotein production from cyanobacteria treating wastewater: applications and key challenges

  • Bellver Catalá, Marta
  • Bürck, Monize
  • Cavalcante Braga, Anna Rafaela
  • Ferrer Martí, Ivet
  • Morais, Etiele Greque de
Phycobiliproteins are high value natural pigments derived from cyanobacteria, with a wide range of biotechnological applications thanks to their color and bioactivity. Large-scale production in synthetic growth medium is associated with high costs and resource demand, including nutrient inputs, strict contamination control requirements, and energy consumption. Cultivating microalgae in wastewater offers a sustainable alternative by reducing freshwater and synthetic media consumption, while promoting resource recovery. This review aims to: (i) summarize current evidence on phycobiliprotein production in different wastewater sources, (ii) evaluate contaminant-related barriers that limit their potential use in food, cosmetic and pharmaceutical markets, and (iii) propose safe, high-value applications and valorization pathways. Indeed, despite the promising phycocyanin yield obtained in nutrient-rich wastewater (237 mg g-1 dry weight (DW)), the presence of contaminants (e.g., contaminants of emerging concern) may hinder some potential applications for these compounds. Therefore, potential uses should be based on the final product composition rather than the source of growth medium. Regulations should support this statement so as to promote the circular bioeconomy and clearly define safe uses for each product based on its composition. There are some industrial sectors where wastewater-derived pigments can add value (e.g., bio-paints, coatings, sustainable textiles), which may be integrated with cascade valorization of pigment-extracted biomass into other value-added products and bioenergy., This research was conducted in the framework of the R + D + I projects Cyan2Bio (PID2021-126564OB-C32) and Photobio+ (PID2024-156976OB-C21), funded by MCIU/AEI/10.13039/501100011033/FEDER, UE. Marta Bellver acknowledges her grant PRE2019-091552 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Etiele Morais would like to thank the Spanish Ministry of Industry and Economy for her research grant (RYC2022-038380-I). Anna Rafaela Cavalcante Braga acknowledges her grant 2023/00857-0 funded by Fundação de Amparo à Pesquisa do Estado de São Paulo., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of polyhydroxybutyrate production by cyanobacteria Sstrains Isolated from environmental water sources using a secondary effluent

  • Lage Julia, Artai
  • Berrendero Gómez, Ester
  • García Abad, Laura
  • Martínez Gutiérrez, Cristina
  • García Serrano, Joan
  • González Flo, Eva
Growing concern over plastic pollution has intensified research on biodegradable alternatives, such as polyhydroxybutyrate (PHB), a biopolymer produced by cyanobacteria. Despite their sustainability advantages, photoautotrophic PHB production remains limited, and cultivation strategies need optimization. In this study, five cyanobacterial strains were isolated from environmental microbiome cultures to evaluate their PHB production potential. The goal was to identify the most productive strains and optimal conditions for polymer synthesis. Cultures were grown in modified BG11 media (without nitrogen, phosphorus, or inorganic carbon) and in a secondary effluent from treated urban wastewater, both supplemented with acetate (0, 0.6, or 4 g/L) and incubated for 7 days in darkness. The biomass remained stable in most strains but declined to 0.28 g/L in the secondary effluent, except for one Leptolyngbya sp. strain that increased the biomass with acetate. The highest PHB yield per acetate consumed was achieved by Synechocystis sp. from an agricultural pond, reaching 3.1% dry cell weight in modified BG11 with 0.6 g/L acetate. In the secondary effluent, the maximum PHB content reached 2.9% in another Leptolyngbya sp. strain with 4 g/L acetate. These findings highlight strain-specific responses and the potential of wastewater-based cultivation for sustainable bioplastic production., Authors acknowledge the CYAN2BIO project (subprojects PID2021-126564OB-C32 and PID2021-126564OB-C33), funded by the Spanish Programa Estatal de I+D+i, Ministerio de Ciencia, Innovación y Universidades (MICIU/AEI/ 10.13039/501100011033) and by ERDF/EU. A.L. thanks the Agency for Management of University and Research (AGAUR) for his grant [FIAGAUR_2021]. E.G.F. would like to thank the European Union-NextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. J.G. acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Social life cycle assessment of microalgae-based systems for wastewater treatment and resource recovery

  • Josa i Culleré, Irene
  • Garfi, Marianna
The aim of this study was to assess the social impacts of microalgae-based systems for wastewater treatment and bioproducts recovery by using the Social Life Cycle Assessment (S-LCA) tool. In particular, two systems were analysed: 1) a system treating urban wastewater, and 2) another system treating wastewater from the food industry. Moreover, these alternatives were compared to 3) a system for bioproducts production from microalgae grown in a standard growth medium. The recovered bioproducts in all the systems considered were: natural pigments, biogas and digestate, which can be reused as biofertilizer. Results showed that the scenario using standard growth medium was the one showing the best results in all impacts and stakeholder categories (up to 24-fold lower impacts depending on the impact category). This was mainly due to: i) the simplicity of the system, which consequently improves health and safety for workers; ii) the absence of contaminants which consequently improves health and safety, acceptability and olfactory impact for both consumers and the local community; iii) the presence of well-established legislation, regulatory frameworks, and full-scale deployment, which benefit value chain actors and society. Overall, this study also identified several social factors hindering a transition towards a circular bioeconomy in the microalgae-based systems for the wastewater treatment and resource recovery sector., Authors acknowledge the AL4BIO project (RTI2018-099495-B-C21) (MCIU/AEI/FEDER, UE) and the CYAN2BIO project (PID2021-126564OB-C32). The authors are grateful to the Government of Catalonia (Consolidated Research Group 2017 SGR 1029). Marianna Garfí is grateful to the MINECO (RYC-2016-20059)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Recovery of bio-based products and bioenergy from microalgae in the framework of a circular bioeconomy

  • Ferrer Martí, Ivet
  • Bellver Catalá, Marta
  • Ruales Dávila, Evelyn
  • Passos, Fabiana Lopes del Rei
  • Garfi, Marianna
This presentation will provide an overview on role of anaerobic digestion in microalgae biorefineries intended to recover value-added bio-based products and bioenergy from waste streams. Firstly, the results of several research studies conducted at bench and pilot-scale microalgae biorefineries treating industrial and urban wastewater will be summarised. Then, the sustainability of these processes according to environmental and social life cycle assessments will be presented. As will be seen, value-added products as natural pigments (phycobiliproteins and carotenoids) could be recovered along with biogas from extracted biomass, providing economic and environmental benefits. However, there are still social barriers to be tackled by means of education and regulation to enhance social acceptance and steer the implementation of a circular bioeconomy., This research has received funding from MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe’’ under the projects AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32). M. Bellver acknowledges her grant PRE2019-091552 funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future”. E. Ruales acknowledges her grant 2020 FISDUR 00592 funded by AGAUR (Generalitat de Catalunya)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Application of selenium-enriched biomass from a microalgal consortium cultivated in domestic wastewater as a biofertilizer: effect of selenium supplementation

  • Murillo, Ana M.
  • Kotamraju, Amulya
  • Lens, Piet N. L.
  • Ferrer Martí, Ivet
  • Uggetti, Enrica
  • Morais, Etiele Greque de
Microalgae offer a sustainable and versatile solution for addressing both environmental pollution and micronutrient deficiencies, such as selenium (Se) scarcity. By coupling wastewater treatment with microalgae cultivation, it is possible to recover resources with minimal energy input while producing selenium-enriched biomass suitable for high-value applications in agriculture and animal nutrition. The objective of this study was to use microalgae derived from remediating Se laden wastewaters as a potential Se-rich resource to enrich crops with Se to secure its adequate supply in Se deficient regions. The microalgae were grown on urban wastewater enriched with 500 µg/L Se (IV) and showed Se accumulation of 42.4 mg/kg biomass and an average Se(IV) removal efficiency of 48 %. The Se enriched microalgae were tested at different concentrations (0–100 mg/L) on soil for the cultivation of the Asiatic leaf vegetable pak choi. Plant growth parameters like the leaf number, root length and shoot height, fresh and dry weight were evaluated. Se-enriched biomass increased pak choi shoot and root lengths to 20 cm and 30 cm, respectively. This suggests that microalgae cultivated in the presence of wastewater containing Se can serve as a biofertilizer to enhance the growth and Se content of a plant, thus offering dual benefits of Se rich wastewater remediation and use of microalgae enriched with Se as biofertilizer for biofortification of food crops in regions that are deficient in Se., This publication has emanated from research supported by Science Foundation Ireland (SFI) through the SFI Research Professorship Programme entitled Innovative Energy Technologies for Biofuels, Bioenergy and a Sustainable Irish Bioeconomy (IETSBIO3; grant number 15/RP/ 2763), the Research Infrastructure research grant Platform for Biofuel Analysis (Grant Number 16/RI/3401), the Department of Foreign Affairs (DFA) under the SDG challenge project Floating Treatment Wetland, supporting teams to develop solutions addressing challenges under UN SDG3: Good Health and Well-being (grant No SFI/21/FIP/SDG/9933), the Spanish Ministry of Industry and Economy (research grant RYC2022-038380-I), and the Spanish Ministry of Science, Innovation and Universities through the Cyan2Bio project (PID2021-126564OB- C32), funded by MICIU/AEI/ 10.13039/501100011033 and “ERDF A way of making Europe’’., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integrated microalgal biorefinery for carotenoids and bioenergy recovery

  • Ruales Dávila, Evelyn
  • Bellver Catalá, Marta
  • Álvarez González, Ana
  • Garfi, Marianna
  • Sampaio, Igor
  • Passos, Fabiana Lopes del Rei
  • Ferrer Martí, Ivet
This study aimed to evaluate the potential of microalgae grown in wastewater to recover carotenoids and biogas in a biorefinery approach. To this end, two pilot raceway ponds treating real wastewater were operated with a hydraulic retention time (HRT) of 8 and 6 days. The maximum total carotenoid content in harvested biomass was 4.3 mg·gDW-1 with a HRT of 8 days, while it stabilized at 1.5–2.2 mg·gDW-1 with a HRT of 6 days. Biochemical methane potential tests were then run to quantify the biogas production from carotenoid-extracted biomass (136.3 mLCH4·gVS-1), which corresponded to 86% of the methane yield achievable from raw microalgal biomass. Co-digestion with primary sludge increased the methane yield production both for raw and carotenoid-extracted biomass by 58 and 86%, respectively, when a 75:25 ratio was employed and by 28 and 44%, respectively, when a 50:50 ratio (VS basis) was used. This approach is promising for recovering resources (bio-based products and bioenergy) in the framework of a circular bioeconomy., This research has received funding from MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe’’ under the projects AL4BIO (RTI2018-099495-B-C21) and Cyan2Bio (PID2021-126564OB-C32). E. Ruales acknowledges her grant 2020 FISDUR 00592 funded by AGAUR (Generalitat de Catalunya). M. Bellver acknowledges her grant PRE2019-091552 funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Microalgae cell wall hydrolysis using snailase and mechanical sand milling

  • Carvalho Fontes Sampaio, Igor
  • Chahud Maestrello, Chadia
  • Lopes de Moura, Isabela Viana
  • Estevam, Renata
  • Morais, Etiele Greque de
  • Ferrer Martí, Ivet
  • Pinto de Oliveira, Jairo
  • Alves Cassini, Servio Tulio
The extraction of intracellular constituents from recalcitrant microalgae strains stands as a significant challenge and a crucial bottleneck in microalgae processing. This study presents a novel enzymatic approach coupling mechanical lysis through sand milling without commercial glass or zirconium beads, with subsequent snailase treatment, resulting in improved cell wall breakdown and increased release of valuable constituents. The selected microalga was Chlorella sp. L06, renowned for its sturdy cell wall structure. Initial experiments involving sand milling unveiled substantial release of proteins (1.19 mg/mL) and chlorophyll (1.80 of absorbance at 680 nm), underscoring effective cell disruption. Remarkably, the application of snailase after sand milling produced noteworthy outcomes, fostering enhanced cell wall degradation and liberating a spectrum of constituents, encompassing soluble reducing sugars (1.13 mg/mL), proteins (2.28 mg/mL), and chlorophyll (2.83 of absorbance at 680 nm). The process was optimized by applying the Box-Behnken design, which revealed distinct operational parameters that significantly improved the release of soluble sugars and proteins by 46 % and 12.7 %, respectively. Moreover, the presence of snailase also showcased a protective antioxidant effect on chlorophyll during the hydrolysis, shedding light on its multifaceted role in the hydrolysis process. This study introduces an advantageous strategy for efficiently valorizing microalgae biomass using the synergistic potential of mechanical lysis and enzymatic treatment. Furthermore, the developed method contributes achieving promising, sustainable microalgae-based biorefineries., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling challenges to unlock the power of phototrophic systems for wastewater valorization

  • Casagli, Francesca
  • Turolla, Andrea
  • Batstone, D.J.
  • Capson Tojo, Gabriel
  • Ficara, Elena
  • García Serrano, Joan
  • González Flo, Eva
  • Laurent, Julien
  • Lorenz, Tatjana
  • Pierrelée, Michaël
  • Plósz, Benedek Gy.
  • Ribero da Silva, Gustavo Henrique
  • Robles, Angel
  • Rossi, Simone
  • Rueda Hernández, Estel
  • Stegemüller, Lars
  • Steyer, Jean Phillipe
  • Bernard, Olivier
  • Valverde Pérez, Borja
Phototrophic microorganisms are gaining prominence for their dual role in wastewater treatment and resource recovery, converting wastewater into valuable bioproducts. However, their effective deployment needs robust modelling frameworks capable of predicting performance across complex, real-world scenarios. Despite significant advances, key challenges hinder the development and application of such models: ¿ Biological complexity: phototrophic systems involve intricate processes (e.g., photosynthesis, nutrient uptake, microbial interactions, and predation) that are difficult to represent accurately due to their dynamic interdependencies. ¿ Environmental variability: permanent fluctuations in light, temperature, pH, and toxic compounds in outdoor reactors require high-resolution dynamic data for reliable model calibration and prediction. ¿ Data limitations: lack of comprehensive, high-quality datasets (e.g., biological, environmental, and operational conditions) constrains model development, particularly for data-driven approaches. ¿ Multi-scale integration: bridging molecular, cellular, and ecosystem-level processes into a unified modelling framework, including physics, remains a significant hurdle. ¿ Parameter and uncertainty management: models often suffer from non-identifiable parameters, sensitivity to approximations, and insufficient validation against long-term experimental data. ¿ Balancing complexity and applicability: selecting the appropriate level of ecological and mathematical details, tailored to specific applications (e.g., biomass production and nutrient removal) and data availability is critical yet challenging. ¿ Computational and interdisciplinary barriers: high computational costs, especially for hybrid and data-driven models, alongside the need for cross-disciplinary collaboration, further complicate model development. ¿ To overcome these barriers, this work argues for standardized protocols in model design, calibration and validation, alongside enhanced data collection and reconciliation efforts. Integrating innovative approaches, such as metabolic modelling, machine learning and hybrid modelling into digital twins, will be essential to unlock the full potential of phototrophic systems, bridging the gap between theoretical models and industrial implementation., Concerning the contribution of Universitat Politécnica de Catalunya ⋅ BarcelonaTech, this publication is part of the R&D&I project PID2021- 126564OB-C32 (Cyan2Bio), funded by MICIU/AEI/10.13039/ 501100011033 and by ERDF/EU. JG would like to acknowledge the support provided by the ICREA Academia program. GR would like to acknowledge the Brasilian National Council for Scientific and Technological Development (CNPq process 308663/2021-7). EGF would like to thank the European Union-NextGenerationEU, Spanish Ministry of Science, Innovation and Universities, and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. FC and OB are grateful to the support of the ANR Barrier project (ANR-22-CE34-0021). BVP acknowledges the financial support provided by the Danish Research Council for Independent Research under the Sapere Aude DFF Starting Grant 10.46540/2067–00029B., Peer Reviewed, Article signat per xx autors/es: Francesca Casagli a, Andrea Turolla b,*, Damien J. Batstone c, Gabriel Capson-Tojo d, Elena Ficara b, Joan García e, Eva Gonzalez-Flo f, Julien Laurent g, Tatjana Lorenz h, Michaël Pierrelée i, Benedek Gy. Plósz j,n, Gustavo Henrique Ribero Da Silva k, Ángel Robles l, Simone Rossi b,o, Estel Rueda e, Lars Stegemüller m, Jean-Philippe Steyer d, Olivier Bernard a, Borja Valverde-Pérez i a Centre INRIA d’Universit´e Cˆote d’Azur, GreenOwl team, Sophia-Antipolis 06902, France b Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy c Australian Centre for Water and Environmental Biotechnology, The University of Queensland, Brisbane 4072, QLD, Australia d INRAE, Univ Montpellier, LBE, 102 Avenue des ´Etangs, Narbonne 11100, France e GEMMA - Group of Environmental Engineering and Microbiology, Department of Civil and Environmental Engineering, Universitat Polit`ecnica de Catalunya BarcelonaTech, c/ Jordi Girona 1-3, Building D1, E-08034 Barcelona, Spain f GEMMA - Group of Environmental Engineering and Microbiology, Department of Civil and Environmental Engineering, Escola d’Enginyeria de Barcelona Est (EEBE), Universitat Polit`ecnica de Catalunya⋅BarcelonaTech, Av. Eduard Maristany 16, Building C5.1, E-08019 Barcelona, Spain g Universit´e de Strasbourg, ENGEES, CNRS, ICube UMR 7357, F-67000 Strasbourg, France h Department of Architecture and Civil Engineering, ZEuUS - Competence Centre for Sustainable Engineering and Environmental Systems, THM - University of Applied Sciences, Wiesenstr. 14, 35390 Giessen, Germany i Department of Environmental and Resource Engineering, Technical University of Denmark, Bygningstorvet, Bygning 115, 2800 Kgs, Lyngby, Denmark j Department of Chemical Engineering, University of Bath, Claverton Down, Bath BA2 7AY, UK k Department of Civil and Environmental Engineering, School of Engineering, S˜ao Paulo State University (UNESP), Bauru, SP, Brazil l Departament d’Enginyeria Química, ETSE-UV, Universitat de Val`encia, Avinguda de la Universitat s/n, Valencia, Burjassot 46100, Spain m Department of Chemical Engineering, Technical University of Denmark, DTU, Søltofts Plads 228A, Lyngby 2800, Denmark n SWING – Department of Built Environment, Oslo Metropolitan University, Postboks 4 St Olavs Plass, 0130 Oslo, Norway o Energy Technologies and Processes Research Group, Generation Technologies and Materials Department, Ricerca sul Sistema Energetico - RSE S.p.A., v. Rubattino 54, 20134 Milano, Italy, 6 - Aigua Neta i Sanejament, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Resource recovery and contaminants of emerging concern mitigation by microalgae treating wastewater

  • Ruales Dávila, Evelyn
  • Gómez, Cintia
  • Morillas España, Ainoa
  • González López, Cynthia Victoria
  • Escolà Casas, Mònica
  • Matamoros, Victor
  • Garfi, Marianna
  • Ferrer Martí, Ivet
This study aimed to investigate the recovery of agricultural biostimulants and biogas from microalgae treating wastewater, in the framework of a circular bioeconomy. To this end, municipal wastewater was treated in demonstrative raceway ponds, and microalgal biomass (Scenedesmus sp.) was then harvested and downstream processed to recover biostimulants and biogas in a biorefinery approach. The effect of microalgal biostimulants on plants was evaluated by means of bioassays, while the biogas produced was quantified in biochemical methane potential (BMP) tests. Furthermore, the fate of contaminants of emerging concern (CECs) over the process was also assessed. Bioassays confirmed the biostimulant effect of microalgae, which showed gibberellin-, auxin- and cytokinin-like activity in watercress seed germination, mung bean rooting, and wheat leaf chlorophyll retention. In addition, the downstream process applied to raw biomass acted as a pre-treatment to enhance anaerobic digestion performance. After biostimulant extraction, the residual biomass represented 91% of the methane yield from the raw biomass (276 mLCH4·g-1VS). The kinetic profile of the residual biomass was 43% higher than that of the unprocessed biomass. Co-digestion with primary sludge further increased biogas production by 24%. Finally, the concentration of CECs in wastewater was reduced by more than 80%, and only 6 out of 22 CECs analyzed were present in the biostimulant obtained. Most importantly, the concentration of those contaminants was lower than in biosolids that are commonly used in agriculture, ensuring environmental safety., This research was funded by the AL4BIO project “RTI2018-099495-B-C21 and RTI2018-099495-A-C22”, and Cyan2Bio project “PID2021-126564OB-C31 and PID2021-126564OB-C32” (MCIU/AEI/FEDER, EU). E. Ruales acknowledges her PhD scholarship from AGAUR – Generalitat de Catalunya (FI SDUR-2020-00592)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Microalgae harvesting for wastewater treatment and resources recovery: a review

  • Morais, Etiele Greque de
  • Carvalho Fontes Sampaio, Igor
  • González Flo, Eva
  • Ferrer Martí, Ivet
  • Uggetti, Enrica
  • García Serrano, Joan
Microalgae-based wastewater treatment has been conceived to obtain reclaimed water and produce microalgal biomass for bio-based products and biofuels generation. However, microalgal biomass harvesting is challenging and expensive, hence one of the main bottlenecks for full-scale implementation. Finding an integrated approach that covers concepts of engineering, green chemistry and the application of microbial anabolism driven towards the harvesting processes, is mandatory for the widespread establishment of full-scale microalgae wastewater treatment plants. By using nature-based substances and applying concepts of chemical functionalization in already established harvesting methods, the costs of harvesting processes could be reduced while preventing microalgae biomass contamination. Moreover, microalgae produced during wastewater treatment have unique culture characteristics, such as the consortia, which are primarily composed of microalgae and bacteria, that should be accounted for prior to downstream processing. The aim of this review is to examine recent advances in microalgal biomass harvesting and recovery in wastewater treatment systems, considering the impact of consortia variability. The costs of available harvesting technologies, such as coagulation/flocculation, coupled to sedimentation and differential air flotation, are provided. Additionally, promising technologies are discussed, including autoflocculation, bioflocculation, new filtration materials, nanotechnology, microfluidic and magnetic methods., The authors would like to thank the support provided by two distinct projects: Cyan2Bio (funded by the Spanish Ministry of Science and Innovation (MCIN), the Research National Agency (AEI), and the European Regional Development Fund (FEDER) under the grant agreement PID2021-126564OB-C32) and PROMICON (funded by the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 101000733). The knowledge derived from these projects has been instrumental in enriching the depth of this article. Enrica Uggetti is grateful to the Spanish Ministry of Industry and Economy for her research grant (RYC2018-025514-I). Igor C.F. Sampaio is grateful to the Brazilian National Council for Scientific and Technological Development (CNPq) for the financial support and his postdoctoral scholarship (Call 26/2021). Eva Gonzalez-Flo is grateful to the European Union-Next Generation EU, Ministry of Universities and Recovery, Transformation and Resilience Plan for her research grant [2021UPF-MS-12]. Joan Garcia acknowledges the support provided by the ICREA Academia program., Peer Reviewed, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament, Postprint (published version)