Pasar al contenido principal

MICROFLUIDIC DEVICES IN FLEXIBLE AND ELASTIC MATERIALS FOR FLOW-GUIDED THERAPY

PID2022-138322OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Defining Operational Limits of Low-Cost MSLA 3D Printing for Microfluidic Systems: Resin Performance, Cell Compatibility, and Fluid Dynamics

  • Radziunas Salinas, Yago
  • Blanco Fernández, Bárbara
  • Valdiglesias, Vanessa
  • Flores Arias, María Teresa
  • Bao Varela, María del Carmen
  • Gómez Varela, Ana Isabel
Additive manufacturing using low-cost masked stereolithography technology is an attractive option to democratize microfluidic devices fabrication, albeit with limits in spatial resolution, optical transparency, cytotoxicity, and replication that need to be addressed. In this work, five transparent masked stereolithography resins employed in an Anycubic Photon M7 Pro low-cost printer are systematically studied to address the limitations mentioned above. The working route was based on the analysis of the dimensions of negative and positive microfeatures, their transmission spectra, their cytotoxicity, the capability of building internal channels, replicability in PDMS, and validation by computational fluid dynamics simulations with experimental fluid assays. Resolution tests revealed that negative structures resolved less accurately due to subtle resin accumulation during the layer-by-layer printing process. Internal channel fabrication showed a practical lower limit of approximately 500 μm under the printing and postprocessing conditions used in the study, with resin viscosity, printing angle, and drainage behavior strongly influencing channel clearance. The Standard V2 and High Clear resins exhibited the highest printing resolution with microchannels printed in a vertical or almost-vertical position. Regarding thermally cured PDMS replication, the Tough Ultra, ABS-like Pro 2, and Water-Wash were the ones exhibiting the most accurate outcome. From a biological point of view, all resins were non-cytotoxic, with Standard V2 and High Clear exhibiting the highest cell viability, in some cases better than the control scenario. Contact angle measurements indicated that the Standard V2 and High Clear resins are highly hydrophilic, whereas the remaining resins exhibit a hydrophobic behavior. Swelling was found to be dependent on the media, where the Water-Wash found high swelling in Milli-Q water and PBS and the Tough Ultra in ethanol. Samples were only minimally affected by isopropyl alcohol. Finally, fluid flow assays were conducted on three different microfluidic chips to demonstrate that the introduction of microfeatures and zigzag architectures fosters the disruption of laminar flow conditions by introducing secondary flows and vorticity to mimic more physiological environments. These experiments were contrasted with simulations performed by computational fluid dynamics. It was verified that microfeatures can be adequately implemented in the chip architecture and result in enhanced mixing. This validation allowed defining a practical operating window for MSLA 3D printers for microfluidics.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Optimization of the Yacovino maneuver for superior canal BPPV using numerical simulations

  • Arán Tapia, Ismael
  • Bastos Costas, Guillermo
  • Pérez Muñuzuri, Alberto
We evaluated the effectiveness of the original Yacovino maneuver (YM) for treating superior canal benign paroxysmal positional vertigo (SC-BPPV) using numerical simulations and proposed modifications to enhance its efficacy. A high-resolution three-dimensional micro-computed tomography (μCT) reconstruction of a human membranous labyrinth was used to simulate the BPPV condition. Endolymphatic fluid dynamics were modeled by solving the Navier–Stokes equations, and otoconia of varying sizes (3–30 µm) were introduced as Lagrangian particles. Their displacement was tracked using a superior canal-centric polar coordinate system. Two maneuver protocols were simulated: the original YM and a modified version with adjusted rotational angles and a 30-second resting interval per step. The original YM resulted in otoconia trapping in the ampulla and canal switching, limiting its effectiveness. In contrast, the modified YM—in which the patient lies face down with a 50° head flexion in the initial step, followed by optimized subsequent rotations—significantly improved otoconia migration toward the utricular macula. Longer resting times further enhanced the displacement of smaller particles without compromising maneuver safety. These findings suggest that the modified YM is a safe and effective alternative for SC-BPPV treatment. Tailoring rotation angles based on anatomical variability may improve outcomes, though clinical validation is still required.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Thermoregulable Magnetic Microfluidic Devices by Magnetic Hyperthermia from Iron Oxide Nanoparticles

  • Paramés Estévez, Santiago
  • García Acevedo, Pelayo
  • Radziunas-Salinas, Yago
  • Piñeiro Redondo, Yolanda
  • Rivas Rey, José
  • Flores Arias, María Teresa
  • Pérez Muñuzuri, Alberto
Accurate control of energy supplied to a liquid in a controlled environment is essential for automating and optimizing processes. Organs on a chip (OoC) are an emerging technology that allows the design of customized environmental conditions for cells and chemical reactions by creating specific channel shapes while simplifying data acquisition. To thermoregulate these devices and therefore expand their use widely, we integrated iron oxide nanoparticles (IONPs) within the matrix of the chip to heat them by using magnetic hyperthermia. We tested the devices and developed a digital twin that reproduces the experimental OoC-fluid interaction while allowing us to measure parameters that would be inaccessible in a laboratory and get a full picture of the heat transfer at the boundary.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Analysing macroscopic traffic rhythms and city size in affluent cities: insights from a global panel data of 25 cities

  • Saavedra López, Martín
  • Pérez Muñuzuri, Alberto
  • Menéndez, Mónica
  • Balsa Barreiro, José
The world is undergoing a rapid process of urbanization. Currently, it is estimated that over 55% of the global population resides in urban areas, a figure projected to reach nearly 70% by 2050. This trend is accompanied by a spatial reorganization of human activities on a global scale, bringing about significant changes in mobility patterns and urban traffic management capabilities. Consequently, it is imperative to evaluate, on a broad scale, how city size influences traffic capacity. This study aims to analyse on-road traffic patterns using a diverse dataset comprising cities of varying population sizes, geographical extents and global locations. Specifically, we conduct an analysis encompassing 25 cities primarily situated in several European countries (France, Italy, Germany, Spain, Switzerland, and the United Kingdom), as well as in North America (Canada) and East Asia (Japan and Taiwan). Our findings shed light on how physical aspects related to urban form influence mobility patterns, offering insights for the implementation of more effective and sustainable traffic management policies.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Laser-Assisted Micropatterned 3D Printed Scaffolds with Customizable Surface Topography and Porosity for Modulation of Cell Function

  • Aboal-Castro, Lucía
  • Radziunas-Salinas, Yago
  • Pita-Vilar, María
  • Carnero Groba, Bastián
  • Mikos, Antonios G.
  • Álvarez Lorenzo, Carmen
  • Flores Arias, María Teresa
  • Díaz Gómez, Luis
The dynamic interaction between cells and their substrate is a cornerstone of biomaterial-based tissue regeneration focused on unraveling the complex factors that govern this crucial relationship. A key challenge is translating physical cues from 2D to 3D due to limitations in current biofabrication techniques. In response, this study introduces an innovative approach that combines additive and subtractive manufacturing for precise surface patterning of 3D printed scaffolds. Using poly(𝜀-caprolactone) as the scaffold material, polymeric fibers are 3D printed and subsequently laser-engraved with femtosecond laser to precisely create controlled microtopographies, including microgrooves (10 and 80 µm in width) and micropits (25 µm in diameter). Testing shows that the process does not compromise the mechanical properties of the fibers, which is critical for structural applications in tissue engineering. Human mesenchymal stem cells are used to investigate the effects of these topographical features on cell behavior. The 10 µm wide microgrooves notably enhance cell attachment, with cells aligning in elongated forms along the grooves, while micropits and unpatterned surfaces promote polygonal cell shapes. This combined approach demonstrates that precisely engineered microtopographies on 3D printed scaffolds can better mimic the natural extracellular matrix, improving cellular responses and offering a promising strategy for advancing tissue regeneration.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Versatile hybrid technique for passive straight micromixer manufacturing by combining pulsed laser ablation, stereolithographic 3D printing and computational fluid dynamics

  • Carnero Groba, Bastián
  • Radziunas-Salinas, Yago
  • Rodiño Janeiro, Bruno Kotska
  • Varela Ballesta, Sylvana
  • Flores Arias, María Teresa
There is a need to develop new and versatile fabrication methods to achieve efficient mixing of fluids in microfluidic channels using microstructures. This work presents a new technique that combines stereolithography (SLA) and pulsed laser ablation (PLA) to manufacture a straight micromixer for uniform mixing of two samples. Computational fluid dynamics (CFD) simulation is performed to deeply understand the physical mechanisms of the process. The results suggest that this new optical technique holds the potential to become a versatile hybrid technique for manufacturing remarkable mixing microfluidic devices.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Unsupervised clustering based coronary artery segmentation

  • Serrano Antón, Belén
  • Insúa Villa, Manuel
  • Pendón-Minguillón, Santiago
  • Paramés Estévez, Santiago
  • Otero Cacho, Alberto
  • López Otero, Diego
  • Díaz Fernández, Brais
  • Bastos-Fernández, María
  • González Juanatey, José Ramón
  • Pérez Muñuzuri, Alberto
Background: The acquisition of 3D geometries of coronary arteries from computed tomography coronary angiography (CTCA) is crucial for clinicians, enabling visualization of lesions and supporting decision-making processes. Manual segmentation of coronary arteries is time-consuming and prone to errors. There is growing interest in automatic segmentation algorithms, particularly those based on neural networks, which require large datasets and significant computational resources for training. This paper proposes an automatic segmentation methodology based on clustering algorithms and a graph structure, which integrates data from both the clustering process and the original images. Results: The study compares two approaches: a 2.5D version using axial, sagittal, and coronal slices (3Axis), and a perpendicular version (Perp), which uses the cross-section of each vessel. The methodology was tested on two patient groups: a test set of 10 patients and an additional set of 22 patients with clinically diagnosed lesions. The 3Axis method achieved a Dice score of 0.88 in the test set and 0.83 in the lesion set, while the Perp method obtained Dice scores of 0.81 in the test set and 0.82 in the lesion set, decreasing to 0.79 and 0.80 in the lesion region, respectively. These results are competitive with current state-of-the-art methods. Conclusions: This clustering-based segmentation approach offers a robust framework that can be easily integrated into clinical workflows, improving both accuracy and efficiency in coronary artery analysis. Additionally, the ability to visualize clusters and graphs from any cross-section enhances the method’s explainability, providing clinicians with deeper insights into vascular structures. The study demonstrates the potential of clustering algorithms for improving segmentation performance in coronary artery imaging.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Contrast-enhanced computed tomography to measure aortic calcium volume score

  • Serrano Antón, Belén
  • Otero Cacho, Alberto
  • López Otero, Diego
  • Díaz Fernández, Brais
  • Bastos Fernández, María
  • González Juanatey, José Ramón
  • Pérez Muñuzuri, Alberto
Background: In clinical practice, calcium scoring is typically measured only in the aortic valve region. However, calcium accumulation in other areas, such as the aortic arch, can pose risks during transcatheter aortic valve implantation (TAVI). Dislodged plaque due to catheter manipulation may lead to cerebrovascular events. Establishing a method to assess calcium distribution in these regions could help to determine when protective measures in the carotid arteries are necessary. Objective: This study aims to validate a calcium segmentation technique in contrast-enhanced CT angiography (CTA) and establish a method for regional calcium quantification, as no standardized approach currently exists. Additionally, it assesses the correlation and reproducibility of calcium scores obtained from unenhanced and contrast-enhanced CT images using the Agatston method and calcium volume to validate the proposed methodology. Methods: A dataset of 55 patients with both contrast-enhanced and unenhanced images was used, where calcium was segmented and scores were calculated for each image type. Notably, the threshold for the segmentation method in contrast-enhanced images was found to be image-dependent. Additionally, contrast-enhanced images were reconstructed to ensure the same spacing between slices as their non-contrast counterparts. Results: The results showed high Pearson r2 correlation values (0.87 and 0.89) between calcium scores in contrast-enhanced and unenhanced images for the Agatston and volume metrics, respectively, although the Agatston method exhibited greater variability. Additionally, calcium volume in various aortic regions was calculated, with the arch showing the most significant accumulation of calcium. Conclusion: This study demonstrates the feasibility of using calcium scoring in contrast-enhanced imaging with an image-dependent threshold. Furthermore, assessing calcium in other aortic regions is proposed as a risk factor prior to TAVI intervention
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Influence of the pressure wire on the fractional flow reserve calculation: CFD analysis of an ideal vessel and clinical patients with stenosis

  • Otero Cacho, Alberto
  • Insúa Villa, Manuel
  • López Otero, Diego
  • Díaz Fernández, Brais
  • Bastos-Fernández, María
  • Pérez Muñuzuri, Vicente
  • Pérez Muñuzuri, Alberto
  • González Juanatey, José Ramón
Background and objective Fractional Flow Reserve (FFR) is generally considered the gold standard in hemodynamics to assess the impact of a stenosis on the blood flow. The standard procedure to measure involves the displacement of a pressure guide along the circulatory system until it is placed next to the lesion to be analyzed. The main objective of the present study is to analyze the influence of the pressure guide on the invasive FFR measurements and its implications in clinical practice. Methods We studied the influence of pressure wires on the measurement of Fractional Flow Reserve (FFR) through a combination of Computational Fluid Dynamics (CFD) simulations using 45 clinical patient data with 58 lesions and ideal geometries. The analysis is conducted considering patients that were subjected to a computer tomography and also have direct measurements using a pressure guide. Influence of the stenosis severity, degree of occlusion and blood viscosity has also been studied. Results The influence of pressure wires specifically affects severe stenosis with a lumen diameter reduction of 50 % or greater. This type of stenosis leads to reduced hyperemic flow and increased coronary pressure drop. Thus, we identified that the placement of wires during FFR measurements results in partial obstruction of the coronary artery lumen, leading to increased pressure drop and subsequent reduction in blood flow. The severity of low FFR values associated with severe stenosis may be prone to overestimation when compared to stenosis without severe narrowing. These results have practical implications, particularly in the interpretation of lesions falling within the “gray zone” (0,75−0,80). Conclusions The pressure wire's presence significantly alters the flow on severe lesions, which has an impact on the FFR calculation. In contrast, the impact of the pressure wire appears to be reduced when the FFR is larger than 0.8. The findings provide critical information for physicians, emphasizing the need for cautious interpretation of FFR values, particularly in severe stenosis. It also offers insights into improving the correlation between FFRct models and invasive measurements by incorporating the influence of pressure wires.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Custom Automatic Segmentation Models for Medicine and Biology based on FastSAM

  • Paramés-Estévez, Santiago
  • Pérez-Dones, Diego
  • Rego-Pérez, Ignacio
  • Oreiro-Villar, Natividad
  • Blanco, Francisco J.
  • Pardiñas, Javier Roca
  • Pazó, Germán González
  • Míguez, David G
  • Muñuzuri, Alberto P.
FastSAM, a public image segmentation model trained on everyday images, is used to achieve a customizable and state-of-the-art segmentation model minimizing the training in two completely different scenarios. In one example we consider macroscopic X-ray images of the knee area. In the second example, images were acquired by microscopy of the volumetric zebrafish embryo retina with a much smaller spatial scale. In both cases, we analyze the minimum set of images required to segmentate keeping the state-of-the-art standards. The effect of filters on the pictures and the specificities of considering a 3D volume for the retina images are also analyzed., We acknowledge financial support under grant PID2022-138322OB-100 funded by MCIN/AEI/ and by “ERDF A way of making Europe”. Also, Xunta de Galicia funded this research under Research Grant No. 2021-PG036. We also acknowledge the research network RED2022-134573-T as well, funded by Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033) and by ‘ERDF: A way of making Europe’, by the European Union. And finally; the project PMPTA22/00115 DEL ISCIII, MADRID SPAIN., Peer reviewed