Pasar al contenido principal

DESARROLLO DE UN MATERIAL BIODEGRABABLE NANOCOMPUESTO PARA LA FABRICACIÓN DE TUBOS FLEXIBLES DESTINADOS AL ENVASADO DE COSMÉTICOS.

PTQ-11-04733

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Contratación e Incorporación de RRHH
Subprograma INNCORPORA
Convocatoria Torres Quevedo
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Recursos Humanos para la Investigación
Centro beneficiario FERRO SPAIN SA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Melt grafting of sepiolite nanoclay onto poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by reactive extrusion with multi-functional epoxy-based styrene-acrylic oligomer

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Montanes, Nestor|||0000-0001-6070-127X
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This paper deals with grafting of sepiolite nanoclay onto poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) biopolymer by melt compounding. Reactive extrusion was performed in a twin-screw extruder in the presence of an epoxy-based styrene-acrylic oligomer (ESAO). The chemical interaction of sepiolite with P(3HB-co-4HB) were investigated using Fourier transform infrared (FTIR) spectroscopy. A novel grafting mechanism was proposed based on the multiple epoxy groups present in the reactive coupling agent. Epoxy ring-opening generated, on the one hand, the formation of alkoxy silanes bonds with the silanol groups exposed on the external surface of pristine sepiolite. On the other hand, ester bonds were produced with the terminal acid groups of the biopolymer chains. The newly formed sepiolite-grafted P(3HB-co-4HB) (sepiolite-g-P(3HB-co-4HB)) nanocomposite showed higher thermal, thermomechanical, and mechanical performance than the equivalent ungrafted nanocomposite. Melt grafting of sepiolite at different weight contents (1, 3, and 5 wt.-%) interestingly increased the thermal stability and stiffness of P(3HB-co-4HB) without impairing its ductility and toughness., The Spanish Ministry of Economy and Competitiveness is acknowledged for funding support through the research project MAT2014-59242-C2-1-R and the Torres Quevedo program of Dr. Torres-Giner (PTQ-11-04733). Quiles-Carrillo also thanks "Generalitat Valenciana" for his FPI grant (ACIF/2016/182). The authors thank Pr. Chris Sammon from Sheffield Hallam University for his support during FTIR characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Injection-molded parts of polypropylene/multi-wall carbon nanotubes composites with an electrically conductive tridimensional network

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Chiva-Flor, Alberto
  • Feijoo, José Luis
[EN] Polypropylene-based composites filled with multi-wall carbon nanotubes (MWCNTs), ranging from 1 to 6 wt%, were obtained by injection molding from a previous masterbatch compounded by twin-screw extrusion (TSE). Resultant electrical percolation phenomenon was related to the ultrathin structure of the carbon¿based fillers and the high dispersion achieved in the thermoplastic matrix. In particular, conductivity experiments showed a threshold value of 3 wt% (1.3 vol%) of MWCNTs for percolation to occur. Electrical percolation was achieved as a result of the formation of an interconnected three¿dimensional structure compromising a top average inter¿nanotube distance of about 493 nm among isolated nanotubes in polypropylene. The current work is hoped to bear significance toward understanding of the electrical performance for industrial ultrathin carbon black¿based polyolefin composites., The Career and Employment Office of the UPV is acknowledged for the collaboration through the Educational Cooperation Programs. Thanks are also due to Begoña Galindo from AIMPLAS (Paterna, Spain) for supplying raw materials and to UJI-SCIC for the support during the morphological characterization on the composites pieces.