Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bacillus thuringiensis derived biopesticides from biowaste digestate at 290-L demonstration scale through solid-state fermentation

  • Mejías, Laura|||0000-0003-0675-0702
  • Ruiz, Daniel
  • Molina Peñate, Esther|||0000-0001-9590-4739
  • Barrena, Raquel|||0000-0002-6077-7765
  • Gea, Teresa|||0000-0003-2523-4797
This study faces the challenge of scaling up and validating the production of Bacillus thuringiensis (Bt) derived biopesticides at both pilot (100-L) and demonstrative scale (290-L), following a novel operation strategy for solid-state fermentation (SSF) based on two consecutive and differentiate aeration stages. Digestate and vegetable biowaste served as the carbon and nutrient source for Bt growth and sporulation. The operation strategy, which combines an anoxic and an aerobic phase, was successfully implemented at the pilot scale, achieving proper temperature control, which is crucial for SSF development at commercial scale. A total final concentration of spores was achieved on the order of 10 spores per gram of dry matter with a production ratio of 2.4 spores per inoculated Bt viable cell. Results at the demonstrative scale were hindered, likely due to the alteration of the anoxic environment during reactor sampling and the longer anoxic time. The fermented solids with biopesticidal properties, could be considered compost-like amendments exhibiting good maturity based on low respirometric indices and phytotoxicity. This study underscores the importance of addressing these challenges to enhance the sustainability of biowaste management practices and promote the transition towards a circular economy model.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Modeling Parallel AI Applications for Performance Analysis on Cloud Environments

  • Albert, Miquel
  • Wong, Álvaro|||0000-0002-8394-9478
  • León, Betzabeth|||0000-0003-1778-0237
  • Rexachs, Dolores|||0000-0001-5500-850X
  • Luque, Emilio|||0000-0002-2884-3232
In high-performance computing (HPC) environments, efficient execution of AI applications is critical for optimal performance and resource utilization. In this work, we extend the PAS2P methodology to AI applications through message passing on HPC Cloud systems, defining the AI Application Model to describe their performance behavior. This extension identifies phases within AI applications, enabling analysis to focus on these phases instead of the entire application. By concentrating on them, we can better evaluate AI application efficiency, providing insights into system performance and guiding future optimizations for large-scale AI tasks on HPC infrastructure.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Trickle-bed reactor for solid-substrate fermentation, Overcoming nutrient distribution limitations in sophorolipid production

  • Bueno-Mancebo, Jose|||0009-0005-7740-8690
  • Gea, Teresa|||0000-0003-2523-4797
  • Artola, Adriana|||0000-0002-0524-2119
  • Barrena, Raquel|||0000-0002-6077-7765
Solid-state fermentation (SSF) represents a sustainable alternative for the bioconversion of solid food waste and agricultural by-products; however, its industrial implementation is limited by mass and temperature gradients across the solid bed. To address these challenges, this study evaluates a trickle-bed reactor configuration as a means to intensify SSF through the introduction of a trickling liquid phase. This study approaches a conceptual shift from solid-state to solid-substrate fermentation (SSuF) processes to produce sophorolipids, biosurfactants synthesised by Starmerella bombicola. The effect of glucose concentration and delivery method under SSuF conditions is assessed to explore its potential for process optimisation. A Box-Behnken design was employed to assess the effects of glucose concentration, trickling time, and trickling frequency on yeast growth and product yield in 0.5 L bioreactors. Under optimised conditions (4.2 g glucose, 300 mL recirculating volume, 24 min trickling, 24 cycles/day), viable cell counts increased by 45.4 %. Different trickling operation modes were tested to assess the influence of trickling duration and timing on sophorolipid production under optimised conditions. Furthermore, the inclusion of yeast extract and urea in the trickling solution led to a 31.2 % increase in sophorolipids production compared to solid-state fermentation controls. The SSuF approach enhances nutrient distribution and enables monitoring through liquid phase analysis - offering a scalable and robust strategy for microbial fermentation processes from low-cost solid feedstocks in line with circular bioeconomy objectives.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Addressing temperature gradient challenge in scaling up solid-state fermentation, A strategy using thermophilic strains for biosurfactant production

  • Bueno-Mancebo, Jose|||0009-0005-7740-8690
  • Artola, Adriana|||0000-0002-0524-2119
  • Farooq, Syeda Amna|||0009-0001-5311-8606
  • Barrena, Raquel|||0000-0002-6077-7765
  • Gea, Teresa|||0000-0003-2523-4797
Solid-state fermentation (SSF) is a promising approach for sustainable bioproduction production, particularly when using organic waste as a substrate. However, temperature gradients inherent to large-scale SSF often reduce process efficiency. This study developed a strategy for designing of a lipopeptide biosurfactant production process, scaling SSF in packed-bed bioreactors by thermophilic strains using winterisation oil cake (WOC) and sugarcane molasses (MOL) as nutrient sources. Fermentations at lab-scale (0.5 L) and pilot-scale (50 L) demonstrated a robust and reproducible process despite temperature changes from microbial activity. Among the strains tested, Bacillus subtilis CBI-7S1 was the highest producer, with optimal substrates amounts of 24 g of WOC and 12 g of MOL, producing 24.9 mg of crude lipopeptides per gram of dry matter (DM) at 0.5 L scale. These conditions were reproduced at pilot scale, with concentrations from 12 to 24 mg g DM. Moisture content strongly influenced biosurfactant production, while oxygen consumption was a reliable monitoring parameter. Surface tension was evaluated under different pH, temperature, and salinity, and mass spectrometry identified surfactin, iturin, and fengycin congeners. These findings provide insights into overcoming temperature gradients during scale-up and show that thermophilic strains enable biosurfactant production under SSF at pilot scale. This approach enhances SSF technological maturity, supporting its broader use in sustainable production of targeted metabolites across diverse bioprocesses.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Alternative extraction strategies for biosurfactants produced by solid-state fermentation from organic waste

  • Oiza, Nicolás|||0000-0003-4929-4057
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Mendiola, Jose|||0000-0001-6709-349X
  • Ibañez, Elena|||0000-0003-2127-8303
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Sánchez Bonastre, Armando|||0000-0001-9160-1124
  • Gea, Teresa|||0000-0003-2523-4797
This study investigates alternative extraction techniques in solid-state fermentation of organic substrates. Extracting from a solid matrix is a significant downstream processing challenge, as most technologies are adapted from those used in submerged fermentation without accounting for the solid matrix's intrinsic properties. In this study, extraction of sophorolipids (SL) through conventional ethyl acetate solvent extraction (maceration) was compared to pressurized liquid extraction (PLE) and ultrasound-assisted extraction (UAE). SL are especially relevant not only as potential substitutes to some traditional surfactants but also because of their interesting antimicrobial and anti-cancer properties. All strategies used both ethyl acetate and ethanol to reveal the effect of the solvent on the processes. In this study, PLE with ethyl acetate achieved the highest crude SL yields (0.443 g crude SL/g dry fermented solid). UAE yielded results similar to traditional extraction but reduced the time from 2 h to 30 min; while ethyl acetate generally resulted in higher total crude extracts, ethanol improved SL extraction across all methods. PLE using ethanol achieved the highest SL yields with high purity (0.063 g final extract/g dry fermented solid and 62 % SL content). Afterwards, supercritical fluid extraction with CO (SFE-CO) was employed to selectively remove fatty acids and oils from the fermented solids as a pretreatment step before SL extraction. This improved SL recovery, and by performing a sequential ethanol PLE after SFE-CO in the same cell, a 308 % increase in extracted SL yield was achieved compared to traditional solvent extraction with ethyl acetate. This approach also showed itself to be the greenest one following the Path2green methodology and considering solvent consumption. This research shows that PLE, SFE, and UAE are promising, more sustainable, and efficient alternatives to traditional solvent extraction.