Pasar al contenido principal

Predictive Infrastructure Maintenance using Intelligent Remote Monitoring and Integrated Dynamic Modelling

PLEC2021-007842

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2021
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE TECNOLOGIC DE TELECOMUNICACIONS DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applications of UAV Digital Photogrammetry in landslide emergency response and recovery activities: the case study of a slope failure in the A-7 highway (S Spain)

  • Galve, Jorge Pedro
  • Pérez García, José Luis
  • Ruano, Patricia
  • Gómez López, José M.
  • Reyes-Carmona, Cristina
  • Moreno-Sánchez, Marcos
  • Jérez-Longres, Paula Sofía
  • Ghadimi, Mehrnoosh
  • Barra, Anna
  • Mateos Ruiz, Rosa María
  • Monserrat, Oriol
  • Azañón, José Miguel
[EN] The disruption of vehicle traffic on important transport infrastructure has a major economic impact. Therefore, the instability of highway cut-slopes poses a significant risk for major infrastructures crossing mountainous regions and rocky coasts. The use of Uncrewed Aerial Vehicles (UAVs) is of great help in the prevention of road cut-slope failures and in emergency and rehabilitation of sites impacted by this type of landslides. Here, we show an example of UAV operations in emergency response and recovery in a highway cut-slope failure. We analyzed a failure that occurred on 11 March 2021 in a 52-m-high cut-slope located at 354.3 km of the A-7 Highway (S Spain). We also examine the applications of these analyses to help in risk evaluation and management. We acquired 3050 images and 6 videos with UAVs during 5 field surveys from 11 to 31 March 2021 to follow the evolution of the destabilized cut-slope. The videos taken by UAVs were of great help in the emergency response phase to guide the first steps in the removal of unstable rock blocks. The acquired images served to generate sequential Digital Elevation Models (DEMs) and 3D models (i.e., point clouds and tiled models) using the Digital Photogrammetry technique. These models were used subsequently to identify changes in the topography and calculate volumes of both destabilized and excavated material. The volumetric analyses indicate that 6200 m<sup>3</sup> of rock collapsed, producing a deposit of debris of 10,900 m<sup>3</sup>, and after the partial failure, 15,100 m<sup>3</sup> of the slope remained unstable. Therefore, the volume of rock mobilized by the landslide was about 21,300 m<sup>3</sup>. The recovery activities involved the removal of the collapsed debris and the re-profiling of the slope. This involved the excavation, transportation, and deposition of 83,400 m<sup>3</sup> of rock to reduce the slope’s inclination from 64° to 45–33°. We then analyzed the follow-up work generating sequential DEMs during the cut-slope excavation in order to forecast the approximate date of the highway reopening. Thus, an average excavation speed of 1075 m<sup>3</sup>/day was estimated, and with this value, by March 31, it was possible to initially forecast that the highway could be reopened in the first week of June, not far from June 10, the date on which it was finally reopened. These results were obtained with reduced equipment costs and field time over topography conventional methods, which indicates the usefulness of UAVs and Digital Photogrammetry (UAV-DP) in emergency response and recovery situations provoked by unstable slopes in roads., Funding for open access publishing: Universidad de Granada/CBUA. This work was mainly supported by two funds: in its initial phase of data acquisition by the European Regional Development Fund (ERDF) through the project “RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE program and in the final phase of data treatment and analysis the Spanish Grant PROMETEO (PLEC2021-007842) funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” program. The work of J.P.G., M.M-S., P.R., and J.M.A. was also supported by the “Ramón y Cajal” program (RYC-2017–23335) of the Spanish Ministry of Science, the projects “MORPHOMED” (PID2019-107138RB-I00) and “LANDMARC” (PID2023-149821NB-I00) funded by MCIN / SRA (State Research Agency / https://doi.org/10.13039/501100011033), and the projects “RADANDALUS” (P18-RT-3632) and A-RNM-508-UGR20 of the FEDER / Junta de Andalucía-Consejería de Transformación Económica, Industria, Conocimiento y Universidades., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Wide area maps of building differential deformations

  • Crosetto, Michele
  • Shahbazi, Saeedeh|||0000-0002-4894-9608
  • Barra, Anna|||0000-0001-6254-7931
The European Ground Motion Service (EGMS) uses Sentinel-1 data to monitor and measure land displacement across Europe, delivering information on ground motion phenomena. The EGMS service includes three types of products, enabling the analysis of annually updated ground motion data. The authors are working on a project aimed at computing the spatial gradient of land deformation and generating wide-area differential deformation maps. This type of maps can help identifying potentially vulnerable buildings and urban structures. The project involves developing a software pipeline to compute and convert original deformation data and creating a customized web viewer to display the results. Given the large volume of the processed datasets, with several millions of measurement points an accurate algorithm implementation is needed. The resulting information will aid in monitoring anthropogenic phenomena and their impact on building and infrastructures. This will be essential for urban management and risk mitigation planning., This work has been partially funded by AGAUR, Generalitat de Catalunya, through the Consolidated Research Group RSE, “Geomatics” (Ref: 2021-SGR-00536). This work is also part of the Spanish Grant PROMETEO, PLEC2021-007842, funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Wide area maps of building differential deformations

  • Crosetto, Michele
  • Shahbazi, Saeedeh
  • Barra, Anna
The European Ground Motion Service (EGMS) uses Sentinel-1 data to monitor and measure land displacement across Europe, delivering information on ground motion phenomena. The EGMS service includes three types of products, enabling the analysis of annually updated ground motion data. The authors are working on a project aimed at computing the spatial gradient of land deformation and generating wide-area differential deformation maps. This type of maps can help identifying potentially vulnerable buildings and urban structures. The project involves developing a software pipeline to compute and convert original deformation data and creating a customized web viewer to display the results. Given the large volume of the processed datasets, with several millions of measurement points an accurate algorithm implementation is needed. The resulting information will aid in monitoring anthropogenic phenomena and their impact on building and infrastructures. This will be essential for urban management and risk mitigation planning., This work has been partially funded by AGAUR, Generalitat de Catalunya, through the Consolidated Research Group RSE, “Geomatics” (Ref: 2021-SGR-00536). This work is also part of the Spanish Grant PROMETEO, PLEC2021-007842, funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, Peer Reviewed, Postprint (published version)