Pasar al contenido principal

INNOVACION EN LA IMPRESION 3D DE ALIMENTOS CON PROCESAMIENTO SIMULTANEO POR MICROONDAS

PID2023-149275OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of geometric fidelity in protein-based 3D printing via coupled pressure-flow dynamics

  • Barrios-Rodríguez, Yeison Fernando|||0000-0001-6244-8773
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] In extrusion-based food 3D printing, geometric fidelity depends not only on the material's rheological properties but also on the stability of pressure-flow dynamics during deposition. This study aimed to interpret the 3D printing process of a rice protein ink through coupled pressure-flow dynamics analysis and to evaluate the ability of partial least squares (PLS) and machine learning (ML) models to predict geometric fidelity. A 3(2) factorial design was implemented, with real-time extrusion pressure monitoring, flow, oscillatory, and apparent rheological characterization, and image analysis. Mass flow rate ranged from 9.23 to 66.64 mg/s, and maximum pressures ranged from 227 to 237 kPa at 50 mm/s, with AUC reductions of up to 71.4% when increasing nozzle diameter (0.85 to 1.55) at 20 mm/s. The results revealed that printability is governed by two independent mechanisms: lateral redistribution and vertical stability. Lateral expansions reached +19.37% in frontal area and + 17.52% in top area, while maximum height reduction was -12.85%. The combination of 1.55 mm nozzle at 50 mm/s achieved the highest global fidelity (PFI >97%). PLS models showed limited predictive capacity (R-2 = 0.21-0.33), whereas the Random Forest algorithm substantially outperformed them (R-2 = 0.82-0.91), identifying printing speed, mass flow rate, apparent viscosity, and pressure variability as dominant predictors. These findings confirm that geometric fidelity depends on the dynamic balance between volumetric supply and pressure stability, validating ML as a tool to resolve the multivariable complexity of food 3D printing., This work was supported by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIAICO/2023/173, MCIN/AEI through project PID2023-149275OB-I00, and the FPI Ph.D. contract granted by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIGRIS/2021/105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Leavening Agent on the Stability of Bioactive Compounds and Antioxidant Capacity of Gluten-Free Bread with Beetroot By-Product

  • Molina-Montero, María del Carmen|||0000-0002-0797-8111
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] Beetroot by-product (BBP), an industrial residue rich in bioactive compounds, offers a sustainable solution to reduce food waste while enhancing the nutritional profile. The aim of the study was to evaluate the effect of different leavening agents (baking powder and baker's yeast) and geometry (rectangular and oval) on bioactive compound stability and antioxidant capacity when incorporating beetroot by-products into gluten-free bread formulations. Rectangular and oval-shaped gluten-free breads were produced using 3D printing. Moisture content, pH, color parameters, bioactive compounds (betalains and phenolic compounds), and antioxidant activity were analyzed in both crust and crumb. BBP addition significantly increased total phenolic content, antioxidant capacity, and betalain content in all formulations. Breads with baker's yeast exhibited higher bioactive retention due to acidic pH levels that favor phenolic and betanin stability. Bread with baking powder showed a higher retention of betaxanthins (yellow pigments), while those with baker's yeast retained betacyanins (red-violet pigments). Oval geometry improved moisture retention and bioactive preservation due to reduced surface exposure. This research demonstrates the feasibility of developing nutritionally enhanced gluten-free products using additive manufacturing. Bread enriched with beetroot by-product and baker's yeast represents a suitable option to improve functionality and pigment retention while valorizing industrial waste., This research was funded by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number AICO/2023/173, AGROALNEXT/ 2022/001, and from MCIN/AEI through project PID2023-149275OB-I00 and the FPI PhD contract granted by the Universitat Politecnica de Valencia subprograma 1 (PAID 01 21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of 3D printing for beetroot by-product valorization in gluten-free bread: Effects of leavening agent and geometry on printability

  • Molina-Montero, María del Carmen|||0000-0002-0797-8111
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] Food waste valorization through 3D printing technology represents an innovative approach to sustainable food production. Beetroot by-product (BBP), a fiber-rich source with bioactive compounds, represents a valuable ingredient to enrich gluten-free bread, which often lacks adequate fiber content. This study investigates the feasibility of using 3D printing in the formulation of gluten-free bread enriched with BBP, examining the effects of leavening agent type (baking powder vs. baker's yeast) and geometry (rectangular vs. oval) on printability, dimensional stability, and final product quality. Four formulations were developed with and without 4 % BBP addition. Rheological analysis revealed that BBP incorporation significantly increased storage modulus (from 2060 Pa to 5220 Pa) and complex viscosity (from 313 Pa & sdot;s to 863 Pa & sdot;s), with baking powder formulations showing higher values than baker's yeast formulations. Extrusion tests confirmed increased flow resistance with BBP addition. Baker's yeast formulations with BBP exhibited superior dimensional stability, particularly in oval geometries. It was observed that baking powder systems developed large, sparse pores, while baker's yeast systems generated small, high-density pores. BBP addition enhanced moisture retention in fermented systems and improved textural properties regardless of leavening agent. This research demonstrates the feasibility of valorizing agricultural by-products through 3D food printing to develop customized gluten-free bakery products, representing a viable strategy for nutritional enhancement while simultaneously addressing food waste challenges in the agro-industry., This research was funded by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number AICO/2023/173, AGROALNEXT/2022/001, and from MCIN/AEI through project PID2023-149275OB-I00 and the FPI PhD contract granted by the Universitat Politecnica de Valencia subprograma 1 (PAID0121) .