DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
Assessment of hydrogen production from Sorption Enhanced Chemical Looping Reforming (SE-CLR) of methane
13 figures, 3 tables., The Paris Agreement in 2015 (COP21) [1] marks the way towards a Net Zero CO2 Emissions (NZE) scenery in order to limit the global temperature increase in this century to 2 °C while pursuing efforts to limit the increase to 1.5 °C above pre-industrial levels. In this scenery, greenhouse gas emissions must be reduced by 8% annually to achieve worldwide Net Zero by 2050 [2]. Additionally, these current climate and environmental challenges demand an urgent and ambitious response from Europe, which was recently defined in the European Green Deal [3] and European Climate Law [4]. The EU Climate Law writes into law the objective established in the European Green Deal referred to achieve the carbon neutrality by 2050. This law also sets the intermediate target of reducing net greenhouse gas emissions by at least 55% by 2030, compared to 1990 levels, turning the European Union into a leader in the global fight against Climate Change. To achieve that, higher shares of renewable energy are needed, with green hydrogen production being essential for decarbonizing parts of the economy that wind and solar are not able to do it, like high-heat industrial processes.
Currently, nearly all hydrogen comes from the conversion of fossil fuels, with the steam methane reforming (SMR) of natural gas being the most relevant (76%) [5]. In SMR, methane is converted into CO and hydrogen using a Ni-based catalyst (R1). Then, H2 yield is increased by the CO conversion in a water-gas shift (WGS) reactor (R2) and separated from the other gases, e.g. by means of pressure swing adsorption (PSA). SMR is an endothermic process that requires the energy supply by burning additional natural gas, which implies the generation of a significant amount of CO2 that is not captured and thus, it is released into the atmosphere. The implementation of measures to avoid these emissions, e.g. capturing CO2 in the combustion gases or partial oxidation with oxygen, is costly which directly impacts on hydrogen production costs.
An alternative to the SMR process is the Sorption Enhanced Steam Methane Reforming (SESMR) [6,7]. This process incorporates a CO2 sorbent together with the Ni catalyst so that the reforming (R1), the WGS reaction (R2) and the sorption of the CO2 generated during the process (R3) take place simultaneously in the reformer, improving the efficiency, conversion and yield to hydrogen. Once the sorbent is saturated in CO2, it is sent to a calciner reactor where it is regenerated (R4) releasing CO2. Therefore, a highly concentrated CO2 stream is obtained. Next, the regenerated sorbent is returned to the reformer to start over; see Figure 1a). In order to supply the energy needed for the process, a fraction of methane is burnt in oxy-fuel mode, i.e., using pure O2, so that CO2 can be captured and not emitted into the atmosphere. However, this process is associated with an increase in energy penalization because of the use of an Air Separation Unit (ASU).
CH4 + H2O → CO + 3 H2 ΔH0= 205.9 kJ/mol (R1)
CO + H2O ↔ CO2 + H2 ΔH0= -41.1 kJ/mol (R2)
CaO + CO2 → CaCO3 ΔH0= -178.2 kJ/mol (R3)
CaCO3 → CaO + CO2 ΔH0= 178.2 kJ/mol (R4), This work was supported by Gobierno de Aragón – Dpto. de Ciencia, Universidad y Sociedad del Conocimiento - Project LMP166_21 and by HYSERLOOP project, Grant PID2022-138085OB-I00 funded by MICIN/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed