Pasar al contenido principal

FERMENTACION EN ESTADO SOLIDO EN LA BIOECONOMIA CIRCULAR. AVANCE Y ESCALADO PARA BIOSURFACTANTES, BIOPESTICIDAS Y BIOESTIMULANTES A PARTIR DE SUBPRODUCTOS AGROALIMENTARIOS

PID2023-146978OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Preliminary Comparison of Different EDs Performance, Using Simulation

  • Galeano Galeano, Ramona Elizabeth|||0009-0007-0272-1281
  • Wong, Álvaro|||0000-0002-8394-9478
  • Rexachs, Dolores|||0000-0001-5500-850X
  • Suppi, Remo|||0000-0002-0373-8292
  • Bruballa, Eva|||0000-0002-5094-3563
  • Epelde, Francisco|||0000-0001-5547-4025
A reference model is a model of something that contains a fundamental objective or idea of something and can be established as a reference for multiple purposes. We performed an analysis based on a reference model following the Spanish Ministry of Health's document of standards and recommendations to achieve better care, efficiency, and uniformity in emergency services. This standard describes the guidelines and resources needed in hospital emergency services for better patient care. We also analyzed the standards of emergency services in the following countries: the United States, the United Kingdom, Germany, Canada, Paraguay, Argentina, the United Arab Emirates, and Turkey. The objective of the research is to analyze the efficiency of the Spanish model following its reference standard compared to the standards of other countries, to explore how the Spanish emergency service would work using the parameters of the emergency service standards compared to the standards of different countries, specifically the KPI we analyzed is the Door to the Doctor (DtD), through simulation. It was concluded that in some countries, DtD times improve compared to the Spanish reference standard, and in some cases, they worsen.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

A Customizable Agent-Based Simulation Framework for Emergency Departments

  • Mesas Cervilla, Francisco|||0009-0007-9399-6298
  • Taboada González, Manuel
  • Rexachs, Dolores|||0000-0001-5500-850X
  • Epelde, Francisco|||0000-0001-5547-4025
  • Wong, Álvaro|||0000-0002-8394-9478
  • Luque, Emilio|||0000-0002-2884-3232
Emergency Departments (EDs) face increasing complexity due to rising patient demand, resource constraints, and the need for efficient service coordination. Traditional simulation models, while useful, cannot be easily adapted to a different hospital environments, making it difficult to transfer and scale solutions. Based on previous work, with a simulator working in a hospital, this work describes a modular Agent-Based Modeling and Simulation (ABMS) approach for increasing flexibility adaptation and reuse in ED simulations. The proposed technique, which deconstructs existing models into individual components, will allow hospitals with different workflows and operational constraints to construct customized simulations. To validate this methodology, we develop a structured, modular framework using NetLogo and Python. The suggested metasystem enables adaptive simulation-based decision assistance for emergency departments, which improves resource allocation and operational planning.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pseudoxanthomonas taiwanensis and Pseudomonas thermotolerans, Novel Thermophilic Amylase Producers in Solid-State Fermentation

  • Taulé, Anna
  • Gea, Teresa|||0000-0003-2523-4797
  • Cerda Llanos, Alejandra Patricia|||0000-0001-8904-1586
  • Molina Peñate, Esther|||0000-0001-9590-4739
Amylases are key industrial enzymes, and thermostable variants are particularly valuable for robust bioprocessing. This study investigates amylase production via solid-state fermentation (SSF) using non-sterile potato peel as substrate, comparing the performance of the autochthonous microbial population with that of the inoculated fungus Thermomyces lanuginosus. Non-inoculated batch reactors reached maximum productivities of 3920 U g¹DM day¹, more than double of the inoculated ones (1823 U g¹DM day¹), highlighting the potential of native thermophiles. Sequential batch reactor (SBR) strategies were applied to promote microbial selection and monitor T. lanuginosus persistence over seven cycles. Although the inoculum initially increased overall microbial activity (sOUR), T. lanuginosus was not detected, and no sustained improvement in amylase productivity was observed. Three thermophilic amylase-producing strains were isolated: Bacillus coagulans, Pseudoxanthomonas taiwanensis, and Pseudomonas thermotolerans, the last two being newly reported amylase producers. These findings demonstrate that efficient, scalable amylase production can be achieved through non-sterile SSF relying on native microbial communities, supporting circular bioeconomy strategies and potentially reducing the need for external inoculation. Further work is needed to confirm the generalizability of these results and to better understand the interactions between inoculated and native strains.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Flavonoid production via solid-state fermentation of agro-industrial waste with biopesticidal fungi, screening, optimization and scale-up

  • Ribeiro de Oliveira, Fabíola|||0000-0001-5152-3467
  • Sala, Arnau|||0000-0001-7010-6984
  • Okino-Delgado, Clarissa|||0000-0002-8750-7298
  • Gea, Teresa|||0000-0003-2523-4797
  • Casciatori, Fernanda
Flavonoids are bioactive compounds with significant applications in agriculture due to their antimicrobial properties, ability to mitigate abiotic stress and role in promoting plant-microbe interactions. This study explores the potential of producing flavonoids through solid-state fermentation (SSF) using agro-industrial residues as substrates for filamentous fungi. Trichoderma harzianum, Trichoderma viride and Beauveria bassiana were evaluated for their ability to increase total flavonoids content on different substrates, in a screening process at laboratory scale, achieving a production of 0.53 ± 0.09 mg of total flavonoids per gram of dry matter (mg gdm) with T. harzianum in a blend of 30% spent coffee grounds (SCG) and 70% brewers spent grain (BSG) as carbon source. Subsequently, the bioprocess was optimized on 0.5 L packed bed bioreactors regarding cultivation time and productivity. A design of experiments was conducted to evaluate the influence of substrate composition and moisture content on the production of the desired metabolites, as well as the effect of temperature variation, resulting in an increase in total flavonoid production to 0.75 ± 0.14 mg gdm. Finally, the process was scaled-up under optimized conditions in a 22 L packed bed bioreactor, reaching a production of 0.43 ± 0.07 mg gdm. These results demonstrate the feasibility of valorizing agro-industrial residues through SSF using biopesticidal fungi, providing a scalable bioprocess to produce flavonoid-rich bioinputs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A comprehensive methodology for parameter assessment in solid-state fermentation modelling

  • Carrasco García, Anna|||0000-0001-6215-5364
  • Guisasola, Albert|||0000-0002-3012-7964
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Gea, Teresa|||0000-0003-2523-4797
Solid-state fermentation (SSF) is a promising technology for bioproduct generation within a circular bioeconomy framework, but its commercial application remains limited by heat and mass transfer constraints. In this study, we present a comprehensive experimental methodology for estimating key parameters required for modelling SSF processes. The objective of this study is to establish an experimental methodology for determining model parameters and, through a sensitivity analysis, evaluate their influence on the validation of a mathematical model for SSF processes. Using sophorolipid (SL) production by Starmerella bombicola as a case study, we determine thermal properties, kinetic parameters, and transfer coefficients, and validate them through temperature profile simulations in a 22-L bioreactor. The experimentally determined values were: specific heat capacity of 1.55 J g °C, thermal conductivity of 0.127 W m ºC, heat transfer coefficient of 9790 ± 2.25 W m ºC, mass transfer coefficient 0.00189 ± 0.00078 s, metabolic heat yield of 1.34 × 10 J kg biomass and a specific growth rate of 0.389 h. A sensitivity analysis identifies microbial growth kinetics and heat yield as the most critical parameters influencing model accuracy, while thermal and transport parameters show low sensitivity. This integrated approach provides both a robust modelling framework and specific values applicable to SSF-based SL production, supporting scale-up efforts and adaptation to other solid matrices or microbial systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Understanding the effects of glycolipid biosurfactants produced through the solid-state fermentation of organic waste on the anaerobic digestion of biowaste

  • Oiza, Nicolás|||0000-0003-4929-4057
  • Bueno-Mancebo, Jose|||0009-0005-7740-8690
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Barrena, Raquel|||0000-0002-6077-7765
  • Artola, Adriana|||0000-0002-0524-2119
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Gea, Teresa|||0000-0003-2523-4797
This study examined the effects of two different microbial glycolipid biosurfactants on the anaerobic digestion of source-selected biowaste. Sophorolipids and mannosylerythritol lipids were produced through solid-state fermentation using a combination of wheat straw, molasses, and winterization oil cake. The characterization of the biosurfactants was conducted via liquid chromatography-mass spectrometry, which revealed their diverse configurations, highlighting the importance of the purification of biosurfactants produced from waste. When utilized as additives in anaerobic digestion, both sophorolipids and mannosylerythritol lipids demonstrated high biodegradability, facilitating the degradation of recalcitrant matter in the absence of readily biodegradable substrates. Sophorolipids yielded 785-800 mL of methane per gram added, depending on the purification level. Meanwhile, mannosylerythritol lipids produced 948 mL of methane per gram added. Overall, addition of biosurfactants lowered methane production when taking their own production into account, highlighting a key control that many other studies lack. Furthermore, in conjunction with biowaste, sophorolipids augmented the initial concentration of volatile fatty acid by 52%. Sophorolipids showed a high inhibition of the methanogenesis process. A complete microbial analysis of selected samples revealed distinct changes in community composition, with sophorolipids favouring hydrolytic and acidogenic populations, while mannosylerythritol lipids increased methanogenic Archaea. This fact can have important implications in the further use of these additives to improve biowaste AD. In the case of novel biosurfactants such as sophorolipids and mannosylerythritol lipids, which are produced from organic waste, it is evident that there is a lack of studies supporting their effectiveness in anaerobic digestion and their biodegradability in such environments, as well as the real consequences of adding them.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Emerging Solid-State Fermentation in Functional Foods, Bioactive Compounds, Functionality, Sensory Quality, Microbiota Influence and Industrial Perspectives

  • Bueno-Mancebo, Jose|||0009-0005-7740-8690
  • Artola, Adriana|||0000-0002-0524-2119
  • Barrena, Raquel|||0000-0002-6077-7765
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Gea, Teresa|||0000-0003-2523-4797
Although solid-state fermentation (SSF) has long been used in food production in various traditional contexts, it is now emerging as a particularly promising strategy for the development of functional food ingredients from plant materials and agro-industrial side streams. This review examines recent advances in the application of SSF to enhance the nutritional, functional, sensory, and technological properties of food matrices. Current evidence indicates that SSF can increase the bioactive potential of plant-based substrates by promoting the release and biotransformation of phenolic compounds, while also improving antioxidant capacity, protein digestibility, and techno-functional performance. In addition, the process may support the formation of food-relevant metabolites, including vitamins, peptides, organic acids, and other secondary compounds, while reducing selected antinutritional, allergenic, and undesirable constituents. These compositional changes are often accompanied by modifications in aroma, volatile profiles, visual attributes, and, more recently, gut microbiota-related effects. Attention is given to the use of fungal-based processes for the valorization of cereals, legumes, fruit by-products, and other underutilized substrates. The review also addresses the growing industrial interest in SSF, especially in relation to mycelium-based foods, alternative proteins, functional ingredients, and feed applications. Despite its clear potential, the broader implementation of SSF will require further research and development to support its effective translation into food applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alternative extraction strategies for biosurfactants produced by solid-state fermentation from organic waste

  • Oiza, Nicolás
  • Moral-Vico, Javier
  • Mendiola, J. A.
  • Ibáñez, Elena
  • Sánchez, Antoni
  • Gea, Teresa
Data will be made available on request., This study investigates alternative extraction techniques in solid-state fermentation of organic substrates. Extracting from a solid matrix is a significant downstream processing challenge, as most technologies are adapted from those used in submerged fermentation without accounting for the solid matrix's intrinsic properties. In this study, extraction of sophorolipids (SL) through conventional ethyl acetate solvent extraction (maceration) was compared to pressurized liquid extraction (PLE) and ultrasound-assisted extraction (UAE). SL are especially relevant not only as potential substitutes to some traditional surfactants but also because of their interesting antimicrobial and anti-cancer properties. All strategies used both ethyl acetate and ethanol to reveal the effect of the solvent on the processes. In this study, PLE with ethyl acetate achieved the highest crude SL yields (0.443 g crude SL/g dry fermented solid). UAE yielded results similar to traditional extraction but reduced the time from 2 h to 30 min; while ethyl acetate generally resulted in higher total crude extracts, ethanol improved SL extraction across all methods. PLE using ethanol achieved the highest SL yields with high purity (0.063 g final extract/g dry fermented solid and 62 % SL content). Afterwards, supercritical fluid extraction with CO2 (SFE-CO2) was employed to selectively remove fatty acids and oils from the fermented solids as a pretreatment step before SL extraction. This improved SL recovery, and by performing a sequential ethanol PLE after SFE-CO2 in the same cell, a 308 % increase in extracted SL yield was achieved compared to traditional solvent extraction with ethyl acetate. This approach also showed itself to be the greenest one following the Path2green methodology and considering solvent consumption. This research shows that PLE, SFE, and UAE are promising, more sustainable, and efficient alternatives to traditional solvent extraction., This work received financial support from the Spanish Ministerio de Ciencia e Innovación (Project PID2023-146978OB-100, Solstice, Project PID2020-113050RB-I00, SuspiciousMinds, and Project PID2020-113050RB-I00, Surfing waste)., Peer reviewed