Pasar al contenido principal

RECUPERACION Y REUTILIZACION DE LOS GASES FLUORADOS UTILIZANDO NUEVOS ENFOQUES DE ECONOMIA CIRCULAR

PID2023-149713OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT RAMON LLULL, FUNDACIO PRIVADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Advancing electrified CO2 capture: Material design strategies for magnetic adsorption composites

  • Stratil, Oliver
  • Cespedes, Oscar
  • Croquet, Olivier
  • Visart de Bocarmé, Thierry
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This study investigates the design and performance of magnetic adsorption composites (MACs) for application in electrified CO2 capture with temperature swing adsorption from point sources. The MACs were composed of Fe3O4 as magnetic component to act as inductive heating source and zeolite 13× as a CO2 adsorbent. Three MAC configurations were prepared and evaluated under temperature feedback-loop control at different desorption temperatures ranging between 100−150°C: Homogeneous mixture of Fe3O4 and zeolite 13×, a core-shell structure with magnetic Fe3O4 core and zeolite 13× shell, and a mixed bed configuration containing separate heating and adsorbent beads. Resistive wall heated and room-temperature desorption experiments were conducted as references. In average, the heating experiments reached a steady-state effective working capacity after around 20 adsorption-desorption cycles. The homogenous mixture exhibited the most favorable performance, combining fast heating response, stable temperature control, and high CO2 desorption efficiency. When reaching steady state, it achieved 99% desorption within 94s and the highest productivity of 0.52 mgCO2 / gMAC*S with a theoretical regeneration energy of 3.0 MJ/kgCO2 [Formula presented]. The core-shell structure showed limited temperature control due to low heat transfer through the shell, while the mixed bed configuration achieved moderate performance. Compared with column wall heating, inductive heating improved thermal efficiency by delivering heat directly to the adsorbent region. However, efficient coupling of the magnetic field to the magnetic material remains the key challenge for energy efficient induction heated TSA., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Combining molecular modelling approaches for a holistic thermophysical characterisation of fluorinated refrigerant blends

  • Jovell, Daniel
  • Alonso, Gerard
  • Gamallo, Pablo
  • González Olmos, Rafael
  • Quinteros-Lama, Héctor
  • Llovell, Felix
After Montreal Protocol, hydrofluorocarbons (HFCs) appeared to be a permanent solution for replacing previous ozone-depleting substances. However, their utilisation has now progressively decreased following the Kigali Amendment application in 2016 due to their high global warming potential (GWP). Unsaturated HFCs, such as hydrofluoroolefins (HFOs), are considered feasible alternatives due to their high reaction rates and low atmospheric lifetimes, resulting in very low GWP. However, available data on their physicochemical behaviour still needs to be improved, even with the recent increase in the amount of new experimental data for these systems. In this direction, computational tools provide a quick pathway to screen their properties and complete the information obtained from experimental work. In this contribution, two different molecular modelling tools, molecular dynamics (MD) simulations and the soft-SAFT equation of state (EOS), are combined to compute the coexistence densities, vapour pressure, heat capacity, interfacial tension, and dynamic viscosity of several refrigerant blends based on 3rd and 4th generation compounds, in order to provide a thermodynamic analysis of the properties of these mixtures, addressing them for drop-in replacement purposes. Results from MD are compared with REFPROP data and those from soft-SAFT, where the capacities of both modelling methods are addressed. In general, quantitative agreement is achieved using the two approaches, offering a framework to screen these properties for new mixtures., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Electrifying CO2 temperature swing adsorption: A comparative review of resistive, induction, and microwave heating from material properties to process performance

  • Stratil, Oliver
  • Gonzalez Olmos, Rafael
  • FERNANDEZ, JAVIER
Electrified temperature swing adsorption (eTSA) has emerged as a promising approach for intensified post-combustion CO2 capture by enabling direct heat generation within the adsorption bed and thereby reducing the thermal limitations associated with conventional externally heated TSA systems. This review systematically compares the three main electrified heating approaches currently investigated for post-combustion CO2 capture: Resistive heating (RH), Induction heating (IH), and Microwave heating (MWH). To improve comparability across the fragmented and predominantly laboratory-scale eTSA literature, publications of comparable boundary conditions were analyzed using homogeneous evaluation criteria including working capacity, CO2/N2 selectivity, heating rate, temperature homogeneity, regeneration energy and electrical and thermal energy efficiencies. Among the reviewed adsorbents, physisorbents dominated the current eTSA literature, particularly metal-organic frameworks (MOFs), zeolites, and activated carbons (ACs). Mg-MOF-74 and Mg-Gallate exhibited the highest working capacities, followed by the zeolites 13X and NaUSY, while AC offers direct applicability for RH and MWH because of its conductive and microwave-responsive properties. However, humidity sensitivity remains a major limitation for high adsorption capacity physisorbents. All reviewed electrified heating approaches achieved substantially higher heating rates than conventional conductive wall heating or hot gas purge systems. RH has a potentially very high overall energy efficiency, although homogeneous current distribution remains challenging. IH provides high flexibility in adsorbent selection through magnetic heating additives and offers strong potential for homogeneous internal heating, while efficient magnetic field coupling remains the key challenge for energy-efficient operation. MWH enables extremely rapid heating without necessarily requiring additional heating materials but faces challenges regarding temperature homogeneity and electric-to-thermal energy efficiency. Overall, all electrified approaches still face important scale-up challenges regarding heat and field distribution, and electrical-to-thermal energy efficiency. This review highlights the strong potential of eTSA for flexible and intensified CO2 capture while identifying humidity-tolerant adsorbents, cyclic stability, heat-management optimization, and realistic process-scale evaluation as key priorities for future research and industrial implementation., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Absolute environmental sustainability assessment of emerging working fluids in organic rankine cycles

  • Shirmohammadi, Reza
  • González Olmos, Rafael
  • Calvo Serrano, Raul
  • Llovell, Felix
  • González Olmos, Rafael
New working fluids (WFs) have been recently proposed to enhance the environmental performance of Organic Rankine Cycles (ORCs) in waste heat recovery systems. However, a critical gap remains in the comprehensive evaluation of their environmental impacts, particularly those associated with the production of these compounds and their use in ORC systems. This study performs a comprehensive absolute environmental sustainability assessment (AESA) to evaluate the environmental trade-offs of replacing traditional WFs, such as R245fa, with emerging alternatives in ORC systems. An innovative methodology, integrating process simulation, life cycle assessment (LCA), prospective analysis, and the planetary boundaries (PBs) framework, is employed to provide a holistic sustainability assessment. The results show that using emerging WFs reduces 85% of the carbon footprint of ORCs. Although this transition shifts environmental burdens to the ozone depletion impact category, the system remains within the PBs’ safe operating space. The burden of the other environmental impact categories studied is reduced by more than 15%. The prospective analysis highlights that the transition from current to alternative WFs for ORC systems could cut around 237 million tons of annual CO2 emissions by 2050., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Combining molecular modelling approaches for a holistic thermophysical characterisation of fluorinated refrigerant blends

  • Jovell, Daniel
  • Alonso, Gerard
  • Gamallo, Pablo
  • González Olmos, Rafael
  • Quinteros-Lama, Héctor
  • Llovell, Felix
After Montreal Protocol, hydrofluorocarbons (HFCs) appeared to be a permanent solution for replacing previous ozone-depleting substances. However, their utilisation has now progressively decreased following the Kigali Amendment application in 2016 due to their high global warming potential (GWP). Unsaturated HFCs, such as hydrofluoroolefins (HFOs), are considered feasible alternatives due to their high reaction rates and low atmospheric lifetimes, resulting in very low GWP. However, available data on their physicochemical behaviour still needs to be improved, even with the recent increase in the amount of new experimental data for these systems. In this direction, computational tools provide a quick pathway to screen their properties and complete the information obtained from experimental work. In this contribution, two different molecular modelling tools, molecular dynamics (MD) simulations and the soft-SAFT equation of state (EOS), are combined to compute the coexistence densities, vapour pressure, heat capacity, interfacial tension, and dynamic viscosity of several refrigerant blends based on 3rd and 4th generation compounds, in order to provide a thermodynamic analysis of the properties of these mixtures, addressing them for drop-in replacement purposes. Results from MD are compared with REFPROP data and those from soft-SAFT, where the capacities of both modelling methods are addressed. In general, quantitative agreement is achieved using the two approaches, offering a framework to screen these properties for new mixtures., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advancing electrified CO2 capture: Material design strategies for magnetic adsorption composites

  • Stratil, Oliver
  • Cespedes, Oscar
  • Croquet, Olivier
  • Visart de Bocarmé, Thierry
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This study investigates the design and performance of magnetic adsorption composites (MACs) for application in electrified CO2 capture with temperature swing adsorption from point sources. The MACs were composed of Fe3O4 as magnetic component to act as inductive heating source and zeolite 13× as a CO2 adsorbent. Three MAC configurations were prepared and evaluated under temperature feedback-loop control at different desorption temperatures ranging between 100−150°C: Homogeneous mixture of Fe3O4 and zeolite 13×, a core-shell structure with magnetic Fe3O4 core and zeolite 13× shell, and a mixed bed configuration containing separate heating and adsorbent beads. Resistive wall heated and room-temperature desorption experiments were conducted as references. In average, the heating experiments reached a steady-state effective working capacity after around 20 adsorption-desorption cycles. The homogenous mixture exhibited the most favorable performance, combining fast heating response, stable temperature control, and high CO2 desorption efficiency. When reaching steady state, it achieved 99% desorption within 94s and the highest productivity of 0.52 mgCO2 / gMAC*S with a theoretical regeneration energy of 3.0 MJ/kgCO2 [Formula presented]. The core-shell structure showed limited temperature control due to low heat transfer through the shell, while the mixed bed configuration achieved moderate performance. Compared with column wall heating, inductive heating improved thermal efficiency by delivering heat directly to the adsorbent region. However, efficient coupling of the magnetic field to the magnetic material remains the key challenge for energy efficient induction heated TSA., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrifying CO2 temperature swing adsorption: A comparative review of resistive, induction, and microwave heating from material properties to process performance

  • Stratil, Oliver
  • Gonzalez Olmos, Rafael
  • FERNANDEZ, JAVIER
Electrified temperature swing adsorption (eTSA) has emerged as a promising approach for intensified post-combustion CO2 capture by enabling direct heat generation within the adsorption bed and thereby reducing the thermal limitations associated with conventional externally heated TSA systems. This review systematically compares the three main electrified heating approaches currently investigated for post-combustion CO2 capture: Resistive heating (RH), Induction heating (IH), and Microwave heating (MWH). To improve comparability across the fragmented and predominantly laboratory-scale eTSA literature, publications of comparable boundary conditions were analyzed using homogeneous evaluation criteria including working capacity, CO2/N2 selectivity, heating rate, temperature homogeneity, regeneration energy and electrical and thermal energy efficiencies. Among the reviewed adsorbents, physisorbents dominated the current eTSA literature, particularly metal-organic frameworks (MOFs), zeolites, and activated carbons (ACs). Mg-MOF-74 and Mg-Gallate exhibited the highest working capacities, followed by the zeolites 13X and NaUSY, while AC offers direct applicability for RH and MWH because of its conductive and microwave-responsive properties. However, humidity sensitivity remains a major limitation for high adsorption capacity physisorbents. All reviewed electrified heating approaches achieved substantially higher heating rates than conventional conductive wall heating or hot gas purge systems. RH has a potentially very high overall energy efficiency, although homogeneous current distribution remains challenging. IH provides high flexibility in adsorbent selection through magnetic heating additives and offers strong potential for homogeneous internal heating, while efficient magnetic field coupling remains the key challenge for energy-efficient operation. MWH enables extremely rapid heating without necessarily requiring additional heating materials but faces challenges regarding temperature homogeneity and electric-to-thermal energy efficiency. Overall, all electrified approaches still face important scale-up challenges regarding heat and field distribution, and electrical-to-thermal energy efficiency. This review highlights the strong potential of eTSA for flexible and intensified CO2 capture while identifying humidity-tolerant adsorbents, cyclic stability, heat-management optimization, and realistic process-scale evaluation as key priorities for future research and industrial implementation., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Absolute environmental sustainability assessment of emerging working fluids in organic rankine cycles

  • Shirmohammadi, Reza
  • González Olmos, Rafael
  • Calvo Serrano, Raul
  • Llovell, Felix
  • González Olmos, Rafael
New working fluids (WFs) have been recently proposed to enhance the environmental performance of Organic Rankine Cycles (ORCs) in waste heat recovery systems. However, a critical gap remains in the comprehensive evaluation of their environmental impacts, particularly those associated with the production of these compounds and their use in ORC systems. This study performs a comprehensive absolute environmental sustainability assessment (AESA) to evaluate the environmental trade-offs of replacing traditional WFs, such as R245fa, with emerging alternatives in ORC systems. An innovative methodology, integrating process simulation, life cycle assessment (LCA), prospective analysis, and the planetary boundaries (PBs) framework, is employed to provide a holistic sustainability assessment. The results show that using emerging WFs reduces 85% of the carbon footprint of ORCs. Although this transition shifts environmental burdens to the ozone depletion impact category, the system remains within the PBs’ safe operating space. The burden of the other environmental impact categories studied is reduced by more than 15%. The prospective analysis highlights that the transition from current to alternative WFs for ORC systems could cut around 237 million tons of annual CO2 emissions by 2050., info:eu-repo/semantics/acceptedVersion