Pasar al contenido principal

Sintesis y reciclado enzimatico de polimeros furanicos biobasados

PLEC2021-007690

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2021
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Immobilized Hydroxymethylfurfural Oxidase Enables Robust Biocatalytic Production of 2,5-Furandicarboxylic Acid from Crude 5-Hydroxymethylfurfural

  • Concha, Darly|||0000-0003-2823-5437
  • Ortiz-Orruño, Garazi|||0000-0001-6013-7920
  • Guillén, Marina|||0000-0002-9740-9966
  • Romero, Oscar|||0000-0002-0223-5167
  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
Bioplastics such as poly(ethylene 2,5-furandicarboxylate) (PEF), synthesized from biobased 2,5-furandicarboxylic acid (FDCA), offer a promising alternative to petrochemical-derived plastics. Enzymatic conversion of 5-hydroxymethylfurfural (HMF) to FDCA via hydroxymethylfurfural oxidase (HMFO) is environmentally benign but is limited by catalyst stability. This study addresses these challenges through a high-performance biocatalytic platform based on the one-step purification and immobilization of the engineered enzyme 8BxHMFO fused with a carbohydrate-binding module (CBM3). Utilizing the high affinity of CBM3 for microcrystalline cellulose (Perloza MT100), the biocatalyst achieved a significant increase in thermal stability (Tm = 53.2 °C) and enhanced resistance to oxygen interfacial inactivation. The system's efficacy was demonstrated with pure HMF (>95% conversion; 7.2 g·L-1 FDCA), and its robustness was validated using a 15% (w/w) crude extract. The biocatalyst maintained its catalytic performance in the presence of minor matrix components, exhibiting a highly competitive FDCA yield (70.6%) and titer (5.7 g·L-1). FDCA recovery was achieved with 72% efficiency using a mild ethanol-based extraction process. These findings and sustainable indicators validate the robustness of the system under realistic conditions, demonstrating its potential as a sustainable platform for FDCA production and contributing to broader PEF bioplastic adoption.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Enzyme-Driven Pathways for FDCA Production: Environmental Insights into a Scalable and Sustainable Bioprocess

  • Carballido Nogueira, Aroa
  • Arias Calvo, Ana
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
The growing demand for sustainable alternatives to petrochemical-based plastics has positioned 2,5-furandicarboxylic acid (FDCA) as a promising monomer for next-generation bioplastics like polyethylene furanoate (PEF). Among the available routes, enzymatic oxidation of 5-hydroxymethylfurfural (HMF) using 5-hydroxymethylfurfural oxidase (HMFO) stands out for its selectivity and mild operational conditions. This study aims to assess the sustainability potential of FDCA production via HMFO (including also the analysis of the enzyme production), integrating both techno-economic analysis (TEA) and life cycle assessment (LCA) methodology. Four fermentation volumes were evaluated for the HMFO production (5 L–1 m³), showing that the environmental loads decrease with scale-up, being the 1 m3 scenario the most promising one under an environmental perspective. Regarding the main contributors of the environmental profiles, glucose and cellulose are the process inputs that stand out, while renewable energy and reduced solvent input showed significant improvements in lowering burdens. Regarding the FDCA production, it was modelled both at lab and scale-up levels, including ethanol recycling as a mitigation strategy. In this case, HMF was identified as the primary hotspot across all scenarios and impact categories. On the other hand, the TEA revealed that a minimum selling price of $33.56/kg is needed to ensure that the process is economically viable, with enzyme reuse offering significant potential for cost reduction. Even though the sustainability potential has been demonstrated, both environmentally and economically, further research is needed in terms of enzyme reuse and recovery.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estrategias computacionales para el descubrimiento de enzimas en la síntesis sostenible de bioplásticos

  • Martin, Floor
  • Muñoz, Rubén
  • Martínez, Mireia
  • Roda, Sergi
  • Carro, Juan
  • Martínez, Ángel T.
  • Ruiz-Dueñas, F. J.
  • Guallar, Victor
1 p.-1 schem., Los bioplásticos ofrecen una alternativa ecológica a los polímeros convencionales derivados de petroquímicos. Sin embargo, su uso generalizado se ha visto limitado por el desafío de generar eficientemente los sustratos monoméricos necesarios para su síntesis. El polietileno furanoato (PEF),un actor crucial en este ámbito, depende de la síntesis de furano-2,5-dicarboxilato (FDCA) a partir de la oxidación de hidroximetilfurfural (HMF), un compuesto orgánico derivado de la deshidratación de azúcares reductores (Esquema 1). Las enzimas HMF oxidasas (HMFO) (EC: 1.1.3.47), dentro de la familia de las flavoproteínas oxidantes tipo glucosa-metanol-colina, son centrales en esta síntesis. A pesar de su importancia, el paso oxidativo final para producir FDCA (i.e., FFCA a FDCA)constituye la principal limitante debido a la acotada cantidad de enzimas conocidas capaces de catalizar esta reacción eficientemente. Dada la necesidad apremiante de encontrar mejores soluciones enzimáticas para agilizar el desarrollo comercial de bioplásticos, diseñamos un nuevo protocolo de bioprospección computacional, con el cual, empleando búsquedas masivas de similitud de secuencias, simulaciones Monte Carlo, cálculos de ingeniería de proteínas y aprendizaje supervisado, exploramos decenas de miles de nuevas HMFO en búsqueda de mejores catalizadores para la producción de FDCA. Con el objetivo principal de identificar nuevas enzimas que exhibieran una mejora en el paso final de oxidación, caracterizamos nuevas HMFO con buena actividad catalítica y con un gran potencial para su medra. Estos hallazgos representan un avance significativo hacia la optimización de la producción de bioplásticos. No obstante, además de ofrecer soluciones potenciales en la síntesis de PEF, también definen la frontera y las complejidades inherentes al campo de la bioprospección in silico para la concreción de nuevos descubrimientos biocatalíticos., Proyecto PLEC2021-007690 financiado por MICIU/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR; Proyecto ROBUSTOO, financiado por la Unión Europea bajo el Acuerdo de Subvención No 101135119; y Plataforma Temática Interdisciplinar Susplast, CSIC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nuevas hidroximetilfurfural oxidasas para ampliar el catálogo de biocatalizadores en la producción de ácido furandicarboxílico

  • Carro, Juan
  • Ocampos, Isabel
  • Martin, Floor
  • González-Fornell, José Manuel
  • Rincón-Sanz, Rodrigo
  • Muñoz, Rubén
  • Martínez, Mireia
  • Guallar, Victor
  • Martínez, Ángel T.
  • Ruiz-Dueñas, F. J.
1 p.-3 fig., El ácido 2,5-furandicarboxílico (FDCA) constituye un precursor interesante para la industria de plásticos biobasados como sustituto del ácido tereftálico de origen fósil gracias a su capacidad para generar polímeros al condensarse con polioles. El FDCA se produce principalmente mediante tres pasos de oxidación a partir del 5-hidroximetilfurfural (HMF), un compuesto renovable que proviene de las hexosas de la biomasa vegetal. Generalmente, en la industria, la conversión de HMF en FDCA se produce mediante procedimientos termoquímicos que requieren altas temperaturas y catalizadores nocivos. Sin embargo, existe una familia de enzimas, llamadas hidroximetilfurfural oxidasas (HMFO), que catalizan las reacciones oxidativas de transformación del HMF en FDCA en condiciones suaves. Estos biocatalizadores aún no han sido implementados debido a que presentan varias limitaciones. Por un lado, su baja actividad sobre el último intermediario de la reacción, el ácido 5-formilfurancarboxílico (FFCA), ralentiza la conversión global del proceso. Por otro, apenas existen unas pocas HMFO disponibles, ya que hasta la fecha solo se han descrito cuatro enzimas salvajes y algunas variantes modifi cadas. Estos problemas se están tratando de solucionar mediante el descubrimiento y análisis de nuevas enzimas de tipo HMFO bacterianas con las que superar la limitación impuesta por la oxidación del FFCA a FDCA. Para ello, se han empleado distintas técnicas de bioprospección computacional que han permitido identifi car una gran variedad de enzimas. Tras expresión heteróloga y caracterización de sus propiedades catalíticas se han obtenido HMFOs con actividad mejorada sobre el FFCA,alcanzándose un aumento de más de diez veces en la producción de FDCA a partir de FFCA comparado con las HMFO salvajes disponibles. Así, no solo se ha ampliado considerablemente el repertorio de enzimas de tipo HMFO, sino que también se ha mejorado el proceso enzimático en términos de productividad y rendimiento. Además, las nuevas enzimas constituyen puntos de partida de interés para la mejora posterior de sus propiedades operacionales mediante el empleo de técnicas de ingeniería de proteínas., Proyecto PLEC2021-007690 financiado por MICIU/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR; y Plataforma Temática Interdisciplinar Susplast, CSIC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-driven pathways for FDCA production: Environmental insights into a scalable and sustainable bioprocess

  • Carballido, Aroa
  • Arias, Ana
  • Carro, Juan
  • Martínez, Ángel T.
  • Ruiz-Dueñas, F. J.
  • Caminal, Gloria
  • González, Gloria
  • Guillén, Marina
  • Romero, Oscar
  • Bonet, Kirian
  • Ortiz-Orruño, Garazi
  • Darly, Concha
  • Feijoo, Gumersindo
  • Teresa Moreira, María Teresa
The growing demand for sustainable alternatives to petrochemical-based plastics has positioned 2,5-furandicar boxylic acid (FDCA) as a promising monomer for next-generation bioplastics like polyethylene furanoate (PEF). Among the available routes, enzymatic oxidation of 5-hydroxymethylfurfural (HMF) using 5-hydroxymethylfur fural oxidase (HMFO) stands out for its selectivity and mild operational conditions. This study aims to assess the sustainability potential of FDCA production via HMFO (including also the analysis of the enzyme production), integrating both techno-economic analysis (TEA) and life cycle assessment (LCA) methodology. Four fermen tation volumes were evaluated for the HMFO production (5 L–1 m³), showing that the environmental loads decrease with scale-up, being the 1 m3 scenario the most promising one under an environmental perspective. Regarding the main contributors of the environmental profiles, glucose and cellulose are the process inputs that stand out, while renewable energy and reduced solvent input showed significant improvements in lowering burdens. Regarding the FDCA production, it was modelled both at lab and scale-up levels, including ethanol recycling as a mitigation strategy. In this case, HMF was identified as the primary hotspot across all scenarios and impact categories. On the other hand, the TEA revealed that a minimum selling price of $33.56/kg is needed to ensure that the process is economically viable, with enzyme reuse offering significant potential for cost reduc tion. Even though the sustainability potential has been demonstrated, both environmentally and economically, further research is needed in terms of enzyme reuse and recovery. 1. Introduction The large use of petroleum-based plastics represents a growing environmental and economic threat, linked to the depletion of fossil resources, the generation of waste and greenhouse gas emissions. In response, initiatives such as the European Union's Circular Economy Action Plan promote a transition towards more sustainable materials, encouraging innovation in bioplastics, recyclability and products derived from renewable sources. In this context, bio-based plastics emerge as a promising alternative, which could help reduce the dependence on fossil resources and improving the environmental profile of plastic products (Di Bartolo et al., 2021). Although their market penetration is still limited, their development is favored by current and, This study was supported by the STAR4BBS project (No. STAR4BBS project (No. 101060588), funded by the European Commission under Horizon-CL6- 2021-ZEROPOLLUTION-01) and by FURENPOL project (Grant Agree ment PLEC2021–007690), funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) and the Euro pean Union through the Next Generation EU/PRTR initiative. A. Arias also thanks the Galician Government for financial support (Grant reference ED481B-2023–072). A. Arias, G. Feijoo and M.T. Moreira authors belong to the Galician Competitive Research Group (ED431C- 2025/19) and to the Cross-disciplinary Research in Environmental Technologies (CRETUS, ED431G 2023/12)., Peer reviewed