Pasar al contenido principal

3D (bio)printing for integrating BIOMimetic Electronics into Engineered Tissues: A giant leap in regenerative medicine (3D-BIOMEET)

PLEC2022-009279

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Engineering Poly(lactic Acid)-Based Scaffolds for Abundant, Sustained, and Prolonged Lactate Release

  • Haro Gutiérrez, Pilar A.
  • Colombi, Samuele
  • Casanovas Salas, Jordi
  • Resina, Leonor
  • Sans, Jordi
  • Engel, Elisabeth
  • Enshaei, Hamidreza
  • García-Torres, José
  • Pérez-Madrigal, Maria M.
  • Alemán, Carlos
Recent studies have revealed that cardiac tissue regeneration is promoted by administering an initial dose of exogenous lactate and locally maintaining an abundant concentration of this compound for a prolonged period (i.e., around 10–14 days) through sustained release. The aim of this study is to develop a scaffold based on poly(lactic acid) (PLA) for achieving a sustained daily release of lactate from the first day to the end of the recommended period. First, a five-layered electroresponsive scaffold has been engineered using three PLA layers (first, third, and fifth), each composed of electrospun microfibers (MFs), separated by spin coated lactate (second) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) (fourth) intermediate layers. The hydrophobicity of the outer PLA layers (first and fifth) has been used to maintain the release of lactate from the intermediate second layer over 3 days, while the conducting fourth PEDOT:PSS layer has ensured a complete lactate release by electrostimulation. After that, in a second step, the same scaffold has been re-engineered to maintain the sustained release not only for a short period (3 days) but also for a prolonged period (>10 days). For this purpose, the PLA MFs of the intermediate third layer have been substituted by plasma-treated proteinase K-containing PLA MFs, obtained by electrospinning a PLA:enzyme mixture. The activity of the enzyme, which decomposes the ester bonds of PLA, combined with the effect of the plasma on the PLA structure, results in a prolonged sustained release that, in addition, can be modulated., This publication is part of the I+D+i projects PID2021-125767OB-I00, PLEC2022-009279, PID2021-128412OB-I00, PDC2022-133755-I00, and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe” and European Union Next Generation EU (REGOMUC and BIOMATCH projects). The authors thank the Agencia ̀ de Gestió d’Ajuts Universitaris i de Recerca (2021 SGR 00387) for financial support. P.A.H.-G. thanks CONACYT (México) for the financial support through a postgraduate scholarship (836603 CVU 347614). S.C. thanks the Agencia ̀ de Gestió d’Ajuts Universitaris i de Recerca (AGAUR; Generalitat de Catalunya) for a FI Fellowship. E.E. received funding from the CERCA program by the Generalitat de Catalunya and the ″Centro de Excelencia Severo Ochoa″ (grant CEX2023-001282-S, funded by MICIU/AEI/10.13039/ 501100011033). M.M.P.-M. thanks the Ministerio de Ciencia, Innovación y Universidades for the Junior Beatriz Galindo Award (BG20/00216). J.G.-T. acknowledges the Serra Hunter program of the Generalitat de Catalunya. Support for the research of E.E. and C.A. was also received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Magnetically tunable catalytic chitosan-agarose hydrogels for green H2O2 sensing: a sustainable nanozyme platform

  • Viteri León, Ángel|||0000-0002-9684-6283
  • Laugé Domènech, Júlia
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • García Torres, José Manuel|||0000-0002-3996-0274
Hydrogen peroxide (H2O2) is a key reactive species in biological, environmental, and industrial systems, creating a demand for robust, sustainable, and tunable sensing materials. Here, we report a green, simple in situ strategy to fabricate magnetically responsive catalytic chitosan-agarose hydrogels with tunable nano-microstructure and transport properties. Fe3O4 nanoparticles are generated directly within chitosan-agarose hydrogel networks using chloride- and sulfate-based iron precursors, enabling controlled modulation of nanoparticle size distribution, crystallographic plane exposure, and magnetic response without surfactants or organic solvents. We demonstrate that the choice of iron precursor governs nanoparticle nucleation kinetics and interfacial interactions with the biopolymer matrix, leading to distinct microstructural architectures that directly impact mechanical stiffness, swelling behavior, and magnetic properties. Importantly, the embedded Fe3O4 nanoparticles exhibit intrinsic peroxidase-like catalytic activity, allowing the hydrogels to function as a solid-state nanozyme platform for colorimetric H2O2 detection. Beyond static performance, we show that external magnetic fields dynamically reconfigure hydrogel properties providing reversible, field-controlled regulation of catalytic activity and sensing sensitivity. The optimized hydrogels display linear H2O2 detection up to 100 µM with sub-micromolar detection limits (< 1 µM), while offering key materials-level advantages including reusability, structural stability, and facile magnetic manipulation. This work establishes a simple approach for integrating nanozyme catalysis, magnetic actuation, and sustainable biopolymer matrices, offering a broadly applicable platform for magnetically tunable catalytic materials and responsive sensing systems., Authors acknowledge funding from MCIU/AEI /10.13039/501100011033 / FEDER, UE (PLEC2022-009279, CNS2022-136109 and PID2022-141120OB-I00) and Agència de Gestió d'Ajuts Universitaris i de Recerca de Catalunya (AGAUR) (2021 SGR 01368) for financial support. A.V. thanks AGAUR for financial support (FI-SDUR grant). J.G.-T. acknowledges the Serra Hunter program of the Generalitat de Catalunya. M.P.G. received support for the research from the Generalitat de Catalunya through the prize “ICREA Academia”. This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dual-oxide Fe3O4/MnO2 nanocatalysts immobilized in biopolymer-based hydrogels for antibiotic degradation

  • Viteri León, Ángel|||0000-0002-9684-6283
  • Lutz, Lucas
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • García Torres, José Manuel|||0000-0002-3996-0274
The development of sustainable, recoverable, and efficient catalysts for the removal of pharmaceutical pollutants from water remains a critical environmental challenge. Herein, we report multifunctional chitosan-agarose hydrogels incorporating Fe3O4 and MnO2 nanoparticles via sequential in situ precipitation to create a dual-oxide Fenton-like catalytic platform. The synthesis strategy enables homogeneous nanoparticle distribution, controlled Fe3O4 size (via sulfate or chloride precursors), and tunable MnO2 loading within an interconnected porous biopolymer matrix. Structural analyses confirmed crystalline inverse spinel Fe3O4 and amorphous ¿-MnO2 uniformly embedded in the hydrogel network. The dual-oxide configuration promotes synergistic Fe-Mn redox cycling, enhancing reactive oxygen species generation under mild conditions (pH = 7.4, room temperature). Using rifampicin as a model antibiotic, the optimized hydrogel achieved 94% degradation within 30¿min, following pseudo-first-order kinetics (k¿=¿0.194¿min¿¹), outperforming comparable reported systems. The materials exhibited soft magnetic behaviour, enabling facile magnetic recovery without metal leaching, and maintained high catalytic activity over repeated cycles. Additionally, external magnetic fields modulated degradation efficiency through magneto-mechanical effects. This work introduces a sustainable and magnetically recoverable hydrogel-based catalytic system for efficient antibiotic removal from wastewater., Authors acknowledge funding from MCIU/AEI /10.13039/501100011033 / FEDER, UE (PLEC2022–009279, CNS2022–136109 and PID2022–141120OB-I00) and Agència de Gestió d′Ajuts Universitaris i de Recerca de Catalunya (AGAUR) (2021 SGR 01368) for financial support. A.V. thanks AGAUR for financial support (FI-SDUR grant). J.G.-T. acknowledges the Serra Hunter program of the Generalitat de Catalunya. M.P.G. received support for the research from the Generalitat de Catalunya through the prize “ICREA Academia”. This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Percolation-controlled mixed ionic-electronic transport in chitosan/agarose/polypyrrole hydrogels for metal-free hydrogen peroxide sensing

  • Naranjo Tovar, David Alejandro
  • Torras Costa, Juan|||0000-0001-8737-7609
  • García Torres, José Manuel|||0000-0002-3996-0274
Designing soft materials that simultaneously achieve skin-matching mechanics, electronic functionality, and sustainable processing remains a central challenge in biointegrated electronics. Here, we report a dual biopolymer hydrogel composed of chitosan and agarose in which polypyrrole (PPy) is polymerized in situ to generate a percolated mixed ionic-electronic network for metal-free hydrogen peroxide (H2O2) sensing. By systematically varying the PPy content (0.5–12.5 wt%), we demonstrate a composition-dependent transition from ionically dominated transport to a percolated PPy conductive pathway, as evidenced by cyclic voltammetry, conductivity measurements, and impedance spectroscopy. Concurrently, increasing PPy content induces controlled pore compaction, reduced swelling, enhanced hydrolytic stability, and significant mechanical reinforcement, with Young's modulus values (1.73–3.41 MPa) within the physiological range of human skin. The optimized hydrogel exhibits a sensitivity of 146.3 ± 5.9 µA cm-2 mM-1, a detection limit of 6.3 ± 0.2 µM, and excellent linearity (R2 = 0.9967) over 0–10 mM H2O2 concentration range. Moreover, the hydrogel selectivity toward H2O2 as well as its reusability and long-term storage were confirmed. This work establishes design principles for integrating percolated conducting polymer networks within sustainable biopolymer matrices to engineer mechanically compliant, high-performance electrochemical sensing platforms., Authors acknowledge funding from MCIU/AEI /10.13039/501100011033 / FEDER, UE (PLEC2022-009279, CNS2022-136109 and PID2022-141120OB-I00) and Agència de Gestió d'Ajuts Universitaris i de Recerca de Catalunya (AGAUR) (2021 SGR 01368 and 2021 SGR 00387) for financial support. D.N. acknowledges the support of AGAUR for his PhD fellowship funding (Grant n°2023 FISDU 00296). J.G.-T. acknowledge the Serra Hunter program of the Generalitat de Catalunya. This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Magnetically tunable catalytic chitosan-agarose hydrogels for green H2O2 sensing: a sustainable nanozyme platform

  • Viteri León, Ángel
  • Laugé Domènech, Júlia
  • Ginebra Molins, Maria Pau
  • García Torres, José Manuel
Hydrogen peroxide (H2O2) is a key reactive species in biological, environmental, and industrial systems, creating a demand for robust, sustainable, and tunable sensing materials. Here, we report a green, simple in situ strategy to fabricate magnetically responsive catalytic chitosan-agarose hydrogels with tunable nano-microstructure and transport properties. Fe3O4 nanoparticles are generated directly within chitosan-agarose hydrogel networks using chloride- and sulfate-based iron precursors, enabling controlled modulation of nanoparticle size distribution, crystallographic plane exposure, and magnetic response without surfactants or organic solvents. We demonstrate that the choice of iron precursor governs nanoparticle nucleation kinetics and interfacial interactions with the biopolymer matrix, leading to distinct microstructural architectures that directly impact mechanical stiffness, swelling behavior, and magnetic properties. Importantly, the embedded Fe3O4 nanoparticles exhibit intrinsic peroxidase-like catalytic activity, allowing the hydrogels to function as a solid-state nanozyme platform for colorimetric H2O2 detection. Beyond static performance, we show that external magnetic fields dynamically reconfigure hydrogel properties providing reversible, field-controlled regulation of catalytic activity and sensing sensitivity. The optimized hydrogels display linear H2O2 detection up to 100 µM with sub-micromolar detection limits (< 1 µM), while offering key materials-level advantages including reusability, structural stability, and facile magnetic manipulation. This work establishes a simple approach for integrating nanozyme catalysis, magnetic actuation, and sustainable biopolymer matrices, offering a broadly applicable platform for magnetically tunable catalytic materials and responsive sensing systems., Authors acknowledge funding from MCIU/AEI /10.13039/501100011033 / FEDER, UE (PLEC2022-009279, CNS2022-136109 and PID2022-141120OB-I00) and Agència de Gestió d'Ajuts Universitaris i de Recerca de Catalunya (AGAUR) (2021 SGR 01368) for financial support. A.V. thanks AGAUR for financial support (FI-SDUR grant). J.G.-T. acknowledges the Serra Hunter program of the Generalitat de Catalunya. M.P.G. received support for the research from the Generalitat de Catalunya through the prize “ICREA Academia”. This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dual-oxide Fe3O4/MnO2 nanocatalysts immobilized in biopolymer-based hydrogels for antibiotic degradation

  • Viteri León, Ángel
  • Lutz, Lucas
  • Ginebra Molins, Maria Pau
  • García Torres, José Manuel
The development of sustainable, recoverable, and efficient catalysts for the removal of pharmaceutical pollutants from water remains a critical environmental challenge. Herein, we report multifunctional chitosan-agarose hydrogels incorporating Fe3O4 and MnO2 nanoparticles via sequential in situ precipitation to create a dual-oxide Fenton-like catalytic platform. The synthesis strategy enables homogeneous nanoparticle distribution, controlled Fe3O4 size (via sulfate or chloride precursors), and tunable MnO2 loading within an interconnected porous biopolymer matrix. Structural analyses confirmed crystalline inverse spinel Fe3O4 and amorphous ¿-MnO2 uniformly embedded in the hydrogel network. The dual-oxide configuration promotes synergistic Fe-Mn redox cycling, enhancing reactive oxygen species generation under mild conditions (pH = 7.4, room temperature). Using rifampicin as a model antibiotic, the optimized hydrogel achieved 94% degradation within 30¿min, following pseudo-first-order kinetics (k¿=¿0.194¿min¿¹), outperforming comparable reported systems. The materials exhibited soft magnetic behaviour, enabling facile magnetic recovery without metal leaching, and maintained high catalytic activity over repeated cycles. Additionally, external magnetic fields modulated degradation efficiency through magneto-mechanical effects. This work introduces a sustainable and magnetically recoverable hydrogel-based catalytic system for efficient antibiotic removal from wastewater., Authors acknowledge funding from MCIU/AEI /10.13039/501100011033 / FEDER, UE (PLEC2022–009279, CNS2022–136109 and PID2022–141120OB-I00) and Agència de Gestió d′Ajuts Universitaris i de Recerca de Catalunya (AGAUR) (2021 SGR 01368) for financial support. A.V. thanks AGAUR for financial support (FI-SDUR grant). J.G.-T. acknowledges the Serra Hunter program of the Generalitat de Catalunya. M.P.G. received support for the research from the Generalitat de Catalunya through the prize “ICREA Academia”. This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Engineering Poly(lactic Acid)-Based Scaffolds for Abundant, Sustained, and Prolonged Lactate Release

  • Haro Gutiérrez, Pilar A.
  • Colombi, Samuele
  • Casanovas Salas, Jordi
  • Resina, Leonor
  • Sans, Jordi
  • Engel, Elisabeth
  • Enshaei, Hamidreza
  • García-Torres, José
  • Pérez-Madrigal, Maria M.
  • Alemán, Carlos
Recent studies have revealed that cardiac tissue regeneration is promoted by administering an initial dose of exogenous lactate and locally maintaining an abundant concentration of this compound for a prolonged period (i.e., around 10–14 days) through sustained release. The aim of this study is to develop a scaffold based on poly(lactic acid) (PLA) for achieving a sustained daily release of lactate from the first day to the end of the recommended period. First, a five-layered electroresponsive scaffold has been engineered using three PLA layers (first, third, and fifth), each composed of electrospun microfibers (MFs), separated by spin coated lactate (second) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) (fourth) intermediate layers. The hydrophobicity of the outer PLA layers (first and fifth) has been used to maintain the release of lactate from the intermediate second layer over 3 days, while the conducting fourth PEDOT:PSS layer has ensured a complete lactate release by electrostimulation. After that, in a second step, the same scaffold has been re-engineered to maintain the sustained release not only for a short period (3 days) but also for a prolonged period (>10 days). For this purpose, the PLA MFs of the intermediate third layer have been substituted by plasma-treated proteinase K-containing PLA MFs, obtained by electrospinning a PLA:enzyme mixture. The activity of the enzyme, which decomposes the ester bonds of PLA, combined with the effect of the plasma on the PLA structure, results in a prolonged sustained release that, in addition, can be modulated., This publication is part of the I+D+i projects PID2021-125767OB-I00, PLEC2022-009279, PID2021-128412OB-I00, PDC2022-133755-I00, and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe” and European Union Next Generation EU (REGOMUC and BIOMATCH projects). The authors thank the Agencia ̀ de Gestió d’Ajuts Universitaris i de Recerca (2021 SGR 00387) for financial support. P.A.H.-G. thanks CONACYT (México) for the financial support through a postgraduate scholarship (836603 CVU 347614). S.C. thanks the Agencia ̀ de Gestió d’Ajuts Universitaris i de Recerca (AGAUR; Generalitat de Catalunya) for a FI Fellowship. E.E. received funding from the CERCA program by the Generalitat de Catalunya and the ″Centro de Excelencia Severo Ochoa″ (grant CEX2023-001282-S, funded by MICIU/AEI/10.13039/ 501100011033). M.M.P.-M. thanks the Ministerio de Ciencia, Innovación y Universidades for the Junior Beatriz Galindo Award (BG20/00216). J.G.-T. acknowledges the Serra Hunter program of the Generalitat de Catalunya. Support for the research of E.E. and C.A. was also received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya.