Pasar al contenido principal

TECNICAS DE IMAGEN POR RESONANCIA MAGNETICA DE BAJO CAMPO PARA VISUALIZACION DE CRANEO Y TERMOMETRIA CEREBRAL

PID2022-142719OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Qualitative and quantitative hard-tissue MRI with portable Halbach scanners

  • Borreguero-Morata, José
  • de Castro Santos, Luiz Guilherme|||0000-0001-9121-4239
  • Vega-Cid, Lorena
  • Castañon-Garcia-Roves, Elisa
  • Marina
  • Pablo
  • Bosch-Esteve, Rubén|||0000-0002-7316-7819
  • Jesús
  • Pallás-Lodeiro, Eduardo
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Galve-Conde, Fernando
  • Garcia-Cristobal, Pablo
  • González-Cebrián, Alba
  • Guallart-Naval, Teresa
  • Porcar, Laia
  • Swistunow, Lucas
  • Alonso-Otamendi, Joseba
[EN] To demonstrate the feasibility of performing in-vivo imaging and quantitative relaxation mapping of soft and hard tissues using a low-cost, portable MRI scanner, and to establish the methodological foundations for zero echo time (ZTE) imaging in systems subject to strong field inhomogeneities. A complete framework for artifact-mitigated ZTE imaging at low field was developed, including: (i) RF pulse pre/counter-emphasis calibration to minimize ring-down and electronics switching time; (ii) an extension of a recent single-point double-shot (SPDS) protocol for simultaneous B¿ and B¿ mapping; and (iii) a model-based reconstruction incorporating these field maps into the encoding matrix. ZTE imaging and variable flip angle (VFA) T¿ mapping were performed on phantoms and in-vivo human knees and ankles, and benchmarked against standard RARE and STIR acquisitions. The optimized PETRA sequence produced 3D images of knees and ankles in < 15 min, revealing hard tissues such as ligaments, tendons, cartilage, and bone, usually not visible with standard sequences. The extended SPDS method was used for B¿ mapping, while the VFA approach provided the first in-vivo T¿ measurements of hard tissues at B¿ < 0.1 T. The proposed framework broadens the range of pulse sequences feasible in portable low-field MRI and demonstrates the potential of ZTE for quantitative and structural imaging of musculoskeletal tissues in affordable Halbach-based systems., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was funded by: the European Innovation Council (NextMRI 101136407), Ministerio de Ciencia e Innovación (PID2022- 142719OB-C22), and the Agència Valenciana de la Innovació under grant INNVA1/2023/30.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MaRGE: A graphical environment for MaRCoS

  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Borreguero-Morata, José
  • Galve-Conde, Fernando
  • Guallart-Naval, Teresa
  • Alonso-Otamendi, Joseba
[EN] The open -source console MaRCoS, which stands for "Magnetic Resonance Control System", combines hardware, firmware and software elements for integral control of Magnetic Resonance Imaging (MRI) scanners. Previous developments have focused on making the system robust and reliable, rather than on users, who have been somewhat overlooked. This work describes a Graphical User Interface (GUI) designed for intuitive control of MaRCoS, as well as compatibility with clinical environments. The GUI is based on an arrangement of tabs and a renewed Application Program Interface (API). Compared to the previous versions, the MaRGE package ("MaRCoS Graphical Environment") includes new functionalities such as the possibility to export images to standard DICOM formats, create and manage clinical protocols, or display and process image reconstructions, among other features conceived to simplify the operation of MRI scanners. All prototypes in our facilities are commanded by MaRCoS and operated with the new GUI. Here we report on its performance on an experimental 0.2 T scanner designed for hard -tissue, as well as a 72 mT portable scanner presently installed in the radiology department of a large hospital. The possibility to customize, adapt and streamline processes has substantially improved our workflows and overall experience., We thank Luis Marti-Bonmati, Amadeo Ten-Esteve and Sonia Gines-Cardenas from IIS La Fe for their clinical collaboration, and Dhareena Comlan for contributions to the post-processing MaRGE platform. Project funded by the European Innovation Council (grant number 101136407), Ministerio de Ciencia e Innovacion, Spain (PID2022-142719OB-C22), Agencia Valenciana de la Innovacion (INNVA1/20 22/4 and INNVA1/2023/30), and EURAMET, Europe (22HLT02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electromagnetic Noise Characterization and Suppression in Low-Field MRI Systems

  • Guallart-Naval, Teresa
  • Alonso-Otamendi, Joseba
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
[EN] Purpose: Our goal is to develop and validate a practical protocol that guides users in identifying and suppressing electromagnetic noise in low-field MRI systems, enabling operation near the thermal noise limit. Methods: We present a systematic, stepwise methodology that includes diagnostic measurements, hardware isolation strategies, and good practices for cabling and shielding. Each step is validated with corresponding noise measurements under increasingly complex system configurations, both unloaded and with a human subject present. Results: Noise levels were monitored through the incremental assembly of a low-field MRI system, revealing key sources of EMI and quantifying their impact. Final configurations achieved noise within 1.5× the theoretical thermal bound with a subject in the scanner. Image reconstructions illustrate the direct relationship between system noise and image quality. Conclusion: The proposed protocol enables low-field MRI systems to operate close to fundamental noise limits in realistic conditions. The framework also provides actionable guidance for the integration of additional system components, such as gradient drivers and automatic tuning networks, without compromising signal-to-noise ratio (SNR)., This work was supported by the European Innovation Council under grant 101136407, the Ministerio de Ciencia e Innovación of Spain under grant PID2022-142719OB-C22, and the European Partnership on Metrology under grant 22HLT02 A4IM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Subject grounding to reduce electromagnetic interference for MRI scanners operating in unshielded environments

  • Lena, Beatrice
  • de Vos, Bart
  • Guallart-Naval, Teresa
  • Parsa, Javad
  • García Cristóbal, Pablo
  • van den Broek, Ruben
  • Najac, Chloe
  • Alonso-Otamendi, Joseba
  • Webb, Andrew
[EN] Purpose Portable low-field (<0.1T) MRI is increasingly used for point-of-care imaging, but electromagnetic interference (EMI) presents a significant challenge, especially in unshielded environments. EMI can degrade image quality and compromise diagnostic utility. This study investigates whether subject grounding can effectively reduce EMI and improve image quality, comparing different grounding strategies. Methods Experiments were conducted using a 47 mT Halbach-based MRI scanner with a single receive channel. Reproducibility was evaluated at a second site using a 72 mT scanner with similar geometry. Turbo spin echo sequences were used to image the hand and brain. Subject grounding was implemented using conductive cloth sleeves or electrocardiography (ECG) electrodes, each connected between the subject's skin and scanner ground. Three EMI conditions were tested: ambient, added single-frequency EMI, and broadband EMI. SNRs were calculated under each configuration. Results Subject grounding significantly reduced EMI in both hand and brain scans. In hand imaging, conductive sleeves reduced noise from 85x to 1.25x the 50-ohm noise floor. In brain imaging, grounding alone reduced noise from 55x to 25x baseline; when combined with arc RF shields, noise was further reduced to 1.2x baseline, even under added EMI. These results were reproducible across different scanners and locations. Conclusion Subject grounding is a simple, effective, and reproducible strategy for mitigating EMI in portable low-field MRI. It is especially effective for hand imaging, while brain imaging benefits from additional RF shielding. The approach is robust under various EMI conditions and may complement other denoising techniques., Dutch Science Foundation Open Technology, Grant/Award Number: 18981; HORIZON EUROPE European Innovation Council, Grant/Award Number: EIC-Transition 101136407; Ministerio de Ciencia e Innovación y la Agencia Estatal de investigación, Grant/Award Number: PID2022-142719OB-C22; Horizon 2020 ERC Advanced Grant, Grant/Award Number: 670629
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elliptical Halbach magnet and gradient modules for low-field portable Magnetic Resonance Imaging

  • Galve-Conde, Fernando
  • Pallás-Lodeiro, Eduardo
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Borreguero-Morata, José
  • Bosch-Esteve, Rubén|||0000-0002-7316-7819
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Guallart-Naval, Teresa
  • García-Cristóbal, Pablo
  • Martínez, Pablo
  • Juan-Lloris, Francisco
  • Alonso-Otamendi, Joseba
[EN] This study aims to develop methods to design the complete magnetic system for a truly portable MRI scanner for neurological and musculoskeletal (MSK) applications, optimized for field homogeneity, field of view (FoV), and gradient performance compared to existing low-weight configurations. We explore optimal elliptic-bore Halbach configurations based on discrete arrays of permanent magnets. In this way, we seek to improve the field homogeneity and remove constraints to the extent of the gradient coils typical of Halbach magnets. Specifically, we have optimized a tightly packed distribution of magnetic Nd2Fe14B cubes with differential evolution algorithms and a second array of shimming magnets with interior point and differential evolution methods. We have also designed and constructed an elliptical set of gradient coils that extend over the whole magnet length, maximizing the distance between the lobe centers. These are optimized with a target field method minimizing a cost function that considers also heat dissipation. We have employed the new toolbox to build the main magnet and gradient modules for a portable MRI scanner designed for point-of-care and residential use. The elliptical Halbach bore has semi-axes of 10 and 14& cm, and the magnet generates a field of 87& mT homogeneous down to 5700& ppm (parts per million) in a 20-cm diameter FoV; it weighs 216& kg and has a width of 65& cm and a height of 72& cm. Gradient efficiencies go up to around 0.8& mT/m/A, for a maximum of 12& mT/m within 0.5& ms with 15& A and 15& V amplifier. The distance between lobes is 28& cm, significantly increased with respect to other Halbach-based scanners. Heat dissipation is around 25& W at maximum power, and gradient deviations from linearity are below 20% in a 20-cm sphere.Elliptic-bore Halbach magnets enhance the ergonomicity and field distribution of low-cost portable MRI scanners, while allowing for full-length gradient support to increase the FoV. This geometry can be potentially adapted for a prospective low-cost whole-body technology. A toolbox to develop optimal elliptic-bore Halbach magnets and gradients for easy industrializability is presented.The toolbox is used to develop an 87-mT magnetic resonance imaging (MRI) magnet for neurological and musculoskeletal (MSK) applications, with 216-kg weight, 44.5-cm length, 65-cm width, and full length gradients with 28-cm lobe-to-lobe distance.image, HORIZON EUROPE European Innovation Council; Ministerio de Ciencia e Innovacion; Agencia Valenciana de la Innovacio; European Innovation Council, Grant/Award Number:101136407; Ministerio de Ciencia e Innovacion of Spain, Grant/Award Number: PID2022-142719OB-C22; Generalitat Valenciana, Grant/Award Number: CIPROM/2021/003; Agencia Valenciana de la Innovacion, Grant/Award Numbers: INNVA1/2022/4, INNVA1/2023/30
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Imagen de tejidos duros en sistemas MRI de bajo campo

  • Borreguero-Morata, José
[ES] La salud bucodental es una parte integral de la salud general y su adecuada valoración es esencial para prevenir, diagnosticar y tratar diversas patologías. Disponer de técnicas de imagen médica permite a los profesionales de la odontología obtener una visión más completa y precisa de las estructuras internas de la boca, incluyendo los dientes, huesos maxilares, tejidos blandos y zonas adyacentes. Estas técnicas siempre complementan de un modo u otro la inspección visual y táctil realizada por los dentistas, proporcionando información crítica que no puede ser obtenida de otra manera. Históricamente, la visualización bucodental basada en la tecnología desarrollada por la ciencia ha estado ligada a los rayos-X desde su descubrimiento en 1895. No obstante, la comunidad médica es consciente de los riesgos inherentes al uso de radiación ionizante, que es muy susceptible de causar daño celular y aumentar el riesgo de cáncer a largo plazo. Este hecho siempre ha sido poco cuestionado entre los dentistas, en tanto que siempre se consideró que los beneficios de las radiografías en la detección y tratamiento de enfermedades dentales superan con creces los riesgos si se utilizan de manera apropiada. Sin embargo, la propia evolución de las tecnologías usadas en medicina lleva naturalmente a imaginar un escenario futuro donde las técnicas de rayos-X quedarán en desuso. Por ello, resulta ya relevante plantearse qué alternativas inocuas pueden ser adoptadas como sustitutos de los rayos-X sin perder en esta transición ninguna de las excelentes prestaciones que ofrecen estas últimas. En ese sentido, la Resonancia Magnética (MRI) es, de entre todas las técnicas no invasivas y libres de radiación ionizante, la de mayor potencial en cuanto a resolución y versatilidad exploratoria. A pesar de que es una tecnología muy restringida fundamentalmente por su altísimo coste económico e impacto logístico, ya ha sido demostrada su utilidad en sistemas de alto campo para un buen número de patologías endodónticas y periodónticas. En contraposición, las leyes físicas que rigen un experimento en MRI presentan limitaciones fundamentales cuando son aplicadas a los tejidos más duros del cuerpo, como son el esmalte y la dentina. Por ello, aquellas patologías que afectan al interior de la corona dental resultan invisibles en las imágenes de MRI. Por estas razones, el objetivo perseguido en esta tesis consiste en evaluar las posibilidades de alcanzar un prototipo de escáner MRI certificable clínicamente, de bajo coste y polivalente para la inspección bucodental, con capacidad de poder visualizar tanto tejidos duros como blandos. Este propósito presenta un doble desafío. Por una parte, el hecho de querer hacer un dispositivo MRI de bajo coste que derogue la falta de accesibilidad obliga a repensar completamente el hardware convencional usado en MRI, buscando minimizar su impacto, coste y mantenimiento. Por otro lado, para superar las limitaciones de la MRI cuando es aplicada a tejidos duros, se hace crucial desarrollar estrategias mucho más disruptivas para la codificación eficiente de los tejidos duros, que se alejan completamente de las secuencias de pulsos usadas comúnmente en la MRI clínica. Con las miras puestas en explorar los límites de la MRI aplicada a tejidos dentales, en esta tesis se ha abordado la construcción y validación de tres escáneres MRI de bajo campo magnético buscando una transición progresiva hacia el régimen in-vivo. En paralelo con el montaje de estos prototipos, se han abordado distintos estudios experimentales enfocados en aumentar la eficiencia de detección y reconstrucción de las señales de resonancia de los tejidos dentales tratando de exprimir las capacidades de la MRI frente a los rayos-X. Por tanto, esta tesis coloca una primera piedra en el posible escenario futuro de poder amparar la exploración bucodental exclusivamente a técnicas inocuas, accesibles y de altas prestaciones., [CA] La salut bucodental és una part integral de la salut general i la seva valoració adequada és essencial per a prevenir, diagnosticar i tractar diverses patologies. Disposar de tècniques d'imatge mèdica permet als professionals de l'odontologia obtenir una visió més completa i precisa de les estructures internes de la boca, incloent els dents, ossos maxil·lars, teixits tous i zones adjacents. Aquestes tècniques sempre complementen, d'una manera o altra, la inspecció visual i tàctil realitzada pels dentistes, proporcionant informació crítica que no pot ser obtinguda d'una altra manera. Històricament, la visualització bucodental basada en la tecnologia desenvolupada per la ciència ha estat lligada als raigs-X des del seu descobriment el 1895. No obstant això, la comunitat mèdica és conscient dels riscos inherents a l'ús de radiació ionitzant, que és molt susceptible de causar dany cel·lular i augmentar el risc de càncer a llarg termini. Aquest fet sempre ha estat poc qüestionat entre els dentistes, ja que sempre es va considerar que els beneficis de les radiografies en la detecció i tractament de malalties dentals superen amb escreix els riscos si s'utilitzen de manera apropiada. No obstant això, l'evolució mateixa de les tecnologies usades en medicina porta naturalment a imaginar un escenari futur on les tècniques de raigs-X quedaran en desús. Per això, resulta ja rellevant plantejar-se quines alternatives inocues poden ser adoptades com a substituts dels raigs-X sense perdre en aquesta transició cap de les excel·lents prestacions que ofereixen aquests últims. En aquest sentit, la Ressonància Magnètica (RM) és, entre totes les tècniques no invasives i lliures de radiació ionitzant, la de major potencial en quant a resolució i versatilitat exploratòria. Malgrat que és una tecnologia molt restringida fonamentalment pel seu altíssim cost econòmic i impacte logístic, ja ha estat demostrada la seva utilitat en sistemes d'alt camp per a un bon nombre de patologies endodòntiques i periodontals. En contraposició, les lleis físiques que regeixen un experiment en RM presenten limitacions fonamentals quan són aplicades als teixits més durs del cos, com són l'esmalt i la dentina. Per això, aquelles patologies que afecten l'interior de la corona dental resulten invisibles en les imatges de RM. Per aquestes raons, l'objectiu perseguit en aquesta tesi consisteix a avaluar les possibilitats d'assolir un prototip d'escàner RM certificable clínicament, de baix cost i polivalent per a la inspecció bucodental, amb capacitat de visualitzar tant teixits durs com tous. Aquest propòsit presenta un doble repte. D'una banda, el fet de voler fer un dispositiu RM de baix cost que superi la falta d'accessibilitat obliga a repensar completament el hardware convencional usat en RM, buscant minimitzar el seu impacte, cost i manteniment. D'altra banda, per superar les limitacions de la RM quan s'aplica a teixits durs, es fa crucial desenvolupar estratègies molt més disruptives per a la codificació eficient dels teixits durs, que s'allunyen completament de les seqüències de pulsos usades habitualment en la RM clínica. Amb la mirada posada en explorar els límits de la RM aplicada a teixits dentals, en aquesta tesi s'ha abordat la construcció i validació de tres escàners RM de baix camp magnètic buscant una transició progressiva cap al règim in-vivo. En paral·lel amb el muntatge d'aquests prototips, s'han abordat diferents estudis experimentals enfocats a augmentar l'eficiència de detecció i reconstrucció de les senyals de ressonància dels teixits dentals intentant exprémer les capacitats de la RM davant els raigs-X. Per tant, aquesta tesi posa una primera pedra en el possible escenari futur de poder emparar l'exploració bucodental exclusivament a tècniques innocues, accessibles i de grans prestacions., [EN] Oral health is an integral part of general health, and its proper evaluation is essential for preventing, diagnosing, and treating various pathologies. Having access to medical imaging techniques allows dental professionals to obtain a more complete and precise view of the internal structures of the mouth, including the teeth, jawbones, soft tissues, and adjacent areas. These techniques always complement, in one way or another, the visual and tactile examination carried out by dentists, providing critical information that cannot be obtained in any other way. Historically, dental visualization based on technology developed by science has been linked to X-rays since their discovery in 1895. However, the medical community is aware of the risks inherent in the use of ionizing radiation, which is highly susceptible to causing cellular damage and increasing the long-term risk of cancer. This fact has always been little questioned among dentists, as it was considered that the benefits of X-rays in detecting and treating dental diseases far outweigh the risks when used appropriately. However, the evolution of the technologies used in medicine naturally leads to imagining a future scenario where X-ray techniques will be obsolete. Therefore, it is already relevant to consider which harmless alternatives could be adopted as substitutes for X-rays without losing any of the excellent features they offer during this transition. In this regard, Magnetic Resonance Imaging (MRI) is, among all non-invasive techniques that are free of ionizing radiation, the one with the greatest potential in terms of resolution and exploratory versatility. Despite being a technology that is highly restricted, mainly due to its extremely high economic cost and logistical impact, its usefulness has already been demonstrated in high-field systems for a considerable number of endodontic and periodontal pathologies. In contrast, the physical laws governing an MRI experiment present fundamental limitations when applied to the harder tissues of the body, such as enamel and dentin. Therefore, those pathologies affecting the interior of the dental crown are invisible in MRI images. For these reasons, the goal pursued in this thesis is to assess the possibilities of achieving a clinically certifiable MRI scanner prototype that is low-cost and versatile for oral health inspection, with the capability of visualizing both hard and soft tissues. This goal presents a dual challenge. On one hand, the desire to create a low-cost MRI device that addresses the lack of accessibility requires a complete redesign of the conventional MRI hardware, aiming to minimize its impact, cost, and maintenance. On the other hand, to overcome the limitations of MRI when applied to hard tissues, it is crucial to develop much more disruptive strategies for the efficient encoding of hard tissues, completely deviating from the pulse sequences commonly used in clinical MRI. With the goal of exploring the limits of MRI applied to dental tissues, this thesis has addressed the construction and validation of three low-field MRI scanners, aiming for a progressive transition towards the in-vivo regime. In parallel with the assembly of these prototypes, various experimental studies have been carried out focused on increasing the efficiency of detection and reconstruction of resonance signals from dental tissues, trying to exploit MRI capabilities over X-rays. Therefore, this thesis lays the first stone in the possible future scenario of supporting dental exploration with harmless, accessible, and high-performance techniques., This work was supported by the Ministerio de Ciencia e Innovación of Spain through research grant PID2022-142719OB-C22 and European Innovation Council under grant 101136407. Action co-financed by the Agencia Valenciana de la Innovación (INNVA1/2022/4 and INN-VA1/2023/30). JB acknowledges support from the Innodocto program of the Agencia Valenciana de la Innovación (INNTA3/2021/17)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zero-echo-time sequences in highly inhomogeneous fields

  • Borreguero-Morata, José
  • Galve-Conde, Fernando
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Alonso-Otamendi, Joseba
[EN] Purpose: Zero-echo-time (ZTE) sequences have proven a powerful tool for MRI of ultrashort T-2 tissues, but they fail to produce useful images in the presence of strong field inhomogeneities (14 000 ppm). Here we seek a method to correct reconstruction artifacts from non-Cartesian acquisitions in highly inhomogeneous B-0, where the standard double-shot gradient-echo approach to field mapping fails. Methods: We present a technique based on magnetic field maps obtained from two geometric distortion-free point-wise (SPRITE) acquisitions. To this end, we employ three scanners with varying field homogeneities. These maps are used for model-based image reconstruction with iterative algebraic techniques (ART). For comparison, the same prior information is fed also to widely used Conjugate Phase (CP) algorithms. Results: Distortions and artifacts coming from severe B-0 inhomogeneities, at the level of the encoding gradient, are largely reverted by ourmethod, as opposed to CP reconstructions. This holds even close to the limit where intra-voxel bandwidths (determined by B-0 inhomogeneities, up to 1.2 kHz) are comparable to the encoding inter-voxel bandwidth (determined by the gradient fields, 625 Hz in this work). Conclusion: We have benchmarked the performance of a new method for ZTE imaging in highly inhomogeneous magnetic fields. For example, this can be exploited for dental imaging in affordable low-field MRI systems, and can be expanded for arbitrary pulse sequences and extreme magnet geometries, as in, for example, single-sided MRI., Ministerio de Ciencia e Innovacion, Grant/Award Number: PID2022-142719OB-C22; European Innovation Council, Grant/Award Number: EIC-Transition101136407; Agencia Valenciana de la Innovacio, Grant/Award Numbers: INNTA3/2021/17, INNVA1/2022/4, INNVA1/2023/30
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elliptical Halbach magnet and gradient modules for low-field portable magnetic resonance imaging

  • Galve, Fernando
  • Pallás, Eduardo
  • Guallart-Naval, Teresa
  • García-Cristóbal, Pablo
  • Arranz-Martínez, Pablo
  • Algarín, José M
  • Borreguero, Jose
  • Bosch, Rubén
  • Juan-Lloris, Francisco
  • Benlloch Baviera, José María
  • Alonso, Joseba
CODE AVAILABILITY: Codes for optimization of the main magnet, the shimming, and the gradient modules are available upon reasonable request and for noncommercial activities., This study aims to develop methods to design the complete magnetic system for a truly portable MRI scanner for neurological and musculoskeletal (MSK) applications, optimized for field homogeneity, field of view (FoV), and gradient performance compared to existing low-weight configurations. We explore optimal elliptic-bore Halbach configurations based on discrete arrays of permanent magnets. In this way, we seek to improve the field homogeneity and remove constraints to the extent of the gradient coils typical of Halbach magnets. Specifically, we have optimized a tightly packed distribution of magnetic Nd2Fe14B cubes with differential evolution algorithms and a second array of shimming magnets with interior point and differential evolution methods. We have also designed and constructed an elliptical set of gradient coils that extend over the whole magnet length, maximizing the distance between the lobe centers. These are optimized with a target field method minimizing a cost function that considers also heat dissipation. We have employed the new toolbox to build the main magnet and gradient modules for a portable MRI scanner designed for point-of-care and residential use. The elliptical Halbach bore has semi-axes of 10 and 14& cm, and the magnet generates a field of 87& mT homogeneous down to 5700& ppm (parts per million) in a 20-cm diameter FoV; it weighs 216& kg and has a width of 65& cm and a height of 72& cm. Gradient efficiencies go up to around 0.8& mT/m/A, for a maximum of 12& mT/m within 0.5& ms with 15& A and 15& V amplifier. The distance between lobes is 28& cm, significantly increased with respect to other Halbach-based scanners. Heat dissipation is around 25& W at maximum power, and gradient deviations from linearity are below 20% in a 20-cm sphere. Elliptic-bore Halbach magnets enhance the ergonomicity and field distribution of low-cost portable MRI scanners, while allowing for full-length gradient support to increase the FoV. This geometry can be potentially adapted for a prospective low-cost whole-body technology., This work was supported by the European Innovation Council under grant 101136407, the Ministerio de Ciencia e Innovación of Spain under grant PID2022-142719OB-C22, the Generalitat Valenciana under grant CIPROM/2021/003, and the Agencia Valenciana de la Innovación under grants INNVA1/2022/4 and INNVA1/2023/30. Funding for open access charge: CRUE-Universitat Politècnica de València., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MaRGE: A graphical environment for MaRCoS

  • Algarín Guisado, José Miguel
  • Guallart-Naval, Teresa
  • Borreguero, José
  • Galve, Fernando
  • Alonso Otamendi, Joseba
9 pages, 7 figures, download MaRGA package from https://github.com/yvives/PhysioMRI_GUI, The open-source console MaRCoS, which stands for "Magnetic Resonance Control System", combines hardware, firmware and software elements for integral control of Magnetic Resonance Imaging (MRI) scanners. Previous developments have focused on making the system robust and reliable, rather than on users, who have been somewhat overlooked. This work describes a Graphical User Interface (GUI) designed for intuitive control of MaRCoS, as well as compatibility with clinical environments. The GUI is based on an arrangement of tabs and a renewed Application Program Interface (API). Compared to the previous versions, the MaRGE package ("MaRCoS Graphical Environment") includes new functionalities such as the possibility to export images to standard DICOM formats, create and manage clinical protocols, or display and process image reconstructions, among other features conceived to simplify the operation of MRI scanners. All prototypes in our facilities are commanded by MaRCoS and operated with the new GUI. Here we report on its performance on an experimental 0.2 T scanner designed for hard-tissue, as well as a 72 mT portable scanner presently installed in the radiology department of a large hospital. The possibility to customize, adapt and streamline processes has substantially improved our workflows and overall experience., We thank Luis Martí-Bonmatí, Amadeo Ten-Esteve and Sonia Ginés-Cárdenas from IIS La Fe for their clinical collaboration, and Dhareena Comlan for contributions to the post-processing MaRGE platform. Project funded by the European Innovation Council (grant number 101136407), Ministerio de Ciencia e Innovación, Spain (PID2022-142719OB-C22), Agencia Valenciana de la Innovación (INNVA1/2022/4 and INNVA1/2023/30), and EURAMET, Europe (22HLT02)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zero-echo-time sequences in highly inhomogeneous fields

  • Borreguero, Jose
  • Galve, Fernando
  • Algarín, José M
  • Alonso, Joseba
[Purpose] Zero-echo-time (ZTE) sequences have proven a powerful tool for MRIof ultrashort T2 tissues, but they fail to produce useful images in the pres-ence of strong field inhomogeneities (14 000 ppm). Here we seek a method tocorrect reconstruction artifacts from non-Cartesian acquisitions in highly inho-mogeneous B 0 , where the standard double-shot gradient-echo approach to fieldmapping fails, [Methods] We present a technique based on magnetic field maps obtained fromtwo geometric distortion-free point-wise (SPRITE) acquisitions. To this end, weemploy three scanners with varying field homogeneities. These maps are usedfor model-based image reconstruction with iterative algebraic techniques (ART).For comparison, the same prior information is fed also to widely used ConjugatePhase (CP) algorithms., [Results] Distortions and artifacts coming from severe B0 inhomogeneities, atthe level of the encoding gradient, are largely reverted by our method, as opposedto CP reconstructions. This holds even close to the limit where intra-voxel band-widths (determined by B0 inhomogeneities, up to 1.2 kHz) are comparable tothe encoding inter-voxel bandwidth (determined by the gradient fields, 625 Hzin this work)., [Conclusion] We have benchmarked the performance of a new method for ZTEimaging in highly inhomogeneous magnetic fields. For example, this can beexploited for dental imaging in affordable low-field MRI systems, and can beexpanded for arbitrary pulse sequences and extreme magnet geometries, as in,for example, single-sided MRI., This work was supported by the Ministerio de Ciencia e Innovación of Spain through research grant PID2022-142719OB-C22 and the European Innovation Council (EIC-Transition 101136407). Action co-financed by the Agencia Valenciana de la Innovación (INNVA1/2022/4 and INNVA1/2023/30). JB acknowledges support from the Innodocto program of the Agencia Valenciana de la Innovación (INNTA3/2021/17)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Subject grounding to reduce electromagnetic interference for MRI scanners operating in unshielded environments

  • Lena, Beatrice
  • Vos, Bart de
  • Guallart-Naval, Teresa
  • Parsa, Javad
  • García-Cristóbal, Pablo
  • Broek, Ruben van den
  • Najac, Chloé
  • Alonso, Joseba
  • Webb, Andrew
Technical note., [Purpose] Portable low-field (<0.1T) MRI is increasingly used for point-of-care imaging, but electromagnetic interference (EMI) presents a significant challenge, especially in unshielded environments. EMI can degrade image quality and compromise diagnostic utility. This study investigates whether subject grounding can effectively reduce EMI and improve image quality, comparing different grounding strategies., [Methods] Experiments were conducted using a 47 mT Halbach-based MRI scanner with a single receive channel. Reproducibility was evaluated at a second site using a 72 mT scanner with similar geometry. Turbo spin echo sequences were used to image the hand and brain. Subject grounding was implemented using conductive cloth sleeves or electrocardiography (ECG) electrodes, each connected between the subject's skin and scanner ground. Three EMI conditions were tested: ambient, added single-frequency EMI, and broadband EMI. SNRs were calculated under each configuration., [Results] Subject grounding significantly reduced EMI in both hand and brain scans. In hand imaging, conductive sleeves reduced noise from 85× to 1.25× the 50-ohm noise floor. In brain imaging, grounding alone reduced noise from 55× to 25× baseline; when combined with arc RF shields, noise was further reduced to 1.2× baseline, even under added EMI. These results were reproducible across different scanners and locations., [Conclusion] Subject grounding is a simple, effective, and reproducible strategy for mitigating EMI in portable low-field MRI. It is especially effective for hand imaging, while brain imaging benefits from additional RF shielding. The approach is robust under various EMI conditions and may complement other denoising techniques., Dutch Science Foundation Open Technology 18981. Ministerio de Ciencia e Innovación of Spain (PID2022-142719OB-C22). European Innovation Council (EIC-Transition 101136407). Horizon 2020 ERC Advanced Grant (670629)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electromagnetic Noise Characterization and Suppression in Low-Field MRI Systems

  • Guallart-Naval, Teresa
  • Algarín Guisado, José Miguel
  • Alonso, Joseba
This is a protocol for optimizing the performance of low-field MRI scanners. If you use it, please give us feedback!, Purpose Our goal is to develop and validate a practical protocol that guides users in identifying and suppressing electromagnetic noise in low-field MRI systems, enabling operation near the thermal noise limit. Methods We present a systematic, stepwise methodology that includes diagnostic measurements, hardware isolation strategies, and good practices for cabling and shielding. Each step is validated with corresponding noise measurements under increasingly complex system configurations, both unloaded and with a human subject present. Results Noise levels were monitored through the incremental assembly of a low-field MRI system, revealing key sources of EMI and quantifying their impact. Final configurations achieved noise within 1.5× the theoretical thermal bound with a subject in the scanner. Image reconstructions illustrate the direct relationship between system noise and image quality. Conclusion The proposed protocol enables low-field MRI systems to operate close to fundamental noise limits in realistic conditions. The framework also provides actionable guidance for the integration of additional system components, such as gradient drivers and automatic tuning networks, without compromising signal-to-noise ratio (SNR)., This work was supported by the European Innovation Council under grant 101136407, the Ministerio de Ciencia e Innovación of Spain under grant PID2022-142719OB-C22, and the European Partnership on Metrology under grant 22HLT02 A4IM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In Vivo Imaging With a Low-Cost MRI Scanner and Cloud Data Processing in Low-Resource Settings

  • Guallart-Naval, Teresa
  • Asiimwe, Robert
  • Tusiime, Patricia
  • Nassejje, Mary
  • Kinyera, Leo
  • Robin, Lemi
  • Nayebare, Maureen
  • Santos, Luiz
  • Fernández-García, Marina
  • Swistunow, Lucas
  • Algarín Guisado, José Miguel
  • Stairs, John
  • Hansen, Michael
  • Amodoi, Ronald
  • Webb, Andrew
  • Harper, Joshua
  • Schiff, Steven
  • Obungoloch, Johnes
  • Alonso, Joseba
[Data Availability Statement] The data that support the findings of this study are available from the corresponding author upon reasonable request., The goal of this work is to demonstrate in vivo imaging with a low-cost, low-field MRI scanner built and operated in Africa and to show how systematic hardware and software improvements can mitigate the main operational limitations encountered in low-resource environments. To this end, a 46-mT Halbach scanner located at the Mbarara University of Science and Technology (Uganda) was upgraded through a complete reorganization of grounding and shielding, installation of new control electronics, and open-source user-interface software. Noise performance was quantified using a standardized protocol and in vivo brain images were acquired with three-dimensional RARE sequences. Distortion correction was implemented using cloud-based reconstructions incorporating magnetic field maps. The revamped system reached noise levels routinely below three times the thermal limit and demonstrated stable operation over multi-day measurements. Three-dimensional T 1$$ {}_1 $$ - and T 2$$ {}_2 $$ -weighted brain images were successfully acquired and distortion-corrected with remote GPU-based reconstructions and near real-time visualization through the user interface. The results show that low-cost MRI systems can achieve clinically relevant image quality when electromagnetic noise and power-grid instabilities are properly addressed. This work highlights the feasibility of sustainable MRI development in low-resource settings and identifies stable power delivery and local capacity building as the key next steps toward clinical translation., This work was supported by Ministerio de Ciencia e Innovación (PID2022-142719OB-C22), the European Innovation Council (NextMRI 101136407), the ISMRM-Gates Knowledge Exchange Program (91484), and US NIH grant 5R01HD085853-1., Peer reviewed