Pasar al contenido principal

EL HIERRO COMO COMBUSTIBLE EN NUEVOS CICLOS DE ALMACENAMIENTO DE ENERGIA

PID2022-141372OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Energy storage using direct iron oxide reduction and energy utilization with high temperature metal combustion

  • Romeo, Luis M.
  • Mayoral Gastón, María del Carmen
  • Jiménez, Santiago
  • Rubio Villa, Begoña
  • Andrés Gimeno, José Manuel
4 figures, 3 tables.-- Work presented at INFUB-14, 14th European Conference on Industrial Furnaces and Boilers, Algarve, Portugal, 2 - 5 April 2024, In recent years, driven by the increasing necessity of renewable energy storage systems, there has been an increasing interest in the proposal of new alternatives. One promising option is based on the use of iron as an energy storage material. After releasing of energy by high temperature combustion, the resulting iron oxide can be regenerated to iron through the contribution of renewable hydrogen. Consequently, solid iron is a friendly, cheap, ease of handling and transport, availability, high energy density and effective way of storing energy. So it can be considered as an energy carrier or recyclable electrofuel. Several research groups have lately experimentally demonstrated the feasibility of self-sustaining combustion of various finely ground metals. This is a novel research line endorsed by promising results of recent studies in laboratory facilities with iron particles of sizes up to a few tens of microns. For the reduction step, there are proven experiences based on direct reduction iron technology (DRI) that converts solid iron ore to metallic iron without conversion to the liquid phase. This work explores the technical feasibility and the preliminary design of an installation for energy storage based on iron utilization as energy carrier. Iron could be oxidized and used as fuel in high temperature reactors/boilers (more than 1200ºC) and release their energy content to form iron oxide. Then, when (green) hydrogen is available this material can be reduced to iron through well-known DRI process or similar at around 750ºC. The aim is to detect the limitations and strengths of the proposed concept by elaborating an application scheme at a relevant scale. It will allow in a near future to evaluate the economic feasibility and impact of the technology as an option for energy storage. The work analyses and sizes optimally the reactors and necessary heat exchangers to achieve the required reactor temperatures with the minimum energy consumption. In the case of energy storage (reduction step) it minimizes the hydrogen mass flow required for the reduction, and when the energy is released on iron oxidation it maximizes the energy transferred to be used elsewhere. This analysis is essential to assess the possibilities of future implementation at larger scale., The work presented in this paper has been funded by the R&D Spanish National Program and the European Regional Development Funds (European Commission), under project NewIronAge, PID2022-141372OB-I00 and it is also supported by the Government of Aragon (Energía y CO2. Research Group DGA T46_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detailed physicochemical evolution of iron particles burnt under controlled, realistic conditions

  • Jiménez, Santiago
  • Mayoral Gastón, María del Carmen
  • Romeo, Luis M.
14 figures.-- © 2025. This manuscript version is made available under the CC-BY-NC-ND 4.0 license., The combustion of pulverized iron has been studied experimentally in a flat flame reactor in a variety of conditions (high gas temperature, constant [O2] within 4.1–16 %, 75–90 µm). Particle temperature profiles were measured in situ. Samples were collected through rapid cooling in N2 at different residence times in these conditions, resulting in a very detailed characterization of their evolution in terms of internal structure, composition, size and mass. For the latter, a thermogravimetric method has been developed in order to determine the oxidation degree, i.e. the fraction of oxygen in each sample, with considerable advantages over e.g. X-ray diffraction. These new curves for mass vs. distance travelled (as well as the temperature profiles) show a clear gradation with [O2], highlighting iron may indeed be seen as a ‘regular’ fuel and pointing to existing technologies for controlling its oxidation rate and temperature in a potential industrial facility. SEM and XRD give sound evidence for the existence of successive stages in the oxidation process, namely Fe → FeO → Fe3O4 → Fe2O3, with no overlapping between them. In the step Fe → FeO, two clear phases are observed, with a receding iron core surrounded by iron oxide and spontaneous emulsification of both phases. The particles steadily grow when they get oxidized. Statistically significant voids appear in the last stages of oxidation; some particles nearly double their size in these stages. At least two types of particle breakup were observed, but none of them affected noticeably the particle size distribution., This work was partly funded by the Spanish Ministry of Science, Innovation and Universities through grant PID2022-141372OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy storage using direct iron oxide reduction and energy utilization with high temperature metal combustion

  • Romeo, Luis M.
  • Saez-Guinoa, Javier
  • Jiménez, Santiago
  • Mayoral Gastón, María del Carmen
6 figures, 5 tables., In response to the growing demand for renewable energy storage solutions, metal fuels have emerged as a promising alternative as recyclable energy carriers. These metals release energy through combustion, forming metal oxides, which can subsequently be regenerated into their metallic state using renewable hydrogen. Recent experimental studies have demonstrated the feasibility of self-sustaining combustion-oxidation of various finely ground metals. For the reduction step, established direct reduction iron (DRI) technology has been successfully used to convert solid iron ore into metallic iron without transitioning to the liquid phase. Through thermodynamic calculations conducted using Aspen, ensuring precise process modelling and efficiency evaluation, this study examines the technical feasibility and preliminary design of an energy storage system that employs iron as a metallic energy carrier. Iron undergoes oxidation and serves as a fuel in high-temperature reactors operating above 1200 °C, thereby releasing its stored energy and forming iron oxide. When hydrogen is available, the iron oxide can be reduced back to metallic iron through the well-established Direct Reduced Iron (DRI) process or a comparable method at approximately 750 °C. A round-trip thermal efficiency of 77.9 % has been calculated for the overall energy storage and utilization process. To further enhance global efficiency, key recommendations include hydrogen recirculation during the reduction process to ensure complete conversion and mitigating the impact of excess air in the oxidation stage., The work presented in this paper has been funded by the R&D Spanish National Program and the European Regional Development Funds (European Commission), under project NewIronAge, PID2022-141372OB-I00 and it is also supported by the Government of Aragon (Energía y CO2. Research Group DGA T46_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Apparent kinetics for direct oxidation of iron particles determined from tests at high temperature in a flat flame reactor

  • Jiménez, Santiago
  • Mayoral Gastón, María del Carmen
  • Romeo, Luis M.
17 figures, 2 tables., The results from experiments with 63–75 μm iron particles burning in high temperature gases in a flat flame reactor with 4–16% O2 are presented and compared with calculations, with the main goal of determining the vicinity of the measured oxidation rates to the external diffusion limit. The simulations consider oxygen diffusion through the particle’s boundary layer and encompass internal processes (diffusion, liquid convection, reaction, etc.) in the form of apparent kinetics in the outer surface of the particle. The main magnitudes monitored experimentally are particle temperature and especially its oxidation degree, based on the mass of oxygen absorbed; both are determined at different heights along the reactor, which results in detailed profiles with distance traveled or residence time. The assumption of combustion in the (external) diffusion limit notably overestimates the oxidation rate and the peak temperature of the particles. On the contrary, the introduction of different, progressively slower apparent kinetics for each oxidation stage, with Fe–O ratios corresponding to Fe → FeO → Fe3O4 → Fe2O3, results in an excellent agreement to the experimental data, particularly regarding the oxidation curves. The same kinetics are shown to fit equally well previous results obtained in tests with 75–90 μm, recently published by the authors., This work was partly funded through grant PID2022-141372OB-I00 by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Apparent kinetics for direct oxidation of iron particles determined from tests at high temperature in a flat flame reactor [Dataset]

  • Jiménez, Santiago
  • Mayoral Gastón, María del Carmen
  • Romeo, Luis M.
Under a Creative Commons BY 4.0 license., Figure SI1. Post-tests picture of a 75 μm platinum wire (straight, smooth) and a fragment of a ~112 μm iron oxide wire (originally 50 μm, pure iron); Figure SI2. General aspect of the iron ‘flames’. From left to right, 0.5, 4.1, 8, 12, 16% O2. Time exposure 1/100 s. The tube length is 49 cm. The gas flat flame is hardly visible at top; Figure SI3. X-ray diffractograms (black line) and Rietveld quantitative fit in samples collected at different heights below the burner (indicated below the legend). Note that FeO is represented by several compounds. (Continues); Figure SI3 (Continued). X-ray diffractograms (black line) and Rietveld quantitative fit in samples collected at different heights below the burner (indicated below the legend). Note that FeO is represented by several compounds. (Continues); Figure SI3 (Continued). X-ray diffractograms (black line) and Rietveld quantitative fit in samples collected at different heights below the burner (indicated below the legend); Figure SI4. Evolution of the particle size distribution (number-weighed) for the 63-75 μm cut in 4.1, 8 and 16% O2. Legend shows HbB in cm.; Figure SI5. Fraction of iron in the samples determined by TGA vs. XRD for the two size cuts studied in the present work and in a recent study with 75-90 μm particles. Figure SI6. Size distributions of the iron 63-75 μm particles. Blue, continuous: original fuel, laser diffractometer, volume-weighed (D43~90 μm); blue, short-dashed: idem, but number-weighed (D10~74 μm); red, long-dashed: number-weighed distribution in the sample with smallest oxidation degree but round aspect (D10~72 μm); Figure SI7. Photographs in a microscope (x40) of the original 63-75 μm particles (top), and samples collected at 19 cm, 4.1% O2 (center) and 12 cm, 8% O2 (bottom)., This work was partly funded through grant PID2022-141372OB-I00 by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantification of iron vaporization and fragmentation during direct oxidation in moderate oxygen concentrations

  • Jiménez, Santiago
  • Mayoral Gastón, María del Carmen
14 figures, 2 tables., The formation of submicron particles by evaporation of iron and subsequent condensation of iron oxides is an aspect of potential concern in the direct oxidation of iron, proposed as a zero-carbon technology for energy storage and transport when combined with ore reduction. In this work, 63–75 μm iron particles have been burnt in a high temperature atmosphere with 4–16% O2, a range of conditions representative of most regions in a combustion chamber operated with air. The particulate emissions were classified by size, and presented three different modes: the ‘coarse’ particles, resulting from the evolution of the fuel particles; an intermediate mode, roughly 1–25 μm, formed by fragments of explosions of the larger particles and sharing their morphology and composition (magnetite + hematite); and a mode of submicron particles, composed of Fe2O3 (mostly maghemite). The fraction of mass in the last two modes increases monotonically with the oxygen concentration (particle temperature), up to 2.1 and ∼ 0.8% in the total particulate emissions, respectively. A 0-D evaporation model considering only vapor diffusion fails to fit the trend determined experimentally from the amount of submicron particles; based on the vapor pressure vs. particle temperature for either liquid Fe or FeO, a steeper trend was expected, which suggests that further work on the subject is still necessary. The experimental vaporization yields reported here point to the need of efficient particle retention systems in iron-fueled power plants., This work was partly funded through grant PID2022-141372OB-I00 by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Quantification of iron vaporization and fragmentation during direct oxidation in moderate oxygen concentrations

  • Jiménez, Santiago
  • Mayoral Gastón, María del Carmen
Under a Creative Commons BY 4.0 license., Table SM1. Cut diameters of the impactor stages, under the assumption of isolated spheres, for densities 1000 kg/m3 (“aero”) and 5300 kg/m3 (“Fe2O3”). -- Figure SM1. Particle size distributions of the coarse particle mode (i.e. those collected in the cap in Fig. 2), together with the original 63-75 μm iron particles, as measured in a laser diffractometer.-- SM2_DSC_0663_rot.AVI Video with a pair of (intended) interruptions in the fuel feeding.-- SM3. As in Figure 3 in the paper (16% O2, i.e. first in the right) but with 1/500 s exposure, so that the micro-clouds can be distinguished more clearly.-- Figure SM4. X-ray diffractogram of the sample collected on stage #6 (peak of the submicronic mode) in the test with 16% O2 (black line) and automatic fit by the Rietveld method (red line).-- Figure SM5. X-ray diffractogram of the sample collected on stage #4 (peak of the submicronic mode) in the test with 6% O2 (black line) and automatic fit by the Rietveld method (red line)., This work was partly funded through grant PID2022-141372OB-I00 by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Detailed physicochemical evolution of iron particles burnt under controlled, realistic conditions

  • Jiménez, S.
  • Mayoral, M.C.
  • Romeo, L.M.
The combustion of pulverized iron has been studied experimentally in a flat flame reactor in a variety of conditions (high gas temperature, constant [O2] within 4.1–16 %, 75–90 µm). Particle temperature profiles were measured in situ. Samples were collected through rapid cooling in N2 at different residence times in these conditions, resulting in a very detailed characterization of their evolution in terms of internal structure, composition, size and mass. For the latter, a thermogravimetric method has been developed in order to determine the oxidation degree, i.e. the fraction of oxygen in each sample, with considerable advantages over e.g. X-ray diffraction. These new curves for mass vs. distance travelled (as well as the temperature profiles) show a clear gradation with [O2], highlighting iron may indeed be seen as a ‘regular’ fuel and pointing to existing technologies for controlling its oxidation rate and temperature in a potential industrial facility. SEM and XRD give sound evidence for the existence of successive stages in the oxidation process, namely Fe → FeO → Fe3O4 → Fe2O3, with no overlapping between them. In the step Fe → FeO, two clear phases are observed, with a receding iron core surrounded by iron oxide and spontaneous emulsification of both phases. The particles steadily grow when they get oxidized. Statistically significant voids appear in the last stages of oxidation; some particles nearly double their size in these stages. At least two types of particle breakup were observed, but none of them affected noticeably the particle size distribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Energy storage using direct iron oxide reduction and energy utilization with high temperature metal combustion

  • Romeo, Luis M.
  • Saez de Guinoa, Javier
  • Jiménez, Santiago
  • Mayoral, Carmen
In response to the growing demand for renewable energy storage solutions, metal fuels have emerged as a promising alternative as recyclable energy carriers. These metals release energy through combustion, forming metal oxides, which can subsequently be regenerated into their metallic state using renewable hydrogen. Recent experimental studies have demonstrated the feasibility of self-sustaining combustion-oxidation of various finely ground metals. For the reduction step, established direct reduction iron (DRI) technology has been successfully used to convert solid iron ore into metallic iron without transitioning to the liquid phase. Through thermodynamic calculations conducted using Aspen, ensuring precise process modelling and efficiency evaluation, this study examines the technical feasibility and preliminary design of an energy storage system that employs iron as a metallic energy carrier. Iron undergoes oxidation and serves as a fuel in high-temperature reactors operating above 1200 °C, thereby releasing its stored energy and forming iron oxide. When hydrogen is available, the iron oxide can be reduced back to metallic iron through the well-established Direct Reduced Iron (DRI) process or a comparable method at approximately 750 °C. A round-trip thermal efficiency of 77.9 % has been calculated for the overall energy storage and utilization process. To further enhance global efficiency, key recommendations include hydrogen recirculation during the reduction process to ensure complete conversion and mitigating the impact of excess air in the oxidation stage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Apparent Kinetics for Direct Oxidation of Iron Particles Determined from Tests at High Temperature in a Flat Flame Reactor

  • Jiménez, Santiago
  • Mayoral, M. Carmen
  • Romeo, Luis M.
The results from experiments with 63–75 μm iron particles burning in high temperature gases in a flat flame reactor with 4–16% O2 are presented and compared with calculations, with the main goal of determining the vicinity of the measured oxidation rates to the external diffusion limit. The simulations consider oxygen diffusion through the particle’s boundary layer and encompass internal processes (diffusion, liquid convection, reaction, etc.) in the form of apparent kinetics in the outer surface of the particle. The main magnitudes monitored experimentally are particle temperature and especially its oxidation degree, based on the mass of oxygen absorbed; both are determined at different heights along the reactor, which results in detailed profiles with distance traveled or residence time. The assumption of combustion in the (external) diffusion limit notably overestimates the oxidation rate and the peak temperature of the particles. On the contrary, the introduction of different, progressively slower apparent kinetics for each oxidation stage, with Fe–O ratios corresponding to Fe → FeO → Fe3O4 → Fe2O3, results in an excellent agreement to the experimental data, particularly regarding the oxidation curves. The same kinetics are shown to fit equally well previous results obtained in tests with 75–90 μm, recently published by the authors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Behavior of iron and mineral magnetite particles in redox cycles including direct oxidation in a high temperature reactor

  • Jiménez, S.
  • Herrera, A.J.
  • Obras Loscertales, M. de las
  • Romeo, L.M.
The coupling of iron oxide reduction and its subsequent oxidation is a promising technology for energy storage and recovery. The evolution of the properties of the iron particles along successive cycles is an aspect of obvious relevance in this subject. In the present work, two materials, both sieved in the 75–90 µm range, have been studied: a commercial, pure iron powder, and an iron ore from a beneficiated mineral. Three complete cycles have been performed in uncoupled facilities: a fixed bed for reduction in H2, and a flat flame reactor at high temperature and moderate oxygen concentration for the oxidation stages. The analysis of the final products of each process shows steady compositions and morphologies, except for the first reduction step of the iron ore, slightly uncomplete and improved in subsequent cycles. A number of samples were also collected at intermediate oxidation degrees in the second cycle. The fast melting of the particles at the beginning of their oxidation serves as a real ‘starting point’, effectively deleting the previous particle’s story and the variations in morphology found at the end of the first cycle, and thus leading to very similar curves for particle temperature and oxidation degree vs. residence time. The evolution of the particle size distribution from this point, where a newly narrow distribution was observed, was similar to the one previously found for the original iron.