Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Energy, exergy and mass balances of a biomass pyrolysis pilot plant

  • Gracia-Monforte, César
  • Lete, Alejandro
  • Marias, Frédéric
  • Ábrego, Javier
  • Arauzo, Jesús
This work presents the methodology and results of the energy, exergy, and mass balances of a fixed-bed downdraft biomass pyrolysis pilot plant. The analysis covers different operating modes: pyrolysis without energy recovery, with energy recovery from products, and with combustion of non-condensable gases including exhaust-gas heat recovery. The proposed framework enables consistent comparison of energy and exergy performance under varying process configurations. Experimental results show that the external heat demand of the pyrolysis process strongly depends on the energy recovery strategy. When products are cooled to the reference state, the required heat input is approximately 1.3 MJ/kg, increasing to about 3 MJ/kg when products leave at the pyrolysis temperature. The combustion of process gases significantly reduces this demand, while integrating exhaust-gas heat recovery leads to quasi-autothermal operation. Exergy analysis reveals that gas combustion and heat recovery lower exergy efficiency due to the conversion of high-quality pyrogases into exhaust gases. Nevertheless, the methodology developed allows quantifying these trade-offs and provides a comprehensive tool to evaluate process integration strategies in biomass pyrolysis systems aimed at improved thermal performance and sustainability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical looping combustion of the aqueous phase fraction of bio-oil from biomass pyrolysis

  • Gracia-Monforte, César
  • Lete, Alejandro
  • Ábrego, Javier
  • Arauzo, Jesús
The aqueous fraction of pyrolysis bio-oil, which can account for up to 85 wt% water, is typically considered a low-value by-product due to its high water content, corrosivity, toxicity, and low heating value. Its effective utilization remains a challenge for the development of sustainable biomass valorization technologies. In this work, the potential of chemical looping combustion (CLC) was evaluated as an alternative route for converting this fraction into energy while enabling inherent CO2 capture. Several oxygen carriers (OCs) based on Cu, Fe, Ni, and Mn were screened in a fixed-bed reactor at 650 °C using a synthetic model mixture representative of the aqueous bio-oil fraction (acetone, acetic acid, phenol, p-cresol, and 2-butanone). The laboratory-synthesized CuO/Al2O3 powder OC exhibited the best performance, achieving complete oxidation of the mixture to CO2 and H2O without detectable by-products during the combustion phase. Furthermore, the selected OC demonstrated highly stable redox performance and regenerability over multiple cycles at 650 and 750 °C, with the operation at 750 °C effectively minimizing carbon deposition compared to 650 °C. Overall, this low-temperature CLC approach with a CuO/Al2O3 carrier successfully addresses prior challenges of severe carbon deposition and oxygen carrier deactivation, providing a robust pathway for aqueous bio-oil valorization.