Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

On the site-level suitability of biomass models

  • Pérez Cruzado, César
  • Fehrmann, Lutz
  • Magdon, Paul
  • Cañellas Rey de Viñas, Isabel
  • Sixto Blanco, Hortensia
  • Kleinn, Christoph
Tree biomass estimates in environmental studies are based on allometric models, which are known to vary with species, site, and other forest characteristics. The UNFCCC published a guideline to evaluate the appropriateness of biomass models before application, but it misleads the concept of model suitability and does also allow the selection of models with systematic deviations in the predictions. Here we present an alternative approach based on non-parametric techniques. The approach was tested for pure stands, but this methodology is likewise applicable to mixed forests. The proposed tests perform well in rejecting a model if the predictions for the targeted population are systematically deviant. It is demonstrated that the suitability of an allometric model is a matter of accuracy. The proposed method also allows localizing the model. The presented approach can improve the transparency of global forest monitoring systems and can be implemented with relatively small effort.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Improving biomass estimation in a Populus short rotation coppice plantation

  • Oliveira Rodríguez, Nerea de
  • Rodríguez Soalleiro, Roque
  • Hernández, María José
  • Cañellas Rey de Viñas, Isabel
  • Sixto Blanco, Hortensia
  • Pérez Cruzado, César
Short Rotation Coppice (SRC) plantations are important to biomass supply in the biomass market. The biomass stocks estimations should be based on robust models that allow the most accurate estimations. We have evaluated the changes in allometry for the estimation of biomass production at individual stool level in a short rotation, high density poplar plantation under a coppice system during two rotations of three years. The plantation was established in central-northern Spain, with a density of 17,316 stools ha−1. The influence of different factors in the allometry has been evaluated to improve the methodology for more robust biomass prediction. In an SRC system, the influence of age was more pronounced in the first year after each coppicing than in subsequent years of the cycle. Our findings suggest that this feature of nature must be accommodated in the modelling procedure either through the model formulation (decreasing the parameter variability with the inclusion of age as a dummy predictor variable) or by selecting the sample according to the stage of development of the above-ground biomass (which will depend on the goals of the predictions). The minimum sample size proposed to construct a model capable of predicting biomass regardless of age in SRC was 50 trees. Furthermore, the uncertainty was quantified in two models for total above-ground dry woody biomass, the first based only on the basal diameter and the other on the basal diameter along with the number of shoots per stool; the inclusion of the latter was advisable to increase the accuracy and reduce the mean deviation in biomass predictions at different ages.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Productivity model and reference diagram for short rotation biomass crops of poplar grown in Mediterranean environments

  • Oliveira Rodríguez, Nerea de
  • Sixto Blanco, Hortensia
  • Cañellas Rey de Viñas, Isabel
  • Rodríguez Soalleiro, Roque
  • Pérez Cruzado, César
A Reference Diagram (RD) was constructed for first rotations of the Euroamerican poplar ‘I-214’ grown as short rotation coppice (SRC). Data from 144 plots, established in eleven sites in Mediterranean environments, were used to develop the model. The density at establishment of the plantations ranged between 6666 and 33,333 stools ha−1, covering the usual densities ranges used in short rotation forestry (SRF). The RD was based on a density-independent mortality model that relates the density of living stools to the average height of dominant shoot and the initial plantation density, and it includes a system of two simultaneously fitted equations relating a) quadratic mean basal diameter of dominant shoots to the average height of dominant shoot and the final density, and b) total above-ground woody dry biomass to quadratic mean basal diameter and final density. The isolines in the RD represented mortality, quadratic mean basal diameter of dominant shoots and total above-ground woody dry biomass at the end of a first rotation of three years. The final yield in terms of biomass ranged from 1 to 85 Mg dm ha−1. The RD enables rapid and straightforward comparison of different situations, both at planting and at harvesting, and is a useful tool, based on a wide range of empirical data, for management and decision making regarding short rotation poplar crops.
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Interpreting genotype-by-environment interaction for biomass production in hybrid poplars under short-rotation coppice in Mediterranean environments

  • Sixto, Hortensia
  • Gil, Paula M.
  • Ciria, Pilar
  • Camps, Francesc
  • Cañellas, Isabel
  • Voltas, Jordi
Understanding genotype 9 environment interaction (GEI) is crucial to optimize the deployment of clonal material to field conditions in short-rotation coppice poplar plantations. Hybrid poplars are grown for biomass production under a wide range of climatic and edaphic conditions, but their adaptive performance in Mediterranean areas remains poorly characterized. In this work, site regression (SREG) and factorial regression mixed models are combined to gain insight into the nature and causes underlying GEI for biomass production of hybrid poplar clones. SREG addresses the issue of clonal ecommendation in multi-environment trials through a biplot representation that visually identifies superior genotypes. Factorial regression, alternatively, involves a description of clonal reaction to the environment in terms of physical variables that directly affect productivity. Initially, SREG aided in identifying cross-over interactions that often involved hybrids of different taxonomic background. Factorial regression then selected latitude, mean temperature of the vegetative period (MTVP) and soil sand content as main site factors responsible for differential clonal adaptation. Genotypic responses depended strongly on taxonomic background: P. deltoides Bartr. ex Marsh. 9 P. nigra L. clones showed an overall positive sensitivity to increased MTVP and negative sensitivity to increased sand content, whereas the opposite occurred for P. trichocarpa Torr. & Gray 9 P. deltoides clones; the three-cross hybrid [(P. deltoides 9 P. trichocarpa) 9 P. nigra] often displayed an intermediate performance. This information can contribute toward the identification and biological understanding of adaptive characteristics relevant for poplar breeding in Mediterranean conditions and facilitate clonal recommendation at eco-regional level., info:eu-repo/semantics/publishedVersion
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Interpreting genotype-by-environment interaction for biomass production in hybrid poplars under short-rotation coppice in Mediterranean environments

  • Sixto, Hortensia
  • Gil, Paula M.
  • Ciria, Pilar
  • Camps, Francesc
  • Cañellas, Isabel
  • Voltas Velasco, Jordi
Understanding genotype × environment interaction (GEI) is crucial to optimize the deployment of clonal material to field conditions in short‐rotation coppice poplar plantations. Hybrid poplars are grown for biomass production under a wide range of climatic and edaphic conditions, but their adaptive performance in Mediterranean areas remains poorly characterized. In this work, site regression (SREG) and factorial regression mixed models are combined to gain insight into the nature and causes underlying GEI for biomass production of hybrid poplar clones. SREG addresses the issue of clonal recommendation in multi‐environment trials through a biplot representation that visually identifies superior genotypes. Factorial regression, alternatively, involves a description of clonal reaction to the environment in terms of physical variables that directly affect productivity. Initially, SREG aided in identifying cross‐over interactions that often involved hybrids of different taxonomic background. Factorial regression then selected latitude, mean temperature of the vegetative period (MTVP) and soil sand content as main site factors responsible for differential clonal adaptation. Genotypic responses depended strongly on taxonomic background: P. deltoides Bartr. ex Marsh. × P. nigra L. clones showed an overall positive sensitivity to increased MTVP and negative sensitivity to increased sand content, whereas the opposite occurred for P. trichocarpa Torr. & Gray × P. deltoides clones; the three‐cross hybrid [(P. deltoides × P. trichocarpa) × P. nigra] often displayed an intermediate performance. This information can contribute toward the identification and biological understanding of adaptive characteristics relevant for poplar breeding in Mediterranean conditions and facilitate clonal recommendation at eco‐regional level., This research was funded by MINECO (Spain) throughout the project RTA2008-00025-C02-01 and RTA2011-00006-00-00. We also acknowledge the collaboration of project AGL2009-11006. We would like to thank the public company SOMACYL for hosting one of the experimental plots. We are also grateful to Juan Pablo de la Iglesia and Ana Parras for their technical support throughout the experiment.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An economic overview of Populus spp. in Short Rotation Coppice systems under Mediterranean conditions: An assessment tool for decision-making

  • Fuertes Sánchez, Alicia
  • Oliveira, Nerea
  • Cañellas, Isabel
  • Sixto Blanco, Hortensia Concepción
  • Rodríguez-Soalleiro, Roque
13 Pág. Instituto de Ciencias Forestales (ICIFOR), Poplar Short Rotation Coppices can provide lignocellulosic raw material, promote employment in rural areas, contribute to achieving a low carbon bioeconomy and supply environmental benefits. Nevertheless, the economic feasibility of these plantations is a matter of concern and hampers the expansion of commercial initiatives. In this regard, this work aims to identify the most critical cost factors of poplar plantations under Mediterranean conditions. Data from an extensive network located at 30 different sites were used, in particular, detailed cost data for 2 rotations was available for 6 sites within the network. This study evaluates the critical factors that affect profitability, analysing the influence of the discount rate and biomass price under two productive scenarios derived from the network and evaluated as green biomass yield for the first rotation: Baseline (30.56 Mg ha−1 yr−1) and an Optimum (56.52 Mg ha−1 yr−1). Net Present Value after 12 years (4 rotations of 3 years each), ranges from −1105.54 € ha−1 (Baseline) to 9620.30 € ha−1 (Optimum). According to the findings of this study, profitability of poplar plantations will be achieved by ensuring optimum productivity, through an increase in current market prices (40 € Mg-1) or by valuing the ecosystem services, which are not currently quantified. Sensitivity analyses were performed for the most critical cost factors: land rent (31.88 %), irrigation (16.61 %), and cut-and-chip harvesting (11.87 %), revealing that the influence of the former factor was decisive. Management diagrams that combine the discount rate, yield and biomass price are provided as tools for decision makers., This work has been financially supported by the Spanish Ministry of Economic Affairs and Digital Transformation (MINECO), project RTA2017-00015-C02-01. The experimental PPN and the economic data were partially supported by the PSE-On Cultivos, Decocel, RTA-2011-00006, RTA2014-0007 and the LIGNOCROP project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How can leaf-litter from different species growing in short rotation coppice contribute to the soil nutrient pool?

  • González, Isabel
  • Sixto Blanco, Hortensia Concepción
  • Rodríguez-Soalleiro, Roque
  • Cañellas, Isabel
  • Fuertes Sánchez, Alicia
  • Oliveira, Nerea
16 Pág. Instituto de Ciencias Forestales, Quantifying leaf-litter and the potential contribution of essential nutrients to the soil is key to guaranteeing the sustainability of forest systems, especially in plantations under short rotation coppice, insofar as it can condition crop management such as the requirement for nutritional amendments. Nutrient cycling is dependent on production as well as litter decomposition, so to compare the different strategies of the species in nutrient recycling it is important not only to determine the quality and quantity of leaf litter, but also the decomposition rate dynamics and the consequent potential incorporation of organic matter and nutrients into the soil. Therefore, this work aims to quantify and analyze the dynamics of leaf-litter as well as the retranslocation rate, to assess the decomposition rate of the foliar biomass and its nutrient concentrations, and finally, to assess the evolution of leaf-litter quality. For these purposes, eight genotypes were considered in this study: Populus deltoides (‘Baldo’), Populus × canadensis (‘Ballottino’, ‘I-214′, ‘Orion’ and ‘Oudenberg’); Platanus × hispanica (‘Girona’), Salix matsudana × Salix spp. (‘Levante’) and Robinia pseudoacacia (‘Nyirsegi’). The plantation was established in central Spain with a density of 10,000 cuttings ha−1. Three rotations of 3 years each were applied, this study being carried out during the first growing season of the second rotation. Although the leaf fall dynamics were similar among the different species, the production and quality of the leaf-litter were highly species specific. Different strategies were identified; greater retranslocation of N and P being found in poplar, plane tree or only of P in the case of black locust as a conservation strategy, although lower retranslocation of all nutrients was observed in willow, which means that the leaf litter of the latter is very rich in nutrients. While willow, black locust or even some genotypes of poplar are capable of releasing many of the nutrients to the soil during decomposition, plane tree released a smaller variety of nutrients, N, P and Mg being immobilized in the leaf-litter. From the perspective of conserving the soil fertility resulting from the decomposition of leaf-litter, the plantations of species with the highest decomposition rates, such as black locust and willow, were found to be the most recommendable. However, the immobilization of some nutrients in the leaf-litter during the decomposition process could satisfy the nutritional requirements of these species in the medium and long term, thus an advantageous strategy could be to mix species with different decomposition dynamics., This research was funded by MINECO (Spain) through the framework of the project’s RTA2011-00006-C01, RTA2014-00007-C01, and RTA2017-00015-CO1, co-financed with funds from FEDER., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interpreting genotype-by-environment interaction for biomass production in hybrid poplars under short-rotation coppice in Mediterranean environments

  • Sixto, Hortensia
  • Gil, Paula M.
  • Ciria, Pilar
  • Camps, Francesc
  • Cañellas, Isabel
  • Voltas Velasco, Jordi
Understanding genotype × environment interaction (GEI) is crucial to optimize the deployment of clonal material to field conditions in short‐rotation coppice poplar plantations. Hybrid poplars are grown for biomass production under a wide range of climatic and edaphic conditions, but their adaptive performance in Mediterranean areas remains poorly characterized. In this work, site regression (SREG) and factorial regression mixed models are combined to gain insight into the nature and causes underlying GEI for biomass production of hybrid poplar clones. SREG addresses the issue of clonal recommendation in multi‐environment trials through a biplot representation that visually identifies superior genotypes. Factorial regression, alternatively, involves a description of clonal reaction to the environment in terms of physical variables that directly affect productivity. Initially, SREG aided in identifying cross‐over interactions that often involved hybrids of different taxonomic background. Factorial regression then selected latitude, mean temperature of the vegetative period (MTVP) and soil sand content as main site factors responsible for differential clonal adaptation. Genotypic responses depended strongly on taxonomic background: P. deltoides Bartr. ex Marsh. × P. nigra L. clones showed an overall positive sensitivity to increased MTVP and negative sensitivity to increased sand content, whereas the opposite occurred for P. trichocarpa Torr. & Gray × P. deltoides clones; the three‐cross hybrid [(P. deltoides × P. trichocarpa) × P. nigra] often displayed an intermediate performance. This information can contribute toward the identification and biological understanding of adaptive characteristics relevant for poplar breeding in Mediterranean conditions and facilitate clonal recommendation at eco‐regional level., This research was funded by MINECO (Spain) throughout the project RTA2008-00025-C02-01 and RTA2011-00006-00-00. We also acknowledge the collaboration of project AGL2009-11006. We would like to thank the public company SOMACYL for hosting one of the experimental plots. We are also grateful to Juan Pablo de la Iglesia and Ana Parras for their technical support throughout the experiment.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interpreting genotype-by-environment interaction for biomass production in hybrid poplars under short-rotation coppice in Mediterranean environments

  • Sixto, Hortensia
  • Gil, Paula M.
  • Ciria, Pilar
  • Camps, Francesc
  • Cañellas, Isabel
  • Voltas, Jordi
Understanding genotype 9 environment interaction (GEI) is crucial to optimize the deployment of clonal material to field conditions in short-rotation coppice poplar plantations. Hybrid poplars are grown for biomass production under a wide range of climatic and edaphic conditions, but their adaptive performance in Mediterranean areas remains poorly characterized. In this work, site regression (SREG) and factorial regression mixed models are combined to gain insight into the nature and causes underlying GEI for biomass production of hybrid poplar clones. SREG addresses the issue of clonal ecommendation in multi-environment trials through a biplot representation that visually identifies superior genotypes. Factorial regression, alternatively, involves a description of clonal reaction to the environment in terms of physical variables that directly affect productivity. Initially, SREG aided in identifying cross-over interactions that often involved hybrids of different taxonomic background. Factorial regression then selected latitude, mean temperature of the vegetative period (MTVP) and soil sand content as main site factors responsible for differential clonal adaptation. Genotypic responses depended strongly on taxonomic background: P. deltoides Bartr. ex Marsh. 9 P. nigra L. clones showed an overall positive sensitivity to increased MTVP and negative sensitivity to increased sand content, whereas the opposite occurred for P. trichocarpa Torr. & Gray 9 P. deltoides clones; the three-cross hybrid [(P. deltoides 9 P. trichocarpa) 9 P. nigra] often displayed an intermediate performance. This information can contribute toward the identification and biological understanding of adaptive characteristics relevant for poplar breeding in Mediterranean conditions and facilitate clonal recommendation at eco-regional level., info:eu-repo/semantics/publishedVersion