Pasar al contenido principal

DESARROLLO DE ELECTRODOS GRUESOS MEDIANTE DIFERENTES TECNICAS DE FABRICACION CERAMICA PARA BATERIAS DE ESTADO SOLIDO

PID2022-140373OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD CARLOS III DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of sintering and C65 conductive additive on the performance of full-ceramic 3D-LiFePO4 thick electrodes produced by direct ink writing

  • Martínez-Rodríguez, Dayron
  • Martínez-Cisneros, Cynthia S.
  • Ramírez, Cristina
  • Belmonte, Manuel
  • Varez, Alejandro
Thick ceramic LiFePO₄ electrodes (800 µm thickness, ∼104 mg/cm² mass loading) are fabricated by direct ink writing using a sustainable aqueous-based suspension. This approach enables the formation of three-dimensional electrodes with a controlled porous architecture that enhances electrode/electrolyte wettability and mitigates ion and charge transport limitations typically associated with thick electrodes. The effects of debinding and sintering conditions on the microstructure and electrochemical performance are systematically investigated. In addition, the role of a super conductive carbon black (C65) additive is evaluated as a strategy to enhance electronic conductivity while preserving the ceramic nature of the electrodes. After optimization, fully ceramic binder-free electrodes are obtained. When assembled in full cells with Li₄Ti₅O₁₂ as the negative electrode and LP30 electrolyte, the optimized electrodes deliver areal capacities from 8.1 mAh/cm² at C/4 up to 14.4 mAh/cm² at C/25, retaining 5.9 mAh/cm² at 1 C., This work has been supported by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” through grant projects PID2020–12056RJ-I00, PID2021–125427OB-I00, PID2022–140373OB-I00 and PID2024–158338OB-I00; and through grant RYC2022–037989-I. APC Funding: Universidad Carlos III de Madrid (CRUE-Madroño 2025 Agreement). A. del Campo for advising on Raman measurements and spectra separation., Appendix A. Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-areal capacity and binder-free thick-ceramic LFP electrodes manufactured by robocasting for Li-ion batteries

  • Martínez-Cisneros, Cynthia S.
  • Ramírez, Cristina
  • Martínez-Rodríguez, Dayron
  • Belmonte, Manuel
  • Levenfeld, Belen
  • Varez, Alejandro
To address the growing demands for energy density, power, lifetime, and safety in Li-ion batteries, innovative processing techniques for high-capacity electrodes are essential. This study explores the additive manufacturing of ultra-thick LiFePO4 (LFP) electrodes (∼800 μm) using robocasting, as an alternative to traditional methods like screen printing or pressing. 3D LFP-based electrodes with cellular architectures and high mass loading (∼20 mg) are designed to enhance ion transport and energy density by increasing the surface area. Eco-friendly, aqueous-based printable inks are optimized for suitable rheological properties (viscosity, modulus, yield strength), in agreement with scalable and sustainable production. To improve mechanical strength and conductivity, 3 wt% of graphene oxide (GO) or graphene nanoplatelets (GNP) are incorporated to the ink formulation. After printing, 3D structures undergo thermal debinding and sintering to remove inactive components, yielding additive-free electrodes. Microstructural, mechanical, and electrical characterizations reveal that GO incorporation increases Vickers hardness by 50 % without compromising compressive strength. Electrochemical testing with Li4Ti5O12 (LTO) as the anode demonstrates promising performance, with LFP-GO electrodes achieving areal capacities up to 11 mA h cm−2 (21 mW h cm−2) at C/25. These results highlight the potential of robocasting to produce robust, high-performance thick electrodes for next-generation Li-ion batteries., This work has been supported by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe” through Grant (projects PID2019-106662RBC43, PID2020-12056RJ-I00, PID2021–125427OB-I00 and PID2022-140373OB-I00) and the Madrid Government (Comunidad de Madrid-Spain) through the DROMADER- CM project (Y2020/NMT6584). APC Funding: Universidad Carlos III de Madrid (CRUE-Madro˜no 2025 Agreement., Data will be made available on request., Peer reviewed