Pasar al contenido principal

DISEÑO FOTONICO DE DISPOSITIVOS OPTOELECTRONICOS BASADOS EN SOLIDOS DE PUNTOS CUANTICOS DE PEROVSKITA

PID2023-149344OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable White Light Emission from Transparent Nanophosphor Films Embedding Perovskite Lead Halide Nanostructures

  • Viaña, José María
  • Romero-Pérez, Carlos
  • Calvo, Mauricio E.
  • Lozano, Gabriel
  • Míguez, Hernán
Exploring synergistic interactions between nanomaterials that can enhance their collective properties in ways that individual components cannot achieve represents an avenue for advancing beyond the current state of the art. This approach is particularly relevant in the context of ABX3 nanocrystals, where pursuing cooperation could help to overcome current challenges associated with light generation. Transparent photoluminescent coatings are developed by combining perovskite nanomaterials and porous scaffolds of high optical quality phosphor nanoparticles. Fine tuning of the spectral content of the emission is achieved with the photoexcitation wavelength, allowing the demonstration of white light emission with tunable hues., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (NANOPHOM, grant agreement no. 715832). Financial support was also received from the Spanish Ministry of Science and Innovation under grants PID2020-116593RB-I00 funded by MCIN/AEI/10.13039/501100011033, and PID2023-149344OB-I00 funded by MCIU/AEI/10.13039/501100011033 and FEDER, EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Room-temperature cavity exciton-polariton condensation in perovskite quantum dots

  • Georgakilas, Ioannis
  • Tiede, David
  • Urbonas, Darius
  • Mirek, Rafał
  • Bujalance, Clara
  • Calió, Laura
  • Oddi, Virginia
  • Tao, Rui
  • Dirin, Dmitry N
  • Rainò, Gabriele
  • Boehme, Simon C
  • Galisteo-López, Juan F.
  • Mahrt, Rainer F
  • Kovalenko, Maksym V
  • Míguez, Hernán
  • Stöferle, Thilo
Chemicals and CAS Registry Numbers bromide 24959-67-9 cesium 7440-46-2 lead 7439-92-1, 13966-28-4 perovskite 12194-71-7, 61027-03-0 polystyrene 9003-53-6, The exploitation of the strong light-matter coupling regime and exciton-polariton condensates has emerged as a compelling approach to introduce strong interactions and nonlinearities into numerous photonic applications. The use of colloidal semiconductor quantum dots with strong three-dimensional confinement as the active material in optical microcavities would be highly advantageous due to their versatile structural and compositional tunability and wet-chemical processability, as well as potentially enhanced, confinement-induced polaritonic interactions. Yet, to date, exciton-polariton condensation in a microcavity has neither been achieved with epitaxial nor with colloidal quantum dots. Here, we demonstrate room-temperature polariton condensation in a thin film of monodisperse, colloidal CsPbBr3 quantum dots, placed in a tunable optical resonator with a Gaussian-shaped deformation serving as wavelength-scale potential well for polaritons. The onset of polariton condensation under pulsed optical excitation is manifested in emission by its characteristic superlinear intensity dependence, reduced linewidth, blueshift, and extended temporal coherence., We thank the team of the IBM Binnig and Rohrer Nanotechnology Center for support with the cavity fabrication. We acknowledge funding from EU H2020 EIC Pathfinder Open project “PoLLoC” (Grant Agreement No. 899141), EU H2020 EIC Pathfinder Open project “TOPOLIGHT” (Grant Agreement No. 964770), EU H2020 MSCA-ITN project “AppQInfo” (Grant Agreement No. 956071), EU H2020 MSCA-ITN project “PERSEPHONe” (Grant No. 956270), Swiss National Science Foundation project “Q-Light – Engineered Quantum Light Sources with Nanocrystal Assemblies” (Grant No. 200021_192308). the Spanish Ministry of Science and Innovation (Grant PID2020-116593RB-I00 and Grant PID2023-149344OB-100, funded by MCIN/AEI/10.13039/501100011033), and Junta de Andalucía (Grant P18-RT-2291 (FEDER/UE))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient Energy Transfer Between Ligand-Free FAPbBr3 Nanocrystals in a Mesoporous SiO2 Matrix

  • Guilloux, Victor
  • Barisien, Thierry
  • Legrand, Laurent
  • Romero Pérez, Carlos
  • Galisteo-López, Juan F.
  • Calvo, Mauricio E.
  • Míguez, Hernán
  • Chamarro, Maria
This article also appears in: Hot Topic: Mesoporous Materials, Lead halide perovskite nanocrystals (NCs) are promising materials for next-generation optoelectronic devices due to their exceptional optical properties. However, poor long-term stability remains a major challenge. In this study, formamidium lead bromide (FAPbBr<inf>3</inf>) NCs are embedded in a mesoporous silica matrix to enhance stability and explore exciton transport mechanisms. These NCs display a narrow photoluminescence (PL) linewidth of 25 meV at 7 K. The absence of surface ligands leads to reduced interparticle spacing, favoring non-radiative Förster resonance energy transfer (FRET) as the dominant exciton transport mechanism. Using time-resolved and spectrally-resolved PL spectroscopy at cryogenic temperatures, it is observed significant spectral redistribution over time, indicating energy transfer from higher-energy to lower-energy NCs. To quantitatively interpret these dynamics, a theoretical model based on a 2D array of coupled NCs, incorporating Förster's theory to simulate exciton diffusion is employed. This model successfully reproduces the experimentally observed PL decay behavior, confirming FRET-mediated exciton transport with an upper-limit efficiency close to 100% and a transfer rate of 105 ns<sup>−1</sup>. These findings offer key insights into energy transfer processes in ligand-free perovskite NC systems and underscore the potential of mesoporous silica matrices for improving stability and enabling control over excitonic interactions in perovskite-based optoelectronic applications., Spanish Ministry of Science and Innovation. Grant Number: PID2023-149344OB-100, funded by MCIN/AEI/10.13039/5011000110, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand-Engineered Methylammonium Lead Bromide Nanoplatelets: Single-Photon Emission and Strong Light-Matter Coupling

  • Sekh, Taras V.
  • Kim, Taehee
  • Sabisch, Sebastian
  • Bertolotti, Federica
  • Calió, Laura
  • Galisteo-López, Juan F.
  • Coto-Ruiz, Francisco J.
  • Santiago-Andrades, Lucía
  • Guagliardi, Antonietta
  • Masciocchi, Norberto
  • Erni, Rolf
  • Míguez, Hernán
  • Rainò, Gabriele
  • Bodnarchuk, Maryna I.
  • Kovalenko, Maksym V.
Lead halide perovskite nanoplatelets (LHP NPLs) are of immense interest in the materials science and optoelectronics communities owing to their strong quantum confinement leading to narrow emission peaks, thickness-dependent tunable photoluminescence, and large exciton binding energies. Thus far, their further development and photophysical investigations at ensemble and single-particle levels have been impeded by suboptimal ligand passivation, inferior environmental and colloidal stability compared to their 3D nanocrystal counterparts, and limited compositional diversity. Here, we report highly monodisperse methylammonium lead bromide (MAPbBr3) NPLs (11.3 ± 2.3 × 1.7 ± 0.5 nm) with tunable ligand chemistry and enhanced photoluminescence quantum yields of up to 80%. NPLs capped with zwitterionic ligands exhibit improved stability upon air exposure and sequential purification. Nuclear magnetic resonance spectroscopy on ligand-exchanged NPLs, capped with either phosphocholine- or phosphoethanolamine-type ligands, confirms the partial replacement of the pristine ligands. Owing to the size and shape uniformity of synthesized MAPbBr3 NPLs, they readily form assemblies of stacked face-to-face NPLs, as observed in both colloidal dispersions and films, giving rise to concentration-dependent multicolor emission. The temperature dependence of the NPL emission exhibits a nonmonotonous trend, attributed to the highly anisotropic confinement and the consequent exciton–phonon coupling. We also observed photoluminescence from single MAPbBr3 NPLs at both room and cryogenic temperatures, revealing highly polarized fine-structure emission lines with single-photon purity exceeding 80%. The high uniformity and optical transparency of MAPbBr3 NPL films enabled their integration into optical cavities, where they exhibited strong light-matter coupling with a substantial Rabi splitting of 200 meV., This work was supported by the Office of Naval Research under Grant No. N629092512073. M.I.B. and G.R. acknowledge financial support from the Swiss National Science Foundation “Cavity-Enhanced Many-Body Interactions in Deterministically Positioned Perovskite Quantum Dots (CHIP-QD)” (Grant No. 200021-231778). We thank the Swiss Federal Laboratory for Materials Science and Technology (Empa, Switzerland) for the financial support of this work. M.V.K. is grateful to the Air Force Office of Scientific Research and the Office of Naval Research (award numbers FA8655-21-1-7013 and FA8655-24-1-7064). T.K. acknowledges support from the ETH Postdoctoral Fellowship (23-2 FEL-021). H.M. is grateful to the Spanish Ministry of Science and Innovation for funding under Grant PID2023–149344OB-I00, funded by MCIN/AEI/10.13039/501100011033. L.S. acknowledges project MMT_ICMS01, funded by the Momentum Programme (European Union NextGenerationEU/PRTR). F.J.C. acknowledges CSIC for funding under Programme JAE-PRE. A.G. acknowledges partial funding from project PE0000021, “Network 4 Energy Sustainable Transition-NEST”, Spoke 1, funded by European Union-NextGenerationEU under NRRP, Mission 4, Component 2, Investment 1.3-Call for tender No. 1561 of Ministero dell’Università e della Ricerca (MUR). The authors are grateful for using the facilities at the Empa Electron Microscopy Center. Mariia Svyrydenko is acknowledged for providing cubic MAPbBr3 NCs. Artem Yanchak is acknowledged for help with powder X-ray diffraction measurements. We thank Dmitry Dirin and Simon C. Boehme for their assistance with in situ absorption measurements. Sergey Tsarev is acknowledged for help with AFM imaging. We thank Jonathan Avaro for initial SAXS measurements. Luisa Barba is acknowledged for assistance during Synchrotron X-ray data collection., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoporous Scaffold-Assisted Ligand-Free CsPbBr3 Quantum Dots for Bright and Ultrapure Green Light-Emitting Diodes

  • Romero-Pérez, Carlos
  • Yuan, Zhongcheng
  • Calvo, Mauricio E.
  • Snaith, Henry J.
  • Míguez, Hernán
The development of stable and spectrally pure green emitters remains a critical challenge for high performance full color displays and solid-state lighting. In this work, we present a simple and effective approach to fabricate perovskite light-emitting diodes based on CsPbBr quantum dots confined within a nanoporous silica scaffold. The introduction of linear (n) or branched (t) butylammonium bromide and crown ethers into the precursor solution prior to infiltration induces improved charge injection and transport across the active layer. This dual-additive approach contributes to a dramatic enhancement in device performance, leading to a highest luminance exceeding 10,000 cd m, and markedly improved operational stability. The optimized devices exhibit ultrapure green emission centered at 520 nm with a narrow spectral width below 20 nm. The proposed method provides a versatile and scalable route toward bright, spectrally pure, and durable perovskite light-emitting devices., MCIN/AEI/10.13039/501100011033 and FEDER/UE. Grant Number: PID2023-149344OB-100 Junta de Andalucía. Grant Number: DGP_PIDI_2024_00821 UKRI Horizon Europe Guarantee funding for Marie Skłodowska-Curie Actions (MSCA) Postdoctoral Fellowships. Grant Number: EP/Y029135/1 Engineering and Physical Sciences Research Council. Grant Number: EP/V061747/1, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Comparative Analysis of the Defect Landscape of Solution-Processed and Evaporated Lead Halide Perovskite Films

  • Tiede, David O.
  • Santiago-Andrades, Lucía
  • Ngo, T. Tuyen
  • Calió, Laura
  • Zanoni, Kassio P. S.
  • Galisteo-López, Juan F.
  • Bolink, H.J.
  • Míguez, Hernán
Herein, we analyze the defect structure of evaporated and solution-processed methyl ammonium lead iodide perovskite films using exclusively non-invasive photophysical analysis. By using a representation of time-resolved photoluminescence data in the form of an instantaneous decay rate vs a variable that depends on the density of carriers, we are able to identify patterns that can be univocally assigned to the presence of either shallow or deep traps. Furthermore, it allows quantifying the relative contribution of each defect type to carrier recombination. We find that as-synthesized solution-processed films present balanced concentrations of shallow and deep traps, while the latter are prevalent in evaporated ones. This defect landscape changes radically when films are exposed to the ambient atmosphere. The validity of this approach is demonstrated by employing the extracted values of the relevant photophysical parameters to accurately reproduce the experimentally observed dependence of the photoluminescence emission efficiency on the excitation intensity., Financial support from projects TED2021-129679B-C21 and C22, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, PID2023-149344OB-100, funded by MCIN/AEI/10.13039/501100011033 and FEDER/UE, PID2024-159087OB-I00 funded by MICIU/AEI/10.13039/501100011033” and “ERDF A way of making Europe” and grant DGP_PIDI_2024_00821, funded by Junta de Andalucía, is acknowledged. D.O.T acknowledges financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956270 (PERSEPHONE). L.S. acknowledges project MMT_ICMS01, funded by the Momentum Programme (European Union NextGenerationEU/PRTR)., Peer reviewed