Pasar al contenido principal

MEJORA DEL FUNCIONAMIENTO DE BATERIAS DE SODIO MEDIANTE EL CONOCIMIENTO AVANZADO DEL CATODO Y EL ELECTROLITO

PID2023-150574NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A new quasi-solid polymer electrolyte for next-generation Na–O2 batteries: unveiling the potential of a polyamide-polyether system

  • Yahia, Mohamed
  • Enterría, Marina
  • Pozo Gonzalo, Cristina
  • Ortiz-Vitoriano, N.
7 figures.-- Supplementary information available., A novel quasi-solid polymer electrolyte (QSPE) composed of polyamide (PA) and polyethylene oxide (PEO), commercially known as Pebax1657, and combined with 1 M sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) in diethylene glycol dimethyl ether (diglyme, DEGDME), has been investigated for sodium–oxygen (Na–O2) batteries. Pebax1657 QSPE exhibits high ionic conductivity (6.57 × 10−4 S cm−1 at room temprerature - RT), an oxidation onset potential of 4.69 V versus Na/Na⁺, and an enhanced Na⁺ transference number (tNa⁺ ≈ 0.40). Structural analysis (Raman spectroscopy, differential scanning calorimetry, X-ray diffraction, small-angle X-ray scattering) confirms reduced PEO crystallinity and formation of orderly nanodomains, facilitating Na⁺ transport. Long-term galvanostatic cycling in Na|Na symmetrical cells demonstrates stable overpotentials (≈80 mV) at 75 µA cm⁻2 for 210 h, outperforming conventional liquid electrolytes (≈110 h). Pebax1657 QSPE enables higher discharge capacities (2.60 mAh cm⁻2 at 75 µA cm⁻2; 2.11 mAh cm⁻2 at 150 µA cm⁻2) with lower overpotentials (≈0.2 V). It sustains 25 cycles at 75 µA cm⁻2 and 35 cycles at 150 µA cm⁻2 at 0.25 mAh cm⁻2, with a Coulombic Efficiency (CE) of 80–90%. Compared to the state of the art, Pebax1657 QSPE offers improved electrochemical stability, lower overpotentials, and better capacity retention. Its sustainability and versatility make it a strong candidate for Na–O2 batteries and other energy storage applications., M.Y. acknowledges the Marie Sklodowska-Curie Actions (MSCA-IF) grant “101067009” funded by the European Union's Horizon research and innovation programme. N.O.-V. acknowledges grant RYC2020–030104-I funded by MICIU/AEI/ 10.13039/501100011033 and by ESF Investing in your future. C.P.G. thanks the grant PID2023-150574NB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for A new quasi-solid polymer electrolyte for next-generation Na–O2 batteries: unveiling the potential of a polyamide-polyether system [Dataset]

  • Yahia, Mohamed
  • Enterría, Marina
  • Pozo Gonzalo, Cristina
  • Ortiz-Vitoriano, N.
Under a Creative Commons BY 4.0 license., Figures: Figure S1. The synthetic route for the Pebax®1657 membrane via solvent evaporation method. Figure S2. SEM micrographs corresponding of the Celgard separator (a) and Pebax®1657 membrane (b), air permeability assessed via Gurley measurements (c), N2 adsorption-desorption isotherm at -196 ºC (77K) (d). Figure S3 Electrolyte uptake of the Celgard separator and Pebax®1657 membrane as a function of time (a), Nyquist plots (b), and the correlation between electrolyte uptake and ionic conductivity for Celgard/L.E. and Pebax®1657 QSPE (c). Both polymers were immersed in 1M NaTFSI/diglyme electrolyte. Figure S4. NMR spectra of the 1M NaTFSI/diglyme electrolyte after immersion of the Pebax®1657 membrane for 48 hours, compared to NaTFSI/diglyme control and using deuterated dimethyl sulfoxide (DMSO-d6) as the reference solvent: (a) 1H-NMR; (b) 23Na-NMR; (c) 19F-NMR. Figure S5. Raman spectra of NaTFSI/diglyme electrolyte, Pebax®1657 membrane, and Pebax Pebax®1657 QSPE, and Pebax®1657 QSPE after cycling showing different regions of the spectrum. The Pebax®1657 membrane was immersed in 1M NaTFSI/diglyme and dried before analysis. Figure S6. The proposed mechanism for Na+ ion transport via Pebax®1657 QSPE Figure S7. ATR-FTIR spectra (a) and XRD patterns (b) of Celgard separator, NaTFSI/diglyme, and Celgard/L.E. Figure S8. The correct XRD patterns and the Full Width at Half Maximum (FWHM) via the Pseudo-Voigt function for Pebax®1657 membrane and Pebax®1657 QSPE impregnated with NaTFSI/diglyme. Figure S9. SEM cross-section of Pebax®1657 QSPE (a) and EDS-SEM mapping for the Pebax®1657 QSPE showing the distribution of Na, F, and S elements within the membrane matrix (b and c). Transference number calculations Figure S10. LSV profiles using unsymmetrical coin cells (Na| Celgard/L.E.|SS; Na| The Pebax®1657 QSPE |SS) with scan rate 1 mV/s, (a), Nyquist plots before and after polarization, (b), and chronoamperometry curves (CA) for Celgard/L.E. and Pebax®1657 QSPE with PEIS measurements (c). Figure S11. Voltage profiles of Na|Na symmetrical cells using Celgard/L.E (a and c) Pebax®1657 QSPE (b and f) for different stags long-term galvanostatic cycling at current density (75 µA cm-2), respectively. Figure S12. Raman spectra of the air cathodes discharged at a-b)75 µA cm-2 and c-d) 150 µA cm-2, for the Swagelok-type Na-O2 batteries using a-c) Celgard/L.E. and b-d) Pebax®1657 QSPE. Figure 13. SEM imaging of the cathode/electrolyte interface after discharge at different current densities; a-b)75 µA cm-2 and c-d) 150 µA cm-2, for the batteries assembled using a) Celgard/L.E. and Pebax®1657 QPE systems. Figure S14. Galvanostatic discharge/charge (shallow cyclability) curves at current densities (75 µA cm-2 and 150 µA cm-2) for the Swagelok-type Na-O2 batteries assembled cells using Celgard/L.E. (a and c) and Pebax®1657 QSPE (b and d) to a limited capacity (0.25 mAh cm-2) and Cut-off potential (1.8 V). The charge overpotential evolution during cycling for both Celgard/L.E. and Pebax®1657 QSPE at the two current densities (75 μA cm-2 and 150 μA cm-2) (e). Both polymers were immersed in 1 M NaTFSI/diglyme inside the glovebox. Figure S15. SEM imaging and digital photos of the pristine Na anode (a, d) and Na anode for the discharged Swagelok-type Na-O2 batteries assembled cells at current density (75 µA cm-2) using Pebax®1657 QSPE (b, e) and Celgard/L.E. (c, f). Tables: Table S1. The assigned chemical-shifts for the liquid electrolyte (NaTFSI/diglyme) as observed in the NMR spectra. Table S2. The assigned FTIR bands of the Pebax®1657 QSPE, Pebax®1657 membrane, NaTFSI/diglyme electrolyte, Celgard membrane, and Celgard/L.E, respectively. Table S3. The assigned Raman bands of the NaTFSI/diglyme electrolyte, Pebax®1657 membrane, Pebax®1657 QSPE, and Pebax®1657 QSPE, respectively. Table S4. Comparison of the electrochemical performance of this work with reported polymer electrolytes for Na-O2 batteries in the literature. Table S5. Comparison of the electrochemical performance of this work with reported polymer electrolytes for Na ion batteries in the literature. References., M.Y. acknowledges the Marie Sklodowska-Curie Actions (MSCA-IF) grant “101067009” funded by the European Union's Horizon research and innovation programme. N.O.-V. acknowledges grant RYC2020–030104-I funded by MICIU/AEI/ 10.13039/501100011033 and by ESF Investing in your future. C.P.G. thanks the grant PID2023-150574NB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced stability of high energy aqueous capacitor based on redox-active nanomaterials and electrolyte

  • Aina, Sergio
  • Slesinski, Adam
  • Cherkaoui, Abdenbi
  • Slesinska, Sylwia
  • Lobera, M. Pilar
  • Frackowiak, Elzbieta
  • Bernechea, María
The incorporation of redox-active species can deliver high-energy-density aqueous electrochemical capacitors by simultaneously enhancing capacitance and voltage. Building on a previously reported double-redox capacitor combining a YP50F porous carbon functionalized with Bi2S3 nanorods (NRs) as the negative electrode, a pristine YP50F positive electrode, and a 1M NaI electrolyte, in this work we investigated the effect of reducing Bi2S3 particle size and increasing its loading. Incorporating 15 % wt. Bi2S3 nanoparticles (NPs) delivered a capacitance of 235 F g−1 at 0.5 A g−1 and 193 F g−1 at 10 A g−1, outperforming the device with a 10 % wt. NPs loading and the NRs-based hybrid at high rates. The energy output of the full cell (18.3 Wh kg−1) surpassed other aqueous devices using carbon-based or other bismuth-based anodes. Despite this improvement, the device lost 20 % of its initial capacitance after only 60 charge-discharge cycles. Electrolyte buffering and pre-iodination of the YP50F in the positive electrode improved the stability, yielding 100 % capacitance retention after 1000 cycles. Post-mortem ex situ XPS analysis revealed that these treatments suppress iodate/periodate formation and prevents oxidation of Bi-S species to sulfates, mitigating corrosion and precipitation, and securing long-term stability., S.A., A.C., M.P.L. and M.B. acknowledge MICIU/AEI/10.13039/501100011033 (Refs: PRTR-C17.I1 with funding from European Union NextGenerationEU, promoted by the Government of Aragon; PID2023-150574NB-I00 with funding from ERDF/EU; and CEX2023-001286-S), Universidad de Zaragoza for funding UZ2023-IyA-01 project, CIBER-BBN, ICTS ‘‘NANBIOSIS’’, instrumentation and technical advice provided by the National Facility ICTS ELECMI node “Laboratorio de Microscopias Avanzadas”, and Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. S.A. and M.B. acknowledge Gobierno de Aragón for a predoctoral contract to SA. E.F. and A.S. would like to acknowledge Ministry of Science and Higher Education, Poland, for funding project no. 0911/SBAD/2501. S.S. would like to acknowledge the support received from the European Research Council within Proof-of-Concept grant PoC-2023 (GA 101138710)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Issues of using benzyl ether in nanomaterials’ synthesis: Insights for a standardized synthesis of FeWOx nanocrystals and their use as photocatalysts

  • Boix, Raúl
  • Lobera, M. Pilar
  • Bernechea, María
The synthesis of nonstoichiometric FeWOx nanocrystals via thermal decomposition in benzyl ether has been systematically optimized, addressing reproducibility issues typically associated with this solvent. A key finding of this work is the identification of benzoic acid, a benzyl ether oxidation byproduct, as a necessary ligand for stabilizing tungsten intermediates and enabling consistent FeWOx formation. The optimized protocol allows fine-tuning of the Fe/W atomic ratio, leading to a series of materials with tailored stoichiometry, surface properties, and electronic structure. Fe1.5WOx, Fe1.0WOx, and Fe0.1WOx have been selected as representative examples of materials with Fe excess, slight Fe excess, and an Fe/W ratio close to 1. Among them, Fe0.1WOx exhibited the best photocatalytic performance in the degradation of rifampicin under simulated solar irradiation, achieving a 67% degradation within 150 min and displaying a kinetic rate constant (0.0076 min–1) three times higher than the other compositions. This superior activity is attributed to its reduced band gap (1.45 eV) and favorable band-edge positions. Scavenger experiments confirmed that holes and hydroxyl radicals (•OH) are the main reactive species involved in the degradation process. These findings provide key insights for designing reproducible benzyl ether-based syntheses and demonstrate the potential of FeWOx nanomaterials for photocatalytic water treatment applications., The authors acknowledge MICIU/AEI/10.13039/501100011033 for funding FPU19/01935 with additional funding from ESF Investing in Your Future, PID2023-150574NB-I00 with funding from ERDF/EU, and grant CEX2023-001286-S. They also acknowledge Universidad de Zaragoza for funding the UZ2023-IyA-01 project, CIBER-BBN, ICTS NANBIOSIS, and the instrumentation and technical advice provided by the National Facility ICTS ELECMI node “Laboratorio de Microscopías Avanzadas”; as well as the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring oxygen electrocatalysis in phosphonium ionic liquids towards sodium–oxygen batteries

  • García Quintana, Laura
  • Ha, The An
  • Hughson, Fraser R.
  • Howlett, Patrick C.
  • Bond, Alan M.
  • O'Dell, Luke A.
  • Ortiz-Vitoriano, N.
  • Pozo Gonzalo, Cristina
8 figures, 4 tables., Sodium–oxygen (Na–O2) batteries are attractive candidates for high-energy storage systems; however, their long-term operation is hindered by the instability of highly reactive intermediates such as the superoxide anion (O2•−). Ionic liquids (ILs) have emerged as promising electrolytes not only because of their intrinsic safety but also due to their ability to stabilise electrogenerated species. Building on our previous studies of the oxygen reduction reaction (ORR) in neat triisobutyl(methyl)phosphonium ([P1i4i4i4]+)-based ILs and inspired by encouraging reports on sodium electrochemistry, we here investigate the electrochemical behaviour of [P1i4i4i4]+-based electrolytes combined with NaFSI and NaFTFSI (FSI = bis(fluorosulfonyl)imide anions) and FTFSI = fluorosulfonyl)(trifluoromethanesulfonyl)imide) salts. A comprehensive cyclic voltammetry study, complemented by impedance spectroscopy, Fourier transformed infrared, and 23Na nuclear magnetic resonance, identified the optimal electrolyte composition in terms of salt concentration and anion. Notably, the use of [P1i4i4i4][FSI] with 30 mol% NaFSI enabled a Na–O2 cell to sustain more than 100 cycles, representing the highest cycling stability reported to date for an IL-based electrolyte. These results underscore the critical role of electrolyte formulation on ORR/OER pathways and provide valuable electrochemical insights for the rational design of IL-based electrolytes for Na–O2 batteries., This study was supported by Ministerio de Ciencia, Innovación y Universidades (grant RYC2020-030104), Ministerio de Ciencia, Innovación y Universidades (PID2023-150574NB-I00), Gobierno de Aragón (grant T03_23R), and Centre of Excellence for Electromaterials Science, Australian Research Council (grant CE140100012)., L.G.-Q., T.A.H., P.C.H., and C.P.-G. gratefully acknowledge financial support from the Australian Research Council (ARC) through the ARC Centre of Excellence for Electromaterials Science (ACES) (project ID: CE140100012). Deakin University's Advanced Characterization Facility is acknowledged for the use of the NMR instrumentation. N. Ortiz-Vitoriano acknowledges grant RYC2020-030104-I funded by MICIU/AEI/10.13039/501100011033 and by ESF Investing in your future. CPG thanks the grant PID2023-150574NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU and the funding from Gobierno de Aragon (DGA) under project T03_23R (Grupos Reconocidos)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced stability of high energy aqueous capacitor based on redox-active nanomaterials and electrolyte

  • Aina, Sergio
  • Slesinski, Adam
  • Cherkaoui, Abdenbi
  • Slesinska, Sylwia
  • Lobera, M. Pilar
  • Frackowiak, Elzbieta
  • Bernechea, María
The incorporation of redox-active species can deliver high-energy-density aqueous electrochemical capacitors by simultaneously enhancing capacitance and voltage. Building on a previously reported double-redox capacitor combining a YP50F porous carbon functionalized with Bi2S3 nanorods (NRs) as the negative electrode, a pristine YP50F positive electrode, and a 1M NaI electrolyte, in this work we investigated the effect of reducing Bi2S3 particle size and increasing its loading. Incorporating 15 % wt. Bi2S3 nanoparticles (NPs) delivered a capacitance of 235 F g−1 at 0.5 A g−1 and 193 F g−1 at 10 A g−1, outperforming the device with a 10 % wt. NPs loading and the NRs-based hybrid at high rates. The energy output of the full cell (18.3 Wh kg−1) surpassed other aqueous devices using carbon-based or other bismuth-based anodes. Despite this improvement, the device lost 20 % of its initial capacitance after only 60 charge-discharge cycles. Electrolyte buffering and pre-iodination of the YP50F in the positive electrode improved the stability, yielding 100 % capacitance retention after 1000 cycles. Post-mortem ex situ XPS analysis revealed that these treatments suppress iodate/periodate formation and prevents oxidation of Bi-S species to sulfates, mitigating corrosion and precipitation, and securing long-term stability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Issues of Using Benzyl Ether in Nanomaterials’ Synthesis: Insights for a Standardized Synthesis of FeWO<sub><i>x</i></sub> Nanocrystals and Their Use as Photocatalysts

  • Boix, Raúl
  • Lobera, M. Pilar
  • Bernechea, María
The synthesis of nonstoichiometric FeWOx nanocrystals via thermal decomposition in benzyl ether has been systematically optimized, addressing reproducibility issues typically associated with this solvent. A key finding of this work is the identification of benzoic acid, a benzyl ether oxidation byproduct, as a necessary ligand for stabilizing tungsten intermediates and enabling consistent FeWOx formation. The optimized protocol allows fine-tuning of the Fe/W atomic ratio, leading to a series of materials with tailored stoichiometry, surface properties, and electronic structure. Fe1.5WOx, Fe1.0WOx, and Fe0.1WOx have been selected as representative examples of materials with Fe excess, slight Fe excess, and an Fe/W ratio close to 1. Among them, Fe0.1WOx exhibited the best photocatalytic performance in the degradation of rifampicin under simulated solar irradiation, achieving a 67% degradation within 150 min and displaying a kinetic rate constant (0.0076 min–1) three times higher than the other compositions. This superior activity is attributed to its reduced band gap (1.45 eV) and favorable band-edge positions. Scavenger experiments confirmed that holes and hydroxyl radicals (•OH) are the main reactive species involved in the degradation process. These findings provide key insights for designing reproducible benzyl ether-based syntheses and demonstrate the potential of FeWOx nanomaterials for photocatalytic water treatment applications.