Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Assessing the textural defect of pastiness in dry-cured pork ham using chemical, microstructural, textural and ultrasonic analyses

  • Contreras, M.
  • Benedito, J.
  • Quiles, A.
  • Lorenzo, J. M.
  • Fulladosa, E.
  • Gou, P.
  • Garcia-Perez, J. V.
The dry-cured pork ham industry lacks non-destructive quality control techniques able to characterize relevant textural defects, such as pastiness or softness. The aim of this study is to analyze the feasibility of using different destructive and non-destructive techniques to characterize pastiness in dry-cured ham. Dry-cured ham processing was modified in order to induce different pastiness intensities over a wide range of moisture and salt contents. Afterwards, pastiness was assessed by sensory analysis and samples classified as non-pasty, medium-pasty and highly-pasty. Finally, chemical, textural, microstructural (LM and TEM) and ultrasonic analyses (velocity and attenuation coefficient) were carried out. Samples with a high degree of pastiness experienced an increase of 16.8% and 16.7% as regards the proteolysis index and relaxation capacity, respectively, and a 67.7% decrease in hardness compared to non-pasty hams. The microstructural analysis revealed that pastiness brought about great structural degradation. Ultrasonic velocity was significantly related to the salt (r = 0.79) and moisture contents (r = 0.69), but no influence of pastiness was found on the velocity. However, the attenuation coefficient increased as the pastiness rose and could be considered as a useful parameter for characterizing this complex textural defect. Therefore, ultrasound could be used not only to carry out a non-destructive characterization of dry-cured ham composition but also to assess pastiness., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Computer image analysis for intramuscular fat segmentation in dry-cured ham slices using convolutional neural networks

  • Muñoz, I.
  • Gou, P.
  • Fulladosa, E.
Determination of intramuscular fat (IMF) content in dry cured meats is critical because it affects the sensory quality and consumer's acceptability. Recently, deep learning has become one of the most promising techniques in machine learning for image analysis. However, few applications in food products are found in the literature. This study presents the application of deep learning for the detection of intramuscular fat (IMF) in images of slices of dry cured ham. 8 convolutional neural networks (CNNs) have been studied and compared using segmented images (252 for training, 61 for validation and 62 for testing). The performance was compared to other simple CNNs. CNNs were able to segment IMF with an overall pixel accuracy of 0.99 and a recall and precision rates for fat near 0.82 and 0.84, respectively, using a limited number of training images. However, performance is affected by the quality of the ground truth due to the difficulty of labelling correctly pixels., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Texture characterization of dry-cured ham using multi energy X-ray analysis

  • Fulladosa, E.
  • Austrich, A.
  • Muñoz, I.
  • Guerrero, L.
  • Benedito, J.
  • Lorenzo, J.M.
  • Gou, P.
Multi energy X-ray sensors are able to differentiate and quantify X-rays of different energies. In contrast to conventional sensors, which simply record the overall energy of the X-rays whatever the energy of x-rays is, multi energy sensors provides a spectrum of the X-rays energies, which may be differently attenuated. In this study, the feasibility of this technology to detect changes in dry-cured ham slices after inducing proteolysis was evaluated. Effect of salt and water contents on the attenuation was also studied. In addition, the classification of commercial samples according to their proteolysis index was assessed. Results showed a decrease of attenuation for increasing proteolysis induction times (p<0.01) for all the regions of the spectrum (energy bands), but not with the same intensity, at any of the analysed acquisition conditions. Salt and water contents produced a significant (p<0.01) effect on the attenuation. Influence of salt content was higher than that of water content, and both affected the prediction of the proteolysis index. Classification score of commercial samples exhibited a limited discrimination capacity, showing the need for more sophisticated data analysis., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Effect of high pressure processing temperature on dry-cured hams with different textural characteristics

  • Coll-Brasas, E.
  • Arnau, J.
  • Gou, P.
  • Lorenzo, J.M.
  • García-Pérez, J.V.
  • Fulladosa, E.
High pressure processing is mainly used to eliminate pathogenic microorganisms and extend the shelf-life of dry-cured hams, but it also modifies its texture. These changes might be different depending on the initial textural characteristics. In this study, texture, colour and colour stability were evaluated after pressurization at 600 MPa during 6 min at 7 ºC, 20 ºC and 35 ºC in samples with different textural characteristics (no pastiness, medium and high pastiness groups). HP treatments produced an increase of hardness (F0) and lightness (L*) values and a decrease of softness/pastiness (Y2 and Y90) and redness (a*) values at any processing temperatures. However, the increase of F0 and L* values was more pronounced in non–pasty samples. In samples with high pastiness and softness, HP processing at high temperature (35ºC) reduced the intensity of pastiness. However, texture of hams with non-pasty texture might be negatively affected. Therefore, the optimal temperature of HP processing depends on the textural characteristics of dry-cured hams., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Formation of Zn-protoporphyrin during the elaboration process of non-nitrified serrano dry-cured hams and its relationship with lipolysis

  • Bou, Ricard
  • Llauger, Mar
  • Arnau, Jacint
  • Olmos, Alejandro
  • Fulladosa, Elena
This study assessed the ZnPP content, heme content, salt content, and instrumental color in the biceps femoris and semimembranosus muscles during the elaboration of Serrano dry-cured ham manufactured without the addition of nitrate and nitrite for 15 months. The effects of lipolysis and lipid oxidation on the content of Zn-protoporphyrin were also investigated in the biceps femoris. We found that the maximum formation of Zn-protoporphyrin occurred between end of resting and 6 months of processing, which coincides with temperature increase during processing and the end of salt equalization. Zn-protoporphyrin further increased in the biceps femoris until 9 months of processing but remained unchanged in the semimembranosus. Free fatty acid content increased till 6 months and then remained unchanged until the end of the process. These findings and those from an in vitro study reinforced the idea that the release of free fatty acids can promote the activity of the endogenous enzyme ferrochelatase and contribute to the formation of Zn-protoporphyrin from heme. However, the content of Zn-protoporphyrin decreased at the end of the processing, which may be due to the progression of lipid oxidation., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing the textural defect of pastiness in dry-cured pork ham using chemical, microstructural, textural and ultrasonic analyses

  • Contreras, M.
  • Benedito, J.
  • Quiles, A.
  • Lorenzo, J. M.
  • Fulladosa, E.
  • Gou, P.
  • Garcia-Perez, J. V.
The dry-cured pork ham industry lacks non-destructive quality control techniques able to characterize relevant textural defects, such as pastiness or softness. The aim of this study is to analyze the feasibility of using different destructive and non-destructive techniques to characterize pastiness in dry-cured ham. Dry-cured ham processing was modified in order to induce different pastiness intensities over a wide range of moisture and salt contents. Afterwards, pastiness was assessed by sensory analysis and samples classified as non-pasty, medium-pasty and highly-pasty. Finally, chemical, textural, microstructural (LM and TEM) and ultrasonic analyses (velocity and attenuation coefficient) were carried out. Samples with a high degree of pastiness experienced an increase of 16.8% and 16.7% as regards the proteolysis index and relaxation capacity, respectively, and a 67.7% decrease in hardness compared to non-pasty hams. The microstructural analysis revealed that pastiness brought about great structural degradation. Ultrasonic velocity was significantly related to the salt (r = 0.79) and moisture contents (r = 0.69), but no influence of pastiness was found on the velocity. However, the attenuation coefficient increased as the pastiness rose and could be considered as a useful parameter for characterizing this complex textural defect. Therefore, ultrasound could be used not only to carry out a non-destructive characterization of dry-cured ham composition but also to assess pastiness., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Texture characterization of dry-cured ham using multi energy X-ray analysis

  • Fulladosa, E.
  • Austrich, A.
  • Muñoz, I.
  • Guerrero, L.
  • Benedito, J.
  • Lorenzo, J.M.
  • Gou, P.
Multi energy X-ray sensors are able to differentiate and quantify X-rays of different energies. In contrast to conventional sensors, which simply record the overall energy of the X-rays whatever the energy of x-rays is, multi energy sensors provides a spectrum of the X-rays energies, which may be differently attenuated. In this study, the feasibility of this technology to detect changes in dry-cured ham slices after inducing proteolysis was evaluated. Effect of salt and water contents on the attenuation was also studied. In addition, the classification of commercial samples according to their proteolysis index was assessed. Results showed a decrease of attenuation for increasing proteolysis induction times (p<0.01) for all the regions of the spectrum (energy bands), but not with the same intensity, at any of the analysed acquisition conditions. Salt and water contents produced a significant (p<0.01) effect on the attenuation. Influence of salt content was higher than that of water content, and both affected the prediction of the proteolysis index. Classification score of commercial samples exhibited a limited discrimination capacity, showing the need for more sophisticated data analysis., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Formation of Zn-protoporphyrin during the elaboration process of non-nitrified serrano dry-cured hams and its relationship with lipolysis

  • Bou, Ricard
  • Llauger, Mar
  • Arnau, Jacint
  • Olmos, Alejandro
  • Fulladosa, Elena
This study assessed the ZnPP content, heme content, salt content, and instrumental color in the biceps femoris and semimembranosus muscles during the elaboration of Serrano dry-cured ham manufactured without the addition of nitrate and nitrite for 15 months. The effects of lipolysis and lipid oxidation on the content of Zn-protoporphyrin were also investigated in the biceps femoris. We found that the maximum formation of Zn-protoporphyrin occurred between end of resting and 6 months of processing, which coincides with temperature increase during processing and the end of salt equalization. Zn-protoporphyrin further increased in the biceps femoris until 9 months of processing but remained unchanged in the semimembranosus. Free fatty acid content increased till 6 months and then remained unchanged until the end of the process. These findings and those from an in vitro study reinforced the idea that the release of free fatty acids can promote the activity of the endogenous enzyme ferrochelatase and contribute to the formation of Zn-protoporphyrin from heme. However, the content of Zn-protoporphyrin decreased at the end of the processing, which may be due to the progression of lipid oxidation., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of high pressure processing temperature on dry-cured hams with different textural characteristics

  • Coll-Brasas, E.
  • Arnau, J.
  • Gou, P.
  • Lorenzo, J.M.
  • García-Pérez, J.V.
  • Fulladosa, E.
High pressure processing is mainly used to eliminate pathogenic microorganisms and extend the shelf-life of dry-cured hams, but it also modifies its texture. These changes might be different depending on the initial textural characteristics. In this study, texture, colour and colour stability were evaluated after pressurization at 600 MPa during 6 min at 7 ºC, 20 ºC and 35 ºC in samples with different textural characteristics (no pastiness, medium and high pastiness groups). HP treatments produced an increase of hardness (F0) and lightness (L*) values and a decrease of softness/pastiness (Y2 and Y90) and redness (a*) values at any processing temperatures. However, the increase of F0 and L* values was more pronounced in non–pasty samples. In samples with high pastiness and softness, HP processing at high temperature (35ºC) reduced the intensity of pastiness. However, texture of hams with non-pasty texture might be negatively affected. Therefore, the optimal temperature of HP processing depends on the textural characteristics of dry-cured hams., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Computer image analysis for intramuscular fat segmentation in dry-cured ham slices using convolutional neural networks

  • Muñoz, I.
  • Gou, P.
  • Fulladosa, E.
Determination of intramuscular fat (IMF) content in dry cured meats is critical because it affects the sensory quality and consumer's acceptability. Recently, deep learning has become one of the most promising techniques in machine learning for image analysis. However, few applications in food products are found in the literature. This study presents the application of deep learning for the detection of intramuscular fat (IMF) in images of slices of dry cured ham. 8 convolutional neural networks (CNNs) have been studied and compared using segmented images (252 for training, 61 for validation and 62 for testing). The performance was compared to other simple CNNs. CNNs were able to segment IMF with an overall pixel accuracy of 0.99 and a recall and precision rates for fat near 0.82 and 0.84, respectively, using a limited number of training images. However, performance is affected by the quality of the ground truth due to the difficulty of labelling correctly pixels., info:eu-repo/semantics/acceptedVersion