Pasar al contenido principal

GASIFICACION DE BIOMASA MEDIANTE TECNOLOGIAS DE CHEMICAL LOOPING PARA PRODUCCION DE GAS DE SINTESIS/H2 CON CAPTURA DE CO2

PRE2018-086217

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of synthesis gas production in the biomass chemical looping gasification process operating under auto-thermal conditions

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
12 figures, 2 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Biomass Chemical Looping Gasification (BCLG) is a promising route to obtain N2 free high purity syngas. In this work, heat and mass balances were solved to determine the auto-thermal operation conditions that maximize the syngas yield in a BCLG system. A Fe-based oxygen carrier and pine wood as fuel were considered for the simulation. Two methods to control the transference of oxygen between the air reactor (AR) and fuel reactor (FR) were analysed. Syngas yield was higher controlling the oxygen fed to the AR by the air flow (OCM-1) than controlling the oxygen supplied to the FR by the oxygen carrier circulation flow (OCM-2). The influence of different operating parameters, such as oxygen carrier transport capacity, preheating of gases fed to the system, steam/biomass ratio, fuel reactor temperature, was also analysed. It is noteworthy that working with OCM-2 it is necessary to optimize the amount of active phase in synthetic oxygen carriers or to dilute the natural oxygen carriers (ores, wastes) with an inert material to maintain realistic temperature difference values between reactors. Therefore, it is recommended to operate with the OCM-1 as it has the advantages of a more flexible operation and the possibility of obtaining pure N2., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the pre-doctoral fellowship (Ref: PRE-086217)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Fe content on the behavior of synthetic oxygen carriers in a 1.5 kW biomass chemical looping gasification unit

  • Samprón, Iván
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
11 figures, 3 tables.-- Supplementary data available., Biomass Chemical Looping Gasification (BCLG) is a promising technology that enables the production of high-purity and N2-free renewable syngas under autothermal operating conditions. In this work, the effect of the Fe-content (10, 20, and 25 wt% as Fe2O3) of three synthetic oxygen carriers supported on alumina was studied in a 1.5 kWth BCLG continuous unit. Similar syngas compositions and gasification parameters, biomass conversion, syngas yield, cold gas efficiency, etc., were obtained for the three oxygen carriers when analyzing the effect of oxygen-to-fuel ratio (λ) and fuel reactor (FR) temperature. Tars were also unaffected by the Fe-content, the increase in the FR temperature being the only parameter that allowed their reduction. A deep characterization of the oxygen carriers showed that the increase of Fe-content in the oxygen carrier promoted the migration of iron to the outer layer of particles, being detached of them. Lifetimes of 900, 350 and 100 h (corresponding to approximately 4500, 1750 and 500 cycles) were found for the oxygen carriers with 10 wt%, 20 wt% and 25 wt% of iron oxide, respectively. Therefore, among the three oxygen carrier tested, the one composed by a 10% of Fe2O3 was shown to be the most suitable for BCLG, providing the longest lifetime whereas the same syngas composition and tar removal could be obtained regardless of the Fe-content., This work was supported by ENE2017-89473-R AEI/FEDER, UE. I. Samprón thanks to the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for the PRE2018-086217 pre-doctoral fellowship., Peer reviewed