Pasar al contenido principal

DEVELOPMENT OF HIGH RESOLUTION DIGITAL TWINS TO FAST PREDICTION OF AIR POLLUTANTS DISTRIBUTION AND THE ODOUR IMPACT IN CITIES BASED ON THE APPLICATION OF ARTIFICIAL INTELLIGENCE TO CFD MODELS (APPWIND)

PLEC2021-007943

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2021
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Toward high-fidelity simulations of urban flows: mean-flow statistics

  • Teng, Ming
  • Duró Diaz, Josep Maria
  • Muñoz Blanco, Naïm
  • Mestres Manzanares, Ernest|||0009-0005-6901-2258
  • Muela Castro, Jordi|||0000-0003-1583-8490
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
This paper demonstrates the capabilities of high-fidelity wall-modeled large-eddy simulations (LES) in characterizing the flow features of a neutral atmospheric boundary-layer over a full-scale urban geometry. Two idealized geometries are considered: an array of three-dimensional square prisms and the "Michelstadt" geometry model. In both cases, the incident wind angle is 0°, and the Reynolds number is ReH = Ure ƒH/¿ ~ O(6), where Ure ƒ denotes the reference velocity, H the height of the tallest building, and ¿ the kinematic viscosity. The LES employs a high-order, low-dissipation numerical scheme with a spatial resolution of 0.75m within the urban canopy. The numerical results exhibit good agreements with experimental data. The discussion focuses on the region below the roughness sublayer, presenting both first- and second-order mean statistics., This work has been partially financially supported by ‘Agència de Gestió d’Ajuts Universitaris i de Recerca’ under the call CLIMA 2023 (ref. 2023 CLIMA 00097) and the APPWIND project (ref.: PLEC2021-007943). O. Lehmkuhl’s work is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I). The authors acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (ref.: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (ref.: 2021 SGR 01051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Atmospheric boundary layer over urban roughness: validation of large-eddy simulation

  • Teng, Ming
  • Duró Diaz, Josep Maria
  • Mestres Manzanares, Ernest|||0009-0005-6901-2258
  • Muela Castro, Jordi|||0000-0003-1583-8490
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
The study presents wall-modeled large-eddy simulations (LES) characterizing the flow features of a neutral atmospheric boundary layer over two urban-like roughness geometries: an array of three-dimensional square prisms and the “Michel-Stadt” geometry model. The former is an arrangement of idealized building blocks and incorporates a 7x7 array of wall-mounted prisms with identical spacing ratios in both transversal and longitudinal directions. The latter mimics a typical central European urban geometry, which presents spatial inhomogeneity in all directions. In both cases, the incident wind angle is 0°. The Reynolds numbers for each case are Reh = 5.0*10^6 and 8.0*10^6¿, respectively (¿ Reh = Uref*H/v with Uref and H denoting the reference velocity and building height, respectively, and v the kinematic viscosity). The LES employs a high-order, low-dissipation numerical scheme with a spatial resolution of 0.75¿m within the urban canopy. An online precursor simulation ensures realistic turbulent inflow conditions, improving the accuracy of the results. The simulations performed successfully capture mean-velocity profiles, wake regions, and rooftop acceleration, with excellent agreement in the streamwise velocity component. While turbulent kinetic energy is well predicted at most locations, minor discrepancies are observed near the ground, partially due to insufficient near-wall resolution and measurement constraints. The analysis of scatter plots and validation metrics (FAC2 and hit rate) shows that LES predictions outperform the standard criteria commonly used in urban flow simulations, while spectral analysis verifies that LES accurately resolves the turbulent energy cascade over approximately two frequency decades. The Kolmogorov -2/3 slope in the pre-multiplied spectra has been well reproduced below and above the urban canopy. These findings reinforce the importance of spectral analysis in LES validation and highlight the potential of high-order methods for LES of urban flows., This work has been partially financially supported by “Agencia de Gestiod’Ajuts Universitaris i de Recerca” under the call CLIMA 2023 (ref. 2023 CLIMA 00097) and the APPWIND project (ref. PLEC2021-007943). O. Lehmkuhl’s work is financed by a Ramon y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigacion, Desarrollo e Innovacion, Spain (RYC2018-025949-I). The authors acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (ref. 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (ref. 2021 SGR 01051).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Atmospheric boundary layer over urban roughness: Insights from mean-flow statistics

  • Teng, Ming
  • Duró Diaz, Josep Maria
  • Mestres Manzanares, Ernest|||0009-0005-6901-2258
  • Muela Castro, Jordi|||0000-0003-1583-8490
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A wall-modeled large-eddy simulation database of an atmospheric flow over urban configurations (Teng et al. Phys. Fluids 37, 065129, 2025), obtained using a high-fidelity spectral-element method, is analyzed. The database comprises two urban geometries: (i) an in-line array of cubic prisms and (ii) a heterogeneous Michelstadt model, with plan area densities of 𝜆𝑝 = 0.25 and 0.31, and frontal area densities of 𝜆𝑓 = 0.25 and 0.24, respectively. In both cases, the incident wind angle is 0◦. The corresponding Reynolds numbers based on the mean building heights are 𝑅𝑒𝐻 = 5.0 × 106 and 6.0 × 106, respectively (𝐻 denotes the mean building height). The present study addresses the mean-flow behavior of the atmospheric boundary layer over these two urban configurations, with particular emphasis on the effects of urban configuration within the roughness sublayer. In addition to conventional mean statistics, turbulence anisotropy is characterized through the anisotropy invariant function and the Lumley triangle. The results reveal that heterogeneity in the Michelstadt configuration generates a more complex and spatially varying flow field, in contrast to the periodicity of the cube array. The thickness of the roughness sublayer in Michelstadt case is substantially higher than that in the array of cubic prisms. In both cases, the spatial distribution of the anisotropy invariant function exhibits an inverse relationship with the turbulent kinetic energy, attributed to the dominance of the streamwise Reynolds stress. These findings provide deeper insights into roughness-induced flow patterns and reference data for parameterizations within urban canopy., This work has been partially financially supported by ‘Agència de Gestió d’Ajuts Universitaris i de Recerca’ under the call CLIMA 2023 (ref. 2023 CLIMA 00097) and the APPWIND project (ref.: PLEC2021007943). O. Lehmkuhl’s work is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I). The authors ackowledge the Departament de Recerca i Universitats de la Generalitat de Catalunya for supporting the research groups Large-scale Computational Fluid Dynamics (ref.: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (ref.: 2021 SGR 01051)., Peer Reviewed, 3 - Salut i Benestar, 9 - Indústria, Innovació i Infraestructura, 3.d - Reforçar la capacitat de tots els països, en particular els països en desenvolupament, en matèria d’alerta primerenca, reducció de riscos i gestió dels riscos per a la salut nacional i mundial, 9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupament per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, 11 - Ciutats i Comunitats Sostenibles, 11.3 - Per a 2030, augmentar la urbanització inclusiva i sostenible, així com la capacitat de planificar i gestionar de manera participativa, integrada i sostenible els assentaments humans a tots els països, 11.6 - Per a 2030, reduir l’impacte ambiental negatiu per capita de les ciutats, amb especial atenció a la qualitat de l’aire, així com a la gestió dels residus municipals i d’altre tipus, 13 - Acció per al Clima, 13.3 - Millorar l’educació, la conscienciació i la capacitat humana i institucional en relació amb la mitigació del canvi climàtic, l’adaptació a aquest, la reducció dels efectes i l’alerta primerenca
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Atmospheric boundary layer over urban roughness: validation of large-eddy simulation

  • Teng, Ming
  • Duró Diaz, Josep Maria
  • Mestres Manzanares, Ernest
  • Muela Castro, Jordi
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
The study presents wall-modeled large-eddy simulations (LES) characterizing the flow features of a neutral atmospheric boundary layer over two urban-like roughness geometries: an array of three-dimensional square prisms and the “Michel-Stadt” geometry model. The former is an arrangement of idealized building blocks and incorporates a 7x7 array of wall-mounted prisms with identical spacing ratios in both transversal and longitudinal directions. The latter mimics a typical central European urban geometry, which presents spatial inhomogeneity in all directions. In both cases, the incident wind angle is 0°. The Reynolds numbers for each case are Reh = 5.0*10^6 and 8.0*10^6¿, respectively (¿ Reh = Uref*H/v with Uref and H denoting the reference velocity and building height, respectively, and v the kinematic viscosity). The LES employs a high-order, low-dissipation numerical scheme with a spatial resolution of 0.75¿m within the urban canopy. An online precursor simulation ensures realistic turbulent inflow conditions, improving the accuracy of the results. The simulations performed successfully capture mean-velocity profiles, wake regions, and rooftop acceleration, with excellent agreement in the streamwise velocity component. While turbulent kinetic energy is well predicted at most locations, minor discrepancies are observed near the ground, partially due to insufficient near-wall resolution and measurement constraints. The analysis of scatter plots and validation metrics (FAC2 and hit rate) shows that LES predictions outperform the standard criteria commonly used in urban flow simulations, while spectral analysis verifies that LES accurately resolves the turbulent energy cascade over approximately two frequency decades. The Kolmogorov -2/3 slope in the pre-multiplied spectra has been well reproduced below and above the urban canopy. These findings reinforce the importance of spectral analysis in LES validation and highlight the potential of high-order methods for LES of urban flows., This work has been partially financially supported by “Agencia de Gestiod’Ajuts Universitaris i de Recerca” under the call CLIMA 2023 (ref. 2023 CLIMA 00097) and the APPWIND project (ref. PLEC2021-007943). O. Lehmkuhl’s work is financed by a Ramon y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigacion, Desarrollo e Innovacion, Spain (RYC2018-025949-I). The authors acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (ref. 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (ref. 2021 SGR 01051)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Atmospheric boundary layer over urban roughness: Insights from mean-flow statistics

  • Teng, Ming
  • Duró Diaz, Josep Maria
  • Mestres Manzanares, Ernest
  • Muela Castro, Jordi
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A wall-modeled large-eddy simulation database of an atmospheric flow over urban configurations (Teng et al. Phys. Fluids 37, 065129, 2025), obtained using a high-fidelity spectral-element method, is analyzed. The database comprises two urban geometries: (i) an in-line array of cubic prisms and (ii) a heterogeneous Michelstadt model, with plan area densities of 𝜆𝑝 = 0.25 and 0.31, and frontal area densities of 𝜆𝑓 = 0.25 and 0.24, respectively. In both cases, the incident wind angle is 0◦. The corresponding Reynolds numbers based on the mean building heights are 𝑅𝑒𝐻 = 5.0 × 106 and 6.0 × 106, respectively (𝐻 denotes the mean building height). The present study addresses the mean-flow behavior of the atmospheric boundary layer over these two urban configurations, with particular emphasis on the effects of urban configuration within the roughness sublayer. In addition to conventional mean statistics, turbulence anisotropy is characterized through the anisotropy invariant function and the Lumley triangle. The results reveal that heterogeneity in the Michelstadt configuration generates a more complex and spatially varying flow field, in contrast to the periodicity of the cube array. The thickness of the roughness sublayer in Michelstadt case is substantially higher than that in the array of cubic prisms. In both cases, the spatial distribution of the anisotropy invariant function exhibits an inverse relationship with the turbulent kinetic energy, attributed to the dominance of the streamwise Reynolds stress. These findings provide deeper insights into roughness-induced flow patterns and reference data for parameterizations within urban canopy., This work has been partially financially supported by ‘Agència de Gestió d’Ajuts Universitaris i de Recerca’ under the call CLIMA 2023 (ref. 2023 CLIMA 00097) and the APPWIND project (ref.: PLEC2021007943). O. Lehmkuhl’s work is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I). The authors ackowledge the Departament de Recerca i Universitats de la Generalitat de Catalunya for supporting the research groups Large-scale Computational Fluid Dynamics (ref.: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (ref.: 2021 SGR 01051)., Peer Reviewed, 3 - Salut i Benestar, 9 - Indústria, Innovació i Infraestructura, 3.d - Reforçar la capacitat de tots els països, en particular els països en desenvolupament, en matèria d’alerta primerenca, reducció de riscos i gestió dels riscos per a la salut nacional i mundial, 9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupament per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, 11 - Ciutats i Comunitats Sostenibles, 11.3 - Per a 2030, augmentar la urbanització inclusiva i sostenible, així com la capacitat de planificar i gestionar de manera participativa, integrada i sostenible els assentaments humans a tots els països, 11.6 - Per a 2030, reduir l’impacte ambiental negatiu per capita de les ciutats, amb especial atenció a la qualitat de l’aire, així com a la gestió dels residus municipals i d’altre tipus, 13 - Acció per al Clima, 13.3 - Millorar l’educació, la conscienciació i la capacitat humana i institucional en relació amb la mitigació del canvi climàtic, l’adaptació a aquest, la reducció dels efectes i l’alerta primerenca, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Toward high-fidelity simulations of urban flows: mean-flow statistics

  • Teng, Ming
  • Duró Diaz, Josep Maria
  • Muñoz Blanco, Naïm
  • Mestres Manzanares, Ernest
  • Muela Castro, Jordi
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
This paper demonstrates the capabilities of high-fidelity wall-modeled large-eddy simulations (LES) in characterizing the flow features of a neutral atmospheric boundary-layer over a full-scale urban geometry. Two idealized geometries are considered: an array of three-dimensional square prisms and the "Michelstadt" geometry model. In both cases, the incident wind angle is 0°, and the Reynolds number is ReH = Ure ƒH/¿ ~ O(6), where Ure ƒ denotes the reference velocity, H the height of the tallest building, and ¿ the kinematic viscosity. The LES employs a high-order, low-dissipation numerical scheme with a spatial resolution of 0.75m within the urban canopy. The numerical results exhibit good agreements with experimental data. The discussion focuses on the region below the roughness sublayer, presenting both first- and second-order mean statistics., This work has been partially financially supported by ‘Agència de Gestió d’Ajuts Universitaris i de Recerca’ under the call CLIMA 2023 (ref. 2023 CLIMA 00097) and the APPWIND project (ref.: PLEC2021-007943). O. Lehmkuhl’s work is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I). The authors acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (ref.: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (ref.: 2021 SGR 01051)., Peer Reviewed, Postprint (author's final draft)