Pasar al contenido principal

EXPLORANDO LA APLICACION DE BIOCHAR PARA MEJORAR LA GESTION DEL ESTIERCOL MEDIANTE LA OPTIMIZACION DEL BIOGAS, LA REDUCCION DE EMISIONES Y LA RECUPERACION DE RECURSOS.

PID2023-147405OR-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario INSTITUT DE RECERCA I TECNOLOGIA AGROALIMENTARIES (IRTA)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Determination of Carbon Dioxide by Gas Chromatography Using an Electron Capture Detector for the Analysis of Greenhouse Gases: A Comparison and Validation with the Standard Method

  • Noguerol-Arias, Joan
  • Bonmati, August
  • Prenafeta-Boldú, Francesc Xavier
  • Cerrillo, Míriam
This study reports the development of a novel analytical method for the determination of carbon dioxide (CO2) along with the other main greenhouse gases (GHG)‒methane (CH4) and nitrous oxide (N2O)‒ from environmental samples by gas chromatography (GC) using an electron capture detector (ECD). This new method was compared and validated with the standard GC method for the determination of CO2 using a thermal conductivity detector (TCD). The main performance parameters considered for the validation of an analytical method were evaluated: selectivity/specificity, linearity/working range, precision, trueness, limit of detection (LOD) and limit of quantitation (LOQ). This comparison was carried out using gas standards, reference materials and environmental samples containing GHG. Both the ECD- and TCD-based chromatographic analytical methods displayed a similar precision (3.1–3.4 %) and accuracy (101–106 %) for CO2 analysis. Although the LOQ for the ECD detector is higher than that of the TCD detector (300 vs. 99 µmol mol⁻¹), it is still sufficient for the analysis of most GHG samples. Once validated, the new analytical method was used for the simultaneous determination of CO2, CH4 and N2O in gaseous samples obtained from a wide range of conditions and agricultural environments. To this end, a GC instrument was equipped with a flame ionization detector (FID) for the determination of CH4 and an ECD for CO2 and N2O, connected in series by a system of valves. In this way, it was possible to accurately measure the main GHG present in the atmosphere and in gaseous samples, simplifying the required laboratory equipment and reducing the associated labor and costs., This research was funded by the Spanish Ministry of Science, Innovation and Universities (PID2023–147405OR-I00). The support of the CERCA Program and the Consolidated Research Group of Sustainability in Biosystems (ref. 2021 SGR 01568), both from the Generalitat de Catalunya, is also acknowledged., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Sustainable biogas upgrading using renewable ammonia from pig slurry: integration of microbial electrolysis cells and hydrophobic membrane technology

  • Moreno Simon, Miguel
  • Riau, Victor
  • Noguerol-Arias, Joan
  • Cerrillo, Míriam
  • Bonmati, August
Biogas upgrading is required to increase methane concentration and meet grid-injection standards. Conventional absorbents such as monoethanolamine (MEA) and synthetic ammonium hydroxide (NH4OH) provide high CO2 removal but involve high costs, energy-intensive regeneration, and non-renewable resources. This study proposes an integrated approach coupling ammonium recovery from pig slurry in microbial electrolysis cells (MEC) with its reuse as a CO2 absorbent in hollow fiber membrane contactors (HFMC). The recovered ammonium was evaluated against water, MEA, and synthetic NH4OH under different gas-to-liquid ratios and absorbent concentrations. Water achieved limited CH4 enrichment (∼80%), whereas MEA and synthetic NH4OH provided >90% CO2 removal. MEC-derived ammonium achieved >95% CH4 and <2% CO2 with real biogas, demonstrating its potential as a renewable absorbent. This dual valorisation approach enhances the economic and environmental sustainability of biogas upgrading, positioning MEC-derived ammonium as a viable alternative to conventional absorbents., This research was funded by the Spanish Ministry of Science, Innovation and Universities (projects PID2023-147405OR-I00 and PID2020-118830RR-I00) and the European Commission (Grant Agreement n° 101112708). The support of the CERCA Program and of the Consolidated Research Group of Sustainability in Biosystems, (ref. 2021 SGR 01568), both from the Generalitat de Catalunya, is also acknowledged., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainable biogas upgrading using renewable ammonia from pig slurry: integration of microbial electrolysis cells and hydrophobic membrane technology

  • Moreno Simon, Miguel
  • Riau, Victor
  • Noguerol-Arias, Joan
  • Cerrillo, Míriam
  • Bonmati, August
Biogas upgrading is required to increase methane concentration and meet grid-injection standards. Conventional absorbents such as monoethanolamine (MEA) and synthetic ammonium hydroxide (NH4OH) provide high CO2 removal but involve high costs, energy-intensive regeneration, and non-renewable resources. This study proposes an integrated approach coupling ammonium recovery from pig slurry in microbial electrolysis cells (MEC) with its reuse as a CO2 absorbent in hollow fiber membrane contactors (HFMC). The recovered ammonium was evaluated against water, MEA, and synthetic NH4OH under different gas-to-liquid ratios and absorbent concentrations. Water achieved limited CH4 enrichment (∼80%), whereas MEA and synthetic NH4OH provided >90% CO2 removal. MEC-derived ammonium achieved >95% CH4 and <2% CO2 with real biogas, demonstrating its potential as a renewable absorbent. This dual valorisation approach enhances the economic and environmental sustainability of biogas upgrading, positioning MEC-derived ammonium as a viable alternative to conventional absorbents., This research was funded by the Spanish Ministry of Science, Innovation and Universities (projects PID2023-147405OR-I00 and PID2020-118830RR-I00) and the European Commission (Grant Agreement n° 101112708). The support of the CERCA Program and of the Consolidated Research Group of Sustainability in Biosystems, (ref. 2021 SGR 01568), both from the Generalitat de Catalunya, is also acknowledged., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of Carbon Dioxide by Gas Chromatography Using an Electron Capture Detector for the Analysis of Greenhouse Gases: A Comparison and Validation with the Standard Method

  • Noguerol-Arias, Joan
  • Bonmati, August
  • Prenafeta-Boldú, Francesc Xavier
  • Cerrillo, Míriam
This study reports the development of a novel analytical method for the determination of carbon dioxide (CO2) along with the other main greenhouse gases (GHG)‒methane (CH4) and nitrous oxide (N2O)‒ from environmental samples by gas chromatography (GC) using an electron capture detector (ECD). This new method was compared and validated with the standard GC method for the determination of CO2 using a thermal conductivity detector (TCD). The main performance parameters considered for the validation of an analytical method were evaluated: selectivity/specificity, linearity/working range, precision, trueness, limit of detection (LOD) and limit of quantitation (LOQ). This comparison was carried out using gas standards, reference materials and environmental samples containing GHG. Both the ECD- and TCD-based chromatographic analytical methods displayed a similar precision (3.1–3.4 %) and accuracy (101–106 %) for CO2 analysis. Although the LOQ for the ECD detector is higher than that of the TCD detector (300 vs. 99 µmol mol⁻¹), it is still sufficient for the analysis of most GHG samples. Once validated, the new analytical method was used for the simultaneous determination of CO2, CH4 and N2O in gaseous samples obtained from a wide range of conditions and agricultural environments. To this end, a GC instrument was equipped with a flame ionization detector (FID) for the determination of CH4 and an ECD for CO2 and N2O, connected in series by a system of valves. In this way, it was possible to accurately measure the main GHG present in the atmosphere and in gaseous samples, simplifying the required laboratory equipment and reducing the associated labor and costs., This research was funded by the Spanish Ministry of Science, Innovation and Universities (PID2023–147405OR-I00). The support of the CERCA Program and the Consolidated Research Group of Sustainability in Biosystems (ref. 2021 SGR 01568), both from the Generalitat de Catalunya, is also acknowledged., info:eu-repo/semantics/publishedVersion