Pasar al contenido principal

EVALUACION EFICIENTE DE LA CONTAMINACION AMBIENTAL MEDIANTE MEMBRANAS DE INCLUSION POLIMERICA AVANZADAS

PID2022-140312NB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Comprehensive Study on the Effect of Plasticizers on the Characteristics of Polymer Inclusion Membranes (PIMs): Exploring Butyl Stearate as a Promising Alternative

  • Alcalde, Berta
  • Elias, Gemma
  • Kolev, Spas D.
  • Méndez, José Alberto
  • Díez, Sergi
  • Oliver-Ortega, Helena
  • Anticó, Enriqueta
  • Fontàs, Clàudia
This study investigated the influence of various plasticizers commonly used in the manufacture of polymer inclusion membranes (PIMs), such as 2-nitrophenyl octyl ether (NPOE), phthalates, adipates, and sebacates on the mechanical, thermal, and transport properties of membranes. Additionally, butyl stearate (BTS), chosen for its non-toxic nature compared to phthalates and its cost-effectiveness relative to adipates and sebacates, was evaluated as a plasticizer in PIMs for the first time. All plasticizers were incorporated in PIMs made of either cellulose triacetate (CTA) or poly(vinyl chloride) (PVC) as the base polymers and the task-specific ionic liquid trioctylmethylammonium thiosalicylate (TOMATS) as the carrier. The plasticizers were found to significantly affect the characteristics of membrane hydrophilicity, mechanical flexibility, and thermal stability. Transport experiments using Hg(II) as a model target ion revealed that, for CTA-based PIMs, the plasticizer did not significantly affect transport efficiency. However, for PVC-based PIMs, BTS exhibited better efficiency when compared to NPOE. These findings highlight the potential of BTS as an attractive alternative to currently used plasticizers in PVC-based PIM formulations., This work was supported by the Ministerio de Ciencia, Innovación y Universidades (MCIU) through project PID2019-107033GB-C22/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación, through project PID2022-140312NB-C22/MCIN/AEI/10.13039/501100011033/FEDER, UE, and European Union’s NextGenerationEU, through the National Recovery and Resilience Plan of the Republic of Bulgaria (Project No. BG-RRP-2.004-0008)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Insights on Iron-Trimesate MOFs for Inorganic As(III) and As(V) Adsorption from Aqueous Media

  • Azri, Afef
  • Amar, Marwa Ben
  • Walha, Khaled
  • Fontàs, Clàudia
  • Conde-González, José Elías
  • Salvadó, Victoria
  • Peña-Méndez, Eladia M.
Arsenic contamination of water endangers the health of millions of people worldwide, affecting certain countries and regions with especial severity. Interest in the use of Fe-based metal organic frameworks (MOFs) to remove inorganic arsenic species has increased due to their stability and adsorptive properties. In this study, the performance of a synthesized Nano-{Fe-BTC} MOF, containing iron oxide octahedral chains connected by trimesic acid linkers, in adsorbing As(III) and As(V) species was investigated and compared with commercial Basolite®F300 MOF. Despite their similarities in composition, they exhibit distinct structural characteristics in their porosity, pore size, and surface areas, which affected the adsorption processes. The kinetic data of the adsorption of As(III) and As(V) by both Fe-MOFs fitted the pseudo second-order model well, with the kinetic constant being higher for Basolite®F300 given its higher porosity. Intraparticle diffusion was, in both cases, the rate controlling step with the contribution of film diffusion in the adsorption processes, which achieved equilibrium after 1 h. The maximum adsorption capacity for As(V), 41.66 mg g−1, was obtained with Basolite®F300 at the 6.5–10 pH range, whereas Nano-{Fe-BTC} showed a different behaviour as maximum adsorption (14.99 mg g−1) was obtained at pH 2. However, both adsorbents exhibited the same performance for As(III) adsorption, which is not adsorbed at pH < 9. The Langmuir adsorption isotherm model fitted well for As(III) and As(V) adsorption by Nano-{Fe-BTC} and As(III) by Basolite®F300, whereas the Freundlich model fitted best for As(V) given its superior structural properties., This study was supported by project PID2022-140312NB-C22 (MICIU/AEI/10.13039/501100011033/FEDER, EU)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Deep eutectic solvents incorporated in a polymeric film for organophosphorus pesticide microextarction from water samples

  • Quintanilla, Ivonne
  • Fontàs Rigau, Clàudia
  • Anticó i Daró, Ma. Enriqueta
Background: Organophosphorus pesticides (OPPs) were extensively used in agriculture. Due to their adverse effect, there is a need for sensitive and reliable methods to determine these agrochemicals. Microextraction techniques (ME) afford the opportunity to substantially reduce the amount of organic solvent used in classical extraction methods for pesticide analysis. Moreover, deep eutectic solvents (DES) made of components of natural origin, have been applied in microextraction techniques as a green alternative to organic solvents. The combination of thin film microextraction and DES can be seen as an alternative for thin film microextraction of OPPs from water samples. Results: We describe a thin film microextraction-GC-MS method for the determination of OPPs from water samples. The thin film was prepared by solvent casting using cellulose triacetate (CTA) as the polymer and a deep eutectic solvent as the extracting phase. Lidocaine, menthol, dodecanoic acid, and camphor were tested as the components for DES-based film. With a film containing 70 % (w) of CTA and 30 % of the DES dodecanoic acid:lidocaine, quantitative results for the extraction of an OPPs mix were achieved. Then, the elution was performed with 2 mL of ethyl acetate. The validation of the TFME method was performed with a piece of the film suspended in 20 mL of sample solution with a contact time of 1 h. Limits of detection in the low μg L−1 range were obtained using a single quadrupole mass analyser. The thin film with pipette tip configuration was tested and preliminary results for chlorpyrifos were satisfactory. Significance: This represents the first approach to use polymeric films made of CTA and DES for TFME of OPPs, in two configuration the suspended film and pipette tip, This study was supported by Spanish Government through project PID2022-140312NB-C22 funded by MICIU/AEI/10.13039/501100011033/FEDER, UE, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 6
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Titanium dioxide as an efficient sorbent for the solid-phase extraction of glyphosate and its main metabolite in natural waters

  • Arxé, Marta
  • Cordón, Natàlia
  • Cañigueral, Joan
  • Fontàs Rigau, Clàudia
  • Sánchez Navarro, Juan Manuel
Glyphosate (GLP) and its main metabolite, AMPA, are widely detected in natural waters after herbicide application. This study evaluates titanium dioxide (TiO₂) as an adsorbent for extracting and determining these compounds from water samples. TiO₂ showed high adsorption efficiency for both GLP and AMPA, particularly under acidic conditions. Compared with conventional anion-exchange sorbents, TiO₂ provided better sample clean-up and increased sensitivity, especially when combined with mass spectrometry. However, adsorption strongly depended on the flow rate: GLP was efficiently retained below 1.7 mL/min, while AMPA required slower flow rates of 0.5 mL/min or less. Elution was achieved using 0.5 M NaOH, and no degradation of GLP on the TiO₂ surface was observed under acidic conditions. Overall, TiO₂ is a promising sorbent for the extraction and analysis of glyphosate and AMPA in natural waters, The financial support from the Ministerio de Ciencia, Innovaci´on y Universidades (MICIU) through project PID2022-140312NB-C22/MCIN/ AEI/10.13039/501100011033/FEDERis acknowledge, 6
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sexual Hormones Determination in Biofluids by In-Vial Polycaprolactone Thin-Film Microextraction Coupled with HPLC-MS/MS

  • Merlo, Francesca
  • Anselmi, Silvia
  • Speltini, Andrea
  • Fontàs Rigau, Clàudia
  • Anticó i Daró, Ma. Enriqueta
  • Profumo, Antonella
The in-vial microextraction technique is emerging as an alternative sample treatment, as it integrates sorbent preparation, adsorption, and desorption of analytes in a single device before instrumental analysis. In this work, the applicability of polycaprolactone polymeric film, recently used for the in-vial microextraction of sex hormones from envi ronmental waters, is studied in a low-capacity format for unconjugated sex hormones determination in biological samples by HPLC-MS/MS. Its performance was evaluated in urine and serum, achieving extraction in a short time (10 and 30 min, in turn) and satisfactory elution with ethanol, with recovery in the range of 65–111% in urine, 55–122% in bovine serum albumin (BSA) solution, and 66–121% in fetal bovine serum (FBS). In the case of protein matrices, a dilution to 20 g L−1 protein content and washing step (3 × 1 mL ultrapure water) afore the elution are required to achieve clean extract, as verified by a Bradford assay. Matrix-matched calibration was used for quantification, obtaining corre lation coefficients greater than 0.9929; limits of detection and quantification were in the range of 0.01–0.65 and 0.03–1.96 ng mL−1 in urine, 0.02–0.8 and 0.05–2.5 ng mL−1 in BSA, and 0.02–1.0 and 0.06–3.0 g mL−1 in FBS, respectively. The in-vial polycaprolactone film proved to be reusable for several cycles (up to ten), and the greenness assessment revealed a good adhesion to green sample preparation principles. All these achievements further strengthen its feasibility for efficient extraction/clean-up of trace sex hormones in complex biological samples., C.F. and E.A. acknowledge the financial support from the Ministerio de Ciencia, Innovación y Universidades (MICIU) through project PID2022-140312NB-C22/MCIN/AEI/10.13039/501100011033/FEDER., 3, 12
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sexual hormones monitoring in surface waters and wastewaters from Northern Italy by thin film microextraction coupled with HPLC–MS/MS

  • Merlo, Francesca
  • Quarta, Valentina
  • Speltini, Andrea
  • Profumo, Antonella
  • Fontàs Rigau, Clàudia
  • Anticó i Daró, Ma. Enriqueta
The occurrence of sex steroid hormones, viz. oestrogens and progestins, in aquatic ecosystems is of global concern due to their role as endocrine disrupting chemicals, even at low concentration (μg L−1 or less). Thus, it is essential to monitor these organic pollutants to get a realistic picture of their presence and to control their contamination levels in environmental water bodies. In this respect, we have explored the use of self-prepared polymeric films as novel sorptive phase for the microextraction of 17β-estradiol, 17α-ethinylestradiol, estrone, progesterone, medroxyprogesterone acetate and hydroxyprogesterone. The thin film microextraction procedure has been developed, evaluating different film compositions, sample volumes and elution conditions to recover the sorbed analytes. The overall method provides good reproducibility (RSD < 12%) and recoveries higher than 60%. The final method has been applied to environmental monitoring in surface waters (river and lake samples) and urban wastewater treatment plant effluents and influents from Northern Italy, to get a contamination snapshot of this highly urbanized area, This work was funded by the Ministerio de Ciencia, Innovación y Universidades (MCIU) through project PID2019-107033 GB-C22/AEI /https://doi.org/10.13039/501100011033 and through project PID2022-140312NB-C22 funded by MICIU/AEI/https://doi.org/10.13039/501100011033/FEDER, UE, Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Novel Supported Polymer Inclusion Membrane Concept for Reagent-Efficient Membrane Design

  • Khatir, Nasim
  • Anticó i Daró, Ma. Enriqueta
  • Fontàs Rigau, Clàudia
This work explores, for the first time, a novel strategy for the preparation of polymer inclusion membranes (PIMs) based on their deposition onto porous supporting substrates, introducing the concept of supported PIMs as a reagent-efficient alternative to conventional free-standing membranes. The approach aims to improve the sustainability of PIM fabrication by significantly reducing the amount of polymer and extractant required while preserving membrane functionality. PIMs were prepared using the two most widely employed base polymers, cellulose triacetate (CTA) and poly(vinyl chloride) (PVC), with Aliquat 336 as extractant. The total reagent consumption was reduced to half of the conventional formulation for CTA-based membranes and to one quarter for PVC-based membranes. Two porous supports with contrasting physicochemical properties—a hydrophilic cellulose filter paper and a hydrophobic Durapore® PVDF membrane—were investigated. The supported membranes were characterized by contact angle measurements, SEM, FTIR, and TGA, confirming the successful integration of the PIM phase onto the porous supports without chemical alteration. Arsenate (As(V)) transport, preconcentration, and membrane reusability were evaluated. CTA-based supported PIMs exhibited transport efficiencies of approximately 90–95%, comparable to free-standing PIMs, whereas PVC-based systems showed a stronger dependence on membrane loading. Notably, CTA-based Durapore®–PIMs retained around 70% transport efficiency after three reuse cycles. These results demonstrate the feasibility of supported PIMs as a strategy for reducing membrane material consumption while preserving functional performance, Nasim Khatir would like to thank the University of Girona for the research fellowship ref. IFUdG 2022. The financial support from the Ministerio de Ciencia, Innovación y Universidades (MICIU) through the project PID2022-140312NB-C22/MCIN/AEI/10.13039/501100011033/FEDER is acknowledged, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Comprehensive Study on the Effect of Plasticizers on the Characteristics of Polymer Inclusion Membranes (PIMs): Exploring Butyl Stearate as a Promising Alternative

  • Alcalde Saña, Berta
  • Elias Estañol, Gemma
  • Kolev, Spas D.
  • Méndez González, José Alberto
  • Díez Salvador, Sergi
  • Oliver Ortega, Helena
  • Anticó i Daró, Ma. Enriqueta
  • Fontàs Rigau, Clàudia
This study investigated the influence of various plasticizers commonly used in the manufacture of polymer inclusion membranes (PIMs), such as 2-nitrophenyl octyl ether (NPOE), phthalates, adipates, and sebacates on the mechanical, thermal, and transport properties of membranes. Additionally, butyl stearate (BTS), chosen for its non-toxic nature compared to phthalates and its cost-effectiveness relative to adipates and sebacates, was evaluated as a plasticizer in PIMs for the first time. All plasticizers were incorporated in PIMs made of either cellulose triacetate (CTA) or poly(vinyl chloride) (PVC) as the base polymers and the task-specific ionic liquid trioctylmethylammonium thiosalicylate (TOMATS) as the carrier. The plasticizers were found to significantly affect the characteristics of membrane hydrophilicity, mechanical flexibility, and thermal stability. Transport experiments using Hg(II) as a model target ion revealed that, for CTA-based PIMs, the plasticizer did not significantly affect transport efficiency. However, for PVC-based PIMs, BTS exhibited better efficiency when compared to NPOE. These findings highlight the potential of BTS as an attractive alternative to currently used plasticizers in PVC-based PIM formulations, This work was supported by the Ministerio de Ciencia, Innovación y Universidades (MCIU) through project PID2019-107033GB-C22/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación, through project PID2022-140312NB C22/MCIN/AEI/10.13039/501100011033/FEDER, UE, and European Union’s NextGenerationEU, through the National Recovery and Resilience Plan of the Republic of Bulgaria (Project No. BG-RRP-2.004-0008)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New Insights on Y, La, Nd, and Sm Extraction with Bifunctional Ionic Liquid Cyphos IL 104 Incorporated in a Polymer Inclusion Membrane

  • Malki, Mohamed
  • Mitiche, Lynda
  • Sahmoune, Amar
  • Fontàs Rigau, Clàudia
In this study, an ionic liquid-based polymer inclusion membrane (IL-PIM) made of (50% polymer-50% CyphosIL104) was used to extract and separate the rare earth elements (REEs) Y, La, Nd, and Sm in chloride solutions. The effect of extraction time and pH was studied to optimize the extraction and separation conditions. The four REEs were effectively extracted at pH 4–5 from both single and mixed metals solutions. However, at pH 2, only Y was extracted. The recovery of the extracted REEs from the loaded PIM was achieved using HNO3 and H2SO4. In the case of La, it was quantitatively back-extracted with H2SO4 after a contact time of 1 h, while up to 4 h was necessary to recover 70% of the extracted Y, Sm, and Nd. Extraction isotherms were studied, and the Freundlich isotherm model was the most adequate to describe the interaction between the PIM and the REEs. Finally, the developed PIM was investigated for the extraction of REEs from mixtures containing other metals, which showed great selectivity for the REEs, This research was funded by MCIU/AEI/10.13039/501100011033/FEDER, EU, grant number PID2022-140312NB-C22
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polymer inclusion membrane (PIM) extraction technique for assessing metal interactions with organic pollutants and microplastics in aquatic systems

  • Khatir, Nasim
  • Alcalde Saña, Berta
  • Anticó i Daró, Ma. Enriqueta
  • Fontàs Rigau, Clàudia
This study presents a novel approach for studying metal-contaminant interactions in aquatic environments, based on a polymer inclusion membrane (PIM) as extraction technique, for the divalent metal ions (Ni(II), Cu(II), and Zn(II)). PIMs are designed to selectively extract metal ions, offering a simple method for assessing the free fraction of metals, which is crucial for understanding their bioavailability and potential toxicity. The PIM, composed of 40 % triacetate cellulose (CTA), 30 % di-(2-ethylhexyl) phosphoric acid (D2EHPA), and 30 % tributyl phosphate (TBP), efficiently facilitates the transport of Ni(II), Cu(II), and Zn(II) into a receiving phase of 0.5 M HNO3, with the affinity following the trend Cu(II) > Zn(II) > Ni(II). All metals exhibit a linear trend in relation to the concentration of metal in the feed phase and the amount accumulated in the receiving phase, within the studied range (0.02 to 0.08 mM). Moreover, this research explores, for the first time, the potential interactions of these metals with two sulfonamide antibiotics, sulfamethoxazole (SMX) and sulfamethazine (SMZ), and two types of microplastics: commercial PVC and a blend of waste plastics. Although a potential interaction is inferred between Cu(II), Zn(II), and sulfamethoxazole at higher concentrations, no significant interaction is observed for Ni(II). In contrast, sulfamethazine does not exhibit measurable interactions with any of the metal ions under the conditions studied. Additionally, microplastics show weak or negligible interactions with the metals, suggesting a minimal impact on metal extraction under the experimental conditions. Finally, the PIM-extraction technique was applied to measure free Zn levels in a river water sample impacted by drainage from an abandoned mine, and in the same matrix enriched with microplastics and SMX at environmentally relevant concentrations, Aquest treball va comptar amb el suport del Ministerio de Ciencia, Innovación y Universidades (MICIU) a través del projecte PID2022-140312NB-C22/MCIN/AEI/10.13039/501100011033/FEDER
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biochar-based polymeric film as sustainable and efficient sorptive phase for preconcentration of steroid hormones in environmental waters and wastewaters

  • Merlo, Francesca
  • Anticó i Daró, Ma. Enriqueta
  • Merli, Rachele
  • Cabrera Codony, Alba
  • Fontas Rigau, Claudia
  • Speltini, Andrea
  • Profumo, Antonella
Background: The environmental impact of sample preparation should be minimized through simplification of the procedures and the use of natural, renewable and/or reusable materials. In such scenario, thin-film microextraction fulfils the former criteria, as it enables few steps and miniaturization, thus small amount of extraction phase. At the same time, the use of sorbents such as biochars obtained from biomass waste is even more promoted due to their availability at low cost and increased life-cycle in a circular economy vision. However, it is not always easy to combine these criteria in sample preparation. Results: A thin film microextraction was developed for the determination of steroids in aqueous samples, entailing a membrane made of cellulose triacetate and a wood-derived biochar (Nuchar®) as carbon precursor. Different characterization techniques showed the successful preparation, whereas the sorption kinetics experiments demonstrated that biochar is responsible for the extraction with the polymer acting as a smart support. After a study about membranes’ composition in terms of biochar amounts (4 %, 10 %, 16 % wt) and type of synthesis set up, the ceramic 3D-mold was selected, achieving reproducible and ready-to-use membranes with composition fixed as 10 %. Different elution conditions, viz. type and time of agitation, type, composition and volume of eluent, were evaluated. The final microextraction followed by HPLC-MS/MS quantification was successfully validated in river and wastewater treatment plant effluent samples in terms of accuracy (R% 64–123 %, RSD<19 % in river; R% 61–118 %, RSD <18 % in effluent, n = 4), sensitivity (MQLs 0.2–8.5 ng L<sup>−1</sup>) and robustness. Significance: This novel biochar-based polymeric film proved to be a valid and sustainable sorbent, in terms of extraction capability, ease of preparation and greenness. By comparison with literature and the greenness evaluation with the most recent metric tools, this method expands the potential applicability of the thin-film microextraction and opens up innovative scenarios for sustainable procedures entailing the use of biochars entrapped in bio-polymers, This work was supported through project PID2022-140312NB-C22 funded by MICIU/AEI/10.13039/501100011033/FEDER, UE. The Authors acknowledge the support of “Ministero dell’Universit` a e della Ricerca (MUR)” and the University of Pavia through the program “Dipartimenti di Eccellenza 2023–2027”., 12
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Facilitating inorganic arsenic speciation and quantification in waters: Polymer inclusion membrane preconcentration and X-ray fluorescence detection

  • Chillè, Donatella
  • Marguí Grabulosa, Eva
  • Anticó i Daró, Ma. Enriqueta
  • Foti, Claudia
  • Fontàs Rigau, Clàudia
Arsenic, classified as a priority pollutant and human carcinogen by the IARC, is subject to stringent regulatory limits in food and water. Among various arsenic species found in water samples, arsenite (As(III)) is identified as the most toxic form. Given the limitations of conventional spectroscopic techniques in speciation analysis, there is a crucial need for innovative and sustainable methodologies that enable arsenic speciation. Simplifying these methodologies is essential for widespread applicability and effective environmental monitoring. Results This study proposes a simple and cost-effective analytical methodology for speciating inorganic arsenic in water samples. The method involves extracting As(III) into a polymer inclusion membrane (PIM) containing the extractant Cyanex 301 (bis(2,4,4-trimethylpentyl) dithiophosphinic acid), followed by analysis using energy dispersive X-ray fluorescence (EDXRF) spectrometry. The concentration of arsenate was measured after a reduction step using a thiosulfate/iodide mixture. This simple methodology allows a limit of quantification for trivalent arsenic (2 μg L−1), which is well below the World Health Organization's recommended maximum permissible level of As in drinking water (10 μg L−1). The method that is developed allows the determination of As at trace levels in waters with naturally occurring arsenic. Significance and novelty This study represents a significant advance in the field, providing a novel and efficient methodology for arsenic speciation analysis in water samples. By combining the advantages of polymer inclusion membrane (PIM) extraction with energy dispersive X-ray fluorescence (EDXRF) spectrometry, this study offers a cost-effective and environmentally friendly approach to address the critical issue of arsenic contamination in water sources, thereby contributing to enhanced environmental monitoring and public health protection, This study was supported by project PID2022-140312NB-C22 funded by MICIU/AEI/10.13039/501100011033/FEDER, EU, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

In-vial polycaprolactone thin film for sampling and microextraction of sexual hormones in environmental waters and wastewaters followed by HPLC-MS/MS

  • Merlo, Francesca
  • Cerviani, Vincenzo
  • Fontàs Rigau, Clàudia
  • Speltini, Andrea
  • Profumo, Antonella
  • Anticó i Daró, Ma. Enriqueta
Background: The sustainability of sample treatments is a hot topic that can be addressed focusing on miniaturization of techniques and design of more efficient and sustainable sorbents. In such scenario, in-vial microextraction is increasingly reported as a reliable alternative to other solid-phase extraction setups, as integrates sampling, adsorption and desorption in a single device before instrumental analysis. Polymeric thin films have proven to be a versatile and efficient material for microextraction processes, but more attention has to be paid to the preparation steps both in terms of nature of polymer and possible co-extractant, and of solvents applied during the solubilization process. Results: An in vial-microextraction device for sex hormones was fabricated using as the extractant a thin film made of a biodegradable polymer (polycaprolactone, PCL) directly formed on the bottom wall of a glass vial. The greenness assessment of the film preparation results in the selection of an environmentally friendly solvent (methyl-tetrahydrofuran) for PCL solubilization. After evaluation of key parameters (contact time, desorption solvent and conditions), efficient adsorption-desorption cycle is completed in 30 min. High simplicity, low sample manipulation (two steps), quantitative adsorption and recovery (EE% > 70; R% > 60 for most analytes, respectively) determined by HPLC- MS/MS greatly improve sample throughput and the greenness of the method (0.66 by AGREEprep and 7.58 by SPMS). The method was successfully validated in actual water samples, showing low limits of detection (2–35 ng L−1), satisfactory linearity (0.5–50 μg L−1), and limited matrix effects (<10 % for river and <25 % for wastewater). Significance: This polycaprolactone film proved to be a biodegradable and sustainable sorbent towards sex hormones. Its applicability in the in-vial thin film microextraction ensures the whole sample treatment in the same vial with high throughput, low energy and solvent consumption, keeping unchanged performance for multiple cycles. The method combines a green sample treatment with accurate detection and high sensitivity by HPLC-MS/MS, representing significant progress in miniaturized devices for environmental scope, 12