DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
Enhancing solar cell efficiency of AlxIn1-xN/Si heterojunctions using an a-Si buffer: A study of material, interface and device properties
This study explores the impact of an optimized amorphous silicon (a-Si) buffer layer on AlxIn1-xN-on-Si(100) heterojunction solar cells, with Al content varying from 0% (InN) to 55%. The buffer layer improves the structural quality of the AlInN layer, as evidenced by reduced full width at half maximum values in X-ray diffraction rocking curves around the AlInN (0002) peak. Atomic force microscopy reveals that the buffer layer does not alter surface roughness. The effectiveness of the a-Si buffer is demonstrated by an enhancement of the conversion efficiency under AM1.5G illumination from 3.3 % to 3.9 % for devices with 35 % Al. Looking at the effect of the Al content in devices with the a-Si buffer, the device with 22% Al shows the best photovoltaic performance, with a conversion efficiency of 4.1 % and a VOC of 0.42 V, JSC of 15.4 mA/cm², and FF of 63.3%. However, performance declines for Al contents above 36% due to increased resistivity and reduced carrier concentration. These findings highlight the critical role of the novel a-Si buffer layer developed by RF-sputtering and the Al content in optimizing AlInN/Si heterojunction solar cell performance., Partial financial support was provided by projects SINFOTON2-CM (P2018/NMT-4326), GRISA (CM/JIN/2021-021) and CAM-project (EPU-DPTO/2020/012). This research was also funded by MCIN/AEI/10.13039/501100011033, grant number PID2022-138434OB-C53, and project PIUAH24/IA-053, from University of Alcalá., Peer reviewed
DOI: http://hdl.handle.net/10261/399383, https://api.elsevier.com/content/abstract/scopus_id/105012551030
HANDLE: http://hdl.handle.net/10261/399383, https://api.elsevier.com/content/abstract/scopus_id/105012551030