Pasar al contenido principal

RECURSOS HIDROGEOLOGICOS EN RIESGO: CONFRONTANDO LOS IMPACTOS LIGADOS AL CAMBIO CLIMATICO CON EL INCREMENTO DE LA DEMANDA HIDRICA

PID2021-127911OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Smoothed Particle Hydrodynamics for anisotropic dispersion in heterogeneous porous media

  • Pérez Illanes, Rodrigo Alfonso|||0000-0002-8086-9122
  • Solé Marí, Guillem|||0000-0002-9890-079X
  • Fernández García, Daniel|||0000-0002-4667-3003
In the context of modeling solute transport through heterogeneous porous media, particle methods possess inherent advantages with respect to mesh-based (Eulerian) methods. In Smoothed Particle Hydrodynamics (SPH), particles represent fluid volumes exchanging concentrations with their neighbors to emulate hydrodynamic dispersion, and advection is simulated by the particles’ displacement. This crucially prevents problems that are otherwise typically associated with Eulerian advection schemes (especially at high grid-Péclet numbers), such as numerical diffusion. Despite the advantages of SPH, modeling dispersion with anisotropic coefficients remains a challenge for the approach, with studies reporting unphysical negative concentrations in conservative problems. This has likely hindered its practical use because dispersion is intrinsically anisotropic in porous media. This article provides a review and numerical evaluation of SPH for simulating dispersion, focusing on three formulations compatible with anisotropic dispersion coefficients. The analysis includes a scheme for which negative concentrations have been formerly reported, plus two more recently developed methods which are applied here for the first time to the problem of anisotropic dispersion in heterogeneous porous media. The SPH schemes are tested under different degrees of dispersion anisotropy for both homogeneous and heterogeneous velocity fields. The results indicate that the newer SPH schemes can produce accurate results without negative concentrations while considering anisotropic dispersion, providing a valid alternative to simulate solute transport through heterogeneous domains., To Escola Tècnica Superior d’Enginyers de Camins, Canals i Ports de Barcelona for granting computational resources in the cluster Titani, which contributed to the results presented in this article. The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska - Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network – MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of sharp soil interfaces on solute transport: insights from a reactive tracer test in a 2D intermediate-scale experiment

  • González Subiabre, Reinaldo Guido Moisés
  • Bertran Oller, Oriol|||0009-0009-7897-2735
  • Fernández García, Daniel|||0000-0002-4667-3003
Understanding solute transport across interfaces between different porous materials is crucial for subsurface applications. Column tracer experiments have suggested solute accumulation at these interfaces. This effect cannot be explained by standard models based on Fickian flux continuity and the advection–dispersion equation. To analyze this phenomenon, we present reactive transport experiments in a 2D intermediate-scale horizontal tank to visualize and evaluate the spatiotemporal evolution of a solute plume crossing a sharp interface between coarse and fine materials. The plume results from the reaction of two fluid solutions entering the tank in parallel through inlet ports. The reaction product is analyzed using mixing and reaction metrics. Results show the reaction product encounters anomalous resistance when the plume crosses the coarse-to-fine (CF) interface. This effect is less pronounced in the fine-to-coarse (FC) transition. This asymmetric resistance does not produce solute accumulation behind the interface, a difference from the results obtained with the one-dimensional model. Instead, results show enhanced transverse spread of the reaction product in the coarse-to-fine transition, with slow release in the fine material. A sudden decrease in the longitudinal concentration profile across the interface is observed. Mixing metrics show that as apparent transverse dispersivity increases closer to the interface in the CF transition, the scalar dissipation rate and total mass reacted increase, indicating that the CF configuration promotes greater solute reactivity near the interface compared to the FC configuration., The authors thank Daniela Reales Nuñez of the Universitat Politècnica de Catalunya for her invaluable support during the laboratory work. This research was funded by the Ministry of Economic Affairs and Digital Transformation of the Government of Spain (GRADIENT, PID2021-127911OB-I00), the State Agency for Research (AGAUR-SGR-609) of the Generalitat de Catalunya, and the International Doctoral Scholarship Program of Chile, managed by ANID (National Research and Development Agency)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

MODPATH-RW: a random walk particle tracking code for solute transport in heterogeneous aquifers

  • Pérez Illanes, Rodrigo Alfonso|||0000-0002-8086-9122
  • Fernández García, Daniel|||0000-0002-4667-3003
Random walk particle tracking (RWPT) is a discrete particle method that offers several advantages for simulating solute transport in heterogeneous geological systems. The formulation is a discrete solution to the advection-dispersion equation, yielding results that are not influenced by grid-related numerical dispersion. Numerical dispersion impacts the magnitude of concentrations and gradients obtained from classical grid-based solvers in advection-dominated problems with relatively large grid Péclet numbers. Accurate predictions of concentrations are crucial for reactive transport studies, and RWPT has been recognized for its potential benefits for this kind of application. This highlights the need for a solute transport program based on RWPT that can be seamlessly integrated with industry-standard groundwater flow models. This article presents a solute transport code that implements the RWPT method by extension of the particle tracking model MODPATH, which provides the base infrastructure for interacting with several variants of MODFLOW groundwater flow models. The implementation is achieved by developing a method for determining the exact cell-exit position of a particle undergoing simultaneous advection and dispersion, allowing for the sequential transfer of particles between flow model cells. The program is compatible with rectangular unstructured grids and integrates a module for the smoothed reconstruction of concentrations. In addition, the program incorporates parallel processing of particles using the OpenMP library, enabling faster simulations of solute transport in heterogeneous systems. Numerical test cases involving different applications in hydrogeology benchmark the RWPT model with well-known transport codes., The authors acknowledge Alden Provost, Chris Langevin, and Joseph Hughes of the U.S. Geological Survey for helpful discussions during program developments. The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska—Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network—MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonlinear formulation of multicomponent reactive transport with species-specific dispersion properties

  • Pérez Illanes, Rodrigo Alfonso|||0000-0002-8086-9122
  • Saaltink, Maarten Willem|||0000-0003-0553-4573
  • Fernández García, Daniel|||0000-0002-4667-3003
The modeling of reactive transport through porous media is a challenging numerical problem. Methods of solution have leveraged the stoichiometry of chemical reactions to address the transport of multiple aqueous species by expressing them in terms of an equivalent, linearly independent variable (component). This approach effectively decouples advection-dispersion transport from the source terms associated with equilibrium reactions. A common assumption found in the literature is that all species disperse with the same transport coefficients. Recent experimental studies have discussed that this is not necessarily the case, particularly for transverse mixing, which is limited by the species-specific molecular diffusion. This article presents a formulation of multicomponent reactive transport that takes into account the differences in dispersion coefficients. These differences lead to a nonlinear transport equation for the components, from where an expression for evaluating reaction rates is derived. It is demonstrated that this expression simplifies to the well-known equations assuming the same dispersion for all species. Numerical simulations of a binary chemical system under diffusion- and advection-dominated transport conditions are used to evaluate the influence that differential transport coefficients have upon the output of chemical reactions. Results indicate that differences in transport coefficients are particularly relevant when the chemical signature of the input solutions is not strongly dominated by one of the species in the component. Unexpectedly, this opens the possibility to mineral dissolution coexisting with precipitation during the mixing of two waters in equilibrium. This phenomenon can be explained by nonlinear mixing processes proportional to the differences in transport coefficients., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska—Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network—MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Practical guidance for improving pump-test based inference of hydraulic parameters in heterogeneous unconfined aquifers

  • Naderi, Mostafa|||0000-0002-3419-5016
  • Sánchez Vila, Francisco Javier|||0000-0002-1234-9897
  • Gupta, Hoshin Vijai
Hydrogeological modeling relies on scale estimates for relevant hydraulic parameters. To obtain these, pump test data are typically interpreted using methods derived for idealized conditions (such as a spatially homogeneous medium). For unconfined aquifers, interpretation is made challenging by the time-evolving phreatic surface that imposes strong non-linearities in the equations. This study uses numerical simulation to examine the nature of parameter estimates obtained for heterogeneous unconfined aquifers using Neuman-based solutions. Results show that the representative horizontal extent of the cone of depression stabilizes when its radius approaches/exceeds times the correlation length scale of aquifer heterogeneity. In practice, long pumping durations are needed to achieve this when length scales are large, presenting difficulties due to limited horizontal cone expansion caused by vertical leakage when vertical conductivity and specific yield are high. Further, the interpretation should properly account for observation well location. Estimates using data from wells beyond the horizontal representative extent align with arithmetic and geometric means, while those using wells from within the vertical representative extent deviate due to vertical and horizontal heterogeneities. Meanwhile, results obtained using wells from the “transition” zone are influenced by horizontal heterogeneity. The practical implications are that (a) Neuman-based estimates will only be reliable when the cone of depression approaches/exceeds the horizontal representative size, and (b) Observation wells should be located at appropriately representative distances. We recommend using a minimum of three strategically placed observation wells to ensure some degree of reliability when interpreting the results of pump tests in heterogeneous unconfined aquifers., M.N. is thankful for the support of the Institute for Advanced Studies in Basic Sciences (IASBS) of Zanjan, Iran. X. S‐V acknowledges the support of AGAURGeneralitat de Catalunya –Suport Grups de Recerca SGR609 and the Spanish Ministry of Science, Innovation and Universities, projects GRADIENT (PID2021‐127911OB‐I00) and HETMAR (PID2023‐148543OA‐I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Pore-scale coupling of flow, biofilm growth, and nutrient transport: a microcontinuum approach

  • Dawi, Malik Ali A.
  • Starnoni, Michele|||0000-0002-8552-6997
  • Porta, Giovanni
  • Sánchez Vila, Francisco Javier|||0000-0002-1234-9897
Biofilms are microbial communities that influence the chemical and physical properties of porousmedia. Understanding their formation is essential for different topics, such as water management,bioremediation, and oil recovery. In this work, we present a pore-scale model for biofilm dynamics that is fullycoupled with fluid flow and transport of growth-limiting nutrients. Built upon micro-continuum theory, themodel considers biofilm as a fluid-filled micro-porous medium and simulates flow based on a coupled Darcy-Brinkman-Stokes model. We outline the key assumptions of the model and present the governing equations ofbiofilm dynamics, along with details of their numerical implementation. Through numerical simulations ofbiofilm development at the scale of a single pore, we analyze the influence of flow dynamics upon biofilmspatial distribution, as well as the way effective permeability is altered and evolves under different growthconditions. Our emphasis is on the critical hydrodynamic point, that is, the transition between bulky anddispersive biofilm shapes as a function of the driving parameters. We introduce a dimensionless number, termedDt, defined as the ratio between hydrodynamic and biomass cohesion forces, which provides a bulkcharacterization of the biomass-flow system, and allows to assess biofilm morphology and growth patterns. Wethen discuss results in relation to available experimental data, where estimated Dt values are in line with specificbiofilm growth patterns, ranging from boundary-layer appearance (Dt > 1) to bulky shapes (Dt < 1)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of mixing-driven calcite precipitation on solute transport: Laboratory visualization and tracer test analysis

  • González Subiabre, Reinaldo Guido Moisés
  • Pérez Illanes, Rodrigo
  • Reales Núñez, Daniela Fernanda
  • Saaltink, Maarten Willem|||0000-0003-0553-4573
  • Trabucchi, Michela|||0000-0003-1198-8184
  • Fernández García, Daniel|||0000-0002-4667-3003
Understanding the effects of mixing-driven precipitation on solute transport behavior is critical for reactive transport predictions, yet its complexity, arising from the interplay of flow dynamics, solute transport, and geochemical reactions, remains a significant challenge. In particular, mineral precipitation modifies the hydraulic properties of porous media. The impact of this process on the solute transport behavior remains largely unexplored and is crucial for accurate reactive transport predictions. This study presents a controlled laboratory investigation of mixing-driven calcite precipitation (MDP) in an intermediate-scale Hele-Shaw cell, simulating a coarse-sand porous medium. The experiment allowed for direct visualization of the spatiotemporal evolution of precipitation while continuously monitoring hydraulic properties. Self-organized heterogeneities in the precipitate structure were observed, with calcite layers forming symmetric patterns aligned with the main flow, contrasting with the asymmetry predicted by a semi-analytical model under idealized conditions. Tracer tests conducted before and after precipitation demonstrated significant impacts on solute transport, including the emergence of strong anomalous transport features, such as earlier solute arrival, a distinct double peak, and pronounced tailing. These findings highlight the critical role of precipitation-induced heterogeneities in shaping transport behavior, emphasizing the need to integrate these dynamics into reactive transport models for improved predictive accuracy., This research was funded by the Ministry of Economic Affairs and Digital Transformation of the Government of Spain (GRADIENT, PID2021-127911OB-I00), the State Agency for Research (AGAUR-SGR-609) of the Generalitat de Catalunya, and the International Doctoral Scholarship Program of Chile, managed by ANID (National Research and Development Agency). The authors thank Maria Llinàs Griful of the Universitat Politècnica de Catalunya for her invaluable support during the laboratory work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A general purpose parallel Fortran code for grid projected concentration reconstruction from multidimensional particle distributions

  • Pérez Illanes, Rodrigo Alfonso|||0000-0002-8086-9122
  • Fernández García, Daniel|||0000-0002-4667-3003
Particle-based transport models are widely used for simulating the movement of pollutants in environmental systems. Unlike grid-based methods, particles naturally address advective transport without numerical dispersion. However, these models require concentration reconstruction from the discrete particle information. This is computationally demanding in multidimensional problems, posing a challenge for field-scale models requiring frequent reconstruction. Grid Projected Kernel Density Estimation (GPKDE) is a cell-averaged reconstruction with improvements in computational performance compared to classical KDE. Currently, no programs implementing this method are readily integrated into particle simulators, compatible with three-dimensional domains, and particles with unequal weights. This article introduces a Fortran code for general-purpose GPKDE, with modular functionalities facilitating the integration into external software. The program implements locally adaptive kernel bandwidth selection and alternatives for the reconstruction from particles with non-uniform weights. The code is parallelized with the OpenMP library. Numerical test cases demonstrate the program’s applicability and scalability of the parallel implementation., To Guillem Sole-Mari for discussions regarding BAKS source code. To Escola Tècnica Superior d’Enginyers de Camins, Canals i Ports de Barcelona for granting computational resources in the cluster Titani, which contributed to results presented in this article. The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska - Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network – MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain ., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Pore-scale coupling of flow, biofilm growth, and nutrient transport: a microcontinuum approach

  • Dawi, Malik Ali A.
  • Starnoni, Michele
  • Porta, Giovanni
  • Sánchez Vila, Francisco Javier
Biofilms are microbial communities that influence the chemical and physical properties of porousmedia. Understanding their formation is essential for different topics, such as water management,bioremediation, and oil recovery. In this work, we present a pore-scale model for biofilm dynamics that is fullycoupled with fluid flow and transport of growth-limiting nutrients. Built upon micro-continuum theory, themodel considers biofilm as a fluid-filled micro-porous medium and simulates flow based on a coupled Darcy-Brinkman-Stokes model. We outline the key assumptions of the model and present the governing equations ofbiofilm dynamics, along with details of their numerical implementation. Through numerical simulations ofbiofilm development at the scale of a single pore, we analyze the influence of flow dynamics upon biofilmspatial distribution, as well as the way effective permeability is altered and evolves under different growthconditions. Our emphasis is on the critical hydrodynamic point, that is, the transition between bulky anddispersive biofilm shapes as a function of the driving parameters. We introduce a dimensionless number, termedDt, defined as the ratio between hydrodynamic and biomass cohesion forces, which provides a bulkcharacterization of the biomass-flow system, and allows to assess biofilm morphology and growth patterns. Wethen discuss results in relation to available experimental data, where estimated Dt values are in line with specificbiofilm growth patterns, ranging from boundary-layer appearance (Dt > 1) to bulky shapes (Dt < 1)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of mixing-driven calcite precipitation on solute transport: Laboratory visualization and tracer test analysis

  • González Subiabre, Reinaldo Guido Moisés
  • Pérez Illanes, Rodrigo
  • Reales Núñez, Daniela Fernanda
  • Saaltink, Maarten Willem
  • Trabucchi, Michela
  • Fernández García, Daniel
Understanding the effects of mixing-driven precipitation on solute transport behavior is critical for reactive transport predictions, yet its complexity, arising from the interplay of flow dynamics, solute transport, and geochemical reactions, remains a significant challenge. In particular, mineral precipitation modifies the hydraulic properties of porous media. The impact of this process on the solute transport behavior remains largely unexplored and is crucial for accurate reactive transport predictions. This study presents a controlled laboratory investigation of mixing-driven calcite precipitation (MDP) in an intermediate-scale Hele-Shaw cell, simulating a coarse-sand porous medium. The experiment allowed for direct visualization of the spatiotemporal evolution of precipitation while continuously monitoring hydraulic properties. Self-organized heterogeneities in the precipitate structure were observed, with calcite layers forming symmetric patterns aligned with the main flow, contrasting with the asymmetry predicted by a semi-analytical model under idealized conditions. Tracer tests conducted before and after precipitation demonstrated significant impacts on solute transport, including the emergence of strong anomalous transport features, such as earlier solute arrival, a distinct double peak, and pronounced tailing. These findings highlight the critical role of precipitation-induced heterogeneities in shaping transport behavior, emphasizing the need to integrate these dynamics into reactive transport models for improved predictive accuracy., This research was funded by the Ministry of Economic Affairs and Digital Transformation of the Government of Spain (GRADIENT, PID2021-127911OB-I00), the State Agency for Research (AGAUR-SGR-609) of the Generalitat de Catalunya, and the International Doctoral Scholarship Program of Chile, managed by ANID (National Research and Development Agency). The authors thank Maria Llinàs Griful of the Universitat Politècnica de Catalunya for her invaluable support during the laboratory work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MODPATH-RW: a random walk particle tracking code for solute transport in heterogeneous aquifers

  • Pérez Illanes, Rodrigo Alfonso
  • Fernández García, Daniel
Random walk particle tracking (RWPT) is a discrete particle method that offers several advantages for simulating solute transport in heterogeneous geological systems. The formulation is a discrete solution to the advection-dispersion equation, yielding results that are not influenced by grid-related numerical dispersion. Numerical dispersion impacts the magnitude of concentrations and gradients obtained from classical grid-based solvers in advection-dominated problems with relatively large grid Péclet numbers. Accurate predictions of concentrations are crucial for reactive transport studies, and RWPT has been recognized for its potential benefits for this kind of application. This highlights the need for a solute transport program based on RWPT that can be seamlessly integrated with industry-standard groundwater flow models. This article presents a solute transport code that implements the RWPT method by extension of the particle tracking model MODPATH, which provides the base infrastructure for interacting with several variants of MODFLOW groundwater flow models. The implementation is achieved by developing a method for determining the exact cell-exit position of a particle undergoing simultaneous advection and dispersion, allowing for the sequential transfer of particles between flow model cells. The program is compatible with rectangular unstructured grids and integrates a module for the smoothed reconstruction of concentrations. In addition, the program incorporates parallel processing of particles using the OpenMP library, enabling faster simulations of solute transport in heterogeneous systems. Numerical test cases involving different applications in hydrogeology benchmark the RWPT model with well-known transport codes., The authors acknowledge Alden Provost, Chris Langevin, and Joseph Hughes of the U.S. Geological Survey for helpful discussions during program developments. The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska—Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network—MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A general purpose parallel Fortran code for grid projected concentration reconstruction from multidimensional particle distributions

  • Pérez Illanes, Rodrigo Alfonso
  • Fernández García, Daniel
Particle-based transport models are widely used for simulating the movement of pollutants in environmental systems. Unlike grid-based methods, particles naturally address advective transport without numerical dispersion. However, these models require concentration reconstruction from the discrete particle information. This is computationally demanding in multidimensional problems, posing a challenge for field-scale models requiring frequent reconstruction. Grid Projected Kernel Density Estimation (GPKDE) is a cell-averaged reconstruction with improvements in computational performance compared to classical KDE. Currently, no programs implementing this method are readily integrated into particle simulators, compatible with three-dimensional domains, and particles with unequal weights. This article introduces a Fortran code for general-purpose GPKDE, with modular functionalities facilitating the integration into external software. The program implements locally adaptive kernel bandwidth selection and alternatives for the reconstruction from particles with non-uniform weights. The code is parallelized with the OpenMP library. Numerical test cases demonstrate the program’s applicability and scalability of the parallel implementation., To Guillem Sole-Mari for discussions regarding BAKS source code. To Escola Tècnica Superior d’Enginyers de Camins, Canals i Ports de Barcelona for granting computational resources in the cluster Titani, which contributed to results presented in this article. The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska - Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network – MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain ., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonlinear formulation of multicomponent reactive transport with species-specific dispersion properties

  • Pérez Illanes, Rodrigo Alfonso
  • Saaltink, Maarten Willem
  • Fernández García, Daniel
The modeling of reactive transport through porous media is a challenging numerical problem. Methods of solution have leveraged the stoichiometry of chemical reactions to address the transport of multiple aqueous species by expressing them in terms of an equivalent, linearly independent variable (component). This approach effectively decouples advection-dispersion transport from the source terms associated with equilibrium reactions. A common assumption found in the literature is that all species disperse with the same transport coefficients. Recent experimental studies have discussed that this is not necessarily the case, particularly for transverse mixing, which is limited by the species-specific molecular diffusion. This article presents a formulation of multicomponent reactive transport that takes into account the differences in dispersion coefficients. These differences lead to a nonlinear transport equation for the components, from where an expression for evaluating reaction rates is derived. It is demonstrated that this expression simplifies to the well-known equations assuming the same dispersion for all species. Numerical simulations of a binary chemical system under diffusion- and advection-dominated transport conditions are used to evaluate the influence that differential transport coefficients have upon the output of chemical reactions. Results indicate that differences in transport coefficients are particularly relevant when the chemical signature of the input solutions is not strongly dominated by one of the species in the component. Unexpectedly, this opens the possibility to mineral dissolution coexisting with precipitation during the mixing of two waters in equilibrium. This phenomenon can be explained by nonlinear mixing processes proportional to the differences in transport coefficients., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska—Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network—MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of sharp soil interfaces on solute transport: insights from a reactive tracer test in a 2D intermediate-scale experiment

  • González Subiabre, Reinaldo Guido Moisés
  • Bertran Oller, Oriol
  • Fernández García, Daniel
Understanding solute transport across interfaces between different porous materials is crucial for subsurface applications. Column tracer experiments have suggested solute accumulation at these interfaces. This effect cannot be explained by standard models based on Fickian flux continuity and the advection–dispersion equation. To analyze this phenomenon, we present reactive transport experiments in a 2D intermediate-scale horizontal tank to visualize and evaluate the spatiotemporal evolution of a solute plume crossing a sharp interface between coarse and fine materials. The plume results from the reaction of two fluid solutions entering the tank in parallel through inlet ports. The reaction product is analyzed using mixing and reaction metrics. Results show the reaction product encounters anomalous resistance when the plume crosses the coarse-to-fine (CF) interface. This effect is less pronounced in the fine-to-coarse (FC) transition. This asymmetric resistance does not produce solute accumulation behind the interface, a difference from the results obtained with the one-dimensional model. Instead, results show enhanced transverse spread of the reaction product in the coarse-to-fine transition, with slow release in the fine material. A sudden decrease in the longitudinal concentration profile across the interface is observed. Mixing metrics show that as apparent transverse dispersivity increases closer to the interface in the CF transition, the scalar dissipation rate and total mass reacted increase, indicating that the CF configuration promotes greater solute reactivity near the interface compared to the FC configuration., The authors thank Daniela Reales Nuñez of the Universitat Politècnica de Catalunya for her invaluable support during the laboratory work. This research was funded by the Ministry of Economic Affairs and Digital Transformation of the Government of Spain (GRADIENT, PID2021-127911OB-I00), the State Agency for Research (AGAUR-SGR-609) of the Generalitat de Catalunya, and the International Doctoral Scholarship Program of Chile, managed by ANID (National Research and Development Agency)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Smoothed Particle Hydrodynamics for anisotropic dispersion in heterogeneous porous media

  • Pérez Illanes, Rodrigo Alfonso
  • Solé Marí, Guillem
  • Fernández García, Daniel
In the context of modeling solute transport through heterogeneous porous media, particle methods possess inherent advantages with respect to mesh-based (Eulerian) methods. In Smoothed Particle Hydrodynamics (SPH), particles represent fluid volumes exchanging concentrations with their neighbors to emulate hydrodynamic dispersion, and advection is simulated by the particles’ displacement. This crucially prevents problems that are otherwise typically associated with Eulerian advection schemes (especially at high grid-Péclet numbers), such as numerical diffusion. Despite the advantages of SPH, modeling dispersion with anisotropic coefficients remains a challenge for the approach, with studies reporting unphysical negative concentrations in conservative problems. This has likely hindered its practical use because dispersion is intrinsically anisotropic in porous media. This article provides a review and numerical evaluation of SPH for simulating dispersion, focusing on three formulations compatible with anisotropic dispersion coefficients. The analysis includes a scheme for which negative concentrations have been formerly reported, plus two more recently developed methods which are applied here for the first time to the problem of anisotropic dispersion in heterogeneous porous media. The SPH schemes are tested under different degrees of dispersion anisotropy for both homogeneous and heterogeneous velocity fields. The results indicate that the newer SPH schemes can produce accurate results without negative concentrations while considering anisotropic dispersion, providing a valid alternative to simulate solute transport through heterogeneous domains., To Escola Tècnica Superior d’Enginyers de Camins, Canals i Ports de Barcelona for granting computational resources in the cluster Titani, which contributed to the results presented in this article. The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska - Curie grant agreement no. 814066 (Managed Aquifer Recharge Solutions Training Network – MARSoluT) and project GRADIENT (reference no. PID2021-127911OB-I00) from the Ministry of Science and Innovation of Spain ., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Practical guidance for improving pump-test based inference of hydraulic parameters in heterogeneous unconfined aquifers

  • Naderi, Mostafa
  • Sánchez Vila, Francisco Javier
  • Gupta, Hoshin Vijai
Hydrogeological modeling relies on scale estimates for relevant hydraulic parameters. To obtain these, pump test data are typically interpreted using methods derived for idealized conditions (such as a spatially homogeneous medium). For unconfined aquifers, interpretation is made challenging by the time-evolving phreatic surface that imposes strong non-linearities in the equations. This study uses numerical simulation to examine the nature of parameter estimates obtained for heterogeneous unconfined aquifers using Neuman-based solutions. Results show that the representative horizontal extent of the cone of depression stabilizes when its radius approaches/exceeds times the correlation length scale of aquifer heterogeneity. In practice, long pumping durations are needed to achieve this when length scales are large, presenting difficulties due to limited horizontal cone expansion caused by vertical leakage when vertical conductivity and specific yield are high. Further, the interpretation should properly account for observation well location. Estimates using data from wells beyond the horizontal representative extent align with arithmetic and geometric means, while those using wells from within the vertical representative extent deviate due to vertical and horizontal heterogeneities. Meanwhile, results obtained using wells from the “transition” zone are influenced by horizontal heterogeneity. The practical implications are that (a) Neuman-based estimates will only be reliable when the cone of depression approaches/exceeds the horizontal representative size, and (b) Observation wells should be located at appropriately representative distances. We recommend using a minimum of three strategically placed observation wells to ensure some degree of reliability when interpreting the results of pump tests in heterogeneous unconfined aquifers., M.N. is thankful for the support of the Institute for Advanced Studies in Basic Sciences (IASBS) of Zanjan, Iran. X. S‐V acknowledges the support of AGAURGeneralitat de Catalunya –Suport Grups de Recerca SGR609 and the Spanish Ministry of Science, Innovation and Universities, projects GRADIENT (PID2021‐127911OB‐I00) and HETMAR (PID2023‐148543OA‐I00)., Peer Reviewed, Postprint (published version)