Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Ultrapure Green High Photoluminescence Quantum Yield from FAPbBr3 Nanocrystals Embedded in Transparent Porous Films

  • Romero-Pérez, C.
  • Fernández Delgado, Natalia
  • Herrera Collado, Miriam
  • Calvo, M.E.
  • Míguez, H.
Achieving highly transparent and emissive films based on perovskite quantum dots (PQDs) is a challenging task since their photoluminescence quantum yield (PLQY) typically drops abruptly when they are used as building blocks to make a solid. In this work, we obtain highly transparent films containing FAPbBr3 quantum dots that display a narrow green emission (λ = 530 nm, full width at half-maximum (FWHM) = 23 nm) with a PLQY as high as 86%. The method employed makes use of porous matrices that act as arrays of nanoreactors to synthesize the targeted quantum dots within their void space, providing both a means to keep them dispersed and a protective environment. Further infiltration with poly(methyl methacrylate) (PMMA) increases the mechanical and chemical stability of the ensemble and serves to passivate surface defects, boosting the emission of the embedded PQD and significantly reducing the width of the emission peak, which fulfills the requirements established by the Commission Internationale de l’Éclairage (CIE) to be considered an ultrapure green emitter. The versatility of this approach is demonstrated by fabricating a color-converting layer that can be easily transferred onto a light-emitting device surface to modify the spectral properties of the outgoing radiation.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Ion beam induced secondary electron tomography of acrylonitrile-styrene-acrylate/polycarbonate polymer blends for fused filament fabrication and injection moulding

  • Hernández Saz, Jesús
  • Moreno Sánchez, Daniel
  • Valencia Liñán, Luisa María
  • Gómez, Y.
  • Molina Rubio, Sergio Ignacio
  • Herrera Collado, Miriam
Polymer blending is an interesting strategy to broaden the combination of properties available for a variety of applications. To understand the behaviour of the new materials obtained as well as the influence of the fabrication parameters used, methods to analyse the distribution of polymers in the blend with resolution below the micrometer are required. In this work, we demonstrate the capability of focused ion beam (FIB) tomography to provide 3D information of the polymer distribution in objects obtained by blending acrylonitrile-styrene-acrylate (ASA) with polycarbonate (PC) (50 wt%), fabricated by Fused Filament Fabrication (FFF) and by Injection Moulding (IM). For this, ion beam induced secondary electron (iSE) images show the capability to distinguish unequivocally the two phases in the blend, providing enough contrasts to perform the 3D experiment. Additionally, Monte Carlo simulations show that the lateral spread for incident electrons in PC is 61.7 nm and for Ga+ ions of 26.2 nm, evidencing a better spatial resolution in iSE imaging. The sputtering rate under the ion beam has been quantified for both neat ASA and neat PC to find optimal parameters for the iSE tomography, resulting in a current of 0.05 nA and a dwell time of 3 µs. Our results reveal significant differences in the morphology of ASA/PC blends depending on the fabrication method. Blends obtained by FFF exhibit strong directionality and a co-continuous morphology, whereas IM objects present a droplet-matrix structure. Also, the interface area between the ASA and PC is quantified to be of 3200 μm² for the FFF sample and 1400 μm² for the IM sample, approximately double in FFF than in IM. The reasons for the different morphologies obtained in the studied blends and possible effects in their mechanical properties are discussed
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Intense and Stable Blue Light Emission From CsPbBr3/Cs4PbBr6 Heterostructures Embedded in Transparent Nanoporous Films

  • Romero-Pérez, Carlos
  • Fernández Delgado, Natalia
  • Herrera Collado, Miriam
  • Calvo, Mauricio E.
  • Míguez, H.
Lead halide perovskite nanocrystals are attractive for light emitting devices both as electroluminescent and color-converting materials since they combine intense and narrow emissions with good charge injection and transport properties. However, while most perovskite nanocrystals shine at green and red wavelengths, the observation of intense and stable blue emission still remains a challenging target. In this work, a method is reported to attain intense and enduring blue emission (470–480 nm), with a photoluminescence quantum yield (PLQY) of 40%, originating from very small CsPbBr3 nanocrystals (diameter < 3 nm) formed by controllably exposing Cs4PbBr6 to humidity. This process is mediated by the void network of a mesoporous transparent scaffold in which the zero-dimensional Cs4PbBr6 lattice is embedded, which allows the fine control over water adsorption and condensation that determines the optimization of the synthetic procedure and, eventually, the nanocrystal size. The approach provides a means to attain highly efficient transparent and stable blue light-emitting films that complete the palette offered by perovskite nanocrystals for lighting and display applications.