Pasar al contenido principal

HACIA UNA IA FLEXIBLE Y CONFIABLE

PID2022-136436NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

A Generative multi-resolution pyramid and normal-conditioning 3D cloth draping

  • Laczkó, Hunor|||0000-0001-7934-9747
  • Madadi, Meysam|||0000-0002-7384-5712
  • Escalera, Sergio|||0000-0003-0617-8873
  • Gonzàlez, Jordi|||0000-0001-8033-0306
RGB cloth generation has been deeply studied in the related literature, however, 3D garment generation remains an open problem. In this paper, we build a conditional variational autoencoder for 3D garment generation and draping. We propose a pyramid network to add garment details progressively in a canonical space, i.e. unposing and unshaping the garments w.r.t. the body. We study conditioning the network on surface normal UV maps, as an intermediate representation, which is an easier problem to optimize than 3D coordinates. Our results on two public datasets, CLOTH3D and CAPE, show that our model is robust, controllable in terms of detail generation by the use of multi-resolution pyramids, and achieves state-of-the-art results that can highly generalize to unseen garments, poses, and shapes even when training with small amounts of data. The code can be found at: https://github.com/HunorLaczko/pyramid-drape.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Enhancing statistical chart accessibility for people with low vision: insights from a user test

  • Alcaraz Martínez, Rubén
  • Ribera, Mireia
  • Adeva‑Fillol, Adrià
  • Pascual Almenara, Afra
A remote user test was performed with two versions (one accessible and one non-accessible) of three types of web-based charts (horizontal bar chart, vertical stacked bar chart, and line chart). The objectives of the test were: (a) to validate a set of heuristic indicators for the evaluation of the accessibility of statistical charts presented in a previous work (Fariñas Falcón et al. in Mediocentro Electrónica 21(1):65–68, 2017); (b) to identify new barriers and preferences for users with low vision in the access and use of this content not previously contemplated. 12 users were tested, with a variety of conditions associated with low vision: low visual acuity (6 users), reduced central vision (2 users), reduced peripheral vision (2 users), blurry vision (1 user), sensitivity to light (3 users), Nystagmus (2 users) and color vision deficiency (CVD) (4 users). From a quantitative standpoint, accessible versions of charts were more efficient, effective, and satisfactory. From a qualitative point of view, results verify the relevance of heuristics H2, Legend; H3, Axes; H6, Data source (as data table); H10, Safe colors; H11, Contrast; H12, Legibility; H13, Image quality; H14, Resize; H16, Focus visible; H17, Independent navigation; related to the proposed tasks. As new observations, tooltips were highly valued by all users, but their implementation must be improved to avoid covering up significant parts of the charts when displayed. The data table has also been frequently used by all users, especially in the non-accessible versions, allowing them to carry out tasks more efficiently. The position and size of the legend can be a significant barrier if it is too small or appears in an unusual position. Finally, despite the limitations related to color perception, some users prefer color graphics to black and white, so, to target all profiles, it is necessary to redundantly encode categories with colors and patterns as well., This work was partially funded by Spanish project PID2022-141566NB-I00 (AEI-MICINN). This work also has been partially supported by the Spanish project PID2022-136436NB-I00 (AEI-MICINN)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

A transfer learning method in press hardening surrogate modeling: From simulations to real-world

  • Abio, Albert
  • Bonada, Francesc
  • Garcia-Llamas, Eduard
  • Grané, Marc
  • Nievas, Nuria
  • Lange, Danillo
  • Pujante, Jaume
  • Pujol, Oriol
The introduction of data-driven surrogate models is a powerful solution to obtain a representation of a manufacturing system, overcoming the limitations of finite element simulations regarding complexity and time. Usually, data acquisition in real manufacturing plants is a very expensive task, and finite element simulations are employed to train Machine Learning-based surrogate models. However, the approximations of the finite element models may induce a deviation from reality that is transferred to the surrogate models. This paper proposes a methodology to combine AI-based surrogate modeling and transfer learning to create a trustworthy and efficient surrogate model of a real manufacturing process, using a low-fidelity finite element model as a source. In particular, the methodology has been demonstrated in a study involving press hardening of boron steel sheet in a pilot plant. Two deep neural networks have been trained with low-fidelity ABAQUS simulations, forming a baseline surrogate model that predicts the key outputs of the process. The use of few experimental real data of the process to perform transfer learning and adapt the original baseline surrogate model to the real environment shows remarkable results, surpassing other Variable-Fidelity Modeling approaches. The final transfer learning surrogate model provides fast and good predictions of the most relevant outputs of the real process with little training, and it removes completely the calibration stage or the need of a high-fidelity simulation model. Additionally, the presented methodology can be a trigger for creating efficient virtual manufacturing environments that can enable developing digital twins or reinforcement learning agents for process optimization., Albert Abio is a fellow of the Eurecat Vicente López PhD Grant Program. This work is partially supported by MCIN/ AEI/ 10.13039 /501100011033/ under project PID2022-136436NB-I00.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing statistical chart accessibility for people with low vision: insights from a user test

  • Alcaraz Martínez, Rubén
  • Ribera, Mireia
  • Adeva‑Fillol, Adrià
  • Pascual Almenara, Afra
A remote user test was performed with two versions (one accessible and one non-accessible) of three types of web-based charts (horizontal bar chart, vertical stacked bar chart, and line chart). The objectives of the test were: (a) to validate a set of heuristic indicators for the evaluation of the accessibility of statistical charts presented in a previous work (Fariñas Falcón et al. in Mediocentro Electrónica 21(1):65–68, 2017); (b) to identify new barriers and preferences for users with low vision in the access and use of this content not previously contemplated. 12 users were tested, with a variety of conditions associated with low vision: low visual acuity (6 users), reduced central vision (2 users), reduced peripheral vision (2 users), blurry vision (1 user), sensitivity to light (3 users), Nystagmus (2 users) and color vision deficiency (CVD) (4 users). From a quantitative standpoint, accessible versions of charts were more efficient, effective, and satisfactory. From a qualitative point of view, results verify the relevance of heuristics H2, Legend; H3, Axes; H6, Data source (as data table); H10, Safe colors; H11, Contrast; H12, Legibility; H13, Image quality; H14, Resize; H16, Focus visible; H17, Independent navigation; related to the proposed tasks. As new observations, tooltips were highly valued by all users, but their implementation must be improved to avoid covering up significant parts of the charts when displayed. The data table has also been frequently used by all users, especially in the non-accessible versions, allowing them to carry out tasks more efficiently. The position and size of the legend can be a significant barrier if it is too small or appears in an unusual position. Finally, despite the limitations related to color perception, some users prefer color graphics to black and white, so, to target all profiles, it is necessary to redundantly encode categories with colors and patterns as well., This work was partially funded by Spanish project PID2022-141566NB-I00 (AEI-MICINN). This work also has been partially supported by the Spanish project PID2022-136436NB-I00 (AEI-MICINN)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A transfer learning method in press hardening surrogate modeling: From simulations to real-world

  • Abio, Albert
  • Bonada, Francesc
  • Garcia-Llamas, Eduard
  • Grané, Marc
  • Nievas, Nuria
  • Lange, Danillo
  • Pujante, Jaume
  • Pujol, Oriol
The introduction of data-driven surrogate models is a powerful solution to obtain a representation of a manufacturing system, overcoming the limitations of finite element simulations regarding complexity and time. Usually, data acquisition in real manufacturing plants is a very expensive task, and finite element simulations are employed to train Machine Learning-based surrogate models. However, the approximations of the finite element models may induce a deviation from reality that is transferred to the surrogate models. This paper proposes a methodology to combine AI-based surrogate modeling and transfer learning to create a trustworthy and efficient surrogate model of a real manufacturing process, using a low-fidelity finite element model as a source. In particular, the methodology has been demonstrated in a study involving press hardening of boron steel sheet in a pilot plant. Two deep neural networks have been trained with low-fidelity ABAQUS simulations, forming a baseline surrogate model that predicts the key outputs of the process. The use of few experimental real data of the process to perform transfer learning and adapt the original baseline surrogate model to the real environment shows remarkable results, surpassing other Variable-Fidelity Modeling approaches. The final transfer learning surrogate model provides fast and good predictions of the most relevant outputs of the real process with little training, and it removes completely the calibration stage or the need of a high-fidelity simulation model. Additionally, the presented methodology can be a trigger for creating efficient virtual manufacturing environments that can enable developing digital twins or reinforcement learning agents for process optimization., Albert Abio is a fellow of the Eurecat Vicente López PhD Grant Program. This work is partially supported by MCIN/ AEI/ 10.13039 /501100011033/ under project PID2022-136436NB-I00.