Pasar al contenido principal

TECNOLOGIAS DE ANTENAS EN SUB-TERAHERCIOS PARA COMUNICACIONES EN EL CAMINO HACIA EL 6G

PID2023-151385OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Fabricación de un filtro robusto basado en una guía de onda multicapa metálica en banda W

  • García-Martínez, Sergio
  • Santiago Arriazu, David
  • Tamayo-Domínguez, Adrián
  • Sánchez-Olivares, Pablo
  • Arregui Padilla, Iván
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
Este trabajo presenta el diseño y la validación experimental de un filtro de cavidad de guía de onda en banda W que opera en torno a 91 GHz, empleando una estructura periódica en su banda prohibida con simetría de deslizamiento para implementar el filtro en múltiples láminas metálicas delgadas apiladas sin contacto eléctrico entre ellas. El filtro se basa en cavidades apiladas verticalmente que utilizan el modo TE103, lo que ofrece una mayor robustez frente a errores de fabricación y montaje. El filtro propuesto mantiene bajas pérdidas en el rango de frecuencias de 88-94 GHz, incluso con variaciones de separación entre láminas de hasta 20 micras. El filtro se fabrica mediante corte por láser, con lo que se consigue una baja rugosidad superficial y una gran precisión dimensional. Las mediciones experimentales muestran una excelente concordancia con las simulaciones y demuestran la posibilidad de conseguir filtros de altas prestaciones en frecuencias de ondas milimétricas, manteniendo una baja complejidad y coste de fabricación mediante el uso de la tecnología de guía de onda multicapa combinada con el corte a láser., Este trabajo ha sido financiado parcialmente por el Gobierno de España, Ministerio de Ciencia, Innovación y Universidades, mediante los proyectos New Array Antenna Technologies and Digital Processing for the Future Integrated Terrestrial and Space-based Millimeter Wave Radio Systems UPMInTerSpaCE (PID2020-112545RB-C51), Filters and Passive Components for Future Integrated Terrestrial and Spacebased Millimeter Wave Radio Systems UPNA-InTerSpaCE (PID2020-112545RB-C53) y Sub-Terahertz Antenna Technologies for Communications In the Road to 6G UPMSTAIRto6G (PID2023-151385OA-I00) financiados por MICIU/AEI/10.13039/501100011033 y FEDER, UE. El trabajo de S. Garcia-Martinez ha sido financiado parcialmente por la Universidad Politécnica de Madrid (Programa Propio).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Robust filter design built in a contactless metallic multilayer waveguide at W-band

  • Garcia-Martinez, Sergio (0000-0002-2427-8264)
  • Santiago Arriazu, David
  • Tamayo-Domínguez, Adrián
  • Sánchez-Olivares, Pablo
  • Arregui Padilla, Iván
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Fernández-González, José Manuel
This article presents the design and experimental validation of a W-band waveguide cavity filter operating around 91 GHz, using a periodic electromagnetic bandgap (EBG) structure with glide symmetry to implement the filter in a stack of multiple thin metallic sheets without electric contact between them. The filter is based on vertically stacked cavities that use the TE103 mode, which offers increased robustness to manufacturing and assembly errors due to the large dimensions of the cavity. The glide-symmetric circular hole EBG structure is analyzed and integrated to suppress unwanted field leakage between the metallic layers with a broad stopband. The proposed filter maintains effective operation in the 88–94-GHz frequency range, even with gap variations between layers of up to 20 µm. The filter is fabricated using laser cutting, achieving a low surface roughness and high dimensional accuracy. Experimental measurements show excellent agreement with the simulations, with a return loss greater than 20 dB and an insertion loss below 0.5 dB. These results demonstrate the possibility to achieve high performance filters at millimeter-wave frequencies while maintaining low fabrication complexity and cost using the multilayer waveguide technology., This work was supported in part by Spanish Government, Ministerio de Ciencia, Innovación y Universidades, through the Projects New Array Antenna Technologies and Digital Processing for the Future Integrated Terrestrial and Space-Based Millimeter Wave Radio Systems UPM-InTerSpaCE under Grant PID2020-112545RB-C51; in part by the Filters and Passive Components for Future Integrated Terrestrial and Space-based Millimeter Wave Radio Systems UPNA-InTerSpaCE under Grant PID2020-112545RB-C53; and in part by the Sub-Terahertz Antenna Technologies for Communications In the Road to 6G UPM -STAIRto6G funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE, under Grant PID2023-151385OA-I00. The work of Sergio Garcia-Martinez was supported by the Universidad Politécnica de Madrid, Programa Propio.