Pasar al contenido principal

TRANSICION DEL TRATAMIENTO DE AGUAS RESIDUALES HACIA LA ECONOMIA CIRCULAR Y LA SOSTENIBILIDAD MEDIANTE LA RECUPERACION DE RECURSOS Y AGUA DE CORRIENTES LIQUIDAS Y GASEOSAS

PID2022-142334OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Ultrafiltration and composite microfiltration biocatalytic membrane activity and steroid hormone micropollutant degradation at environmentally relevant concentrations

  • Imbrogno, Alessandra
  • Schmidt, Martin
  • Schulze, Agnes
  • Moreira Vilar, María Teresa
  • Schäfer, Andrea I.
Biocatalytic degradation of micropollutants has been extensively explored in both batch and membrane reactors in µg/L to mg/L concentrations and variable water compositions. The degradation of micropollutants by biocatalytic membranes at environmentally relevant concentrations of ng/L range found in natural surface water matrices has not yet been investigated, presumably because of the challenging concentration analysis. This study investigated the limitations of biocatalytic degradation of estradiol (E2) micropollutant at environmentally relevant concentrations by a biocatalytic membrane. The contributions of solute flux, hydraulic residence time (HRT) and water matrix composition on reaction kinetics, the apparent rate of disappearance (or reaction rate) and enzyme activity were examined. Two biocatalytic membranes were used: i) laccase entrapped in an ultrafiltration (UF) membrane support (namely UF-SNPs) and, ii) laccase covalently bound to the nanofiber matrix of a composite microfiltration (MF) membrane. The three main findings are reported. Firstly, the apparent rate of E2 disappearance decreases significantly by four orders of magnitude at a low micropollutant concentration of 0.1 µg/L, resulting in undetectable degradation during filtration, irrespective of the biocatalytic membrane. Secondly, the solute mass transfer and HRT control the biocatalytic degradation through the membranes resulting in different E2 removal. For the UF-SNPs membrane, a removal of 31 % is achieved only by increasing the concentration to 3000 µg/L and at a flux of 60 L/m².h (HRT of 4.5 s) due to an increase in solute flux by an order of magnitude similar to the apparent rate of disappearance. In contrast, the nano-MF membrane is ineffective in achieving biocatalytic degradation regardless of E2 concentration, as the HRT is approximately seven times lower (0.6 s) than that of the UF-SNPs, and thus insufficient for E2 to reach the catalytic site. Thirdly, the composition of the aqueous matrix plays a crucial role in the control of laccase activity irrespective of the membrane. Indeed, laccase is inactivated predominantly by chloride ions in synthetic carbonate buffer, since the typical NaCl concentration is about two orders of magnitude higher than E2 concentration. This study highlights that the slower kinetics achieved in the biocatalytic UF-SNPs and MF membranes are ineffective in removing steroid hormone micropollutants at realistic concentrations in surface water matrices. Further research is suggested to accelerate the reaction kinetics at such low concentrations and prolong the residence time within the membrane.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Eco-efficiency analysis of a continuous two-phase partitioning bioreactor treating 2,4-dichlorophenol synthetic wastewater

  • Estévez Rivadulla, Sofía
  • Mosca Angelucci, Domenica
  • Moreira Vilar, María Teresa
  • Tomei, Maria Concetta
Continuous two-phase partitioning bioreactors are a promising solution for removing poorly biodegradable pollutants, such as phenolic compounds, from wastewater. However, their combined economic and environmental feasibility has not yet been jointly evaluated, and it is crucial to ensure a minimum incorporation of sustainability aspects during design. For this purpose, four methodologies were employed. Standalone analyses were first conducted using Life Cycle Assessment and Life Cycle Costing, followed by an integrated environmental–economic sustainability assessment. The latter consisted of an eco-efficiency approach and a qualitative evaluation based on the principles of the EU Taxonomy, which functions as a key instrument within the European sustainable legal framework. The methodologies were applied to four scenarios in which the concentrations of 2,4-dichlorophenol, as targeted model phenolic compound, in the influent and the recycling ratio of the treated effluent were varied. The findings revealed that integrating recycling within the reactor resulted in a significant environmental burden across categories, with exception of ecotoxicity (with 98.2% decrease). Although the technology successfully achieved its removal objectives, the higher consumption of utilities required for proper reactor operation reduced the expected benefits. As for operating expenses, differences between scenarios were minimal due to the dominance of fixed costs, which remain constant in all cases. Comparatively, the technology aligned with performance metrics found in existing literature (around 13.7 kg CO2eq./m3 of treated wastewater and costs above 7.62 €/m3). To enhance the competitiveness of the technology, it is essential to manage energy demands for heating and aeration and to increase process automation, thereby reducing associated labor costs
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Semi-automated computational investigation of the oxidative degradation mechanisms of bisphenol A in Fenton-type processes

  • Chacón Morales, Pablo A.
  • Fernández Ramos, Antonio
  • González-Rodríguez, Jorge
  • Moreira Vilar, María Teresa
  • Martínez Núñez, Emilio
  • Ferro Costas, David
Bisphenol A (BPA) is a widespread industrial contaminant and endocrine disruptor whose efficient removal remains challenging because multiple, competing radical channels operate under Fenton-type advanced oxidation conditions. Here, we present a semi-automated first-principles approach to elucidate this process, comprising: (i) exhaustive discovery of unimolecular radical transformations with AutoMeKin; (ii) targeted manual construction of initial •OH addition and hydrogen-abstraction transition states; (iii) DFT refinement at ωB97XD/def2-TZVPP with SMD solvation model; (iv) selective microsolvation (up to two water molecules) for high potential energy barriers; (v) transition state theory rate constants evaluation for all elementary steps, and unified statistical treatment of dual bottlenecks for bimolecular •OH reactions; and (vi) Kinetic Monte Carlo (KMC) simulations with Pilgrim to obtain product distributions. The reaction network maps all feasible early •OH additions (ipso/ortho/meta/para), phenolic O–H abstraction, multistep hydroxylations, attempted dehydration steps, epoxidation, ring opening, and C–C scission leading to hydroxylated, quinonoid, lactone, and cleavage products. Selective microsolvation lowers critical rearrangement barriers, converting otherwise rate-determining steps into kinetically viable channels. KMC analysis identifies a characteristic ≈2:1 [•OH]:[BPA] threshold. Below it, early hydroxylated and ketone intermediates persist (e.g., catecholic and cyclohexadienone forms), whereas above it they are rapidly converted into trihydroxylated derivatives, ring-cleavage fragments, and quinone products. A reduced mechanism derived from sensitivity analysis reproduces the kinetics of the full network while retaining only essential OH-addition and phenolic H-abstraction steps. This integrated workflow thus provides mechanistic insight and a predictive, computationally efficient kinetic model readily transferable to other organic contaminants in advanced oxidation processes.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Hydrogen Sulfide Sensing Properties of CuXS-In Heterojunctions

  • Hafiene, Nesrine
  • Zribi, Rayhane
  • Espro, Claudia
  • Vázquez Vázquez, Carlos
  • Bouguila, Noureddine
  • Neri, Giovanni
In this paper, a study on the development of indium-doped CuxS heterojunction-based conductometry sensors is presented. To fabricate the sensors, thick films of In-CuxS heterojunctions were sprayed directly on the alumina sensing platform provided with interdigitated Pt electrodes. The effect of the doping level with different nominal amounts of InCl3 additive (0%, 3%, and 5%) on the structural, morphological and optical properties of CuxS films was first studied by XRD, AFM, UV-Vis and Raman spectroscopy. Moreover, the electrical and sensing characteristics towards low concentrations of hydrogen sulfide (H2S) in air were investigated. The tests carried out clearly demonstrated the positive effect of In doping on the H2S sensing performance of CuxS. The 5%-doped CuxS sensor showed the highest sensitivity to the target gas compared to the other sensor, as well as good stability and selectivity properties.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Two-step hybrid photo-thermochemical looping process, using metallic clusters on metal oxide carriers, for very efficient green hydrogen production, Proceso híbrido fototermoquímico de dos pasos, utilizando clústeres metálicos sobre soportes de óxido metálico, para la producción muy eficiente de hidrógeno verde

  • Nguyen, Anh Dung
  • Buceta Fernández, David
  • Dieste Places, Martín
  • López Quintela, Manuel Arturo
  • Schomäcker, Reinhard
In this work, we demonstrate a sustainable method for producing high-purity hydrogen through a two-step water-splitting process that leverages reducible oxides to store and release oxygen independently of hydrogen. Unlike conventional solar thermochemical (STCH) water-splitting techniques, which require extremely high temperatures exceeding 1000 °C, our approach operates at significantly lower temperatures—below ≈600 °C—thanks to a sunlight-driven photocatalyst composed of silver metal clusters (Ag5) supported on ceria and Ce–Zr oxygen storage materials. This lower-temperature operation not only reduces the demand for high-performance materials for the design of the process but also enhances safety, simplifies system design, and improves the long-term stability of both materials and equipment. Overall, this green technology offers an energy-efficient and environmentally responsible pathway for clean hydrogen production. Density-functional-theory calculations show that Ag5 clusters (1) enhance the photo-absorption, especially in the visible range, by increasing the gap states of the CeO2 surface, and decrease the oxygen vacancy formation energy (EVO) in certain positions around the clusters dramatically, and (2) create active sites in the Ag-CeO2 interface possessing lower reaction energy and activation barrier for the hydrogen evolution reaction. Guided by these studies, we demonstrate a cleaner and more energy-efficient hydrogen production process, achieving an average output of ≈55 mL per cycle (≈435 μmol g−1 h−1). This corresponds to an oxygen vacancy parameter δ ≈ 0.26 per cycle—about 51% of the theoretical maximum—significantly surpassing the performance of traditional high-temperature STCH methods. Notably, our process reaches a solar-to-hydrogen (STH) conversion efficiency of ≈9.7%, placing it at the upper end of the typical STCH range (1–10%) while operating at much lower, intermediate temperatures. These results highlight the strong potential of this greener approach to hydrogen production, offering high efficiency due to the utilization of a broader wavelength range of the solar light and a smaller environmental footprint. Additionally, the use of methane in the reduction cycle promotes the formation of oxygen vacancies, while selectively generating carbon monoxide. The two-step concept has the potential to convert biomethane into a higher-value syngas product, with the added benefit of producing extra hydrogen. This allows for the adjustment of the CO/H2 ratio, enabling subsequent Fischer–Tropsch processing for liquid fuel production.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Advancing the enzymatic removal of antibiotics with unspecific peroxygenase and vanadium chloroperoxidase

  • De Boer, Sabrina Rose
  • Sastre Quemada, Daniel
  • Castillo Zamora, Aly Jesús
  • Balboa Méndez, Sabela
  • Hollmann, Frank
  • Lores Aguín, Marta
  • Schäffer, Andreas
  • Moreira Vilar, María Teresa
Enzymatic processes for the remediation of wastewater containing organic pollutants are a promising alternative to advanced treatment processes that are often energy intensive and/or generate waste or by-products. For antibiotics, enzyme systems studied to date have been limited by substrate scope, pH tolerance, and stability. In this work, the remediation potential of two promiscuous H₂O₂-dependent enzymes is explored: the unspecific peroxygenase from Agrocybe aegerita (AaeUPO) and the chloroperoxidase from Curvularia inaequalis (CiVCPO), for the removal of four antibiotics commonly found in WWTP effluents and surface waters. While both enzymes showed a high removal potential for sulfamethoxazole (SMX) as a model antibiotic, CiVCPO was inactive in municipal wastewater, likely due to the presence of phosphate and nitrate. In contrast, AaeUPO remained active and stable within a suitable pH and temperature range. The transformation products showed decreased antibiotic activity against a susceptible strain of E. coli and decreased phytotoxicity, as indicated by the increased root length of Daucus carota. Peroxygenases are known to be sensitive to excess H₂O₂, and AaeUPO displays significant catalase activity at low substrate concentrations. To minimise H₂O₂-mediated inactivation, experiments were conducted at various H₂O₂ dosing rates in batch mode. Optimal conditions for the operation of a continuous enzymatic membrane reactor were then investigated, achieving over 95 % removal of SMX. This lays the groundwork for continuous operation and paves the way for efficient reactor design.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Assessing the environmental sustainability of decentralized photocatalytic treatment in healthcare facilities

  • Estévez Rivadulla, Sofía
  • González-Rodríguez, Jorge
  • Narváez-Prado, Isabella
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
The rapid increase in pharmaceutical pollutants in aquatic ecosystems has driven the need for innovative wastewater treatment solutions. This study evaluates the environmental performance of a Fe₃O₄/ZnO nanocomposite-based photocatalytic reactor, applied as a tertiary treatment for hospital wastewater. Life cycle assessment was used to compare four operational scenarios of the photocatalytic reactor, varying oxidant concentration and light intensity. The results show that the reactor is able to achieve 80 % removal efficiency for a complex wastewater mixture of nine micropollutants, meeting the standards outlined in the European legislation. However, compliance with legislation for some highly recalcitrant pollutants (e.g., trimethoprim) may require an increase in equipment size and operation time, resulting in a higher climate change impact (4.94 kg CO2/m3) if compared to other compounds that could be used as reference (e.g., 0.37–3.02 kg CO2/m3 for diclofenac and 17α-ethynylestradiol, respectively). Since most of the environmental impact of technology comes from the use of electricity in the lamps (65 % of the impact profile), strategies should be developed to offset this high resource demand. Ideally, the solutions should result in an environmental trade-off for freshwater ecotoxicity with lower impacts than direct discharge (3.6 CTUe/m3). While the variability between scenarios is in the range of 1.07–10.94 CTUe/m3, the most preferable option resulted in impacts in ecotoxicity of 2.79 CTUe/m3 and greenhouse gas emissions of 1.20 kg CO2eq./m3. This scenario not only resulted in lower direct and indirect environmental impacts on aquatic ecosystems compared to the case where no treatment was applied, but it also nearly fulfilled legislative requirements and remained competitive with other existing technologies such as solar-powered photocatalysis, photo-Fenton, electro-Fenton, and adsorption.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Sustainability in the treatment of wastewater from canning industry effluents

  • Cendán Pernas, Belinda
  • Arias Calvo, Ana
  • Estévez Rivadulla, Sofía
  • Artiga Acuña, Priscila
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
The treatment of wastewater from the fish canning industry presents specific challenges due to its high organic load and elevated salt and nutrient concentrations. This study combines modelling and real-world data from an operating industrial plant to evaluate the performance and environmental impact of a wastewater treatment plant located in Galicia, Spain, which treats effluent from a tuna canning factory. The treatment setup includes physical pretreatment, dissolved air flotation, sequential biological reactor, and sludge treatment units. Based on the simulation results, a Life Cycle Assessment (LCA) was applied using the ReCiPe Midpoint (H) methodology, considering eight environmental impact categories. The results indicate that the greatest impact corresponds to the power consumption of the sequencing batch reactor for aeration, which results into 6.75 kg CO2-eq./m3. The sensitivity analysis, which included different European electrical profiles and the replacement of the coagulant polyaluminium chloride with ferric chloride, identified significant opportunities for environmental improvement. In this regard, the climate change category may reach reductions up to 4.45 and 0.38 kg CO2-eq./m3, for energy and chemical substitutions respectively. This integrated approach demonstrates the potential of combining simulation and LCA as a decision-support tool to improve sustainability in industrial wastewater treatment in the canning sector.