UPCommons. Portal del coneixement obert de la UPC
Publicación
Contribución de congreso (ConferenceOutput)
Rolling locomotion for shallow-water benthic exploration using a compact spherical underwater robot
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Shallow-water benthic environments require robotic platforms capable of operating with minimal ecological disturbance while maintaining reliable mobility and sensing. Conventional underwater vehicles typically rely on thrusters, which can resuspend sediment, increase turbidity, and introduce mechanical complexity through external moving parts and hull penetrations. This work presents a compact spherical underwater robot that achieves locomotion through internal eccentric-mass actuation, enabling a fully sealed architecture with no external propellers or mechanical penetrations, while external fins serve as the primary mechanism for effective propulsion through interaction with the surrounding fluid. The platform integrates a ROS 2-based embedded control and sensing system running on a Raspberry Pi 5, together with onboard inertial, electrical, and visual monitoring. Experimental validation was conducted at the water surface using multiple fin configurations and motor-speed conditions. Results show that fin geometry strongly influences both translational performance and dynamic stability. The nofin configuration provides the most stable response but limited traction, small fins offer the best compromise between controlled motion and effective rolling, and large fins maximize energy transfer at the cost of strong oscillatory instability at higher speeds. These findings demonstrate the feasibility of internally actuated rolling locomotion as a low-impact alternative for future benthic robotic platforms., The work acknowledges the Spanish Ministry of Science, Innovation and Universities through the SMARTME project (grant number PID2024-155344OB-C33) and Generalitat de Catalunya’s ”SARTI-MAR” 2017 SGR 371. The work was partially funded by the Spanish Ministry of Science, Innovation and Universities through the AI4SEA project (grant number AIA2025-163346-C4)., Peer Reviewed