Pasar al contenido principal

ESPECIACION Y DISPONIBILIDAD DE CONTAMINANTES Y NUTRIENTES EN AGUAS Y SUELOS CON TECNICAS AVANZADAS (SACAT)

PID2022-140312NB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

The Role of Photooxidation and Organic Matter in CR(III) and CR(VI) Interactions With Poly(Lactic Acid) Microplastics in Aqueous Solution

  • Pedroza, Ricardo H. P.
  • David, C. A.
  • Barriada, José Luis
  • Rey-Castro, Carlos
  • Lodeiro, Pablo
[Abstract] There is limited research on the influence of environmental variables on the interactions of biodegradable microplastics with chromium. This study reports the results of adsorption experiments with Cr and poly(lactic acid) (PLA) in synthetic aqueous solutions. It addresses the influence of the initial oxidation state, Cr(III) or Cr(VI), the effects of UV irradiation and the presence of organic matter. The results indicate that pristine PLA has a low affinity for Cr (between 0.05 and 46 μg/g) across varying pH levels, ionic strengths, and microplastic concentrations. However, the presence of organic matter (OM), represented by humic and tannic acids, resulted in 5.2-fold and 620-fold increases for Cr(III) and Cr(VI) adsorption, respectively. Possible mechanisms for that behavior are discussed, including Cr-OM complexation and formation of surface coatings. Noteworthy, we demonstrate that Cr(VI) adsorption involves a coupled redox-complexation process that appears to be related to the antioxidant potential of OM. Indeed, the ratio of (poly)phenol content of tannic and humic acids (6.23) is consistent with the ratio of Cr(VI) reduction in presence of both acids (6.97). Finally, photooxidation of PLA enhanced Cr(III) and Cr(VI) adsorption by a factor of 60 and 15, respectively. This is primarily attributed to UV-induced changes in surface chemical groups (increased oxygen content), rather than a change in surface area. This research provides key insights into the behavior of PLA as a potential Cr carrier, revealing the importance of organic matter and the photoaging of microplastics in the mobility of trace metal pollutants in the environment., This project has received funding from the European Union's H2020 research and innovation programme under Marie Sklodowska-Curie grant agreement N° 801586. The authors thank Agencia Española de Investigación for the financial support through the research project MCIN/AEI/10.13039/501100011033 (grant numbers PID2019-107033GB-C21, PID2020-117910GB-C21, and PID2022-140312NB-C21). P. Lodeiro also acknowledges current support by the Ministerio de Ciencia, Innovación y Universidades of Spain, and University of Lleida (Beatriz Galindo Senior award number BG20/00104)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

How much analyte is removed from the electrode in Stripping ChronoPotentiometry? The depletion factor

  • Monteiro, Adnívia S.C.
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Several electroanalytical techniques (such as Absence of Gradients and Nernstian Equilibrium Stripping, AGNES) need to quantify the amount of reduced analyte (M0) pre-concentrated in a mercury electrode. Among the used means for this quantification, Stripping ChronoPotentiometry, SCP, also known as Potentiometric Stripping Analysis (PSA), yields the time (τ) during which a constant total stripping current can progressively empty M0 from the electrode. The depletion factor (fd) is defined as the fraction of the total analyte that is depleted while the attainment of the constant total stripping current is possible. Full depletion only corresponds to the limiting case fd = 1. For (hemi)spherical electrodes, an analytical expression for fd is derived, which depends on the transition time τ, the electrode radius and the diffusion coefficient (but not explicitly on the total stripping current or the total charge). The theoretical expectations have been experimentally checked here with the Hanging Mercury Drop Electrode (HMDE) and the Thin Mercury Film Rotating Disc Electrode (TMF-RDE) for zinc and indium as analyte metals. In the case of the smallest drop in HMDE, for accurate total charge determinations, it is recommended to work with transition times longer than 5 s. In HMDE drops, the direct use of short transition times as analytical signals directly proportional to the free metal ion concentrations (in AGNES) might be inaccurate. Computing the charge with the depletion factor would be essential in such cases., Support from the Spanish Ministry of Science and Innovation (Projects PID2019-107033GB, PID2020-117910GB-C21 and PID2022-140312NB-C21 funded by MCIN/AEI/10.13039/501100011033) and from María Zambrano scholarship to ASCM (Ministerio de Universidades, Spain, funded by the European Union-NextGenerationEU)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Release of indium from In2O3 nanoparticles in model solutions and synthetic seawater

  • Rosales Segovia, Kevin
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Indium oxide (In2O3) nanoparticles (NPs) are used in electronic devices, from which indium (as its nanoparticulate form or as other generated chemical species) can be released to natural waters. To assess for the impacts of such releases (e.g. toxic effects), information on the kinetics and thermodynamics of the In2O3 dissolution processes is key. In this work, the evolution with time of the dissolution process was followed with the technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) by measuring the free indium concentration ([In3+]). AGNES can determine the free ion concentration in the presence of nanoparticles without a prior separation step, as shown in the case of ZnO nanoparticles, a procedure that is more accurate than the typical sequence of centrifugation+filtration+elemental analysis. Excess of indium oxide NPs were dispersed in 0.1 mol L−1 KNO3 at various pH values ranging from 2 to 8. Additional dispersions with bulk In2O3 at pH 3 or NPs in synthetic seawater at pH 8 were also prepared. The temperature was carefully fixed at 25 °C. The dispersions were continuously stirred and samples were taken from time to time to measure free indium concentration with AGNES. 180-day contact of In2O3 to solutions at pH 2 and 3 was not enough to reach equilibrium. The dissolution of the NPs at pH 3 was faster than that of the bulk (i.e. non nanoparticulate) material. Equilibrium of the NPs with the solution was reached at pH 4 and 5 in KNO3 and at pH 8 in seawater, in shorter times for higher pH values, with free indium concentrations decreasing by a factor of 1000 for each increase in one pH unit. The solubility products of In(OH)3 and In2O3 were compared. Equilibration of NPs with synthetic seawater took <18 days, with an average free [In3+] (up to 196 days) of 1.03 amol L−1., The authors gratefully acknowledge support for this research from the Spanish Ministry of Science and Innovation (Projects PID2019- 107033GB-C21, PID2020-117910GB-C21 and PID2022-140312NBC21) funded by MCIN/AEI/10.13039/501100011033 and Kevin Rosales-Segovia acknowledges to Generalitat de Catalunya for his FISDUR grant. The support of Nicola Capuano in measuring In in the dispersions and the expertise of Mireia Oromí with the Raman measurements are acknowledged. Preliminary results obtained in collaboration with M.H. Tehrani, P. Pla-Vilanova, E. Rotureau and J.P. Pinheiro are also acknowledged.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Interactions of humic acid with pristine poly (lactic acid) microplastics in aqueous solution

  • Pedroza, Ricardo H.P.
  • David, Calin
  • Lodeiro, Pablo
  • Rey-Castro, Carlos
Microplastics and natural organic matter are present in the aquatic environment and their reciprocal interaction plays important roles in the transport and behavior of nutrients and contaminants. Nevertheless, we lack mechanistic understanding on these interactions, especially in the case of biodegradable plastics. Here we investigate the adsorption of a commercial humic acid onto poly (lactic acid) (PLA) microplastics in aqueous solution. While the pseudo-second order kinetic model provided a more accurate representation of the adsorption kinetics, the Elovich model also produced a good fit, suggesting that chemisorption may be the rate-limiting step. The equilibrium data was better fit by the Langmuir model, that provided a maximum adsorption capacity of 0.118 ± 0.006 mg·g−1. The obtained values for the separation factor (RL) and free energy (E) suggest that adsorption of humic acid onto PLA is controlled by physisorption. We studied the effects of pH, ionic strength, and PLA concentration on the adsorption of humic acid onto PLA and demonstrated that electrostatic interactions and aggregation are important. The humic acid was characterized by Fourier-transform infrared (FTIR) spectroscopy, excitation-emission matrix (EEM) fluorescence spectroscopy, and parallel factor analysis (PARAFAC), before and after interacting with PLA. This set of analyses demonstrated that PLA caused alterations in the molecular structure of humic acid, primarily attributed to modifications in hydrogen bonding and hydrophobic interactions. Therefore, we hypothesize that the carboxylic groups of humic acid formed dimers in contact with PLA. This study provides new insights into the interactions between organic matter and a biodegradable microplastic in aqueous systems., This Project has received funding from the European Union's H2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No 801586. The authors gratefully acknowledge support by MCIN/AEI/10.13039/501100011033 [grant numbers PID2019- 107033GB-C21, PID2020-117910GB-C21 and PID2022-140312NBC21]. The authors thank A. Hernandez ´ Jim´enez and J.C. Alves Macedo for their help with fluorescence measurements. P. Lodeiro also acknowledges current support by the Ministerio de Ciencia, Innovación y Universidades of Spain, and University of Lleida [Beatriz Galindo Senior award number BG20/00104].
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interactions of humic acid with pristine poly (lactic acid) microplastics in aqueous solution

  • Pedroza, Ricardo H.P.
  • David, Calin
  • Lodeiro, Pablo
  • Rey-Castro, Carlos
Microplastics and natural organic matter are present in the aquatic environment and their reciprocal interaction plays important roles in the transport and behavior of nutrients and contaminants. Nevertheless, we lack mechanistic understanding on these interactions, especially in the case of biodegradable plastics. Here we investigate the adsorption of a commercial humic acid onto poly (lactic acid) (PLA) microplastics in aqueous solution. While the pseudo-second order kinetic model provided a more accurate representation of the adsorption kinetics, the Elovich model also produced a good fit, suggesting that chemisorption may be the rate-limiting step. The equilibrium data was better fit by the Langmuir model, that provided a maximum adsorption capacity of 0.118 ± 0.006 mg·g−1. The obtained values for the separation factor (RL) and free energy (E) suggest that adsorption of humic acid onto PLA is controlled by physisorption. We studied the effects of pH, ionic strength, and PLA concentration on the adsorption of humic acid onto PLA and demonstrated that electrostatic interactions and aggregation are important. The humic acid was characterized by Fourier-transform infrared (FTIR) spectroscopy, excitation-emission matrix (EEM) fluorescence spectroscopy, and parallel factor analysis (PARAFAC), before and after interacting with PLA. This set of analyses demonstrated that PLA caused alterations in the molecular structure of humic acid, primarily attributed to modifications in hydrogen bonding and hydrophobic interactions. Therefore, we hypothesize that the carboxylic groups of humic acid formed dimers in contact with PLA. This study provides new insights into the interactions between organic matter and a biodegradable microplastic in aqueous systems., This Project has received funding from the European Union's H2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No 801586. The authors gratefully acknowledge support by MCIN/AEI/10.13039/501100011033 [grant numbers PID2019- 107033GB-C21, PID2020-117910GB-C21 and PID2022-140312NBC21]. The authors thank A. Hernandez ´ Jim´enez and J.C. Alves Macedo for their help with fluorescence measurements. P. Lodeiro also acknowledges current support by the Ministerio de Ciencia, Innovación y Universidades of Spain, and University of Lleida [Beatriz Galindo Senior award number BG20/00104].
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

How much analyte is removed from the electrode in Stripping ChronoPotentiometry? The depletion factor

  • Monteiro, Adnívia S.C.
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Several electroanalytical techniques (such as Absence of Gradients and Nernstian Equilibrium Stripping, AGNES) need to quantify the amount of reduced analyte (M0) pre-concentrated in a mercury electrode. Among the used means for this quantification, Stripping ChronoPotentiometry, SCP, also known as Potentiometric Stripping Analysis (PSA), yields the time (τ) during which a constant total stripping current can progressively empty M0 from the electrode. The depletion factor (fd) is defined as the fraction of the total analyte that is depleted while the attainment of the constant total stripping current is possible. Full depletion only corresponds to the limiting case fd = 1. For (hemi)spherical electrodes, an analytical expression for fd is derived, which depends on the transition time τ, the electrode radius and the diffusion coefficient (but not explicitly on the total stripping current or the total charge). The theoretical expectations have been experimentally checked here with the Hanging Mercury Drop Electrode (HMDE) and the Thin Mercury Film Rotating Disc Electrode (TMF-RDE) for zinc and indium as analyte metals. In the case of the smallest drop in HMDE, for accurate total charge determinations, it is recommended to work with transition times longer than 5 s. In HMDE drops, the direct use of short transition times as analytical signals directly proportional to the free metal ion concentrations (in AGNES) might be inaccurate. Computing the charge with the depletion factor would be essential in such cases., Support from the Spanish Ministry of Science and Innovation (Projects PID2019-107033GB, PID2020-117910GB-C21 and PID2022-140312NB-C21 funded by MCIN/AEI/10.13039/501100011033) and from María Zambrano scholarship to ASCM (Ministerio de Universidades, Spain, funded by the European Union-NextGenerationEU)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Release of indium from In2O3 nanoparticles in model solutions and synthetic seawater

  • Rosales Segovia, Kevin
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Indium oxide (In2O3) nanoparticles (NPs) are used in electronic devices, from which indium (as its nanoparticulate form or as other generated chemical species) can be released to natural waters. To assess for the impacts of such releases (e.g. toxic effects), information on the kinetics and thermodynamics of the In2O3 dissolution processes is key. In this work, the evolution with time of the dissolution process was followed with the technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) by measuring the free indium concentration ([In3+]). AGNES can determine the free ion concentration in the presence of nanoparticles without a prior separation step, as shown in the case of ZnO nanoparticles, a procedure that is more accurate than the typical sequence of centrifugation+filtration+elemental analysis. Excess of indium oxide NPs were dispersed in 0.1 mol L−1 KNO3 at various pH values ranging from 2 to 8. Additional dispersions with bulk In2O3 at pH 3 or NPs in synthetic seawater at pH 8 were also prepared. The temperature was carefully fixed at 25 °C. The dispersions were continuously stirred and samples were taken from time to time to measure free indium concentration with AGNES. 180-day contact of In2O3 to solutions at pH 2 and 3 was not enough to reach equilibrium. The dissolution of the NPs at pH 3 was faster than that of the bulk (i.e. non nanoparticulate) material. Equilibrium of the NPs with the solution was reached at pH 4 and 5 in KNO3 and at pH 8 in seawater, in shorter times for higher pH values, with free indium concentrations decreasing by a factor of 1000 for each increase in one pH unit. The solubility products of In(OH)3 and In2O3 were compared. Equilibration of NPs with synthetic seawater took <18 days, with an average free [In3+] (up to 196 days) of 1.03 amol L−1., The authors gratefully acknowledge support for this research from the Spanish Ministry of Science and Innovation (Projects PID2019- 107033GB-C21, PID2020-117910GB-C21 and PID2022-140312NBC21) funded by MCIN/AEI/10.13039/501100011033 and Kevin Rosales-Segovia acknowledges to Generalitat de Catalunya for his FISDUR grant. The support of Nicola Capuano in measuring In in the dispersions and the expertise of Mireia Oromí with the Raman measurements are acknowledged. Preliminary results obtained in collaboration with M.H. Tehrani, P. Pla-Vilanova, E. Rotureau and J.P. Pinheiro are also acknowledged.