Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

A Visual Odometry Artificial Intelligence‐Based Method For Trajectory Learning And Tracking Applied To Mobile Robots

  • Pirozzo, Bernardo Manuel
  • De Paula, Mariano
  • Villar, Sebastián Aldo
  • De Benito, Carola
  • Acosta, Gerardo Gabriel
  • Picos, Rodrigo
[eng] Autonomous systems have demonstrated high performance in several applications. One of the most important is localization systems, which are necessary for the safe navigation of autonomous cars or mobile robots. However, despite significant advances in this field, there are still areas open for research and improvement. Two of the most important challenges include the precise traversal of a bounded route and emergencies arising from the breakdown or failure of one or more sensors, which can lead to malfunction or system localization failure. To address these issues, auxiliary assistance systems are necessary, enabling localization for a safe return to the starting point, completing the trajectory, or facilitating an emergency stop in a designated area for such situations. Motivated by the exploration of applying Artificial Intelligence to pose estimation in a navigation system, this article introduces a Monocular Visual Odometry method that, through Teach and Repeat, learns and autonomously replicates trajectories. Our proposal can serve as either a primary localization system or an auxiliary assistance system. In the first case, our approach is applicable in scenarios where the traversing route remains unchanged. In the second case, the goal is to achieve a safe return to the starting point or to reach the end point of the trajectory. We initially utilized a publicly available dataset to showcase the learning capability and robustness under different visibility conditions to validate our proposal. Subsequently, we compared our approach with other well‐known methods to assess performance metrics. Finally, we evaluated real‐time trajectory replication on a ground robot, both simulated and real, across multiple trajectories of increasing complexity.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Development of a Lightweight Secure Communication System for UAVs Enhanced by an Unconventional Chaotic Communication Architecture

  • Souli, Nicolas
  • Stavrinides, Stavros G.
  • Picos, Rodrigo
  • Karatzia, Maria
  • Kolios, Panayiotis
  • Ellinas, Georgios
[eng] Ensuring the confidentiality, integrity and authenticity of transmitted data for single- and multi-agent systems is becoming crucial to protect these systems against potential threats. This is precisely the focus of this work that introduces a novel approach for securing communications between unmanned aerial vehicles (UAVs). In particular, to safeguard the data against attacks in UAV networks, implemented for military-grade or critical infrastructure operation scenarios, different security techniques are combined, including the employment of a chaotic synchronization-based communications architecture. The proposed chaotic-synchronized, secure communications system (UAV-CSCS) is applied onboard a UAV and comprised of three layers, namely a VPN server (initial security layer), a custom ROS-based framework (data collection and distribution layer), and a lightweight chaotic communications module (secondary security layer). UAV-CSCS’s main component is a transmitter-receiver communication architecture based on chaotic synchronization that successfully encodes and decodes information over a chaotic signal, enabling secure information exchange between agents. To validate the effectiveness of the proposed system, a prototype is designed, developed, and thoroughly tested in real-world multi-UAV experiments. The results demonstrate secure, real-time communication with low-power consumption and minimal resource allocation (in terms of CPU and RAM), validating the system’s efficiency and applicability.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Quantitative measures of stochastic resonance effect based on switch-phase distribution

  • Korneta, Wojciech
  • Silva, Iacyel G.
  • Stavrinides, Stavros G.
  • Picos, Rodrigo
  • Chua, Leon O.
[eng] Stochastic resonance (SR) effect observed in biological, physical, and engineering systems is commonly described quantitatively by power spectral measures that require complex mathematical operations and long, continuous observation. Here, we propose two measures based on the switch-phase distribution to qualitatively describe the SR effect, namely, the power norm and the probability that the switch phase lies within a specific range around the peak of the switch-phase distribution. They are easy to be practically determined from a single long run or from multiple short runs. Further, theses metrics were used to quantitatively describe the SR effect observed experimentally in Chua’s circuit, operating in chaotic single-scroll regime, forced by 1 kHz sinusoidal subthreshold internal electric or external magnetic signal with switches between attractors induced by internal electric Gaussian noise. The dependence of the switch-phase distributions on the noise intensity for two types of oriented switches are presented. The proposed measures give the optimal noise level as obtained with the widely used signal-to-noise ratio (SNR) measure. The dependence of the first measure on the noise intensity is the same as the SNR dependence. The second measure decreases with increasing noise intensity and has an inflection point at the optimal noise intensity, being almost linear in the vicinity of this point. This dependence on the noise intensity hints for many potential applications, e.g., to aperiodic signal coding and decoding. Both measures are particularly useful for adaptive stochastic resonance and parallel processing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SPICE simulation of the time-dependent clustering model for dielectric breakdown

  • Salvador Aguilera, Emili|||0000-0002-1613-6784
  • Rodriguez, R.|||0000-0002-4565-6703
  • Miranda, E.|||0000-0003-0470-5318
In this letter, a method for dealing with the time-dependent dielectric breakdown (TDDB) of oxide layers in MOS and MIM structures in the framework of SPICE simulations is reported. In particular, we focus the attention on the clustering model (Burr's XII distribution) for dielectric breakdown which can be considered an extension of the well known Weibull model. The oxide time-to-breakdown for both models is calculated using the inversion method for the cumulative distribution function. For the sake of completeness, the proposed approach includes uncorrelated variability both in the initial and final resistance states. For illustrative purposes, it is also shown how voltage acceleration, progressive breakdown or any other correlation factor can be introduced in the simulation parameters. As an application example, the proposed method is used to simulate the simplest case of a gate-to-drain dielectric breakdown of a NMOS-based inverter circuit.