Pasar al contenido principal

NUEVAS METODOLOGIAS DE MODELADO Y DISEÑO DE MULTIPLICADORES DE FRECUENCIA Y OSCILADORES PARA SISTEMA MULTIESTRATEGICO DE GEOLOCALIZACION, SENSADO E INTERCAMBIO DE INFOMACION

PID2023-147653OB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Hybrid Balanced Power Amplifier at 5.8 GHz Using GaN HEMTS and Sierpinski Space-Filling Couplers Design Approach

  • Alvarez-Ramos, Iago
  • Morales Fernandez, Ainhoa
  • Marante Boado, Maria
  • Fernández Barciela, Mónica
  • Martín Rodríguez, Fernando
A hybrid balanced power amplifier operating in C-band at 5.8 GHz has been designed for UAV communications using packaged GaN HEMTs and microstrip technology. To reduce the overall circuit footprint, Sierpinski space-filling curves are employed in the design of the hybrid quadrature couplers, allowing almost 40% miniaturization without degrading performance. The manufactured balanced amplifier prototype exhibits, at the carrier frequency and at 3 dB gain compression, a measured output RF power of 38.9 dBm (≈8 W) and a drain efficiency of 53%., Agencia Estatal de Investigación | Ref. PID2020-116569RBC33, Agencia Estatal de Investigación | Ref. PID2023-147653OB-C33
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Hybrid balanced frequency doubler up-converting from 2.45 to 4.9 GHz using packaged GaN HEMTs and a Moore space-filling coupler design approach

  • Morales Fernandez, Ainhoa
  • Fernández Barciela, Mónica
  • Martín Rodríguez, Fernando
  • Tasker, Paul
A hybrid Balanced Frequency Doubler working up-converting from 2.45 to 4.9 GHz using packaged GaN HEMTs and with no amplification stage, was designed and its performance validated with measurements. The design procedure is detailed, including a brief study of the HEMT optimum bias point. Moore space filling curves are used in the design of the input hybrid coupler, to reduce its size at the fundamental frequency. A maximum measured conversion gain of 11.5 dB with a second harmonic output power of 26.3 dBm was obtained, while fundamental and third harmonic suppression exceeds 40 dBc., Agencia Estatal de Investigación | Ref. PID2020-116569RB-C33, Agencia Estatal de Investigación | Ref. PID2023-147653OB-C33
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

GaN HEMT-based frequency quadrupler up-converting from s band to x band with conversion gain in narrowband

  • Morales Fernandez, Ainhoa
  • Marante Boado, Maria
  • Fernández Barciela, Mónica
  • Martín Rodríguez, Fernando
This work presents the first design of an active frequency quadrupler based on GaN HEMTs. It is based on two cascaded frequency doubler stages that allow up-conversion from the S band to the X band, obtaining conversion gain in narrowband without the need for any additional buffer amplifier. A hybrid prototype of the quadrupler provides, at the input fundamental frequency of 2.5 GHz, a measuredfourthharmonic maximum conversion gain of 13.7 dB and an output power of 23.5 dBm, with suppression of both fundamental andsecondharmonic above 14 dBc. To obtain these results, due to its impact in the final quadrupler behavior, a prototype of the higher frequency second stage doubler was designed and manufactured separately to assess its RF performance. The experimental results of this standalone prototype are highly competitive with the current state of the art in frequency doublers at the C band., Agencia Estatal de Investigación | Ref. PID2020-116569RB-C33, Agencia Estatal de Investigación | Ref. PID2023-147653OB-C33
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

Diseño de un amplificador híbrido equilibrado usando acopladores basados en “space-filling curves”

  • Guillerme, Rodríguez Varela
  • Morales Fernandez, Ainhoa
  • Fernández Barciela, Mónica
  • Martín Rodríguez, Fernando
This communication outlines the design of a hybrid Power Amplifier (PA), suitable for load modulation, optimized for applications at a frequency of 3.5 GHz, specifically targeting communications with Unmanned Aerial Vehicles (UAVs). The design utilizes a Gallium Nitride High Electron Mobility Transistor (GaN-HEMT), chosen for its superior power and efficiency, a crucial factor for onboard embedded applications. It relies on a Balanced Amplifier (BA) configuration, which combines two single PA’s, and “space-filling curves” based couplers to enhance power while minimizing signal reflections. The circuit can operate as a conventional BA or as a LoadModulated Balanced Amplifier (LMBA). The designed circuit was fabricated and measured. It was obtained at P2dB a measured output power of 34.5 dBm, a power gain of 15 dB, and a drain efficiency close to 40%., Agencia Estatal de Investigación | Ref. PID2020-116569RB-C33, Agencia Estatal de Investigación | Ref. PID2023-147653OB-C33