Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Properties and perspective of using deep eutectic solvents for hydrometallurgy metal recovery

  • Martín, M. I.
  • García-Díaz, Irene
  • López Gómez, Félix Antonio
The rapid industrialization and energy transition, as well as social pressure is increasing the current needs for metals. This results in an increasing demand, so the exploitation of more natural resources. In this scenario, a current alternative to minimise the lack of resource is the recycling of industrial waste and by-products, such as electrical and electronic waste, lithium batteries, solar panels, blast furnace slag, etc. Many articles focus on recovery of metals by hydrometallurgical methods are published. Currently, one of the great scientific challenges is to minimize the environmental impact of these recovery methods. Deep Eutectic Solvents (DESs) are emerging as an environmentally friendly alternative for the recovery of metals from industrial waste and by-products due to their greener properties. This is entailing an increasing number of scientific publications in the area. This review article collects the publications and highlights the relevance of the use of these solvents in metal recovery from industrial waste and by-products by hydrometallurgical methods, showing the main disadvantages of its use in the area. As well as, the possibility to adjust their physico-chemical properties according to their application., The authors are grateful to the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast-CSIC) for the financial support Dr. M.I. Martín through project (n° 20219PT055) and to the Ministry of Science and Innovation for the contract PTA2020-018866-I of Dr. I. García-Díaz. This work is part of the BATERURGIA project (Misiones CDTI Programme Ref. MIG-20221014) and has received Next Generation EU funding (Recovery, Transformation and Resilience Plan)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring titanium niobium oxides recovered from columbotantalite mineral as lithium-ion batteries electrodes

  • Sotillo, Belén
  • Calbet, Joaquín
  • Álvarez-Serrano, Inmaculada
  • García-Díaz, Irene
  • Fernández, Paloma
  • López Gómez, Félix Antonio
Titanium niobium oxides (TNO) are chemically recovered from a mineral composed of cassiterite, columbotantalite, rutile and wollastonite. The process involves a series of steps, including pyrometallurgical processes, leaching, and liquid-liquid extraction. It takes advantage of the naturally occurring Ti in the extracted mineral, avoiding the separation of Ti and Nb to directly obtain the valuable Ti–Nb–O compounds. Two compositions can be obtained (TiNbO or TiNbO, named TNO-cal and TNO-black, respectively) depending on the thermal treatment after the chemical separation from the original mineral. These compounds have been characterized to describe their composition, morphology and crystallographic properties. The recovered material, without any further purification or functionalization, has been studied as anodes in Lithium-ion batteries (LIBs). Different electrochemical behavior has been observed for voltage ranges of 1–3 V and 0.01–3 V, being the second range which gives best results. In the 1–3V range, TNO-black exhibits a reversible capacity of up to 101.4 mA h g at 1C and maintains 97 % capacity retention after 200 cycles, this is mainly due to Li + insertion/de-insertion processes. Additionally, when expanding the voltage range down to 0.01V, TNO-black displays a specific capacity of approximately 139.1 mA h g after 200 cycles at 1C, whereas TNO-cal reaches a specific capacity of 169 mA h g. Extended cycling experiments at a 1C rate for both electrodes reveal that after 200 cycles samples deliver efficiencies relative to the maximum discharge capacity values of 83.4 % (TNO-cal) and 64.4 % (TNO-black), with mean coulombic efficiencies of 97.5 %. These results demonstrate that the recovered materials can effectively function as anodes for LIBs, offering promising application potential, despite the presence of residual silica from the mining process., The authors are grateful to the Comunidad de Madrid for support via the Project PR65/19–22464 (Proyectos de I + D para jóvenes doctores). The authors are grateful to the CSIC for support via the Project RCMETALS Ref.202260E098. To the Spanish Ministry of Science and Innovation for the contract PTA2020-018866-I of Dr. I. García-Díaz. Authors thank the X-ray diffraction and electron microscopy CAI centers of UCM.