Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

The SMARTCOCO design guide for hybrid concrete-steel structures

  • Somja, Hugues
  • Hjiaj, Mohammed
  • Nguyen, Quang Huy
  • Plumier, André
  • Degee, Hervé
[EN] Standard buildings in steel and in reinforced concrete are constructed by two different industrial sectors with little interaction. Even steel-concrete composite buildings remain designed as steel structures, with a limited benefit of the presence of concrete slabs. For some years however, a more integrated design between both materials is used, merely in high rise and heavy loaded structures. This new trend is not supported by actual standards that give little guidance for the specific arrangements that come from this new practice. The RFCS SMARTCOCO research project is intended to fill these gaps in knowledge and provide design guidance for some composite elements covered neither by Eurocode 2 nor by Eurocode 4 : composite columns or walls reinforced by several fully encased steel sections, reinforced concrete columns reinforced by one steel section over the height of one storey and concrete flat slabs or beams connected to columns or walls by means of steel shear keys. Gaps in knowledge are mostly related to force transmission between concrete and embedded steel profiles. A generic design approach has been developed and then used to design test specimens. The results have been used to calibrate the design proposals. The output is a design guide which complements Eurocode 2 and 4., This paper was developed in the frame of the SMARTCOCO project funded by RFCS, the Research Fund for Coal and Steel of the European Commission, Research grant agreement RFSR-CT-2012-00031 Smartcoco. The companies BESIX and ArcelorMittal are also acknowledged for their involvement in the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Strut-and-tie model for the support of steel beams crossing concrete beams

  • Marie, Frédéric
  • Somja, Hugues
[EN] Steel and concrete construction can still be regarded as two distinct industrial sectors leading to separated design procedures. Even steel-concrete composite buildings remain designed as steel structures, with a limited benefit of the presence of concrete slabs. For some years however, a more integrated design between both materials is investigated. It tries to combine them in order to take advantage from their respective qualities : the high resistance of the steel on one hand and the low cost and good fire resistance of the concrete on the other hand, for example. One of the advantages of the concrete is also the easiness in the fabrication of joints, thanks to the monolithic nature of the concrete cast in place, whereas the metallic joints by bolting or welding ask for more technical work, and represent a non-negligible part of the cost of a structure. It is therefore rather natural, in a hybrid concrete-steel conception, to try to use this advantage of the concrete. In this context, this article presents a work that was made in the RFCS SMARTCOCO project. It focuses on the design of the support of a steel secondary beam crossing a primary beam in concrete, by simple direct contact. On the basis of an experimental campaign comprising five full-scale tests, the angle of diffusion of the forces and the distribution of the stresses in the stirrups are studied and a specific strut-and-tie model is developed. Specimens of this campaign consist of a simply supported concrete beam crossed in its middle by a steel profile, with or without stiffeners, loaded by two jacks, one at each end of the steel profile. First the experimental campaign is described. Then, internal stresses are compared with the predictions of a strut and tie model deduced from elastic stress trajectories. Finally, simplified design guidance is deduced., This paper was developed in the frame of the SMARTCOCO project funded by RFCS, the Research Fund for Coal and Steel of the European Commission, Research grant agreement RFSR-CT-2012-00031 Smartcoco. The companies BESIX and ArcelorMittal are also acknowledged for their involvement in the project.