Pasar al contenido principal

ESTRUCTURAS DE AGUA LIQUIDA SOBRE SUPERFICIES DE PROTEINAS, MATERIALES BIDIMEMSIONALES Y DISPOSITIVOS

PID2022-136851NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacial water on collagen nanoribbons by 3D AFM

  • Arvelo, Diana M.
  • García-Sacristán, Clara
  • Chacón, Enrique
  • Tarazona, Pedro
  • García García, Ricardo
Collagen is the most abundant structural protein in mammals. Type I collagen in its fibril form has a characteristic pattern structure that alternates two regions called gap and overlap. The structure and properties of collagens are highly dependent on the water and mineral content of the environment. Here, we apply 3D AFM to characterize at angstrom-scale resolution the interfacial water structure of collagen nanoribbons. For a neutral tip, the interfacial water structure is characterized by the oscillation of the water particle density distribution with a value of 0.3 nm (hydration layers). The interfacial structure does not depend on the collagen region. For a negatively charged tip, the interfacial structure might depend on the collagen region. Hydration layers are observed in overlap regions, while in gap regions, the interfacial solvent structure is dominated by electrostatic interactions. These interactions generate interlayer distances of 0.2 nm., We acknowledge Ministerio de Ciencia e Innovación (Grant No. PID2022-136851NB-I00/AEI/10.13039/501100011033) (R.G.) and the Maria de Maeztu program (Grant No. CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Time-lapsed nanoscale maps of the elastic modulus of collagen during cross-linking by bimodal AFM

  • García-Sacristán, Clara
  • García García, Ricardo
Collagen is the most abundant structural protein in mammals. Collagen in tissues is exposed to cross-linking processes such as glycation which might cause progressive tissue stiffening. Tissue stiffening might be considered a landmark of aging. Yet a quantitative characterization of the elastic modulus of collagen nanofibers under different cross-linking processes and stages is not available. Bimodal AFM was applied to generate time-lapsed maps of Young's modulus of type I collagen nanoribbons under two cross-linking processes associated, respectively, with the presence of ribose and glutaraldehyde in the solution. Elastic modulus maps were acquired for different incubation times (0, 30 min, 12 h, 24 h and 1 week). The experiments were performed in liquid. The Young's modulus showed an initial sharp increase after an incubation time of 30 min, from a few MPa (native) to 100 MPa. From then onwards we measured a monotonic increase until a saturation value of about 2 GPa was reached after one week. We did not observe a dependence on the elastic modulus evolution using ribose versus glutaraldehyde. The saturation value was very similar to that measured on dry collagen nanoribbons., Financial support from the Ministerio de Ciencia, Innovación y Universidades (PID2022-136851NB-I00/AEI/10.13039/501100011033) and Comunidad de Madrid TEC-2024/TEC-158 (Tec4Nanobio-CM) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Nanorheology of Living Cells Powered by Supervised Machine Learning

  • Tejedor, Jaime R
  • García García, Ricardo
Atomic force microscopy (AFM) is extensively applied to measure the nanomechanical properties of living cells. Despite its popularity, some applications on mechanobiology are limited by the low throughput of the technique. Currently, the analysis of AFM-nanoindentation data is performed by model fitting. Model fitting is slow, data intensive, and prone to error. Herein, a supervised machine-learning regressor is developed for transforming AFM force-distance curves into nanorheological behavior. The method reduces the computational time required to process a force volume of a cell made of 2.62 × 105 curves from several hours to minutes. In fact, the regressor increases the throughput by 50-fold. The training and the validation of the regressor are performed by using theoretical curves derived from a contact mechanics model that combined power-law rheology with bottom effect corrections and functional data analysis. The regressor predicts the modulus and the fluidity coefficient of mammalian cells with a relative error below 4%., The author thanks Francisco M. Espinosa for useful discussions and infor-mation on AFM measurements on cells. Funding was received from Ministerio de Ciencia, Innovación y Universidades, grant PID2022-136851NB-I00/AEI/10.13039/501100011033 (RG), Comunidad deMadrid TEC-2024/TEC-158 (Tec4Nanobio-CM), and the EuropeanCommission (HORIZON-EIC-2022, project Piezo4Spine, No. 101098597), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of the bottom stiffness effect on atomic force microscopy-based cell mechanobiology

  • Moura, Afonso L. D.
  • Tejedor, Jaime R.
  • Espinosa, Francisco M.
  • Domínguez, Lázaro A
  • Sousa, Jeanlex S de
  • García García, Ricardo
AFM is the dominant method to characterize the nanomechanical properties of cells. These properties are obtained by model fitting. Semi-infinite contact mechanics models predict that the force depends on the cell's mechanical properties, indentation and the tip's geometry. Finite-thickness rheological models predict that the force should depend also on the rigidity of the substrate. The latter property has never been observed experimentally. It would make cells appear stiffer than they are. Here, we designed a force-distance curve experiment to reveal the influence of the rigidity of the substrate on the forces and the apparent moduli measured by AFM. Model fitting by using a semi-infinite power-law rheological model showed an increase of the apparent modulus with increasing force. This behavior was an artifact which disappeared when the force was fit with a bottom-effect correction model. Our findings demonstrated that the force applied on a cell depended intrinsically on the stiffness of the substrate while the mechanical properties (true values) did not., Financial support from the Ministerio de Ciencia e Innovación grant PID2022-136851NB-I00/AEI/10.13039/501100011033 and EUR2022-134029 (RG), Comunidad de Madrid TEC-2024/TEC-158 (Tec4Nanobio-CM) and the European Commission (HORIZON-EIC-2022, project Piezo4Spine, no. 101098597) is acknowledged. ALDM acknowledges support from the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in nanomechanical property mapping by atomic force microscopy

  • García García, Ricardo
  • Tejedor, Jaime R.
AFM-based mechanical property measurements are widely used in energy storage, polymer science, mechanobiology or nanomedicine. Mechanical properties are determined by expressing the experimental force in terms of a contact mechanics model. A nanomechanical map is generated by representing one or more mechanical parameters as a function of the tip's spatial coordinates. Force spectroscopy modes might be separated into two categories, adhesion and indentation. Here we describe the principles of AFM-based indentation modes to generate spatially resolved maps of the mechanical properties at the nanoscale. The review provides an update on the progress in nanomechanical mapping since 2019. The focus is on quantitative accuracy, spatial resolution, high-speed data acquisition, machine learning and viscoelastic property mapping. Two advanced applications which emerged from AFM-based indentation modes, nanomechanical tomography and volume imaging of solid-liquid interfaces, are also described., Financial support from the Ministerio de Ciencia, Innovación y Universidades (PID2022-136851NB-I00/AEI/10.13039/501100011033) and Comunidad de Madrid TEC-2024/TEC-158 (Tec4Nanobio-CM), the European Commission (HORIZON-EIC-2022, project Piezo4Spine, No. 101098597 and Horizon Europe MSCA Doctoral Network NANORAM, Grant No. 101120146)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular-Scale Resolution Mapping of Electrified MoS2–Water Interfaces by Operando 3D-AFM

  • Arvelo, Diana M.
  • García García, Ricardo
Understanding the interfacial water structure on electrified surfaces, in particular few-layer transition metal dichalcogenides MoS2, is relevant for advancing applications in biosensing, wearable electronics and catalysis. In this work, we implemented an operando 3D-AFM technique to probe the interfacial water layer structure on electrified surfaces with molecular-scale resolution. This method enabled us to study the interfacial hydration layer structure of MoS2 crystals under varying surface potential and electrochemical current density conditions. On pristine surfaces we observed the existence of two-to-four hydration layers. The interlayer distance (∼0.3 nm) was independent of the surface potential (−0.6 to 1.9 VSHE) and the current density. More hydration layers were observed at high positive potentials. Operando 3D-AFM compatibilized simultaneous current density and interfacial hydration layer structure measurements., Financial support from Ministerio de Ciencia e Innovación grants PID2022-136851NB-I00/AEI/10.13039/501100011033 and EUR2022-134029., Peer reviewed