Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Simple Method to Estimate the In Situ Performance of Noise Barriers

  • Redondo, Javier|||0000-0002-5507-7799
  • Gaja-Silvestre, Pau
  • Godinho, Luis
  • Amado-Mendes, Paulo
[EN] Noise barriers are usually classified attending to their intrinsic acoustic characteristics. This is standardized by the European Standards EN 1793, parts 2 and 6, in which a single parameter, DLR or DLSI, is defined in order to quantify the sound insulation performance of noise barriers. However, the final performance of a noise barrier, quantified by the so-called insertion loss, IL is not only dependent on the insulation provided by the noise barrier, but it is as well affected by geometrical aspects and the acoustic characteristics of the environment where these noise-reducing devices are placed. In this work, we explore the relationship between the insertion loss and the acoustic insulation by means of numerical methods. Moreover, the authors propose a simple way to predict the insertion loss from a purely acoustic numerical simulation in which this parameter is obtained for a completely rigid noise barrier, and knowing the noise barrier¿s sound reduction index, in one third octave bands., This work was supported in part by the grant "PID2019-109175GB-C22" funded by MCIN/AEI/10.13039/501100011033. This work was developed within the scope of the POCI01-0247-FEDER-033990 (iNBRail) co-funded by FEDER, through the Operational Programme for Competitiveness and Internationalization (POCI), and POCI-01-0247-FEDER-033691 (HLS-Hybrid Log Shield) Projects, funded by FEDER funds through COMPETE 2020. This work was also funded by Base Funding -UIDB/04029/2020-of ISISE (Institute for Sustainability and Innovation in Structural Engineering) funded by national funds through the FCT/MCTES (PIDDAC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An equivalent lattice-modified model of interfering Bragg bandgaps and Locally Resonant Stop Bands for phononic crystal made from Locally Resonant elements

  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Godinho, Luis
  • Staliunas, Kestutis
[EN] waves is a hot topic. An important class of these metamaterials is based on phononic crystals with Locally Resonant Structure, included in those commonly known as Locally Resonant Sonic Materials. In these metamaterials, wave control is basically performed by two mechanisms: internal (or local) resonances in the scatterers that form the phononic crystal, and Bragg bandgaps due to structural periodicity. Their main control feature is the resonance peaks forming additional stop-bands away from the Bragg frequency, mainly in the low frequency regime. For some applications, coupling of the two phenomena is necessary to create a broad transmission gap. However, when both are located in close frequency ranges, some destructive interferences can occur. In this paper, the authors develop a comprehensive numerical model of periodic arrays of Hemholtz resonators, which explains in detail the physical mechanisms of this destructive interference and, simultaneously, allows the reproduction of the consequences of the interference. The numerical results are supported by experimental tests., This work was supported in part by the grant ¿PID2019-109175 GBC22¿ funded by CIN/AEI/10.13039/501100011033. This work was developed within the scope of the POCI-01-0247-FEDER-033990 (iNBRail) co-funded by FEDER, through the Operational Programme for Competitiveness and Internationalization (POCI), and POCI-01-0247- FEDER-033691 (HLS¿Hybrid Log Shield) Projects, funded by FEDER funds through COMPETE 2020. This work was also funded by Base Funding ¿UIDB/04029/2020¿of ISISE (Institute for Sustainability and Innovation in Structural Engineering) funded by national funds through the FCT/MCTES (PIDDAC). This work was also funded from European Social Fund (project No 09.3.3- LMT-K712-17- 0016), also from the Spanish Ministerio de Ciencia e Innovacion ¿ under grant No.385 (PID2019-109175 GB-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects after 1500 Hardening Days on the Microstructure and Durability-Related Parameters of Mortars Produced by the Incorporation of Waste Glass Powder as a Clinker Replacement

  • Tremiño, Rosa María
  • Letelier, Viviana
  • Branco, Fernando G.
  • Ortega, José Marcos
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] One of the ways of lessening the CO2 emissions of cement industry consists of replacing clinkers with supplementary cementitious materials. The required service life of real construction elements is long, so it is useful to characterize the performance of these materials in the very long term. Here, the influence of incorporating waste glass powder as a supplementary cementitious material, regarding the microstructure and durability of mortars after 1500 hardening days (approximately 4 years), compared with reference mortars without additions, was studied. The percentages of clinker replacement by glass powder were 10% and 20%. The microstructure was studied using impedance spectroscopy and mercury intrusion porosimetry. Differential thermal and X-ray diffraction analyses were performed for assessing the pozzolanic activity of glass powder at the end of the time period studied. Water absorption after immersion, the steady-state diffusion coefficient, and length change were also determined. In view of the results obtained, the microstructure of mortars that incorporated waste glass powder was more refined compared with the reference specimens. The global solid fraction and pores volume were very similar for all of the studied series. The addition of waste glass powder reduced the chloride diffusion coefficient of the mortars, without worsening their behaviour regarding water absorption after immersion., This work was supported by the Conselleria de Educacion, Investigacion, Cultura y Deporte (presently re-named as Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) de la Generalitat Valenciana, Spain (grant code GV/2019/070); by the Agencia Nacional de Investigacion y Desarrollo de Chile (ANID; grant number FONDECYT REGULAR 1211135); by FCT-Foundation for Science and Technology, IP, within the scope of the R&D Unit Institute for sustainability and innovation in structural engineering-ISISE (UIDP/04029/2020); and by the ERDF through the COMPETE 2020 program, Portugal 2020 (project POCI-01-0247-FEDER-033990 iNBRail).