Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Passive Sensing for the Internet of Medical Things, A Low-Cost Battery-Less Wearable Sweat Rate Sensor

  • López-Soriano, Sergio|||0000-0002-1219-7125
  • Parrón Granados, Josep|||0000-0002-1577-6333
  • Melià-Seguí, Joan|||0000-0001-8473-4500
Continuous monitoring of the sweat rate can support the early diagnosis of several chronic diseases such as Parkinson's or diabetes. However, current wearable wireless devices use batteries that have a limited operating time, also increasing their cost, and thus, reducing their accessibility to a large part of the population. In that sense, passive IoT technologies could be exploited to produce battery-less low-cost antenna-based sensors (ABS). In this paper, we propose a UHF RFID battery-less antenna-based sensor that transforms the amount of sweat accumulated inside a microfluidic channel into a variation of the tag response. In order to provide multi-level sensing, we rely on the IC self-tuning sensor code, which is passively backscattered to the reader unit, instead of channel information which may provide insufficient resolution depending on the geographical location. The sensor performance is validated experimentally, achieving an accuracy of 90% in the estimation of the sweat loss and 95% in the estimation of the average sweat rate.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analytical Improvement of Common Port Return Loss Equiripple in Multiport Network Synthesis

  • Faura, Mario|||0000-0003-3039-7793
  • Caballero, Carlos|||0000-0001-9194-9163
  • Verdú, Jordi|||0000-0002-2434-7012
  • Paco, Pedro de|||0000-0002-7628-7189
This letter presents an analytical method for improving the common port return loss (CPRL) equiripple of multiplexer synthesis. The method proposes detuning the reflection zeros (RZs) of the initially imposed Chebyshev channels along imaginary axis. This adjustment introduces a minor deviation from the ripple behavior in individual channels, effectively compensating for the equiripple discrepancy in the overall multiport function and yielding excellent execution times. Finally, a numerical example is provided to verify the method's enhancement over conventional multiplexer synthesis techniques, highlighting its practical effectiveness.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

General Synthesis Methodology for Acoustic Wave Ladder Filters in the Bandpass Domain

  • Cano, Santi|||0000-0001-5751-5994
  • Caballero, Carlos|||0000-0001-9194-9163
  • Barrera, Omar
  • Lu, Ruochen|||0000-0003-0025-3924
  • Verdú, Jordi|||0000-0002-2434-7012
  • Paco, Pedro de|||0000-0002-7628-7189
In designing acoustic wave (AW) ladder filters, synthesis methods utilize the lowpass prototype (LP) representation to analyze bandpass responses in the normalized domain. This technique reduces the filter's polynomial order and achieves asymmetric responses by incorporating frequency-invariant reactance (FIR) elements. While this technique is particularly effective for narrowband filter designs, it faces limitations with wideband filters due to errors that arise when transforming extracted LP elements to the bandpass domain. There are different approaches for the exact modeling of AW ladder filters in the real frequency domain. However, current direct bandpass (DB) techniques for AW ladder filters cannot be generalized, as they lack flexibility in characterizing frequency-dependent input and output (I/O) phases and suffer from numerical issues during parameter extraction due to excessively large polynomial coefficients in high-order or narrowband filter designs. This work aims to address both problems: first, to generalize the DB methodology for AW ladder filters by computing the transfer function while considering the asymptotic behavior at both the origin and infinity, as well as controlling the frequency-dependent I/O phases through complex reflection zeros (CRZs). Second, to enhance numerical accuracy during parameter extraction by relying on precise root-finding methods rather than interpolated coefficients. To validate the effectiveness of the proposed DB approach, the synthesized model has been compared with a manufactured LiNbO thin-film AW ladder filter, which features a wide fractional bandwidth (FBW) of 18% and demonstrates excellent agreement between the simulated and measured responses. Finally, an 18th-order AW ladder filter has been synthesized to validate numerical stability even for narrowband filters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Battery-less UHF RFID sensor for soil moisture monitoring

  • Alsultan, Mohammed A.|||0000-0003-2988-042X
  • Melià-Seguí, Joan|||0000-0001-8473-4500
  • Parrón Granados, Josep|||0000-0002-1577-6333
  • López-Soriano, Sergio|||0000-0002-1219-7125
Soil moisture monitoring is essential for optimizing irrigation strategies, enhancing crop yields, and conserving water resources in precision agriculture. Traditional sensing methods often rely on battery-powered devices, which require maintenance and periodic replacement. This work introduces a batteryless ultrahigh frequency radio frequency identification (UHF RFID) soil moisture sensor that leverages RFID technology and an interdigitated capacitor (IDC) for capacitive sensing. The proposed sensor integrates a meandered dipole antenna and an EM4152 RFID chip, enabling wireless monitoring of soil Volumetric Water Content (VWC) without the need for an external power source. The sensor's performance is validated through controlled soil moisture experiments, where capacitance readings are correlated with reference measurements from the commercial TEROS 10 soil moisture sensor. The sensor was tested and calibrated using three different soil types: sandy, clay, and a commercial combo substrate. The results demonstrate strong linear correlations with TEROS 10 measurements across all soil types, with coefficients of determination of R2 = 0.9648 (sandy), R2 = 0.9512 (clay), and R2 = 0.9444 (combo). Furthermore, tests conducted at varying water contents and a read range of up to 3.5 meters validate the sensor's robustness across different soil conditions. The findings highlight the potential of battery-less RFID-based sensing for sustainable and maintenance-free soil moisture monitoring in agricultural applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of In-Line Fully Canonical Filters by Solving a Matrix Completion Problem Under AW Ladder Constraints

  • Mesas, Joel|||0009-0001-4888-826X
  • Verdú, Jordi|||0000-0002-2434-7012
  • Paco, Pedro de|||0000-0002-7628-7189
This work extends a matrix-based numerical methodology to cover fully canonical generalized Chevyshev (GC) transfer functions by reconfiguring canonical filter topologies into dangling inline structures, with a direct impact on the consideration of ladder circuit filters. The transformation matrix that maps a canonical matrix to the dangling inline is defined in such a way that, within a mathematical matrix completion framework, it can nullify the source-load coupling, modify the source and load reactances to accommodate the phase at the first and last extracted-pole sections of the network, and capture the response information in a different size matrix.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization of nonvolatile switches based on 2-D multilayered hBN memristors for high-frequency applications

  • Verdú, Jordi|||0000-0002-2434-7012
  • Amarilla, Tobías|||0009-0002-4208-9237
  • Shen, Yaqing|||0000-0002-2325-5618
  • Pazos, Sebastián Matías|||0000-0002-7354-4530
  • Lanza, Mario|||0000-0003-4756-8632
  • Paco, Pedro de|||0000-0002-7628-7189
RF/microwave systems with large number of elements usually require switching elements with very small footprint, but providing very good electrical performance, low switching times, and good power-handling capabilities. In this sense, nonvolatile switches based on 2-D materials are emerging as a very suitable alternative to CMOS or MEMS-based technologies, mainly due to the capability of keeping a certain state with no energy consumption. In this article, different switches have been designed and fabricated using a multilayered structure based on 18 2-D hexagonal boron nitride (hBN) layers on three different substrates, high-resistivity silicon, quartz, and polycrystaline CVD diamond. The proposed device has been characterized in a frequency range up to 26.5GHz for these three substrates. The ON-state resistance and off-state capacitance have been extracted from experimental data using an equivalent electric model being 28~\Omega and 22 fF, leading to insertion losses (ILs) better than 2.5 dB in case of CVD diamond, and isolation better than 10 dB in case of quartz, for the on- and off-states, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

S-Band Fully Canonical Dual-Mode BaTiO3 Ceramic Filter

  • Vazquez, Víctor D.|||0009-0004-6930-0439
  • Pampliega, Ricardo|||0009-0008-2084-5728
  • Verdú, Jordi|||0000-0002-2434-7012
  • Paco, Pedro de|||0000-0002-7628-7189
This work presents the design and fabrication of a narrowband, fully canonical, fourth-order monolithic filter with fourth transmission zeros (TZs) operating in the S-band. The device is based on dielectric resonators made of barium titanate (BaTiO) ceramics. The TE, TE, and TE modes are employed to generate the poles and TZs. The resonant frequencies are tuned by modifying the chamfer lengths at opposite corners of the square resonator. The coupling between cavities is implemented through an iris structure strategically arranged to fully exploit the capabilities of the degenerate dual modes. The experimental results show excellent agreement with the simulations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An Analytical Model for Monitoring Liquid Volume in Absorbent Media Using Capacitive Sensors

  • López-Soriano, Sergio|||0000-0002-1219-7125
Sweat rate monitoring is essential for the accurate interpretation of biomarker concentrations in wearable sweat sensors. In addition, sweat rate measurement is particularly relevant for the early detection of diseases associated with hyperhidrosis and hypohidrosis, conditions that affect thermoregulation, hydration balance, and metabolic function. This work presents an absorbent-based capacitive sensor for sweat rate monitoring applications. The sensor consists of a parallel-plate architecture, where an absorbent textile acts as the dielectric. A novel analytical model based on mixing rules enables real-time estimation of absorbed liquid volume from capacitance measurements. To account for slow response and evaporation effects, an empirical dynamic model is introduced, improving accuracy under varying sweat rates. Experimental validation across four infusion rates demonstrates a volumetric estimation error below 10% and average sweat rate error below 3%. These results position the system as a viable candidate for autonomous sweat monitoring. Moreover, the sensing architecture is well-suited for industrial applications involving fluid absorption in porous media, such as textile processing or hygiene product testing.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual-mode BaTiO3 Ceramic Filter with Gold-copper Metallization

  • Vázquez Pereira, Víctor D.
  • Chávez, Marcelo E.
  • Murcia-López, Sebastián
  • Verdú, Jordi
  • Paco, Pedro de
In the design and fabrication of ceramic filters, the quality of metallization is crucial to minimize resistive losses and ensure optimal resonator performance. This work presents the design and fabrication of a monoblock dual-mode filter with two distinct types of couplings, based on barium titanate (BaTiO<inf>3</inf>) ceramics, operating at S-band frequencies. Sputtering deposition was used to create a 5 nm gold seed layer, on which a 30 µm copper metallization was grown through electroplating. This method guarantees high conductivity in the resonator coating, and test results demonstrated that the fabricated device offers very good filtering performance with a minimal insertion loss of 0.57 dB., Special thanks to Dr. Josep Parron Granados, Professor at the Department of Telecommunications and Systems Engineering of the Universitat Autònoma de Barcelona, for his valuable contributions. This work has been supported by the Agencia Estatal de Investigación (AEI)-Ministerio de Ciencia e Innovación under Project PID2021-127203OB-I00 and PID2024-159605OBI00., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

UHF RFID wristbands, a long-range, durable, flexible, and low-cost tag antenna design

  • López-Soriano, Sergio|||0000-0002-1219-7125
  • Melià-Seguí, Joan|||0000-0001-8473-4500
  • Parrón Granados, Josep|||0000-0002-1577-6333
This contribution is focused on the performance evaluation of a long-range patch-type antenna for ultra-high frequency (UHF) radiofrequency identification (RFID) wristband tags. The antenna design was presented in the IEEE International Conference on RFID Technology and Applications (RFID-TA), held on September 4-6, 2023, Aveiro, Portugal, under the title "A durable and flexible, low-cost tag antenna design for UHF RFID wearable applications". First, the theoretical and practical evaluation of the wristband tag antenna is conducted in four different scenarios. Next, the studied solution is benchmarked against a selection of the current commercial solutions. The proposed antenna design is mounted on a flexible and low-cost Teflon (PTFE) substrate, and it consists of a disconnected metal-substrate-metal layered structure. To produce a light and comfortable wearable device, the wristband design constraints limit the thickness to 1 mm and the width to 3 cm. The design is intended to be used in human identification and tracking applications while providing enough durability to endure for a prolonged period without significant antenna de-tuning. The proposed wristband is designed to operate in the FCC band (902-928 MHz) and it can reach distances over 3-5 meters, depending on the microchip sensitivity. The results of the experiments show that the performance of the proposed wristband design is comparable to current commercial solutions, while offering a different set of features. A discussion on the comparison between the current solutions and the proposed wristband antenna is provided in the text.