Pasar al contenido principal

EVALUACION Y REHABILITACION INTELIGENTE DE FORJADOS DE VIGUETAS DE MADERA Y REVOLTONES DE LADRILLO DE EDIFICIOS HISTORICOS

PID2021-128152NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic risk assessment of historic timber flooring systems subjected to fire

  • Garcia-Castillo, Ester
  • Gernay, Thomas
  • Paya-Zaforteza, Ignacio
[EN] Structural fire analyses of historic buildings face significant uncertainties due to their age and the scarcity of specific fire safety guidelines in modern codes. Typical prescriptive approaches often result in interventions that compromise the aesthetic and cultural value of these structures. In contrast, probabilistic performance-based approaches address uncertainties and offer flexibility to achieve compliance with fire safety requirements while preserving built heritage. This study introduces a novel probabilistic methodology to assess the fire resistance of timber structures, demonstrated on historic timber jack arch flooring systems. Extensive numerical simulations were conducted to develop fire fragility functions and obtain reliability indices, incorporating variability in timber density, mechanical properties, strength reduction with temperature, and applied loads. Results indicate that many of the historic systems studied possess adequate fire safety. Applicable to any timber structure, this methodology allows case-specific analyses, promoting the rational conservation and design of heritage and contemporary timber systems., This article is part of the Project PID2021-128152NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The authors would also like to express their gratitude for the support provided to this research through the predoctoral grant FPU18/00726 funded by MICIU/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic characterisation of the density, bending strength, and stiffness of timber structural elements from historic buildings

  • Garcia-Castillo, Ester
  • Abián-Pérez, Miguel Angel
  • Paya-Zaforteza, Ignacio
[EN] This paper presents probabilistic models for the density, modulus of rupture, and modulus of elasticity of historic softwood structural elements based on non-destructive testing data. Several probability density functions were fitted to experimental results obtained from three species of the genus Pinus ¿Pinus sylvestris, Pinus nigra, and U.S. southern yellow pine¿ and compared with the probabilistic models recommended by the Joint Committee on Structural Safety (JCSS) for contemporary timber. The results reveal significant differences between the proposed and JCSS models, highlighting the need to account for both species and age (historic versus contemporary) when statistically characterising timber properties. The study confirms that well-preserved historic timber can retain mechanical properties comparable to those of modern wood. The proposed species-specific probability density functions provide a more accurate basis for the probabilistic analysis and reliability assessment of historic timber structures, supporting their preservation and the broader goals of cultural heritage conservation and sustainable construction., This article is part of the Project PID2021 128152NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU. The authors would also like to thank the Spanish Ministry of Science, Innovation and Universities for supporting this research through the PhD grant FPU18/00726 awarded to the first author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural health monitoring of ungraded timber beams using long-gauge fiber optic sensors

  • Paya-Zaforteza, Ignacio
  • Mansilla-Ruiz, Roberto
  • Norberto Neftali
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
[EN] This study investigates the use of long-gauge fiber optic sensors (FOS) for the structural health monitoring of a sawn fir timber beam under bending. The 3 m long beam was made from ungraded timber-i.e., wood not classified by standardized criteria. FOS were installed near a support and at mid-span to measure strains, from which stresses, neutral axis positions, deflections, and the beam's global modulus of elasticity were estimated. Experimental stresses were compared with theoretical values using two approaches: one assuming the neutral axis coincides with the geometric centroid, and another using its experimentally determined position. Mean absolute errors (MAE) between theoretical and FOS-based stress values remained below 1.3 MPa, demonstrating excellent agreement. Three sensor configurations were then tested to estimate the beam's deflections and global modulus of elasticity: FOS at mid-span only, FOS near-support only, and combined (FOS at mid-span and near supports). Deflections were calculated from strainderived curvatures using closed-form expressions and compared with LVDT measurements, yielding MAE values below 0.8 mm (span/3750). The combined configuration performed best, with a deflection MAE of 0.24 mm and a + 6.0 % deviation in estimated global modulus of elasticity relative to LVDT-based values. By validating stress estimates and demonstrating accurate, equation-based deflection evaluation and the indirect determination of stiffness through the global modulus of elasticity, the study confirms the potential of long-gauge FOS as the basis for long-term, multi-parameter, strain-based SHM strategies that can be extended beyond ungraded timber to other structural materials and applications., This article is part of the grant PID2021-128152NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU". The authors would also like to express their gratitude for the support provided to this research through the predoctoral grant PRE2022-103404, funded by MICIU/AEI/10.13039/501100011033 and by "ESF+". This grant was awarded to the second author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fire in heritage and historic buildings, a major challenge for the 21st century

  • Garcia-Castillo, Ester
  • Paya-Zaforteza, Ignacio
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[EN] Heritage and historic buildings possess an important architectural and cultural value which fire significantly threatens. However, current codes very rarely address the peculiarities of such buildings vis-à-vis fire hazards. Therefore, bringing these buildings into compliance with fire safety regulations while avoiding heritage loss is a great challenge. Within this context, this study provides a comprehensive overview of the current state of the art of research on fire in heritage and historic buildings. The analysis of the literature shows that, despite significant advances in research, the fire safety of historic buildings remains alarming, with important research gaps to be addressed. This study identifies these gaps, proposes future research areas, and provides a baseline for the search for solutions to achieve fire safety in heritage and historic buildings. Thus, this work promotes the conservation of these buildings, as well as rehabilitation over demolition and new construction, leading to a more sustainable construction., This article is part of the project PID2021-128152NB-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. The authors also would like to thank the Spanish Ministry of Science, Innovation and Universities for supporting this research through the PhD grant FPU18/00726 awarded to the first author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic Models for Temperature-Dependent Compressive and Tensile Strengths of Timber

  • Garcia-Castillo, Ester
  • Gernay, Thomas
  • Paya-Zaforteza, Ignacio
[EN] Reliable reduction factors for timber mechanical properties at elevated temperatures are needed to design timber structures for fire safety as well as to assess the safety of historic timber structures against fire hazards. In this paper, a compilation of the available data on the compressive and tensile strengths of timber at elevated temperatures is carried out. Then, a probabilistic modeling approach to predict the temperature-dependent reduction factors applicable to fire design is proposed. The collected data cover both solid and engineered timber at temperatures from 20°C to 300°C, with a variety of sample sizes, wood species, test protocols, and moisture content used in the experiments. The data revealed a large scatter in elevated temperature strengths, and a large conservativeness of the relationships of the current European standard, which is commonly used for the advanced design of timber structures under fire. To address this variability, multiple probability density functions were calibrated across the temperature range, quantifying the goodness of fit with statistical criteria. Two-parameter Weibull functions provided the best fit, and continuous temperature-dependent relationships were derived for the parameters of the distribution. The proposed probabilistic models can be implemented in a numerical code, facilitating their use in analytical and computational approaches, and can be applied to the probabilistic assessment of the structural performance and reliability of timber structures against fire., The authors wish to express their gratitude to the Spanish Ministry of Science, Innovation and Universities for supporting this research through Ph.D. Grant FPU18/00726 awarded to the first author, as well as to the Spanish Ministry of Science and Innovation for the funding provided through Project PID2021-128152NB-I00. The authors would also like to thank Professor Dr. M. Z. Naser for providing his database on timber properties at high temperatures, which includes part of the experimental data used in this paper. Finally, the authors would like to acknowledge Professor Dr. R. Qureshi and Professor Dr. S. Ni for sharing the code used to develop probabilistic models for temperature-dependent strength of steel and concrete. Funding for open access charge: Universitat Politecnica de Valencia.